Simplified prediction model for lighting energy consumption in office building scheme design

At the scheme design stage,the potential of daylighting is significant due to the saving for electric lighting use. There are few simple tools for architects to optimize the daylighting design. Therefore,it is useful to develop a design guideline related to the evaluation of lighting energy saving potential and sunlight design strategies. This paper analyzes the impacts of different artificial lighting control methods and design parameters on daylighting. A direct correlation between lighting energy consumption and parameters such as orientations,window to wall ratio (WWR) and perimeter depth is established. A simplified prediction model is proposed to estimate lighting energy consumption with the given perimeter depth,WWR,and window transparency. Validation of the model is carried out compared with detailed lighting simulation software for an office building. After the variation analysis for these parameters,design advises for the daylighting design at scheme design phase are summarized.

Effects of connected automated vehicle on stability and energy consumption of heterogeneous traffic flow system

With the development of intelligent and interconnected traffic system,a convergence of traffic stream is anticipated in the foreseeable future,where both connected automated vehicle(CAV)and human driven vehicle(HDV)will coexist.In order to examine the effect of CAV on the overall stability and energy consumption of such a heterogeneous traffic system,we first take into account the interrelated perception of distance and speed by CAV to establish a macroscopic dynamic model through utilizing the full velocity difference(FVD)model.Subsequently,adopting the linear stability theory,we propose the linear stability condition for the model through using the small perturbation method,and the validity of the heterogeneous model is verified by comparing with the FVD model.Through nonlinear theoretical analysis,we further derive the KdV-Burgers equation,which captures the propagation characteristics of traffic density waves.Finally,by numerical simulation experiments through utilizing a macroscopic model of heterogeneous traffic flow,the effect of CAV permeability on the stability of density wave in heterogeneous traffic flow and the energy consumption of the traffic system is investigated.Subsequent analysis reveals emergent traffic phenomena.The experimental findings demonstrate that as CAV permeability increases,the ability to dampen the propagation of fluctuations in heterogeneous traffic flow gradually intensifies when giving system perturbation,leading to enhanced stability of the traffic system.Furthermore,higher initial traffic density renders the traffic system more susceptible to congestion,resulting in local clustering effect and stop-and-go traffic phenomenon.Remarkably,the total energy consumption of the heterogeneous traffic system exhibits a gradual decline with CAV permeability increasing.Further evidence has demonstrated the positive influence of CAV on heterogeneous traffic flow.This research contributes to providing theoretical guidance for future CAV applications,aiming to enhance urban road traffic efficiency and alleviate congestion.

Exploring the impact of economic growth and energy consumption on SO_(2) emissions in China based on the Environmental Kuznets Curve hypothesis

This study aims to analysis the influence of economic growth(EG)and energy consumption(EC)on sulfur dioxide emissions(SE)in China.Accordingly,this study explores the link between EG,EC,and SE for 30 provinces in China over the span of 2000-2019.This study also analyzes cross-sectional dependence tests,panel unit root tests,Westerlund panel cointegration tests,Dumitrescu-Hurlin(D-H)causality tests.According to the test results,there is an inverted U-shaped association between EG and SE,and the assumption of the Environmental Kuznets Curve(EKC)is verified.The signs of EG and EC in the fixed effect(FE)and random effect(RE)methods are in line with those in the dynamic ordinary least squares(DOLS),fully modified ordinary least squares(FMOLS)and autoregressive distributed lag(ARDL)estimators.Moreover,the results verified that EC can obviously positive impact the SE.To reduce SE in China,government and policymakers can improve air quality by developing cleaner energy sources and improving energy efficiency.This requires the comprehensive use of policies,regulations,economic incentives,and public participation to promote sustainable development.

Joint Optimization of Energy Consumption and Network Latency in Blockchain-Enabled Fog Computing Networks

Fog computing is considered as a solution to accommodate the emergence of booming requirements from a large variety of resource-limited Internet of Things(IoT)devices.To ensure the security of private data,in this paper,we introduce a blockchain-enabled three-layer device-fog-cloud heterogeneous network.A reputation model is proposed to update the credibility of the fog nodes(FN),which is used to select blockchain nodes(BN)from FNs to participate in the consensus process.According to the Rivest-Shamir-Adleman(RSA)encryption algorithm applied to the blockchain system,FNs could verify the identity of the node through its public key to avoid malicious attacks.Additionally,to reduce the computation complexity of the consensus algorithms and the network overhead,we propose a dynamic offloading and resource allocation(DORA)algorithm and a reputation-based democratic byzantine fault tolerant(R-DBFT)algorithm to optimize the offloading decisions and decrease the number of BNs in the consensus algorithm while ensuring the network security.Simulation results demonstrate that the proposed algorithm could efficiently reduce the network overhead,and obtain a considerable performance improvement compared to the related algorithms in the previous literature.

