Quantifying the carbon source of pedogenic calcite veins in weathered limestone: implications for the terrestrial carbon cycle

The continent is the second largest carbon sink on Earth’s surface.With the diversification of vascular land plants in the late Paleozoic,terrestrial organic carbon burial is represented by massive coal formation,while the development of soil profiles would account for both organic and inorganic carbon burial.As compared with soil organic carbon,inorganic carbon burial,collectively known as the soil carbonate,would have a greater impact on the long-term carbon cycle.Soil carbonate would have multiple carbon sources,including dissolution of host calcareous rocks,dissolved inorganic carbon from freshwater,and oxidation of organic matter,but the host calcareous rock dissolution would not cause atmospheric CO2drawdown.Thus,to evaluate the potential effect of soil carbonate formation on the atmospheric p CO2level,different carbon sources of soil carbonate should be quantitatively differentiated.In this study,we analyzed the carbon and magnesium isotopes of pedogenic calcite veins developed in a heavily weathered outcrop,consisting of limestone of the early Paleogene Guanzhuang Group in North China.Based on the C and Mg isotope data,we developed a numerical model to quantify the carbon source of calcite veins.The modeling results indicate that4–37 wt%of carbon in these calcite veins was derived from atmospheric CO2.The low contribution from atmospheric CO2might be attributed to the host limestone that might have diluted the atmospheric CO2sink.Nevertheless,taking this value into consideration,it is estimated that soil carbonate formation would lower 1 ppm atmospheric CO2within 2000 years,i.e.,soil carbonate alone would sequester all atmospheric CO2within 1 million years.Finally,our study suggests the C–Mg isotope system might be a better tool in quantifying the carbon source of soil carbonate.

Determination of F,S(total),and Cl in the Calcite Rich Limestone and Marbles by WD-XRF Spectrometry

Determining the contents of F,S(total),and Cl in the studied samples of the limestone and marbles with high calcite contents was carried out by the nondestructive method of WDXRFS(Wavelength Dispersive X-ray Fluorescence Spectrometry).All measurements were performed in a vacuum condition using a WDXRF spectrometer S8 TIGER(Bruker AXS,Germany).The studied samples have wide ranges of F,S(total),and Cl contents,and high concentration of calcite(89.5%-99%).Main objective of this research is to develop WDXRF(WD X-ray fluorescence)technique for the determination of F,S(total),and Cl.The calculated values of the ILD(instrumental limit of the detection)were within the interval from 3 for S(total)to 37 for F mg/kg.The repeatability was found to be satisfactory with the relative standard deviations lower than 7%.

The Mineral Geochemical Discrimination of the Calcite Crystals in the Pores of Upper Ordovician Limestone and Its Environmental Significance: Take Tazhong Oilfield of Tarim Basin for Example

Based on the analysis of the morphology, order, cathodoluminescence and microelement of the calcite crystals in the pores of Upper Ordovician limestone in Tazhong oilfield of Tarim Basin, this paper suggest that the calcite crystals can divided 11 kinds of cements into three stages, and confirms their cementation sequence characteristics and formation environment. First stage of the cementation occurred on the bottom of the diagenetic environment, the product of which mainly are microcrystalline, fine shape, radiation fibrous, fasciculation, radiation axis shape calcites and a ball-like aragonite, whose filling pore is 0%–30%; the second one occurred in the atmospheric fresh water environment, with main cement types of crescent or pendulous shape, vadose silt, hyperplasia of coaxial, the filling pore of which is 5%–100%; the third one occurred in a burial environment, the crystals of which are bright and thick, mainly coarse sparry and poikilitic calcite, with filling pore of 5%–5%. In this paper, influence from each stage of cementation on porosity is analyzed, and pore evolution is established.

