An approach for determination of lateral limit angle in kinematic planar sliding analysis for rock slopes

Planar sliding is one of the frequently observed types of failure in rock slopes.Kinematic analysis is a classic and widely used method to examine the potential failure modes in rock masses.The accuracy of planar sliding kinematic analysis is significantly influenced by the value assigned to the lateral limit angleγlim.However,the assignment ofγlim is currently used generally based on an empirical criterion.This study aims to propose an approach for determining the value ofγlim in deterministic and probabilistic kinematic planar sliding analysis.A new perspective is presented to reveal thatγlim essentially influences the probability of forming a potential planar sliding block.The procedure to calculate this probability is introduced using the block theory method.It is found that the probability is correlated with the number of discontinuity sets presented in rock masses.Thus,different values ofγlim for rock masses with different sets of discontinuities are recommended in both probabilistic and deterministic planar sliding kinematic analyses;whereas a fixed value ofγlim is commonly assigned to different types of rock masses in traditional method.Finally,an engineering case was used to compare the proposed and traditional kinematic analysis methods.The error rates of the traditional method vary from 45%to 119%,while that of the proposed method ranges between 1%and 17%.Therefore,it is likely that the proposed method is superior to the traditional one.

Combined treatment of phacoemulsification and single-port limited pars plana vitrectomy in acute angle-closure glaucoma

AIM: To evaluate the efficacy of combined treatment of phacoemulsification(PE) and micro-incisional single-port transconjunctival limited pars plana vitrectomy(PPV) in acute angle-closure glaucoma(AACG).METHODS: A retrospective study included 26 patients who underwent PE diagnosed with AACG. Among them, 16 patients(16 eyes) underwent PE alone, 10 patients(10 eyes) underwent combined limited vitrectomy and PE. Then we compared intraocular pressure(IOP), anterior chamber angle, anterior chamber depth, central corneal thickness and corneal endothelial cell count before and after surgery, and effective PE time during cataract surgery.RESULTS: Effective PE time was shorter in the combined surgery group than in the single surgery group(P=0.040). There was no statistically significant difference in IOP and best-corrected visual acuity between the two groups postoperatively. At 6 mo postoperatively, there was no difference in the anterior chamber angle, anterior chamber depth, and central corneal thickness between two groups, but corneal endothelial cell count was higher in the combined surgery group than in the single surgery group(P=0.046). No complication such as vitreoretinal disease, endophthalmitis, bullous keratopathy was noted.CONCLUSION: Combined micro-incisional single-port transconjunctival limited PPV and PE are more effective and safer than PE alone because of less operation time and fewer complications for management of AACG.

New Approach for Limited-Angle Problems in Electron Microscope Based on Compressed Sensing

New advances within the recently rediscovered field of Compressed Sensing (CS) have opened for a great variety of new possibilities in the field of image reconstruction and more specifically in medical image reconstruction. In this work, a new approach using a CS-based algorithm is proposed and used in order to solve limited-angle problems (LAPs), like the ones that typically occur in computed tomography or electron microscope. This approach is based on a variant of the Robbins-Monro stochastic approximation procedure, developed by Egaziarian, using regularization by a spatially adaptive filter. This proposal consists on filling the gaps of missing or unobserved data with random noise and enabling a spatially adaptive denoising filter to regularize the data and reveal the underlying topology. This method was tested on different 3D transmission electron microscope datasets that presented different missing data artifacts (e.g, wedge or cone shape). The test results show a great potential for solving LAPs using the proposed technique.