NeTrainSim:a network-level simulator for modeling freight train longitudinal motion and energy consumption

Although train modeling research is vast, most available simulation tools are confined to city-or trip-scale analysis, primarily offering micro-level simulations of network segments. This paper addresses this void by developing the Ne Train Sim simulator for heavy long-haul freight trains on a network of multiple intersecting tracks. The main objective of this simulator is to enable a comprehensive analysis of energy consumption and the associated carbon footprint for the entire train system. Four case studies were conducted to demonstrate the simulator's performance. The first case study validates the model by comparing Ne Train Sim output to empirical trajectory data. The results demonstrate that the simulated trajectory is precise enough to estimate the train energy consumption and carbon dioxide emissions. The second application demonstrates the train-following model considering six trains following each other. The results showcase the model ability to maintain safefollowing distances between successive trains. The next study highlights the simulator's ability to resolve train conflicts for different scenarios. Finally, the suitability of the Ne Train Sim for modeling realistic railroad networks is verified through the modeling of the entire US network and comparing alternative powertrains on the fleet energy consumption.

A Two-Layer Active Power Optimization and Coordinated Control for Regional Power Grid Partitioning to Promote Distributed Renewable Energy Consumption

With the large-scale development and utilization of renewable energy,industrial flexible loads,as a kind of loadside resource with strong regulation ability,provide new opportunities for the research on renewable energy consumption problem in power systems.This paper proposes a two-layer active power optimization model based on industrial flexible loads for power grid partitioning,aiming at improving the line over-limit problem caused by renewable energy consumption in power grids with high proportion of renewable energy,and achieving the safe,stable and economical operation of power grids.Firstly,according to the evaluation index of renewable energy consumption characteristics of line active power,the power grid is divided into several partitions,and the interzone tie lines are taken as the optimization objects.Then,on the basis of partitioning,a two-layer active power optimization model considering the power constraints of industrial flexible loads is established.The upper-layer model optimizes the planned power of the inter-zone tie lines under the constraint of the minimum peak-valley difference within a day;the lower-layer model optimizes the regional source-load dispatching plan of each resource in each partition under the constraint of theminimumoperation cost of the partition,so as to reduce the line overlimit phenomenon caused by renewable energy consumption and save the electricity cost of industrial flexible loads.Finally,through simulation experiments,it is verified that the proposed model can effectively mobilize industrial flexible loads to participate in power grid operation and improve the economic stability of power grid.

Optimising Energy Consumption in SD-DCN Networks (Software Defined-Data Center Network)

Over the last decade, the rapid growth in traffic and the number of network devices has implicitly led to an increase in network energy consumption. In this context, a new paradigm has emerged, Software-Defined Networking (SDN), which is an emerging technique that separates the control plane and the data plane of the deployed network, enabling centralized control of the network, while offering flexibility in data center network management. Some research work is moving in the direction of optimizing the energy consumption of SD-DCN, but still does not guarantee good performance and quality of service for SDN networks. To solve this problem, we propose a new mathematical model based on the principle of combinatorial optimization to dynamically solve the problem of activating and deactivating switches and unused links that consume energy in SDN networks while guaranteeing quality of service (QoS) and ensuring load balancing in the network.

Analysis of Current Research and Future Development Trends of Applying Solar Energy in Street Lighting

In the context of promoting green energy transition and addressing climate change globally,solar energy,as a clean and renewable energy source,has gradually become a hot topic for research.Solar streetlight systems realize energy self-sufficiency and environment-friendly lighting by integrating photovoltaic power generation technology and efficient LED lighting technology.By comprehensively analyzing the current status of the application of solar streetlights at home and abroad,this paper discusses its technical advantages,market penetration,and challenges in its development.In terms of technical characteristics,this paper focuses on analyzing the key technologies such as energy conversion efficiency and intelligent control systems of solar streetlights.