Diffusion and reaction mechanism of limestone and quartz in fluxed iron ore pellet roasting process

The increase to the proportion of fluxed pellets in the blast furnace burden is a useful way to reduce the carbon emissions in the ironmaking process.In this study,the interaction between calcium carbonate and iron ore powder and the mineralization mechanism of fluxed iron ore pellet in the roasting process were investigated through diffusion couple experiments.Scanning electron microscopy with energy dispersive spectroscopy was used to study the elements’diffusion and phase transformation during the roasting process.The results indicated that limestone decomposed into calcium oxide,and magnetite was oxidized to hematite at the early stage of preheating.With the increase in roasting temperature,the diffusion rate of Fe and Ca was obviously accelerated,while the diffusion rate of Si was relatively slow.The order of magnitude of interdiffusion coefficient of Fe_(2)O_(3)-CaO diffusion couple was 10^(−10) m^(2)·s^(−1) at a roasting temperature of 1200℃for 9 h.Ca_(2)Fe_(2)O_(5) was the initial product in the Fe_(2)O_(3)-CaO-SiO_(2) diffusion interface,and then Ca_(2)Fe_(2)O_(5) continued to react with Fe_(2)O_(3) to form CaFe_(2)O_(4).With the expansion of the diffusion region,the sillico-ferrite of calcium liquid phase was produced due to the melting of SiO_(2) into CaFe_(2)O_(4),which can strengthen the consolidation of fluxed pellets.Furthermore,andradite would be formed around a small part of quartz particles,which is also conducive to the consolidation of fluxed pellets.In addition,the principle diagram of limestone and quartz diffusion reaction in the process of fluxed pellet roasting was discussed.

Determination of C_((total))and O_((total))in the Calcite Rich Limestones by WD-XRF Spectrometry

Carbon and oxygen XRF spectra were studied using a WDXRF(WD X-ray fluorescence)spectrometer S8 TIGER(Bruker AXS,Germany).XRF spectra were obtained from the samples of the calcareous spar(CaCO3)(pure calcium carbonate),the limestones,the graphite,the microcrystalline cellulose,various organic compounds and prepared mixtures on the basis of the calcareous spar with addition of the graphite and the microcrystalline cellulose.The studied samples of the limestones are characterized by high concentrations of calcite(98.5-99%).Main objective of this investigation is to develop WDXRF technique for the determination of C(total)and O(total).Optimal instrumental measuring conditions were selected experimentally for quantitative determination of C(total)and O(total).The calculated values of the ILD(instrumental limit of the detection)vary from 0.0215%for C(total)to 0.0331%for O(total),respectively.The obtained values of the LDM(limit of determination of the XRF method)do not exceed 0.08%for C(total)and O(total).The RSDs(relative standard deviations)values do not exceed 1.0%in all cases.

Coupled multiphysical model for investigation of influence factors in the application of microbially induced calcite precipitation

The study presents a comprehensive coupled thermo-bio-chemo-hydraulic(T-BCH)modeling framework for stabilizing soils using microbially induced calcite precipitation(MICP).The numerical model considers relevant multiphysics involved in MICP,such as bacterial ureolytic activities,biochemical reactions,multiphase and multicomponent transport,and alteration of the porosity and permeability.The model incorporates multiphysical coupling effects through well-established constitutive relations that connect parameters and variables from different physical fields.It was implemented in the open-source finite element code OpenGeoSys(OGS),and a semi-staggered solution strategy was designed to solve the couplings,allowing for flexible model settings.Therefore,the developed model can be easily adapted to simulate MICP applications in different scenarios.The numerical model was employed to analyze the effect of various factors,including temperature,injection strategies,and application scales.Besides,a TBCH modeling study was conducted on the laboratory-scale domain to analyze the effects of temperature on urease activity and precipitated calcium carbonate.To understand the scale dependency of MICP treatment,a large-scale heterogeneous domain was subjected to variable biochemical injection strategies.The simulations conducted at the field-scale guided the selection of an injection strategy to achieve the desired type and amount of precipitation.Additionally,the study emphasized the potential of numerical models as reliable tools for optimizing future developments in field-scale MICP treatment.The present study demonstrates the potential of this numerical framework for designing and optimizing the MICP applications in laboratory-,prototype-,and field-scale scenarios.

