This paper devoted to finding processing methods of alkaline hydrolysate produced from rice husk pre-extraction, and discusses alkaline hydrolysate processing schemed and disengagement of some products： amorphous sil...This paper devoted to finding processing methods of alkaline hydrolysate produced from rice husk pre-extraction, and discusses alkaline hydrolysate processing schemed and disengagement of some products： amorphous silica of various quality, alkaline lignin, and water and alkaline extraction polysaccharides. Silica samples were characterized： crude （air-dried）, burnt （no preliminary water treatment）, washed in distilled water, and washed in distilled water and burnt. Waste water parameters upon the extraction of solids from alkaline hydrolysate dropped a few dozens or thousand times depending on the applied processing method. Color decreased a few thousand times, turbidity was virtually eliminated, chemical oxygen demanded about 20–136 times; polyphenols content might decrease 50% or be virtually eliminated. The most prospective scheme obtained the two following solid products from rice husk alkaline hydrolysate： amorphous silica and alkaline extraction polysaccharide. Chemical oxygen demand of the remaining waste water decreased about 140 times compared to the silica-free solution.展开更多
In the process of synthesis of nanometer SiC precursors with sol-gel of SiO2 and lignin , the products of all sizes required can be controlled by the concentration of reac-t ants , pH, temperature, reaction and ageing...In the process of synthesis of nanometer SiC precursors with sol-gel of SiO2 and lignin , the products of all sizes required can be controlled by the concentration of reac-t ants , pH, temperature, reaction and ageing time , and so on . The best conditions in this research are : the concentration of Na2SiO3 and organic matters are 4. 50% and 26.4% respectively, pH = 3.3 , T = 65℃ , ageing time is 30min , dried at 150 ℃ , the size of SiC precursors is about 2.0μm .展开更多
Research is devoted to the problem of recycling waste of the Baikal Pulp and Paper Mill, whose activity has caused serious damage to the ecological environment of Lake Baikal and its environs. Grouting waste productio...Research is devoted to the problem of recycling waste of the Baikal Pulp and Paper Mill, whose activity has caused serious damage to the ecological environment of Lake Baikal and its environs. Grouting waste production is currently the most effective possible decision to the problem of pollutants, such as sludge-lignin and ash, in water objects and groundwater. The results on the grouting of liquid and solid waste from the Baikal Pulp and Paper Mill, represented by sludge lignin and ash, are presented. Cement, liquid glass, colloidal silica, ammonium persulfate, hydrogen peroxide were used as the main hardeners. Samples were formed by mixing the original waste with astringent. The strength in time, shrinkage, resistance to water were studied. Samples formed on the basis of colloidal silica solution have a maximum uniaxial compressive strength of 0.4 - 0.5 MPa, on the basis of liquid glass—0.2 - 0.3 MPa. Adding fine sand increases the strength by 1.5 - 1.7 times. Samples based on ammonium persulfate and hydrogen peroxide do not have sufficient strength. Adding fine quartz sand increases the strength up to 1.0 - 1.2 MPa.展开更多
文摘This paper devoted to finding processing methods of alkaline hydrolysate produced from rice husk pre-extraction, and discusses alkaline hydrolysate processing schemed and disengagement of some products： amorphous silica of various quality, alkaline lignin, and water and alkaline extraction polysaccharides. Silica samples were characterized： crude （air-dried）, burnt （no preliminary water treatment）, washed in distilled water, and washed in distilled water and burnt. Waste water parameters upon the extraction of solids from alkaline hydrolysate dropped a few dozens or thousand times depending on the applied processing method. Color decreased a few thousand times, turbidity was virtually eliminated, chemical oxygen demanded about 20–136 times; polyphenols content might decrease 50% or be virtually eliminated. The most prospective scheme obtained the two following solid products from rice husk alkaline hydrolysate： amorphous silica and alkaline extraction polysaccharide. Chemical oxygen demand of the remaining waste water decreased about 140 times compared to the silica-free solution.
文摘In the process of synthesis of nanometer SiC precursors with sol-gel of SiO2 and lignin , the products of all sizes required can be controlled by the concentration of reac-t ants , pH, temperature, reaction and ageing time , and so on . The best conditions in this research are : the concentration of Na2SiO3 and organic matters are 4. 50% and 26.4% respectively, pH = 3.3 , T = 65℃ , ageing time is 30min , dried at 150 ℃ , the size of SiC precursors is about 2.0μm .
文摘Research is devoted to the problem of recycling waste of the Baikal Pulp and Paper Mill, whose activity has caused serious damage to the ecological environment of Lake Baikal and its environs. Grouting waste production is currently the most effective possible decision to the problem of pollutants, such as sludge-lignin and ash, in water objects and groundwater. The results on the grouting of liquid and solid waste from the Baikal Pulp and Paper Mill, represented by sludge lignin and ash, are presented. Cement, liquid glass, colloidal silica, ammonium persulfate, hydrogen peroxide were used as the main hardeners. Samples were formed by mixing the original waste with astringent. The strength in time, shrinkage, resistance to water were studied. Samples formed on the basis of colloidal silica solution have a maximum uniaxial compressive strength of 0.4 - 0.5 MPa, on the basis of liquid glass—0.2 - 0.3 MPa. Adding fine sand increases the strength by 1.5 - 1.7 times. Samples based on ammonium persulfate and hydrogen peroxide do not have sufficient strength. Adding fine quartz sand increases the strength up to 1.0 - 1.2 MPa.
