Coronary artery calcium data and reporting system(CAC-DRS)is a recently introduced standardized reporting system for calcium scoring on computed tomography.CAC-DRS provides four risk categories(0,1,2 and 3)along with ...Coronary artery calcium data and reporting system(CAC-DRS)is a recently introduced standardized reporting system for calcium scoring on computed tomography.CAC-DRS provides four risk categories(0,1,2 and 3)along with treatment recommendations for each category.As with any other new reporting platform,CAC-DRS has both advantages and disadvantages.Improved communication,better clarity of details,organized management recommendations and utility in future research and education are the major strengths of CAC-DRS.It has many limitations such as questionable need for a new system,few missing components,use of a less accurate visual method and treatment suggestions based on expert opinion instead of clinical trials.In this contemporary review,we discuss the new reporting system CAC-DRS,its application,strengths and limitations and conclude with some remarks for the future.展开更多
The method of determining coal pillar strength equations from databases of stable and failed case histories is more than 50 years old and has been applied in different countries by different researchers in a range of ...The method of determining coal pillar strength equations from databases of stable and failed case histories is more than 50 years old and has been applied in different countries by different researchers in a range of mining situations. While common wisdom sensibly limits the use of the resultant pillar strength equations and methods to design scenarios that are consistent with the founding database, there are a number of examples where failures have occurred as a direct result of applying empirical design methods to coal pillar design problems that are inconsistent with the founding database. This paper explores the reasons why empirically derived coal pillar strength equations tend to be problem-specific and should be considered as providing no more than a pillar strength ‘‘index." These include the non-consideration of overburden horizontal stress within the mine stability problem, an inadequate definition of supercritical overburden behavior as it applies to standing coal pillars, and the non-consideration of overburden displacement and coal pillar strain limits. All of which combine to potentially complicate and confuse the back-analysis of coal pillar strength from failed cases. A modified coal pillar design representation and model are presented based on coal pillars acting to reinforce a horizontally stressed overburden, rather than suspend an otherwise unstable self-loaded overburden or section, the latter having been at the core of historical empirical studies into coal pillar strength and stability.展开更多
With applied dislocation theory,the effects of shear and normal stresses on the slide and climb motions at the same section of a crystal were analyzed.And,based on the synergetic effect of both normal and shear strain...With applied dislocation theory,the effects of shear and normal stresses on the slide and climb motions at the same section of a crystal were analyzed.And,based on the synergetic effect of both normal and shear strain specific energies,the concept of the total equivalent strain specific energy(TESSE)at an oblique section and a new strength theory named as limiting strain energy strength theory(LSEST)were proposed.As for isotropic materials,the plastic yielding or brittle fracture of under uniaxial stress state would occur when the maximum TESSE reached the strain specific energy,also the expressions on the equivalent stresses and a function of failure of the LSEST under different principal stress states were obtained.Relationship formulas among the tensile, compressive and shear yield strengths for plastic metals were derived.These theoretical predictions,according to the LSEST,were consistent very well with experiment results of tensile,compressive and torsion tests of three plastic metals and other experiment results from open literatures.This novel LSEST might also help for strength calculation of other materials.展开更多
The surface yield strength(σ_(ms))for various carbon steels was studied by means of X-ray diffraction method.The results showed that it is.far below the bulk yield strength,and is the resistance against plastic defor...The surface yield strength(σ_(ms))for various carbon steels was studied by means of X-ray diffraction method.The results showed that it is.far below the bulk yield strength,and is the resistance against plastic deformation in the surface layer.The smooth fatigue limit is associ- ated with crack initiation which is a result of accumulation of plastic deformation.Experimen- tal results showed the relation of smooth fatigue limit for 50% survival with σ_(ms)is σ_(ms)=0.81 tO 1.02 σ_(-1)for different steels.The smooth fatigue limit of a medium carbon steel for 99.9% survival with σ_(ms)is σ_(ms)=0.98 tO 1.10 σ_(-1).It is less expensive and time consuming to measure σ_(ms)than σ_(-1).展开更多
Overhanging rock slopes(steeper than 90°) are typically avoided in rock engineering design, particularly where the scale of the slope exceeds the scale of fracturing present in the rock mass. This paper highlight...Overhanging rock slopes(steeper than 90°) are typically avoided in rock engineering design, particularly where the scale of the slope exceeds the scale of fracturing present in the rock mass. This paper highlights an integrated approach of designing overhanging rock slopes where the relative dimensions of the slope exceed the scale of fracturing and the rock mass failure needs to be considered rather than kinematic release of individual blocks. The key to the method is a simplified limit equilibrium(LE) tool that was used for the support design and analysis of a multi-faceted overhanging rock slope. The overhanging slopes required complex geometries with constantly changing orientations. The overhanging rock varied in height from 30 m to 66 m. Geomechanical modelling combined with discrete fracture network(DFN)representation of the rock mass was used to validate the rock mass strength assumptions and the failure mechanism assumed in the LE model. The advantage of the simplified LE method is that buttress and support design iterations(along with sensitivity analysis of design parameters) can be completed for various cross-sections along the proposed overhanging rock sections in an efficient manner, compared to the more time-intensive, sophisticated methods that were used for the initial validation. The method described presents the development of this design tool and assumptions made for a specific overhanging rock slope design. Other locations will have different geological conditions that can control the potential behaviour of rock slopes, however, the approach presented can be applied as a general guiding design principle for overhanging rock cut slope.展开更多
文摘Coronary artery calcium data and reporting system(CAC-DRS)is a recently introduced standardized reporting system for calcium scoring on computed tomography.CAC-DRS provides four risk categories(0,1,2 and 3)along with treatment recommendations for each category.As with any other new reporting platform,CAC-DRS has both advantages and disadvantages.Improved communication,better clarity of details,organized management recommendations and utility in future research and education are the major strengths of CAC-DRS.It has many limitations such as questionable need for a new system,few missing components,use of a less accurate visual method and treatment suggestions based on expert opinion instead of clinical trials.In this contemporary review,we discuss the new reporting system CAC-DRS,its application,strengths and limitations and conclude with some remarks for the future.