Thermal comfort assessment and energy consumption analysis of ground-source heat pump system combined with radiant heating/cooling

A new ground source heat pump system combined with radiant heating/cooling is proposed, and the principles and the advantages of the system are analyzed. A demonstration of the system is applied to a rebuilt building： Xijindu exhibition hall, which is located in Zhenjiang city in China. Numerical studies on the thermal comfort and energy consumption of the system are carded out by using TRNSYS software. The results indicate that the system with the radiant floor method or the radiant ceiling method shows good thermal comfort without mechanical ventilation in winter. However, the system with either of the methods should add mechanical ventilation to ensure good comfort in summer. At the same level of thermal comfort, it can also be found that the annual energy consumption of the radiant ceiling system is less than that of the radiant floor system.

Characteristics of office lighting energy consumption and its impact on air conditioning energy consumption

The energy consumption of office buildings has increased sharply since the 21st century with the increasing ur-banization coverage.At this stage,the energy consumption of office buildings in China mainly comes from air conditioning and lighting.This paper obtains the regression equation of natural lighting illumination and radi-ant heat gain under different curtain conditions through experiments and simulations,and gives the theoretical calculation process of curtain regulation of office thermal and light environment and energy consumption.DeST and Ecotect software were used to analyze the thermal and light environment and energy consumption of the office.The results show that setting curtains in the room can effectively improve the indoor thermal light en-vironment,the higher the transmittance of curtains the lower the lighting energy consumption,the higher the number of high temperature hours of natural room temperature and the greater the radiant heat gain.The room with thick curtains has the lowest energy consumption for air conditioning in summer,followed by the room with thin curtains,and the room without curtains has the highest energy consumption for air conditioning.The room without curtains has the lowest energy consumption for artificial lighting,the room with thin curtains has the second lowest,and the room with thick curtains has the highest electricity consumption for artificial lighting.The air conditioning energy consumption accounts for the main building energy consumption,followed by the lighting energy consumption.After setting curtains in the office,the air conditioning energy consumption caused by the solar radiation heat entering the room through the exterior windows is smaller than the lighting energy consumption caused by artificial lighting.Therefore,the installation of internal shading with moderate trans-mittance and good thermal insulation performance can make the energy saving of lighting and air conditioning energy consumption reach the optimal value.

Analysis on Carbon Emissions from Energy Consumption in Agriculture and Reduction Measures in Guangdong Province

[Objective] The aim was to study CO2 emissions from energy consumption in agricultural production in Guangdong Province and put forward feasible reduction measures.[Method] Based on the data from China Energy Statistical Yearbook and Guangdong Statistical Yearbook,CO2 emissions from agricultural energy use in Guangdong Province from 2000 to 2009 was estimated by using the formula of carbon emissions recommended by Intergovernmental Panel on Climate Change (IPCC),and corresponding reduction measures were put forward.[Result] With the rapid increase of agricultural output and energy consumption,CO2 emissions from energy consumption in agricultural production in Guangdong Province showed increasing trend from 2000 to 2009,that is to say,increasing from 423.63×104 t C million tons in 2000 to 605.99×104 t C in 2009,with annual growth rate of 4.1%.Meanwhile,carbon emissions intensity during energy consumption in agriculture went down in recent ten years,in other words,decreasing from 0.424 t C/×104 yuan in 2000 to 0.301 t C/×104 yuan in 2009,and its annual decreasing rate was 3.7%.The variation of CO2 emissions from energy consumption in agriculture mainly resulted from the increase of agricultural output,improvement of energy utilization efficiency,high carbonization in agricultural energy consumption structure and so forth.Therefore,in order to reduce CO2 emissions from energy consumption in agriculture,it is necessary to vigorously develop rural renewable energy,develop and popularize advanced technology for energy utilization,advance the energy conservation of agricultural machines,establish and improve the macroeconomic control mechanism for carbon emissions from the energy consumption in agricultural production in the further.[Conclusion] The study could provide references for the establishment of policy about reducing carbon emissions from agricultural energy consumption in Guangdong Province.

Parameters Optimization and Energy-Saving of Highway Tunnel Backlighting with LED

In order to acquire the most energy-saving luminairedistribution-parameters(LDPs)of highway tunnel interior zone backlighting,the parameters optimization model(POM)of backlighting for tunnel interior zone was established.Yanlieshan tunnel of Jiujing highway was taken as an example for the optimization.The optimal LDPs of the backlighting system of the tunnel interior zone were obtained by the POM,a comparison between the optimization results and those of Yanlieshan tunnel’s actual lighting system was performed,which showed that the optimized backlighting system with LED lamps installed according to the optimized LDPs could save energy remarkablely even under full capacity lighting condition.Illuminance and illuminance uniformity of the tunnel road surface still met the lighting demands even the LED lamp’s luminance decreased by 30%.A backlighting simulation experiment with the optimized backlighting LDPs for Yanlieshan tunnel was accomplished in the software Dialux.The simulation results basically agreed with the optimization calculated results from the POM which proved the correctness of the backlighting POM.

