Moment Redistribution Effect of the Continuous Glass Fiber Reinforced Polymer-Concrete Composite Slabs Based on Static Loading Experiment

This study aimed to investigate the moment redistribution in continuous glass fiber reinforced polymer(GFRP)-concrete composite slabs caused by concrete cracking and steel bar yielding in the negative bending moment zone.An experimental bending moment redistribution test was conducted on continuous GFRP-concrete composite slabs,and a calculation method based on the conjugate beam method was proposed.The composite slabs were formed by combining GFRP profiles with a concrete layer and supported on steel beams to create two-span continuous composite slab specimens.Two methods,epoxy resin bonding,and stud connection,were used to connect the composite slabs with the steel beams.The experimental findings showed that the specimen connected with epoxy resin exhibited two moments redistribution phenomena during the loading process:concrete cracking and steel bar yielding at the internal support.In contrast,the composite slab connected with steel beams by studs exhibited only one-moment redistribution phenomenon throughout the loading process.As the concrete at the internal support cracked,the bending moment decreased in the internal support section and increased in the midspan section.When the steel bars yielded,the bending moment further decreased in the internal support section and increased in the mid-span section.Since GFRP profiles do not experience cracking,there was no significant decrease in the bending moment of the mid-span section.All test specimens experienced compressive failure of concrete at the mid-span section.Calculation results showed good agreement between the calculated and experimental values of bending moments in the mid-span section and internal support section.The proposed model can effectively predict the moment redistribution behavior of continuous GFRP-concrete composite slabs.

Complete Convergenceand Complete Moment Convergence for Weighted Sums of ANA Random Variables

In this paper,we investigate the complete convergence and complete moment conver-gence for weighted sums of arrays of rowwise asymptotically negatively associated(ANA)random variables,without assuming identical distribution.The obtained results not only extend those of An and Yuan[1]and Shen et al.[2]to the case of ANA random variables,but also partially improve them.

Sensitivity Analysis of Electromagnetic Scattering from Dielectric Targets with Polynomial Chaos Expansion and Method of Moments

In this paper,an adaptive polynomial chaos expansion method(PCE)based on the method of moments(MoM)is proposed to construct surrogate models for electromagnetic scattering and further sensitivity analysis.The MoM is applied to accurately solve the electric field integral equation(EFIE)of electromagnetic scattering from homogeneous dielectric targets.Within the bistatic radar cross section(RCS)as the research object,the adaptive PCE algorithm is devoted to selecting the appropriate order to construct the multivariate surrogate model.The corresponding sensitivity results are given by the further derivative operation,which is compared with those of the finite difference method(FDM).Several examples are provided to demonstrate the effectiveness of the proposed algorithm for sensitivity analysis of electromagnetic scattering from homogeneous dielectric targets.

Moments of inertia of triaxial nuclei in covariant density functional theory

The covariant density functional theory(CDFT)and five-dimensional collective Hamiltonian(5DCH)are used to analyze the experimental deformation parameters and moments of inertia(MoIs)of 12 triaxial nuclei as extracted by Allmond and Wood[J.M.Allmond and J.L.Wood,Phys.Lett.B 767,226(2017)].We find that the CDFT MoIs are generally smaller than the experimental values but exhibit qualitative consistency with the irrotational flow and experimental data for the relative MoIs,indicating that the intermediate axis exhibites the largest MoI.Additionally,it is found that the pairing interaction collapse could result in nuclei behaving as a rigid-body flow,as exhibited in the^(186-192)Os case.Furthermore,by incorporating enhanced CDFT MoIs(factor of f≈1.55)into the 5DCH,the experimental low-lying energy spectra and deformation parameters are reproduced successfully.Compared with both CDFT and the triaxial rotor model,the 5DCH demonstrates superior agreement with the experimental deformation parameters and low-lying energy spectra,respectively,emphasizing the importance of considering shape fluctuations.

