Controlled-release Properties of Microencapsulated Disperse Dyes

Some disperse dyes were microencapsulated by means of in- situ polymerization. These microencapsulated disperse dyes was extracted respectively by ethanol under certain conditions. The controlled-release properties of disperse dyes through the shell of microcapsules were measured by spectrophotometer. According to the results, it was drawn that the type of disperse dyes, the auxiliaries contained in disperse dyes, the quantity of system controlling medium used and the core/shell ratio of microcapsules play important roles in controlling the release properties of microcapsules. The different controlled- release properties of microcapsules, which were prepared under given conditions, however, would in turn influence the performance of microcapsules in multiple-transfer printing.

One-bath Dyeing of Polyester/Wool Blend with Disperse Dyes

The role of auxiliary LAB as vehicle in dyeing polyester/wool blends with disperse dyes is described. Dye exhaustion and bonding on polyester/wool samples are studied under different experimental conditions - the LAB amount, the temperature and pH value- to achieve optimum conditions. The results are compared with those obtained with and without conventional dyeing auxiliary products. Although dye exhaustion is higher in the presence of commercial carriers, the dye bonded increases markedly in the presence of auxiliary LAB in both fibers. The role played by auxiliary LAB in polyester/wool blend dyeing can provide a new method for this process.

Synthesis and Characterization of a Novel Aqueous Dispersion Poly[urethane-(disperse blue 14)-urethane] Dye

A novel polymeric dye of aqueous dispersion poly[urethane-(disperse blue 14)-urethane] was synthesized based on poly(propylene glycol) (PPG), 2, 4-tolylene diisocyanate (TDI), klimethylol propionic acid (DMPA), disperse blue 14 and triethylamine (TEA) depending on a modified acetone process. Fourier transform infrared spectroscopy (FTIR) was used to identify Lhe structure of the polymeric dye, indicating an obvious carbonyl stretching absorption in disperse blue 14. The polymer was also characterized by the analysis of DSC, TGA, WAXD and UV-Vis spectroscopy.

Synthesis of Some New Diazo Disperse Dyes and Their Application on Dyeing of Polyester

The synthesis of some new diazo disperse dyes containing a pyrazol-5-one was described. The structures of the new products have been deduced from elemental analysis and spectral dada such as UV-Vis absorption, IR, ^1H NMR, and MS spectroscopy. These dyestuffs gave satisfactory results when applied as disperse dyes to polyester fabric. The dyeing properties such as light fasmess, washing fastness and exhaustion studies have been investigated.

Preparation of Alizarin Dye Dispersion Solution and Dyeing of Cotton Fabric

Alizarin,extracted from rubia cordifolia,is a green natural dye.However,its application has been limited by its poor water solubility and pH sensitivity.In this study,linear sulfonic anionic surfactant(LAS)had been studied as a new dispersant,which promoted the dyeing of alizarin on fabrics under mild conditions.Ultraviolet visible(UV-vis)spectra and Fourier transform infrared(FTIR)spectra confirmed appropriate bonding between alizarin and LAS,and the nano particle size analysis showed that LAS could promote the dispersion of alizarin in aqueous solution.Under the optimized condition of alizarin 4.8%on mass of fabric(omf)and LAS solution 2×10^(-2)mol/L,the fabrics were dyed with alizarin at room temperature and pH neutral conditions.The dyed fabrics had good washing fastness and ironing fastness.

Effect of Ecotype Carrier for Disperse Dye on Dyeing of Polyester Microfiber

The effect of "Eco" carrier SML for disperse dye on dyeing of polyester microfiber was studied. With respect of the result of effects of SML on dyeing rate curve, dye build - up, migration of dyed polyester microfiber and K/S, color property, color fastness of dyed polyester microfiber fabrics, SML has a significant application perspective, deserving practical uses.

New Technology of Disperse Dyes Solubilized by Auxiliaries Dyeing to Wool

The new technology of disperse dyes solubilized by auxil-iary dycing to wool is put forward creatively.On the ef-fect of agent HM made by ourselves,the wool can bedyed by disperse dyes.The effects of temperature,pHvalue,liquor ratio,electrolyte and concentration ofHM,on the percentage of exhaustion,dyeing rate andpermeability,levelness are researched.This technologyhas many advantages,e.g.superior levelness and wet-fastness,saving dyes,simple process and bright shadeetc.,this project has utmost values of theory researchand practice application.

