Ultra-large aluminum shape castings have been increasingly used in automotive vehicles,particularly in electric vehicles for light-weighting and vehicle manufacturing cost reduction.As most of them are structural comp...Ultra-large aluminum shape castings have been increasingly used in automotive vehicles,particularly in electric vehicles for light-weighting and vehicle manufacturing cost reduction.As most of them are structural components subject to both quasi-static,dynamic and cyclic loading,the quality and quantifiable performance of the ultra-large aluminum shape castings is critical to their success in both design and manufacturing.This paper briefly reviews some application examples of ultra-large aluminum castings in automotive industry and outlines their advantages and benefits.Factors affecting quality,microstructure and mechanical properties of ultra-large aluminum castings are evaluated and discussed as aluminum shape casting processing is very complex and often involves many competing mechanisms,multi-physics phenomena,and potentially large uncertainties that significantly influence the casting quality and performance.Metallurgical analysis and mechanical property assessment of an ultra-large aluminum shape casting are presented.Challenges are highlighted and suggestions are made for robust design and manufacturing of ultra-large aluminum castings.展开更多
We studied the effects of nanoparticles of organo-silane（NOS） compounds in the size range of20–80 nm on physical and mechanical properties in medium density fiberboard,and used NOS at four consumption levels of 0,5...We studied the effects of nanoparticles of organo-silane（NOS） compounds in the size range of20–80 nm on physical and mechanical properties in medium density fiberboard,and used NOS at four consumption levels of 0,50,100,and 150 g kg-1dry wood fibers.Density of all treatments was kept constant at 0.67 g cm-3.The water-repellent property of organo-silane significantly reduced water absorption（WA） and thickness swelling but mechanical properties declined due to the reduced proportion of wood-fiber as organo-silane was added to the matrix：the compression ratio of MDF panels and the integrity among wood-fibers both declined,resulting in reduced mechanical properties.We recommend use of 50 g of NOS/kg wood-fiber to improve WA and thickness swelling while retaining acceptable mechanical properties.展开更多
White rot fungi were optimized to cultivate highly active laccase. The characteristics of laccase incubated by continuous culture were compared with those of direct culture. The enzyme activity of laccase incubated by...White rot fungi were optimized to cultivate highly active laccase. The characteristics of laccase incubated by continuous culture were compared with those of direct culture. The enzyme activity of laccase incubated by continuous culture technology reached a higher value on the fifth day of the growth. The optimization incubation time of high activity laccase was the eleventh day. A large amount of highly active laccase can be obtained in a relatively short time by continuous culture to replace traditional laccase. After laccase treatment, the lignin composition of wood fibers were oxidation-catalyzed by laccase. The number of chemical-bonding points between the wood fibers was increased. The wood fibers treated by laccase were fabricated into boards and their mechanical properties improved with the laccase-incubation times. Compared with the fiberboards made from fibers that were pre-treated by laccase of incubation 5 days, the static bending strength of those that were pre-treated by laccase of incubation 11 days was increased by 18.95%, the elastic modulus was increased by 35.49%, and the internal bond strength was increased by 44.11%.展开更多
High entropy alloys(HEAs)possess good mechanical properties and a wide range of industrial applications.In this paper,phase formation prediction theory,microstructure,properties and preparation methods of light-weight...High entropy alloys(HEAs)possess good mechanical properties and a wide range of industrial applications.In this paper,phase formation prediction theory,microstructure,properties and preparation methods of light-weight HEAs(LWHEAs)were reviewed.The problems and challenges faced by LWHEAs development were analyzed.The results showed that many aspects are still weak and require investigation for future advanced alloys,such as clarification of the role of entropy in phase formation and properties of HEAs,improved definition and different generations division of HEAs,close-packed hexagonal(HCP)phase structure prediction and corresponding alloy design and fabrication.Finally,some suggestions were presented in this paper including in-depth research on formation mechanism of multi-component alloy phase and strengthening of large-scale HEA preparation methods via technology compounding and 3D printing technology.Also,there is a need for more research on the in-situ preparation of HEA coatings and films,as well as developing LWHEAs with superior strength and elevated temperature resistance or ultra-low temperature resistance to meet the requirements of future engineering applications.展开更多
文摘Ultra-large aluminum shape castings have been increasingly used in automotive vehicles,particularly in electric vehicles for light-weighting and vehicle manufacturing cost reduction.As most of them are structural components subject to both quasi-static,dynamic and cyclic loading,the quality and quantifiable performance of the ultra-large aluminum shape castings is critical to their success in both design and manufacturing.This paper briefly reviews some application examples of ultra-large aluminum castings in automotive industry and outlines their advantages and benefits.Factors affecting quality,microstructure and mechanical properties of ultra-large aluminum castings are evaluated and discussed as aluminum shape casting processing is very complex and often involves many competing mechanisms,multi-physics phenomena,and potentially large uncertainties that significantly influence the casting quality and performance.Metallurgical analysis and mechanical property assessment of an ultra-large aluminum shape casting are presented.Challenges are highlighted and suggestions are made for robust design and manufacturing of ultra-large aluminum castings.
