The machine learning models of multiple linear regression(MLR),support vector regression(SVR),and extreme learning ma-chine(ELM)and the proposed ELM models of online sequential ELM(OS-ELM)and OS-ELM with forgetting me...The machine learning models of multiple linear regression(MLR),support vector regression(SVR),and extreme learning ma-chine(ELM)and the proposed ELM models of online sequential ELM(OS-ELM)and OS-ELM with forgetting mechanism(FOS-ELM)are applied in the prediction of the lime utilization ratio of dephosphorization in the basic oxygen furnace steelmaking process.The ELM model exhibites the best performance compared with the models of MLR and SVR.OS-ELM and FOS-ELM are applied for sequential learning and model updating.The optimal number of samples in validity term of the FOS-ELM model is determined to be 1500,with the smallest population mean absolute relative error(MARE)value of 0.058226 for the population.The variable importance analysis reveals lime weight,initial P content,and hot metal weight as the most important variables for the lime utilization ratio.The lime utilization ratio increases with the decrease in lime weight and the increases in the initial P content and hot metal weight.A prediction system based on FOS-ELM is applied in actual industrial production for one month.The hit ratios of the predicted lime utilization ratio in the error ranges of±1%,±3%,and±5%are 61.16%,90.63%,and 94.11%,respectively.The coefficient of determination,MARE,and root mean square error are 0.8670,0.06823,and 1.4265,respectively.The system exhibits desirable performance for applications in actual industrial pro-duction.展开更多
Recycling of industrial waste is one of the effective ways to overcome their disposal problem. Ash produced by thermal power plants and lime sludge produced by paper mills require huge disposal land and may create env...Recycling of industrial waste is one of the effective ways to overcome their disposal problem. Ash produced by thermal power plants and lime sludge produced by paper mills require huge disposal land and may create environmental problems such as dusting and leaching of harmful heavy metals. Stabilization of the ash can improve its engineering properties and address the environmental problems. This paper reports the laboratory test results of a Class F pond ash stabilized with lime(2%, 4%, 6% and 8% by weight)alone and in combination with lime sludge(5%, 10% and 15% by weight). The X-ray diffraction(XRD) and scanning electron micrograph(SEM) tests were also performed to identify the possible formation of crystalline phases after stabilization. The effects of lime sludge on the unsoaked and soaked bearing ratios of pond ash with different lime contents, after 7 d, 28 d and 45 d of curing, were observed. Test results indicated that the bearing ratio increased considerably up to a 4% lime content which can be taken as the optimum lime content. Further increase in lime content increased bearing ratio gradually but at a slower rate. The effect of lime sludge was more pronounced at the optimum lime content,particularly at a low curing period. Lime sludge improved the bearing ratio in soaked condition significantly. Leachate analysis of stabilized ash was performed using toxicity characteristic leaching procedure(TCLP-1311) method. The concentrations of toxic elements Zn, Cu, Cd, Ni and Cr in the stabilized mixes were lower than those in the unstabilized waste. The results indicated that the pond ash-lime-lime sludge mixes have potential application as road subbase material.展开更多
The present study is inscribed within the framework of the amelioration of the soils of the Santchou plain for employment as pavement subgrade. The bearing capacity proposed by these soils at their respective optimum ...The present study is inscribed within the framework of the amelioration of the soils of the Santchou plain for employment as pavement subgrade. The bearing capacity proposed by these soils at their respective optimum dry densities is relatively small, although most of these experimental California Bearing Ratio (CBR) values of the studied soils are more important than the ones prescribed by the American Association of State Highway and Transportation Officials Classification system (AASHTO) for A5, A6, and A7 types. The stabilization of this soils with lime has been chosen to improve the bearing capacity and by association, their resilient modulus. The results of this study show that the increase of lime content is not proportional with the increase of the expected mechanical performances. In fact, the literature explains that when the lime content arrives at an optimum, the mechanical parameters no longer increase, but decrease significantly. After this optimum, the soil stabilization no longer shows advantages in the increase of geo-mechanical properties of soils.展开更多