Flotation separation of scheelite from calcite using luteolin as a novel depressant

This paper proposes luteolin(LUT)as a novel depressant for the flotation-based separation of scheelite and calcite in a sodium oleate(NaOL)system.The suitability of LUT as a calcite depressant is confirmed through micro-flotation testing.At pH=9,with LUT concentration of 50 mg·L^(-1) and NaOL concentration of 50 mg·L^(-1),scheelite recovery reaches 80.3%.Calcite,on the other hand,exhibits a recovery rate of 17.6%,indicating a significant difference in floatability between the two minerals.Subsequently,the surface modifica-tions of scheelite and calcite following LUT treatment are characterized using adsorption capacity testing,Zeta potential analysis,Fourier transform infrared spectroscopy(FT-IR),X-ray photoelectron spectroscopy(XPS),and atomic force microscopy(AFM).The study in-vestigates the selective depressant mechanism of LUT on calcite.Adsorption capacity testing and Zeta potential analysis demonstrate sub-stantial absorption of LUT on the surface of calcite,impeding the further adsorption of sodium oleate,while its impact on scheelite is min-imal.FT-IR and XPS analyses reveal the selective adsorption of LUT onto the surface of calcite,forming strong chemisorption bonds between the hydroxyl group and calcium ions present.AFM directly illustrates the distinct adsorption densities of LUT on the two miner-al types.Consequently,LUT can effectively serve as a depressant for calcite,enabling the successful separation of scheelite and calcite.

The Influence of Limestone Powder and Metakaolin Co-Blending on the Hydration Process and Mechanical Properties of Q-Phase Cement

A ternary system comprising Ca_(20)Al_(26)Mg_(3)Si_(3)O_(68)(Q-phase),limestone,and metakaolin is proposed,and its hydration behavior,hydration product phases,microstructure,and mechanical properties are investigated and compared with pure Q-phase cement.The results indicate that the ternary system exhibits exceptional and sustained compressive strength even under a 40℃environment,significantly outperforming pure Q-phase.The mechanism lies in that metakaolin effectively inhibits the transformation of metastable phase.Meanwhile,the interactions among Q-phase,limestone,and metakaolin further enhance the cementitious performance.The ternary system effectively addresses potential issues of strength loss in Q-phase cement application,and as a low-carbon cementitious material system,it holds promising potential applications.

Flotation separation of brucite and calcite in dodecylamine system enhanced by regulator potassium dihydrogen phosphate

To achieve efficient flotation separation of brucite and calcite,flotation separation experiments were conducted on two minerals using dodecylamine(DDA)as the collector and potassium dihydrogen phosphate(PDP)as the regulator.The action mechanism of DDA and PDP was explored through contact angle measurement,zeta potential detection,solution chemistry calculation,FTIR analysis,and XPS detection.The flotation results showed that when DDA dosage was 35 mg/L and PDP dosage was 40 mg/L,the maximum floating difference between brucite and calcite was 79.81%,and the selectivity separation index was 6.46.The detection analysis showed that the main dissolved component HPO_(4)^(2−)of PDP is selectively strongly adsorbed on the Ca site on the surface of calcite,promoting the adsorption of the main dissolved component RNH_(3)^(+)of DDA on calcite surface,while brucite is basically not affected by PDP.Therefore,PDP is an effective regulator for the reverse flotation separation of brucite and calcite in DDA system.