The deterministic condition for the ground reaction force acting point on the combined knee valgus and tibial internal rotation moments in early phase of cutting maneuvers in female athletes

Background:Combined knee valgus and tibial internal rotation(VL+IR)moments have been shown to stress the anterior cruciate ligament(ACL)in several in vitro cadaveric studies.To utilize this knowledge for non-contact ACL injury prevention in sports,it is necessary to elucidate how the ground reaction force(GRF)acting point(center of pressure(CoP))in the stance foot produces combined knee VL+IR moments in risky maneuvers,such as cuttings.However,the effects of the GRF acting point on the development of the combined knee VL+IR moment in cutting are still unknown.Methods:We first established the deterministic mechanical condition that the CoP position relative to the tibial rotational axis differentiates the GRF vector’s directional probability for developing the combined knee VL+IR moment,and theoretically predicted that when the CoP is posterior to the tibial rotational axis,the GRF vector is more likely to produce the combined knee VL+IR moment than when the CoP is anterior to the tibial rotational axis.Then,we tested a stochastic aspect of our theory in a lab-controlled in vivo experiment.Fourteen females performed 60˚cutting under forefoot/rearfoot strike conditions(10 trials each).The positions of lower limb markers and GRF data were measured,and the knee moment due to GRF vector was calculated.The trials were divided into anterior-and posterior-CoP groups depending on the CoP position relative to the tibial rotational axis at each 10 ms interval from 0 to 100 ms after foot strike,and the occurrence rate of the combined knee VL+IR moment was compared between trial groups.Results:The posterior-CoP group showed significantly higher occurrence rates of the combined knee VL+IR moment(maximum of 82.8%)at every time point than those of the anterior-CoP trials,as theoretically predicted by the deterministic mechanical condition.Conclusion:The rearfoot strikes inducing the posterior CoP should be avoided to reduce the risk of non-contact ACL injury associated with the combined knee VL+IR stress.

Implementing and evaluating an automatic centroid moment tensor procedure for the Indonesia region and surrounding areas

The purpose of this research was to suggest an applicable procedure for computing the centroid moment tensor(CMT)automatically and in real time from earthquakes that occur in Indonesia and the surrounding areas.Gisola software was used to estimate the CMT solution by selecting the velocity model that best suited the local and regional geological conditions in Indonesia and the surrounding areas.The data used in this study were earthquakes with magnitudes of 5.4 to 8.0.High-quality,real-time broadband seismographic data were provided by the International Federation of Digital Seismograph Networks Web Services(FDSNWS)and the European Integrated Data Archive(EIDA)Federation in Indonesia and the surrounding areas.Furthermore,the inversion process and filter adjustment were carried out on the seismographic data to obtain good CMT solutions.The CMT solutions from Gisola provided good-quality solutions,in which all earthquake data had A-level quality(high quality,with good variant reduction).The Gisola CMT solution was justified with the Global CMT(GCMT)solution by using the Kagan angle value,with an average of approximately 11.2°.This result suggested that the CMT solution generated from Gisola was trustworthy and reliable.The Gisola CMT solution was typically available within approximately 15 minutes after an earthquake occurred.Once it met the quality requirement,it was automatically published on the internet.The catalog of local and regional earthquake records obtained through this technology holds great promise for improving the current understanding of regional seismic activity and ongoing tectonic processes.The accurate and real-time CMT solution generated by implementing the Gisola algorithm consisted of moment tensors and moment magnitudes,which provided invaluable insights into earthquakes occurring in Indonesia and the surrounding areas.