Mathematical Index for Evaluating Disperse Dyes Levelness of Superfine Polyester Fabric

The dyeing deference between the superfine and the con-ventional polyester fabric is discussed. The major threefactors affecting the level dyeing property of superfinepolyester-initial adsorption rate, desorption rate andinterface migration rate of dyestuffs at 70℃ are studied.The levelness improves considerably with decreased ini-tial adsorption rate, increased desorption rate and inter-face migration rate. And then a mathematical indexbased on them is established. The evaluation to dispersedyes resulting from it corresponds with their perfor-mance during industrial process. As new definitions, ini-tial adsorption rate and desorption rate of dyestuffs arefirstly introduced.

AN EXAMINATION OF THE INFLUENCE OF STABILIZERS ON THE PHOTOCHEMICAL STABILITY OF DISPERSE DYES

There is a powerful market-need for superfast disperse dyes in special use, e.g. for automotivefabrics. The photochemical fading reactions of dyes are often very complicated, and no singlphotodegradation pathway can be involved for all kinds of dyes. To enhance the photostability of the commonly used disperse dyes, a series of tests on the ef-fect of variable stabilizers on the photodegradation rate of nine representative disperse dyes werecarried out both in ethyl acetate solution and on cellulose acetate film. A moderate light sourceemitting above 300 nm was adopted in this study to simulate the photofading under practical appli-cations. The results show that, in solution, 2,2,6,6-tetramethyl-piperidine is the most effectivegeneral stabilizer for all the tested dyes, but on cellulose film, nickel diethyl-dithiocarbamateshows the greatest general protecting effect, and a synergistic effect is observed for special combina-tions of stabilizers.

Syntheses and Properties Studies on New Dispersed Dyes With Intermediate BIT

The target production were obtained by coupled reaction of 3-amino-5-nitro-2, 1- benzoisothiazole,as a diazo component,with some derivatives of anilline or some derivatives of naphthylamine sulfonic acid in proper condition. Their colors are from red to violet. They have excellent tight property. The chemical and physical test of production verified that they were some unique properties.

New Disperse Dyes for Polyester Microfibres

A series of disperse dyes bearing ether groups have been synthesized. The visible absorption spectra of them were studied, their fastness on polyester microfibres were investigated.

Preparation and Application of Microencapsulated Disperse Dyes

Microcapsules containing disperse dyes were prepared by means of in-situ polymerization. Polyester fabrics were multiple-transfer printed and color-mix printed using those microencapsulated dyes under different process conditions. By color measurement instrument, it can be seen that the times of multiple-transfer printing are up to ten while under appropriate conditions, especially when the transfer printing time is 50 seconds and the transfer printing temperature is 180°C. On the other hand, the K/S value of each transfer printing can keep almost constant. Meanwhile, the visual effect of color- mix printing with microencapsulated disperse dyes is special in the varicolored exhibiting if compared with conventional disperse dyes.

Kinetics of Hydrolysis of Cationic Reactive Disperse Dyes Containing Quaternary Group

The kinetics of hydrolysis of cationic reactive disperse dyes containing quaternary group and chemical shift（13CNMR） of the adjacent carbon atoms with pyridine-acetylamino were discussed. The results show pyridine-acetylamino reactive group had higher reactivity than chloroacetylamino and chemical shift（13 CNMR） of the adjacent carbon atoms with pyridine-acetylamino moved 18.77 ppm.

Decolorization of Disperse Dyes Using Immobilized Laccase Enzyme on Nano Zinc Ferrite from Single and Binary Systems

In this paper, immobilized laccase enzyme on nano zinc ferrite was used in order to decolorize disperse dyes from single and binary systems. In this case, disperse dyes such as Disperse red 60 (DR60), Disperse blue 56 (DB56) and Disperse yellow 54 (DY54) were selected as model dyes. Several parameters such as enzyme concentration, pH and dye concentration and their effect on decolorization of dyes from single and binary systems were studied. According to the experimental results, the optimized immobilized laccase enzyme concentration, reaction time and pH for decolorization of DR60, DB56 and DY54 from single and binary systems were 500 mg/L (for DR60 and DY54) and 400 mg/L (for DB56), 20 min and 3, respectively. Moreover, Dye decolorization kinetics followed Michaelis-Menten Model. Finally, the results showed that enzymatic process using immobilized laccase enzyme on nano zinc ferrite was effective method to decolorize disperse dyes from single and binary systems.