Graph theoretical analysis of limestone fracture network damage patterns based on uniaxial compression test

The topological attributes of fracture networks in limestone,subject to intense hydrodynamics and intricate geological discontinuities,substantially influence the mechanical and hydraulic characteristics of the rock mass.The dynamical evolution of fracture networks under stress is crucial for unveiling the interaction patterns among fractures.However,existing models are undirected graphs focused on stationary topology,which need optimization to depict fractures'dynamic development and rupture process.To compensate for the time and destruction terms,we propose the damage network model,which defines the physical interpretation of fractures through the ternary motif.We focus primarily on the evolution of node types,topological attributes,and motifs of the fracture network in limestone under uniaxial stress.Observations expose the varying behavior of the nodes'self-dynamics and neighbors'adjacent dynamics in the fracture network.This approach elucidates the impact of micro-crack behaviors on large brittle shear fractures from a topological perspective and further subdivides the progressive failure stage into four distinct phases(isolated crack growth phase,crack splay phase,damage coalescence phase,and mechanical failure phase)based on the significance profile of the motif.Regression analysis reveals a positive linear and negative power correlation between fracture network density and branch number to the rock damage resistance,respectively.The damage network model introduces a novel methodology for depicting the interaction of two-dimensional(2D)projected fractures,considering the dynamic spatiotemporal development characteristics and fracture geometric variation.It helps dynamically characterize properties such as connectivity,permeability,and damage factors while comprehensively assessing damage in rock mass fracture networks.

Further study on the genesis of lamellar calcite veins in lacustrine black shale--A case study of Paleogene in Dongying Depression, China

Lamellar calcite veins are prevalent in carbonate-rich,lacustrine dark shale.The formation mechanisms of these veins have been extensively debated,focusing on factors such as timing,depth,material source,and driving forces.This paper examines dark lacustrine shale lamellar calcite veins in the Paleogene strata of Dongying Depression,using various analytical techniques:petrography,isotope geochemistry,cathodoluminescence,inclusion thermometry,and electron probe micro-analysis.Two distinct types of calcite veins have been identified:granular calcite veins and sparry calcite veins.These two types differ significantly in color,grain structure,morphology,and inclusions.Through further investigation,it was observed that vein generation occurred from the shallow burial period to the maturation of organic matter,with a transition from granular calcite veins to sparry calcite veins.The granular calcite veins exhibit characteristics associated with the shallow burial period,including plastically deformed laminae and veins,the development of strawberry pyrite,the absence of oil and gas,weak fractionation in oxygen isotopes,and their contact relationship with sparry calcite veins.These granular calcite veins were likely influenced by the reduction of sulfate bacteria.On the other hand,sparry calcite veins with fibrous grains are antitaxial and closely linked to the evolution and maturation of organic matter.They contain oil and gas inclusions and show a distribution range of homogenization temperature between 90℃ and 120℃ and strong fractionation in oxygen isotopes,indicating formation during the hydrocarbon expulsion period.The carbon isotope analysis of the surrounding rocks and veins suggests that the material for vein formation originates from the shale itself,specifically authigenic micritic calcite modified by the action of methanogens.The opening of horizontal fractures and vein formation is likely driven by fluid overpressure resulting from undercompaction and hydrocarbon expulsion.Veins may form rapidly or through multi-stage composite processes.Early veins are predominantly formed in situ,while late veins are a result of continuous fluid migration and convergence.Furthermore,the veins continue to undergo modification even after formation.This study emphasizes that the formation of lamellar calcite veins in shale is a complex diagenetic process influenced by multiple factors:biology,organic matter,and inorganic processes,all operating at various stages throughout the shale's diagenetic history.

Water-induced physicochemical and pore changes in limestone for surrounding rock across pressure aquifers

Osmotic water alters the physicochemical properties and internal structures of limestone.This issue is particularly critical in tunnel construction across mountainous regions with aquifers,where pressurized groundwater can destabilize the limestone-based surrounding rock.Thus,systematic research into the physicochemical properties and pore structure changes in the limestone under pressurized water is essential.Additionally,it is essential to develop an interpretable mathematical model to accurately depict how pressurized osmotic water weakens limestone.In this research,a specialized device was designed to simulate the process of osmotic laminar flow within limestone.Then,four main tests were conducted:mass loss,acoustic emission(AE),mercury intrusion porosimetry(MIP),and fluorescence analysis.Experimental results gained from tests led to the development of a“Particle-pore throat-water film”model.Proposed model explains water-induced physicochemical and pore changes in limestone under osmotic pressure and reveals evolutionary mechanisms as pressure increases.Based on experimental results and model,we found that osmotic pressure not only alters limestone composition but also affects pore throats larger than 0.1μm.Furthermore,osmotic pressure expands pore throats,enhancing pore structure uniformity,interconnectivity,and permeability.These effects are observed at a threshold of 7.5 MPa,where cohesive forces within the mineral lattice are surpassed,leading to the breakdown of erosion-resistant layer and a significant increase in hydrochemical erosion.