Comparison of Energy Consumption of the 12 Classroom Typical School Buildings in Selected 4 City in Turkey

School is a special place where students come together to become productive individuals of society,acquire basic skills and acquire citizenship knowledge.With the introduction of the new education system(4+4+4)in Turkey in 2012-2013,some difficulties occurred in the spatial structure of the schools.After the new system,increasing number of students and decreasing student requirements have been tried to be solved with temporary solutions.At the same time that millions of students studying in primary schools all over Turkey have the same architectural feature as one type of architectural school project,regardless of the geographical and social situation began to be implemented in all parts of the city.Therefore,the increase in consumption varies depending on the geographical reasons where the type projects are implemented.Selected regions of the four thermal zones in Turkey for this research are provided below:1^st Thermal district in Antalya;2^nd Thermal district in Bursa;3^rd Thermal district in Elaz??;4^th Thermal district in Kars.The calculation of the energy consumption created by the above cities by means of BEP-TR program and comparing classes.

Energy-efficient Approach to Minimizing the Energy Consumption in An Extended Job-shop Scheduling Problem

The traditional production planning and scheduling problems consider performance indicators like time, cost and quality as optimization objectives in manufacturing processes. However, environmentally-friendly factors like energy consumption of production have not been completely taken into consideration. Against this background, this paper addresses an approach to modify a given schedule generated by a production plarming and scheduling system in a job shop floor, where machine tools can work at different cutting speeds. It can adjust the cutting speeds of the operations while keeping the original assignment and processing sequence of operations of each job fixed in order to obtain energy savings. First, the proposed approach, based on a mixed integer programming mathematical model, changes the total idle time of the given schedule to minimize energy consumption in the job shop floor while accepting the optimal solution of the scheduling objective, makespan. Then, a genetic-simulated annealing algorithm is used to explore the optimal solution due to the fact that the problem is strongly NP-hard. Finally, the effectiveness of the approach is performed small- and large-size instances, respectively. The experimental results show that the approach can save 5%-10% of the average energy consumption while accepting the optimal solution of the makespan in small-size instances. In addition, the average maximum energy saving ratio can reach to 13%. And it can save approximately 1%-4% of the average energy consumption and approximately 2.4% of the average maximum energy while accepting the near-optimal solution of the makespan in large-size instances. The proposed research provides an interesting point to explore an energy-aware schedule optimization for a traditional production planning and scheduling problem.

A review of China's energy consumption structure and outlook based on a long-range energy alternatives modeling tool

China＇s energy consumption experienced rapid growth over the past three decades, raising great concerns for the future adjustment of China＇s energy consumption structure. This paper first presents the historical evidence on China＇s energy consumption by the fuel types and sectors. Then, by establishing a bottom-up accounting framework and using long-range energy alternatives plan- ning energy modeling tool, the future of China＇s energy consumption structure under three scenarios is forecast. According to the estimates, China＇s total energy con- sumption will increase from 3014 million tonnes oil equivalent （Mtoe） in 2015 to 4470 Mtoe in 2040 under the current policies scenario, 4040 Mtoe in 2040 under the moderate policies scenario and 3320 Mtoe in 2040 under the strong policies scenario, respectively, lower than those of the IEA＇s estimations. In addition, the clean fuels （gas, nuclear and renewables） could be an effective alternative to the conventional fossil fuels （coal and oil） and offer much more potential. Furthermore, the industry sector has much strong reduction potentials than the other sectors. Finally, this paper suggests that the Chinese government should incorporate consideration of adjustment of the energy consumption structure into existing energy policies and measures in the future.

Calculating Method for Influence of Material Flow on Energy Consumption in Steel Manufacturing Process

From the viewpoint of systems energy conservation, the influences of material flow on its energy consumption in a steel manufacturing process is an important subject. The quantitative analysis of the relationship between material flow and the energy intensity is useful to save energy in steel industry. Based on the concept of standard material flow diagram, all possible situations of ferric material flow in steel manufacturing process are analyzed. The expressions of the influence of material flow deviated from standard material flow diagram on energy consumption are put forward.