A new electric arc furnace (EAF) steelmaking process with increasing hot metal charging ratio and improving slagging regime simultaneously was developed and applied in a 50 t electric arc furnace for more than a yea...A new electric arc furnace (EAF) steelmaking process with increasing hot metal charging ratio and improving slagging regime simultaneously was developed and applied in a 50 t electric arc furnace for more than a year at No. 1 Steelmaking Plant of Shanxi Taigang Stainless Corporation Limited. The essential fact of the new EAF steelmaking process was to charge hot metal in two portions or steps: firstly, 35wt%-40wt% hot metal was pretreated by blowing oxygen in a specially designed reactor for decar burization and improving hot metal temperature and melting premelted slag; secondly, 30wt% hot metal was charged into EAF with high basicity refining slags from ladle furnace (LF)-vacuum degassing furnace (VD) refining process. The results show that the hot metal charging ratio can reach to about 65wt%-70wt% for the new EAF steelrnaking process; meanwhile, the tap-to-tap time of a 50 t EAF can shorten by 5-10 min, the electricity consumption can decrease by 35-50 kW·h/t, the lime consumption can reduce by 10.5 kg/t of molten steel, and the content of harmful heavy metals in molten steel can be easily controlled to less than the upper limits of aimed steel specification or grade compared with the traditional EAF steelmaking process. In addition, the dephosphorization ability shows a slight strengthening, however, a small degree of lessening for desulphurization ability is observed for the new EAF steelmaking process, but the weakness of desulphurization ability cannot become an obstacle to its further application since a stronger desulphurization ability can be achieved during secondary refining of LF coupled with VD after EAF steelmaking process.展开更多
In the present study,unconfined compressive strength(qu)values of two lime-treated soils(soil 1 and 2)with curing times of 28 d,90 d and 360 d were optimized.The influence of void/lime ratio was represented by the por...In the present study,unconfined compressive strength(qu)values of two lime-treated soils(soil 1 and 2)with curing times of 28 d,90 d and 360 d were optimized.The influence of void/lime ratio was represented by the porosity/volumetric lime content ratio(η/Liv)as the main parameter.η/Liv represents the volume of void influenced by compaction effort and lime volume.The evolution of qu was analyzed for each soil using the coefficient of determination as the optimization parameter.Aiming at providing adjustments to the mechanical resistance values,the η/Liv parameter was modified to η/LivC using the adjustment exponent C(to make qu-η/Liv variation rates compatible).The results show that with the decrease of η/LivC.qu increases potentially and the optimized values of C were 0.14-0.18.The mechanical resistance data show similar trends between qu and η/LivC for the studied silty soil-ground lime mixtures,which were cured at ambient temperature(23±2)℃ with different curing times of 28-360 d.Finally,optimized equations were presented using the normalized strengths and the proposed optimization model,which show 6% error and 95% acceptability on average.展开更多
Through laboratory test, the relationships among change of compactibility, liquid/plastic limit, free swell, swell ratio without load, california bearing ratio (CBR) and soakage (after being soaked in water), and mix-...Through laboratory test, the relationships among change of compactibility, liquid/plastic limit, free swell, swell ratio without load, california bearing ratio (CBR) and soakage (after being soaked in water), and mix-ratio of quick lime and time were studied. The results show that optimum water content, plastic limit and CBR of high liquid limit clay improved by quick lime increase with the increase of mix-ratio of quick lime, while the maximum dry density, liquid limit, plasticity index, soakage (after being immersed in water), free swell, and swell ratio without load decrease with the increase of mix-ratio of quick lime. Plastic limit of high liquid clay improved by quick lime gradually increases with time, while the liquid limit, plasticity index, free swell and swell ratio without load gradually decrease with time. When the mix-ratio of quick lime exceeds 2%, after 14 d, swell ratio without load of the improved clay is zero, its free swell is about 30% of that of untreated soil, and its plasticity index is less than 26 for sub-grade material, satisfying the requirement by 'Specifications for Design of Highway Subgrade'.展开更多
A series of triaxial compression tests were arried out by means of composite-reinforced soil samples to simulate the interaction between soil and pile. The samples are made of gravel or lime-soil with different length...A series of triaxial compression tests were arried out by means of composite-reinforced soil samples to simulate the interaction between soil and pile. The samples are made of gravel or lime-soil with different length at the center. The experiment indicates that the strength of the composite samples can not be obtained by superimposure of reinforcing pile and soil simply according to their replacement proportion. It also indicates the law for stress ratio of reinforcing column to soil. The stress ratio of reinforcing column to soil increases and reaches peak rapidly while load and strain is small. Then the ratio decreases. This law is in accordance with the measuring resuits in construction site.展开更多
基金supported by the National Natural Science Foundation of China (No.U1960202).