文摘The method of determining coal pillar strength equations from databases of stable and failed case histories is more than 50 years old and has been applied in different countries by different researchers in a range of mining situations. While common wisdom sensibly limits the use of the resultant pillar strength equations and methods to design scenarios that are consistent with the founding database, there are a number of examples where failures have occurred as a direct result of applying empirical design methods to coal pillar design problems that are inconsistent with the founding database. This paper explores the reasons why empirically derived coal pillar strength equations tend to be problem-specific and should be considered as providing no more than a pillar strength ‘‘index." These include the non-consideration of overburden horizontal stress within the mine stability problem, an inadequate definition of supercritical overburden behavior as it applies to standing coal pillars, and the non-consideration of overburden displacement and coal pillar strain limits. All of which combine to potentially complicate and confuse the back-analysis of coal pillar strength from failed cases. A modified coal pillar design representation and model are presented based on coal pillars acting to reinforce a horizontally stressed overburden, rather than suspend an otherwise unstable self-loaded overburden or section, the latter having been at the core of historical empirical studies into coal pillar strength and stability.
文摘With applied dislocation theory,the effects of shear and normal stresses on the slide and climb motions at the same section of a crystal were analyzed.And,based on the synergetic effect of both normal and shear strain specific energies,the concept of the total equivalent strain specific energy(TESSE)at an oblique section and a new strength theory named as limiting strain energy strength theory(LSEST)were proposed.As for isotropic materials,the plastic yielding or brittle fracture of under uniaxial stress state would occur when the maximum TESSE reached the strain specific energy,also the expressions on the equivalent stresses and a function of failure of the LSEST under different principal stress states were obtained.Relationship formulas among the tensile, compressive and shear yield strengths for plastic metals were derived.These theoretical predictions,according to the LSEST,were consistent very well with experiment results of tensile,compressive and torsion tests of three plastic metals and other experiment results from open literatures.This novel LSEST might also help for strength calculation of other materials.
文摘The surface yield strength(σ_(ms))for various carbon steels was studied by means of X-ray diffraction method.The results showed that it is.far below the bulk yield strength,and is the resistance against plastic deformation in the surface layer.The smooth fatigue limit is associ- ated with crack initiation which is a result of accumulation of plastic deformation.Experimen- tal results showed the relation of smooth fatigue limit for 50% survival with σ_(ms)is σ_(ms)=0.81 tO 1.02 σ_(-1)for different steels.The smooth fatigue limit of a medium carbon steel for 99.9% survival with σ_(ms)is σ_(ms)=0.98 tO 1.10 σ_(-1).It is less expensive and time consuming to measure σ_(ms)than σ_(-1).
文摘Overhanging rock slopes(steeper than 90°) are typically avoided in rock engineering design, particularly where the scale of the slope exceeds the scale of fracturing present in the rock mass. This paper highlights an integrated approach of designing overhanging rock slopes where the relative dimensions of the slope exceed the scale of fracturing and the rock mass failure needs to be considered rather than kinematic release of individual blocks. The key to the method is a simplified limit equilibrium(LE) tool that was used for the support design and analysis of a multi-faceted overhanging rock slope. The overhanging slopes required complex geometries with constantly changing orientations. The overhanging rock varied in height from 30 m to 66 m. Geomechanical modelling combined with discrete fracture network(DFN)representation of the rock mass was used to validate the rock mass strength assumptions and the failure mechanism assumed in the LE model. The advantage of the simplified LE method is that buttress and support design iterations(along with sensitivity analysis of design parameters) can be completed for various cross-sections along the proposed overhanging rock sections in an efficient manner, compared to the more time-intensive, sophisticated methods that were used for the initial validation. The method described presents the development of this design tool and assumptions made for a specific overhanging rock slope design. Other locations will have different geological conditions that can control the potential behaviour of rock slopes, however, the approach presented can be applied as a general guiding design principle for overhanging rock cut slope.