The relationship between energy consumption and economic growth and the development strategy of a low-carbon economy in Kazakhstan

Fossil energy is the material basis of human survival, economic development and social progress. The relationship between energy consumption and economic growth is becoming increasingly close. However, energy consumption is the major source of greenhouse gases, which can significantly affect the balance of the global ecosystem. It has become the common goal of countries worldwide to address climate change, reduce carbon dioxide emissions, and implement sustainable development strategies. In this study, we applied an approximate relationship analysis, a decoupling relationship analysis, and a trend analysis to explore the relationship between energy consumption and economic growth using data from Kazakhstan for the period of 1993-2010. The results demonstrated： （1） the total energy consumption and GDP in Kazakhstan showed a ＂U＂-type curve from 1993 to 2010. This curve was observed because 1993-1999 was a period during which Kazakhstan transitioned from a republic to an independent country and experienced a difficult transition from a planned to a market economy. Then, the economic system became more stable and the industrial production increased rapidly because of the effective financial, monetary and industrial policy support from 2000 to 2010. （2） The relationships between energy con- sumption and carbon emissions, economic growth and energy exports were linked; the carbon emissions were mainly derived from energy consumption, and the dependence of economic growth on energy exports gradually increased from 1993 to 2010. Before 2000, the relationship between energy consumption and economic growth was in a recessional decoupling state because of the economic recession. After 2000, this relationship was in strong and weak decoupling states because the international crude oil prices rose and energy exports increased greatly year by year. （3） It is forecasted that Kazakhstan cannot achieve its goal of energy consumption by 2020. Therefore, a low-carbon economy is the best strategic choice to address climate change from a global perspective in Kazakhstan. Thus, we proposed strategies including the improvement of the energy consumption structure, the development of new energy and renewable energy, the use of cleaner production technologies, the adjustment and optimization of the industrial structure, and the expansion of forest areas.

Comprehensive optimized GM(1,1) model and application for short term forecasting of Chinese energy consumption and production

In order to improve prediction accuracy of the grey prediction model and forecast China energy consumption and production in a short term, this paper proposes a novel com- prehensively optimized GM（1,1） model, also named COGM（1,1）, based on the grey modeling mechanism. First, the relationship of the background value formula and its whitenization equation is analyzed and a new method optimizing background values is proposed to eliminate systemic errors in the modeling process. Second, the solving process of the new model is derived. For parameter estimation, a set of auxiliary parameters are used to change grey equation＇s form. Then, original parameters are re- stored by an equations system. After solving the whitenization equation, initial value in time response function is established by least errors criteria. Finally, a numerical case and comparison with other grey prediction models are made to testify the new model＇s effectiveness, and the computational results show that the COGM（1,1） model has a better property and achieves higher precision. The new model is used to forecast China energy con- sumption and production, and the ability of energy self-sufficiency is further analyzed. Results indicate that gaps between consump- tion and production in future are predicted to decline.

Changing Energy Consumption Behaviour: Individuals' Responsibility and Government Role

Renewable energy is clearly a very important topic nowadays. The risk and the damage that could be caused by conventional energy resources cannot be hidden. There is an enormous need that people start formulating a better attitude towards renewable energy and change their consumption behaviour. Otherwise, the future of environment and the coming generations is defiantly not going to be promising. This paper will discuss the importance of sustainable energy and how the energy related behaviour is created. It will present a framework to influence the current behaviour and push it to be more green oriented. It is also important to know till what limit are governments responsible in this change, and what are the tools that they have to push towards green direction.

Energy consumption in rock fragmentation at intermediate strain rate

In order to determine the relationship among energy consumption of rock and its fragmentation, dynamic strength and strain rate, granite, sandstone and limestone specimens were chosen and tested on large-diameter split Hopkinson pressure bar (SHPB) equipment with half-sine waveform loading at the strain rates ranging from 40 to 150 s- 1. With recorded signals, the energy consumption, strain rate and dynamic strength were analyzed. And the fragmentation behaviors of specimens were investigated. The experimental results show that the energy consumption density of rock increases linearly with the total incident energy. The energy consumption density is of an exponent relationship with the average size of rock fragments. The higher the energy consumption density, the more serious the fragmentation, and the better the gradation of fragments. The energy consumption density takes a good logarithm relationship with the dynamic strength of rock. The dynamic strength of rock increases with the increase of strain rate, indicating higher strain rate sensitivity.