文摘The machine learning models of multiple linear regression(MLR),support vector regression(SVR),and extreme learning ma-chine(ELM)and the proposed ELM models of online sequential ELM(OS-ELM)and OS-ELM with forgetting mechanism(FOS-ELM)are applied in the prediction of the lime utilization ratio of dephosphorization in the basic oxygen furnace steelmaking process.The ELM model exhibites the best performance compared with the models of MLR and SVR.OS-ELM and FOS-ELM are applied for sequential learning and model updating.The optimal number of samples in validity term of the FOS-ELM model is determined to be 1500,with the smallest population mean absolute relative error(MARE)value of 0.058226 for the population.The variable importance analysis reveals lime weight,initial P content,and hot metal weight as the most important variables for the lime utilization ratio.The lime utilization ratio increases with the decrease in lime weight and the increases in the initial P content and hot metal weight.A prediction system based on FOS-ELM is applied in actual industrial production for one month.The hit ratios of the predicted lime utilization ratio in the error ranges of±1%,±3%,and±5%are 61.16%,90.63%,and 94.11%,respectively.The coefficient of determination,MARE,and root mean square error are 0.8670,0.06823,and 1.4265,respectively.The system exhibits desirable performance for applications in actual industrial pro-duction.
文摘Recycling of industrial waste is one of the effective ways to overcome their disposal problem. Ash produced by thermal power plants and lime sludge produced by paper mills require huge disposal land and may create environmental problems such as dusting and leaching of harmful heavy metals. Stabilization of the ash can improve its engineering properties and address the environmental problems. This paper reports the laboratory test results of a Class F pond ash stabilized with lime(2%, 4%, 6% and 8% by weight)alone and in combination with lime sludge(5%, 10% and 15% by weight). The X-ray diffraction(XRD) and scanning electron micrograph(SEM) tests were also performed to identify the possible formation of crystalline phases after stabilization. The effects of lime sludge on the unsoaked and soaked bearing ratios of pond ash with different lime contents, after 7 d, 28 d and 45 d of curing, were observed. Test results indicated that the bearing ratio increased considerably up to a 4% lime content which can be taken as the optimum lime content. Further increase in lime content increased bearing ratio gradually but at a slower rate. The effect of lime sludge was more pronounced at the optimum lime content,particularly at a low curing period. Lime sludge improved the bearing ratio in soaked condition significantly. Leachate analysis of stabilized ash was performed using toxicity characteristic leaching procedure(TCLP-1311) method. The concentrations of toxic elements Zn, Cu, Cd, Ni and Cr in the stabilized mixes were lower than those in the unstabilized waste. The results indicated that the pond ash-lime-lime sludge mixes have potential application as road subbase material.
文摘The present study is inscribed within the framework of the amelioration of the soils of the Santchou plain for employment as pavement subgrade. The bearing capacity proposed by these soils at their respective optimum dry densities is relatively small, although most of these experimental California Bearing Ratio (CBR) values of the studied soils are more important than the ones prescribed by the American Association of State Highway and Transportation Officials Classification system (AASHTO) for A5, A6, and A7 types. The stabilization of this soils with lime has been chosen to improve the bearing capacity and by association, their resilient modulus. The results of this study show that the increase of lime content is not proportional with the increase of the expected mechanical performances. In fact, the literature explains that when the lime content arrives at an optimum, the mechanical parameters no longer increase, but decrease significantly. After this optimum, the soil stabilization no longer shows advantages in the increase of geo-mechanical properties of soils.