基金conducted as a joint research projectfinanced by SRTTU(Iran)UPM(Malaysia)
文摘We studied the effects of nanoparticles of organo-silane（NOS） compounds in the size range of20–80 nm on physical and mechanical properties in medium density fiberboard,and used NOS at four consumption levels of 0,50,100,and 150 g kg-1dry wood fibers.Density of all treatments was kept constant at 0.67 g cm-3.The water-repellent property of organo-silane significantly reduced water absorption（WA） and thickness swelling but mechanical properties declined due to the reduced proportion of wood-fiber as organo-silane was added to the matrix：the compression ratio of MDF panels and the integrity among wood-fibers both declined,resulting in reduced mechanical properties.We recommend use of 50 g of NOS/kg wood-fiber to improve WA and thickness swelling while retaining acceptable mechanical properties.
基金funded by National Natural Science Foundation of China(31170515)Specialized Research Fund for the Doctoral Program of Higher Education of China(20130062110012)Undergraduate Training Program for Innovation and Entrepreneurship of Northeast Forestry University,China(201410225157)
文摘White rot fungi were optimized to cultivate highly active laccase. The characteristics of laccase incubated by continuous culture were compared with those of direct culture. The enzyme activity of laccase incubated by continuous culture technology reached a higher value on the fifth day of the growth. The optimization incubation time of high activity laccase was the eleventh day. A large amount of highly active laccase can be obtained in a relatively short time by continuous culture to replace traditional laccase. After laccase treatment, the lignin composition of wood fibers were oxidation-catalyzed by laccase. The number of chemical-bonding points between the wood fibers was increased. The wood fibers treated by laccase were fabricated into boards and their mechanical properties improved with the laccase-incubation times. Compared with the fiberboards made from fibers that were pre-treated by laccase of incubation 5 days, the static bending strength of those that were pre-treated by laccase of incubation 11 days was increased by 18.95%, the elastic modulus was increased by 35.49%, and the internal bond strength was increased by 44.11%.
基金Funded by the National Natural Science Foundation of China(No.51405510)。
文摘High entropy alloys(HEAs)possess good mechanical properties and a wide range of industrial applications.In this paper,phase formation prediction theory,microstructure,properties and preparation methods of light-weight HEAs(LWHEAs)were reviewed.The problems and challenges faced by LWHEAs development were analyzed.The results showed that many aspects are still weak and require investigation for future advanced alloys,such as clarification of the role of entropy in phase formation and properties of HEAs,improved definition and different generations division of HEAs,close-packed hexagonal(HCP)phase structure prediction and corresponding alloy design and fabrication.Finally,some suggestions were presented in this paper including in-depth research on formation mechanism of multi-component alloy phase and strengthening of large-scale HEA preparation methods via technology compounding and 3D printing technology.Also,there is a need for more research on the in-situ preparation of HEA coatings and films,as well as developing LWHEAs with superior strength and elevated temperature resistance or ultra-low temperature resistance to meet the requirements of future engineering applications.