Effect of diagenetic variation on the static and dynamic mechanical behavior of coral reef limestone

Coral reef limestone at different depositional depths and facies differ remarkably on the textural and mineralogical characteristics,owing to the complex sedimentary diagenesis.To explore the effects of pore structure and mineral composition associated with diagenetic variation on the mechanical behavior of reef limestone,a series of quasi-static and dynamic compression tests along with microscopic examinations were performed on the reef limestone at shallow and deep burial depths.It is revealed that the shallow reef limestone(SRL)is classified as a porous aragonite-type carbonate rock with high porosity(55.3±3.2)%and pore connectivity.In comparison,the deep reef limestone(DRL)is mainly composed of dense calcite-type calcium carbonate with low porosity(4.9±1.6)%and pore connectivity.The DRL strengthened and stiffened by the tight grain framework consistently displays much higher values of the dynamic compressive strength,elastic modulus,brittleness index,and specific energy absorption than those of the SRL.The gap between two types of limestone further increases with an increase in strain rate.It appears that the failure pattern of SRL is dominated by the inherent defects like weak bonding interfaces and growth lines,revealed by the intricate fracturing network and mixed failure.Likewise,although the preexisting megapores in DRL may affect the crack propagation on pore tips to a certain distance,it hardly alters the axial splitting failure of DRL under impacts.The stress wave propagation and attenuation in SRL is primarily controlled by the reflection and diffusion caused by plenty mesopores,as well as an energy dissipation in layer-wise pore collapse and adjacent grain crushing,while the stress wave in DRL is highly hinged on the insulation and diffraction induced by the isolated megapores.This process is accompanied by the energy dissipation behavior of inelastic deformation resulted from the pore-emanated microcracking.

Experimental Study on the Chloride Ion Concentration of Cement Pastes Prepared with Limestone Powder

To investigate the impact of limestone powder on the chloride ion concentration coefficient of cement pastes,various techniques such as scanning electron microscopy(SEM),X-ray diffraction(XRD),thermogravimetric analysis(TGA),and mercury-porosimetry(MIP)were employed in this paper.The findings demonstrate that the creation of Friedel's salt is inversely associated with the addition of limestone powder,that is,Friedel's salt production is lessened by adding more limestone powder,however,the coefficient of chloride ion concentration initially decreased and then increased again,as does the porosity,and most likely the pore size as well.The specific surface area of limestone powder has increased,and the content of Friedel’s salt increased first and then decreased.However,the shifting trend of Friedel's salt and chloride ion concentration coefficient is in direct opposition,and the pore structure was therefore significantly enhanced.The results of this study offer robust theoretical backing for the inclusion of limestone powder in concrete and provide a positive assessment of its potential applications.

Dominance of rock exposure and soil depth in leaf trait networks outweighs soil quality in karst limestone and dolomite habitats