WATER SOLUBLE DISPERSE DYES CONTAINING CARBOXY-METHYL-SULFONYL GROUP

Water soluble disperse dyes of either monoazo or anthraquinone types containing the carboxymethylsulfonylgroup（-SO2CH2COOH）were synthesized.Ammonium salts of this type of dyes are more soluble thanother salts.These dyes are suitable for pad dyeing or printing on polyester fiber and polyester/cottonblends in either weak acid,neutral or weak alkali medium without a dispersing agent.The formation of-SO2CH3 group from -SO2CH2COOH group after fixing on the fiber was proved.

Dyeing PET Textile with C.I.Disperse Red 60 and C.I. Disperse Orange 25 in Supercritical CO_2

For a better understanding of the feasibility of supercritieal fluid dyeing （SFD） and more available information for the process development, the experiments of dyeing PET textile with C.I. disperse red 60 （anthraquinone type） and C. I. disperse orange 25 （azo type） in supercritieal CO2 were carried out with a high-pressure dyeing apparatus at temperatures from 80 to 130℃ and pressure up to 31 MPa. The effect of operating conditions on color yield （K/S） was investigated in SFD experiment, and the optimum operating conditions for the above two disperse dyes were obtained as follows： the temperature 120℃, the pressure 25 MPa and the dyeing time 100 min. As compared with SFD, the conventional water dyeing （CWD） was carried out with the same dyes and textile. The results show that the better fastness, levelness and apparent color can be achieved in SFD and the SFD process has many significant advantages over the CWD process.

Adsorption Mechanism of Disperse Dye on Elastic Polyurethane Fibre

In this paper, the adsorption isotherms of two disperse dyes, C.I. Disperse Red 60 and C.I. Disperse orange 76, on two kinds of PU fibers at 90℃ were measured respectively. It was found that these adsorption isotherms followed a dual model, Nernst and Langmuir. Based on the parameters obtained in studying, the relationship between the chemical structure of dyes and their adsorption behaviors was arialyzed. Through the measurement of washing fastness of dyed sample with two dye concentrations, 1% （o.w. f） and 3% （o. w. f）, it was found that the pale shade dyeing possessed better wet-fastness than the dark. This phenomenon confirmed further that the disperse dyes were sorbed on the PU fiber by langmuir sorption and the partition mechanism.

Synthesis of Some Azo Disperse Dyes from 1-Substituted 2-Hydroxy-6-pyridone Derivatives and Their Colour Assessment on Polyester Fabric

The synthesis of a series of 3-(p-substituted phenylazo)-6-pyridone dyes which is suitable for the dyeing of polyester fabrics, is described. Visible absorption spectra of the dyes were examined in various solvents and the compounds in solution exhibited hydrazone-common anion equilibrium. The electronic absorption spectra cover a λmax range of 404 - 464 nm in DMF at uniformly high absorption intensity between 5.33 × 104 - 8.55 × 104 lmol–1cm–1 and gave bright intense hues of yellow to orange on polyester fabrics. The colour parameters of the dyed fabrics were measured and the dyes have excellent exhaustion between 72% - 79% for polyester fabrics, more intense and of very good fastness properties on polyester fabrics. The remarkable degree of levelness and brightness after washing is indicative of good penetration and excellent affinity of these dyes for the polyester fabric.

Green Light-Emitting Organic Electroluminescent Device with a New Fluorescent Dye Dispersed in Poly(N-vinylcarbazole) Emitter Layer

Double-layer organic electroluminescent devices have been constructed. A new fluorescent dye, 9,10-bis(phenylethynyl)anthracence, was chosen as the dopant which was molecularly dispersed in the polymer film, and green light was observed from the device with luminance of 130cd/m(2) at 17V.

The Relationship between Polarographic Reduction Potentials and Discharge Properties of Disperse Dyes

The half-wave potentials of disperse dyes with different structures are measured, the relationship between half-wave potentials and their discharge properties is discussed, then their effect factors are studied, such as the chemical structure types and substituents of disperse dyes and technological parameters. The results indicate that the half-wave potentials of disperse dyes when reduced could be used to characterize their reducing and discharge properties.