文摘A new electric arc furnace (EAF) steelmaking process with increasing hot metal charging ratio and improving slagging regime simultaneously was developed and applied in a 50 t electric arc furnace for more than a year at No. 1 Steelmaking Plant of Shanxi Taigang Stainless Corporation Limited. The essential fact of the new EAF steelmaking process was to charge hot metal in two portions or steps: firstly, 35wt%-40wt% hot metal was pretreated by blowing oxygen in a specially designed reactor for decar burization and improving hot metal temperature and melting premelted slag; secondly, 30wt% hot metal was charged into EAF with high basicity refining slags from ladle furnace (LF)-vacuum degassing furnace (VD) refining process. The results show that the hot metal charging ratio can reach to about 65wt%-70wt% for the new EAF steelrnaking process; meanwhile, the tap-to-tap time of a 50 t EAF can shorten by 5-10 min, the electricity consumption can decrease by 35-50 kW·h/t, the lime consumption can reduce by 10.5 kg/t of molten steel, and the content of harmful heavy metals in molten steel can be easily controlled to less than the upper limits of aimed steel specification or grade compared with the traditional EAF steelmaking process. In addition, the dephosphorization ability shows a slight strengthening, however, a small degree of lessening for desulphurization ability is observed for the new EAF steelmaking process, but the weakness of desulphurization ability cannot become an obstacle to its further application since a stronger desulphurization ability can be achieved during secondary refining of LF coupled with VD after EAF steelmaking process.
基金the Federal University of Technology-Parana, to the CAPES, CNPqFundacao Araucaria do Parana in Brazil for financial support
文摘In the present study,unconfined compressive strength(qu)values of two lime-treated soils(soil 1 and 2)with curing times of 28 d,90 d and 360 d were optimized.The influence of void/lime ratio was represented by the porosity/volumetric lime content ratio(η/Liv)as the main parameter.η/Liv represents the volume of void influenced by compaction effort and lime volume.The evolution of qu was analyzed for each soil using the coefficient of determination as the optimization parameter.Aiming at providing adjustments to the mechanical resistance values,the η/Liv parameter was modified to η/LivC using the adjustment exponent C(to make qu-η/Liv variation rates compatible).The results show that with the decrease of η/LivC.qu increases potentially and the optimized values of C were 0.14-0.18.The mechanical resistance data show similar trends between qu and η/LivC for the studied silty soil-ground lime mixtures,which were cured at ambient temperature(23±2)℃ with different curing times of 28-360 d.Finally,optimized equations were presented using the normalized strengths and the proposed optimization model,which show 6% error and 95% acceptability on average.
文摘Through laboratory test, the relationships among change of compactibility, liquid/plastic limit, free swell, swell ratio without load, california bearing ratio (CBR) and soakage (after being soaked in water), and mix-ratio of quick lime and time were studied. The results show that optimum water content, plastic limit and CBR of high liquid limit clay improved by quick lime increase with the increase of mix-ratio of quick lime, while the maximum dry density, liquid limit, plasticity index, soakage (after being immersed in water), free swell, and swell ratio without load decrease with the increase of mix-ratio of quick lime. Plastic limit of high liquid clay improved by quick lime gradually increases with time, while the liquid limit, plasticity index, free swell and swell ratio without load gradually decrease with time. When the mix-ratio of quick lime exceeds 2%, after 14 d, swell ratio without load of the improved clay is zero, its free swell is about 30% of that of untreated soil, and its plasticity index is less than 26 for sub-grade material, satisfying the requirement by 'Specifications for Design of Highway Subgrade'.
文摘A series of triaxial compression tests were arried out by means of composite-reinforced soil samples to simulate the interaction between soil and pile. The samples are made of gravel or lime-soil with different length at the center. The experiment indicates that the strength of the composite samples can not be obtained by superimposure of reinforcing pile and soil simply according to their replacement proportion. It also indicates the law for stress ratio of reinforcing column to soil. The stress ratio of reinforcing column to soil increases and reaches peak rapidly while load and strain is small. Then the ratio decreases. This law is in accordance with the measuring resuits in construction site.