Leaf trait networks(LTNs)visualize the intricate linkages reflecting plant trait-functional coordination.Typical karst vegetation,developed from lithological dolomite and limestone,generally exhibits differential communities,possibly due to habitat rock exposure,soil depth,and soil physicochemical properties variations,leading to a shift from plant trait variation to functional linkages.However,how soil and habitat quality affect the differentiation of leaf trait networks remains unclear.LTNs were constructed for typical dolomite and limestone habitats by analyzing twenty-one woody plant leaf traits across fifty-six forest subplots in karst mountains.The differences between dolomite and limestone LTNs were compared using network parameters.The network association of soil and habitat quality was analyzed using redundancy analysis(RDA),Mantle's test,and a random forest model.The limestone LTN exhibited significantly higher edge density with lower diameter and average path length when compared to the dolomite LTN.It indicates LTN differentiation,with the limestone network displaying a more compact architecture and higher connectivity than the dolomite network.The specific leaf phosphorus and leaf nitrogen contents of dolomite LTN,as well as the leaf mass and leaf carbon contents of limestone LTN,significantly contributed to network degree and closeness,serving as crucial node traits regulating LTN connectedness.Additionally,both habitat LTNs significantly correlated with soil nitrogen and phosphorus,stoichiometric ratios,pH,and organic carbon,as well as soil depth and rock exposure rates,with soil depth and rock exposure showing greater relative importance.Soil depth and rock exposure dominate trait network differentiation,with the limestone habitat exhibiting a more compact network architecture than the dolomite habitat.

A machine learning-based strategy for predicting the mechanical strength of coral reef limestone using X-ray computed tomography

Different sedimentary zones in coral reefs lead to significant anisotropy in the pore structure of coral reef limestone(CRL),making it difficult to study mechanical behaviors.With X-ray computed tomography(CT),112 CRL samples were utilized for training the support vector machine(SVM)-,random forest(RF)-,and back propagation neural network(BPNN)-based models,respectively.Simultaneously,the machine learning model was embedded into genetic algorithm(GA)for parameter optimization to effectively predict uniaxial compressive strength(UCS)of CRL.Results indicate that the BPNN model with five hidden layers presents the best training effect in the data set of CRL.The SVM-based model shows a tendency to overfitting in the training set and poor generalization ability in the testing set.The RF-based model is suitable for training CRL samples with large data.Analysis of Pearson correlation coefficient matrix and the percentage increment method of performance metrics shows that the dry density,pore structure,and porosity of CRL are strongly correlated to UCS.However,the P-wave velocity is almost uncorrelated to the UCS,which is significantly distinct from the law for homogenous geomaterials.In addition,the pore tensor proposed in this paper can effectively reflect the pore structure of coral framework limestone(CFL)and coral boulder limestone(CBL),realizing the quantitative characterization of the heterogeneity and anisotropy of pore.The pore tensor provides a feasible idea to establish the relationship between pore structure and mechanical behavior of CRL.

Adsorption behavior of CO_(2)/H_(2)S mixtures in calcite slit nanopores for CO_(2) storage:An insight from molecular perspective

It is acknowledged that injecting CO_(2) into oil reservoirs and saline aquifers for storage is a practical and affordable method for CO_(2) sequestration.Most CO_(2) produced from industrial exhaust contains impurity gases such as H_(2)S that might impact CO_(2) sequestration due to competitive adsorption.This study makes a commendable effort to explore the adsorption behavior of CO_(2)/H_(2)S mixtures in calcite slit nanopores.Grand Canonical Monte Carlo(GCMC)simulation is employed to reveal the adsorption of CO_(2),H_(2)S as well as their binary mixtures in calcite nanopores.Results show that the increase in pressure and temperature can promote and inhibit the adsorption capacity of CO_(2) and H_(2)S in calcite nanopores,respectively.CO_(2)exhibits stronger adsorption on calcite surface than H_(2)S.Electrostatic energy plays the dominating role in the adsorption behavior.Electrostatic energy accounts for 97.11%of the CO_(2)-calcite interaction energy and 56.33%of the H_(2)S-calcite interaction energy at 10 MPa and 323.15 K.The presence of H_(2)S inhibits the CO_(2) adsorption in calcite nanopores due to competitive adsorption,and a higher mole fraction of H_(2)S leads to less CO_(2) adsorption.The quantity of CO_(2) adsorbed is lessened by approximately 33%when the mole fraction of H_(2)S reaches 0.25.CO_(2) molecules preferentially occupy the regions near the po re wall and H_(2)S molecules tend to reside at the center of nanopore even when the molar ratio of CO_(2) is low,indicating that CO_(2) has an adsorption priority on the calcite surface over H_(2)S.In addition,moisture can weaken the adsorption of both CO_(2) and H_(2)S,while CO_(2) is more affected.More interestingly,we find that pure CO_(2) is more suitable to be sequestrated in the shallower formations,i.e.,500-1500 m,whereas CO_(2)with H_(2)S impurity should be settled in the deeper reservoirs.