Joint member angle limits of composite beams and CFT square columns

This work aims to understand the relationship between the member angle limit and the energy ratio for 24 test samples of composite beams and CFT square steel tube columns. This work also compares the formula applicability for member angle limit with the previous test result to provide the basic data for the design of composite beam-CFT column. The evaluation of the member angle limit was performed with concrete compressive strength (fC =22.16 MPa, 30.49 MPa), breadth-to-thickness ratio (B/t=25.0, 33.3, 43.5), and axial capacity ratio (N/N0=0, 0.3, 0.4, 0.5) as the main variables of the test samples. For the relationship between the member angle limit (Ru) and the energy ratio (ES/EC ), the test result shows that the energy ratio becomes lower as the axial capacity ratio and the breadth-to-thickness ratio increase. The energy ratio is lower for the Type B test sample compared with that of Types A and C. For the formula suggested by SATO, the test samples are distributed evenly for comparison between test values and the member angle limit; however, other formulas indicate a deviation. Specifically, for the comparison between R u,cal and R u (Test), Maeda's formula shows severe deviation.

Fall cone tests considering water content, cone penetration index, and plasticity angle of fine-grained soils

This paper analyzed the consistency of some parameters of soils in the literature and experimental results from fall cone test and its application to soil plasticity classification.Over 500 data from both literatures and experiments using fall cone and Casagrande methods were compiled to assess the relationships among specified water content,cone penetration index ebT,and plasticity angle eaT of finegrained soils.The results indicate that no unique correlation exists among b,liquid limit of the fall cone test(LLc)and a.The water content at 1 mm cone penetration eC0T correlates well with b,plasticity ratio eRpT(i.e.the ratio of plastic limit to liquid limit),and a.Finally,the potential of using the btan a diagram to classify soil plasticity was also discussed.

Roll angle measurement system based on triaxial magneto-resistive sensor

Aiming at large error when inertial devices measure the roll angle under high overload conditions,the article designs one kind of roll angle measurement system based on magneto-resistive sensor which calculates the roll angle by micro controller STM32.Experiment results of a triaxial turntable show that using magneto-resistive sensor to measure roll angle is feasible and of high accuracy,and it can calculate the roll angle of the conventional projectile with the error in 1°.

Investigation on the effect of beam divergence angle upon output waveform based on stimulated Brillouin scattering optical limiting

This paper investigates the effect of beam divergence angle on output waveform based on stimulated Brillouin scattering optical limiting.Output waveforms in the case of different pump divergence angles are numerically simulated,and validated in a Nd：YAG seed-injected laser system.The results indicate that a small pump divergence angle can lead to good interaction between pump and Stokes,and a platform can be easily realized in the transmitted waveform.In contrast,a peak followed by the platform appears when the divergence angle becomes large.

The Paradigm of Surgical Ellipse Dimensions: Are the Length-to-Width Ratio of 3 to 4 and a Vertex Angle of 30ºCorrect?

Background: It has been postulated that elliptical cutaneous excisions must possess a length-to-width ratio of 3 to 4 and a vertex angle of 30o or less in order to be closed primarily without creating a “dog ear”. These dimensions became axiomatic in cutaneous surgery and have been taught in the apprenticeship model for years. The present article examines the validity of that paradigm. Methods: We collected data from two sources: ellipses described in the literature (57 cases);and elliptical excisions performed at the authors’ outpatient clinic (83 cases). The surgical ellipse lengths, widths, and vertex angles were analyzed, and the data were compared to a mathematical formula used to generate a fusiform ellipse. Results: The length-to-width ratio of 3 - 4 was found to be inconsistent with the recommended vertex angle of 30o. In fact, a length-to-width ratio of 3 - 4 determines a vertex angle of 48o - 63o. A 30o vertex angle is only feasible with long length-to-width ration of about 7.5. Conclusions: The paradigm that surgical ellipses should have a vertex angle of 30o with length-to-width ratio of 3 - 4 is incorrect. Evidence from actual surgical practice and from mathematical formulation shows that either the length-to-width ratio must be larger than 3 - 4 or the vertex angle must be larger than 30 degrees.

Limitations of Lightning Rods in Preventing Direct Lightning Strikes

Since ancient times,lightning disasters have undoubtedly been an unstoppable threat to humanity.During thunderstorms,lightning often damages objects on the ground,such as buildings and structures.Since Franklin invented the lightning rod in 1752,lightning rods have been used worldwide to prevent direct lightning strikes in various fields such as high-voltage power transmission lines,outdoor chemical sites,highways,land and sea wind farms,and forest lightning fire protection.It has been proven that lightning accidents still occur frequently in places where lightning rods are installed and the protective angle method is used.In order to further study the protective effect of lightning rods and identify the shortcomings of lightning rod protection,negative lightning strikes are taken as the research object,to analyze the limitations of lightning rods in preventing direct lightning strikes from the working principle of lightning rods.

Nonlinear Optical Properties and Optical Limiting Measurements of {(1Z)-[4-(Dimethylamino)Phenyl]Methylene} 4-Nitrobenzocarboxy Hydrazone Monohydrate under CW Laser Regime

We report results from the investigation of the nonlinear refractive index and nonlinear absorption coefficient of {(1Z)-[4-(Dimethylamino)phenyl]methylene} 4-nitrobenzocarboxy hydrazone mono-hydrate (DMPM4NBCHM) solution using Z-scan technique with a continuous wave (CW) Argon ion laser. The results show that this type of organic material has a large nonlinear absorption and nonlinear refractive index at 488 nm and 514 nm. The origin of the nonlinear effects was discussed. We demonstrate that the light induced nonlinear refractive index variation, leads to limiting effect. The results indicated that DMPM4NBCHM could be promising candidates for application on nonlinear photonic devices and optical limiters.

一种多段有限角CT采样的BF-TV-ART图像重建方法

CT影像数据在临床诊断和疾病筛查复查中具有重要意义,但数据采集中使用的X射线会在人体内呈现累加现象,过量的射线辐射会增加检测者患病风险.为降低检测中的辐射剂量,CT扫描系统会采用不完全采样扫描方式,如有限角采样、稀疏角采样和多段有限角采样.多段有限角方式的采样设计可在一定程度上兼具这两者的优点,有利于高精度CT图像的重建.本文设计了一种多段有限角CT扫描模式,分析了双边滤波在图像平滑和锐化方面的特征,提出了一种基于全变分与双边滤波的CT迭代重建模型,简称为BF-TV-ART(bilateral filtering-total variation-algebraic reconstruction techniques),并进行了算法设计.数值实验中通过二维Shepp-Logan模型和管线腐蚀模型验证了BF-TV-ART模型重建精度更高,重建时间更短,且重建图像的边缘信息得到了更好的保护.数值结果表明提出的重建方法可有效地抑制数据缺失采样下重建图像中的条状伪影和滑坡伪影.

型钢混凝土T形截面剪力墙基于性能的变形限值研究

为更好地评估T形截面型钢混凝土(steel reinforced concrete,SRC)剪力墙变形性能,采用ABAQUS有限元软件对按照规范设计的324个T形截面SRC剪力墙构件的破坏形态和变形性能进行研究,根据收集的试验数据分析构件的破坏形态,提出T形截面SRC剪力墙的破坏形态划分准则;以构件的各材料应变极限值为准则来判别构件的性能状态,考虑轴压比、剪跨比、弯剪比、腹板暗柱配钢率、暗柱纵筋配筋率及箍筋暗柱特征值对构件变形性能的影响。对不同性能状态变形限值和参数进行线性回归分析,得到不同破坏类型下各性能状态位移角限值计算式;按规范ASCE 41修正各性能状态变形限值的失效概率,得到具有15%、20%、35%失效概率保证的各性能状态变形限值取值表。研究表明:剪跨比、轴压比对构件各性能状态位移角限值影响较大,暗柱腹板配钢率、纵筋配筋率及箍筋特征值对构件位移角限值影响相对较小,但能提高其延性。按规范ASCE 41修正后的位移角限值取值较为合理且有一定的安全储备。为T形截面SRC剪力墙基于性能的抗震设计与性能评估提供参考。

Development of swashplateless helicopter blade pitch control system using the limited angle direct-drive motor(LADDM)