Anisotropic surface broken bond properties and wettability of calcite and fluorite crystals

Anisotropic surface broken bond densities of six different surfaces of calcite and three surfaces of fluorite were calculated. In terms of the calculated results, the commonly exposed surfaces of the two minerals were predicted and the relations between surface broken bonds densities and surface energies were analyzed. Then the anisotropic wettability of the commonly exposed surfaces was studied by means of contact angle measurement. The calculation results show that the （101^-4）, （213^-4）and （01 1^-8）surfaces for calcite and （111） for fluorite are the most commonly exposed surfaces and there is a good rectilinear relation between surface broken bond density and surface energy with correlation of determination （R^2） of 0.9613 and 0.9969, respectively. The anisotropic wettability of different surfaces after immersing in distilled water and sodium oleate solutions at different concentrations can be explained by anisotropic surface broken bond densities and active Ca sites densities, respectively.

Study on the Characteristics of Main Vegetation Communities in the Limestone Region of Taihang Mountain

[Objective] The aim was to study the characteristics of main vegetation communities in the limestone region of Taihang Mountain,so as to lay foundation for the further improvement of site conditions and the scientific breeding of vegetation used to restore the mountain field in limestone region.[Method] Based on the investigation of various vegetation communities in controlled test area,forbidden region and barren hillsides in Daqing Mountain basin,Beishui Valley,Mancheng County,Hebei Province,the difference among controlled region,forbidden region and barren hillsides could be found through data analysis and composite score,and the modes of vegetation communities in controlled region and forbidden region were compared to select predominant species of arbor,shrub and grass in limestone region.[Result] Under the similar site conditions,nutrient content and physical properties of soil in controlled region and forbidden region were superior to those of barren hillsides,and persimmon had high nutrient content and better physical properties compared with oriental arborvitae in controlled region;soil water maintenance and litter characters in controlled region and forbidden region improved more obviously than that of barren hillsides,and shrubbery in forbidden region was the most excellent,arborvitae and persimmon in controlled region the second;the biomass and the coverage rate of vegetation communities in controlled region and forbidden region were higher than those of barren hillsides,and those of shrubbery in forbidden region were better than tussock in closing hill,while persimmon was better than arborvitae in controlled region.The predominant species of arbor,shrub and herbage were obtained through composite score.[Conclusion] From the aspects of soil nutrient,physical properties,soil water maintenance,litter characters,vegetation biomass,canopy density and coverage,controlled region and forbidden region were superior to barren hillsides,and the selection of predominant species of arbor,shrub and herbage considered both ecological and economic benefits.

Ordovician limestone aquosity prediction using nonlinear seismic attributes:Case from the Xutuan coal mine

Ordovician limestone water is coal mines. In this paper, we analyze the the main source of water inrush in North China characteristic of three kinds of nonlinear seismic attributes, such as the largest lyapunov exponent,fractal dimension and entropy and introduce their calculation methods. Taking the 81st and 82nd coal districts in the Xutuan coal mine as examples, we extract the three seismic attributes based on the 3D prestack migration seismic data of this area, which can display the Ordovician limestone fracture distribution in the mine. We comprehensively analyzed the three nonlinear seismic attributes and compared the results with transient electromagnetic exploration results and determined the possible Ordovician limestone aquosity distribution. This demonstrated that the nonlinear seismic attributes technology is an effective approach to predict the aquosity of Ordovician limestone.