It can be greatly beneficial to remove the swashplate of conventional helicopter, because the swashplate is usually complicated, aerodynamically resistive, and obstacle of more complex pitch control for improving performance. The present technologies for helicopter vibration reduction are usually narrow in effective range or requiring additional actuators and signal transfer links, and more effective technology is desired. Helicopter blade pitch control system, which is removed of swashplate and integrated high-frequency pitch control function for active vibration reduction, is likely the suitable solution at current technical level. Several potential implementation schemes are discussed, such as blades being directly or indirectly driven by actuators mounted in rotating frame and application of different types of actuators, especially implementation schemes of electro-mechanical actuator with or without gear reducer. It is found that swashplateless blade pitch control system based on specially designed limited angle direct-drive motor （LADDM） is a more practical implementation scheme. An experimental prototype of the finally selected implementation scheme has been designed, fabricated and tested on rotor tower. The test results show considerable feasibility of the swashplateless helicopter blade pitch control system using the LADDM.

基于桨距角控制的永磁风电机组高电压穿越控制策略

为解决传统永磁风电机组高电压穿越控制策略存在超速脱网风险问题,提出一种基于桨距角控制的高电压穿越控制策略。高电压穿越期间,首先,按照并网要求向电网提供无功支撑;其次,考虑转子转速限制,当转子转速达到参考值时启动桨距角控制,抑制转子转速上升;最后,通过仿真试验,验证了所提控制策略的有效性。基于桨距角控制的永磁风电机组高电压穿越控制策略,既能向电网提供无功支撑,又能避免超速脱网。

Landweber Iterative Methods for Angle-limited Image Reconstruction

We introduce a general iterative scheme for angle-limited image reconstruction based on Landwebet＇s method. We derive a representation formula for this scheme and consequently establish its convergence conditions. Our results suggest certain relaxation strategies for an accelerated convergence for angle-limited image reconstruction in L^2-norm comparing with alternative projection methods. The convolution-backprojection algorithm is given for this iterative process.

An Iterative Algorithm for Computed Tomography Image Reconstruction from Limited-Angle Projections

In application of tomography imaging, limited-angle problem is a quite practical and important issue.In this paper, an iterative reprojection-reconstruction(IRR) algorithm using a modified Papoulis-Gerchberg(PG)iterative scheme is developed for reconstruction from limited-angle projections which contain noise. The proposed algorithm has two iterative update processes, one is the extrapolation of unknown data, and the other is the modification of the known noisy observation data. And the algorithm introduces scaling factors to control the two processes, respectively. The convergence of the algorithm is guaranteed, and the method of choosing the scaling factors is given with energy constraints. The simulation result demonstrates our conclusions and indicates that the algorithm proposed in this paper can obviously improve the reconstruction quality.

An Iterative Algorithm for Angle-limited Three-dimensional Image Reconstruction

We establish an improved GP iterative algorithm for the extrapolation of band-limited function to fully 3-dimensional image reconstruction by the convolution-backprojection algorithm. Numerical experiments demonstrate that the image resolving power of IGP algorithm is better than that of the original GP algorithm for noisy data.

基于实际触发角响应的连续换相失败抑制方法

针对逆变侧交流故障下高压直流(line commutated converter-high voltage direct current,LCC-HVDC)输电系统易引发连续换相失败问题,该文分阶段分析了连续换相失败的产生机理。明确了当产生触发角偏差后,直流电流调节效果与实际触发角不匹配是连续换相失败的重要诱因。同时不对称故障后,负序分量通过极控、阀控两级控制系统对实际触发角造成的影响,增加连续换相失败的风险。因此提出了一种基于实际触发角响应的连续换相失败抑制方法,通过实际触发角修正整流侧电流指令值。与此同时,该方法通过陷波器降低负序电流对极控层触发角指令值的影响,通过相序解耦控制器和换相电压相位补偿降低负序电压对阀控层触发角实际值的影响。该方法能实现动态、自适应的电流指令值调整,提升恢复过程中直流电流与实际触发角的匹配度,提升直流系统抵御连续换相失败能力。在CIGRE标准测试模型和实际工程模型中,验证了理论分析的正确性和优化方法的有效性。