A novel method for integrating chromatographic fingerprint analytical units of Chinese materia medica:the matching frequency statistical moment method

Objective To facilitate the quality evaluation suitable for the unique characteristics of Chinese materia medica(CMM)by developing and implementing a novel approach known as the matching frequency statistical moment(MFSM)method.Methods This study established the MFSM method.To demonstrate its effectiveness,we applied this novel approach to analyze Danxi Granules(丹膝颗粒,DXG)and its constituent herbal materials.To begin with,the ultra-performance liquid chromatography(UPLC)was applied to obtain the chromatographic fingerprints of DXG and its constituent herbal materi-als.Next,the MFSM was leveraged to compress and integrate them into a new fingerprint with fewer analytical units.Then,we characterized the properties and variability of both the original and integrated fingerprints by calculating total quantum statistical moment(TQSM)parameters,information entropy and information amount,along with their relative standard deviation(RSD).Finally,we compared the TQSM parameters,information entropy and infor-mation amount,and their RSD between the traditional and novel fingerprints to validate the new analytical method.Results The chromatographic peaks of DXG and its 12 raw herbal materials were divided and integrated into peak families by the MFSM method.Before integration,the ranges of the peak number,three TQSM parameters,information entropy and information amount for each peak or peak family of UPLC fingerprints of DXG and its 12 raw herbal materials were 95.07−209.73,9390−183064μv·s,5.928−21.33 min,22.62−106.69 min^(2),4.230−6.539,and 50530−974186μv·s,respectively.After integration,the ranges of these parameters were 10.00−88.00,9390−183064μv·s,5.951−22.02 min,22.27−104.73 min^(2),2.223−5.277,and 38159−807200μv·s,respectively.Correspondingly,the RSD of all the aforementioned pa-rameters before integration were 2.12%−9.15%,6.04%−49.78%,1.15%−23.10%,3.97%−25.79%,1.49%−19.86%,and 6.64%−51.20%,respectively.However,after integration,they changed to 0.00%,6.04%−49.87%,1.73%−23.02%,3.84%−26.85%,1.17%−16.54%,and 6.40%−48.59%,respectively.The results demonstrated that in the newly integrated fingerprint,the analytical units of constituent herbal materials,information entropy and information amount were significantly reduced(P<0.05),while the TQSM parameters remained unchanged(P>0.05).Additionally,the RSD of the TQSM parameters,information entropy,and information amount didn’t show significant difference before and after integration(P>0.05),but the RSD of the number and area of the integrated analytical units significantly decreased(P<0.05).Conclusion The MFSM method could reduce the analytical units of constituent herbal mate-rials while maintain the properties and variability from their original fingerprint.Thus,it could serve as a feasible and reliable tool to reduce difficulties in analyzing multi-compo-nents within CMMs and facilitating the evaluation of their quality.

Binding Energy, Root-Mean Square Radius and Magnetic Dipole Moment of the Nucleus 6Li

In this work, we have applied the translation invariant shell model with number of quanta of excitations N=2,4,6,8and 10 to define the ground-state eigenenergies and their corresponding normalized eigenstates, the root mean-square radius, and the magnetic dipole moment of the nucleus 6Li. We have computed the necessary two-particle orbital fractional parentage coefficients for nuclei with mass number A=6and number of quanta of excitations N=10, which are not available in the literature. In addition, we have used our previous findings on the nucleon-nucleon interaction with Gaussian radial dependencies, which fits the deuteron characteristics as well as the triton binding energy, root-mean square radius and magnetic dipole moment. The numerical results obtained in this work are in excellent agreement with the corresponding experimental data and the previously published theoretical results in the literature.

Dipole moment regulation by Ni doping ultrathin Bi_(4)O_(5)Br_(2)for enhancing internal electric field toward efficient photocatalytic conversion of CO_(2)to CO

The low efficiency of photogenerated carrier separation,and the poor adsorption and activation ability of CO_(2)on the surface of photocatalyst were the key problems to limit the efficiency of photocatalytic CO_(2)reduction.Hence,maximally accelerating the immigration of photogenerated charges d increasing the number of active sites are critical points to boost the overall performance of photocatalytic CO_(2)reduction.However,it is still huge challenge.In this work,the Ni-doped ultrathin Bi_(4)O_(5)Br_(2)nanosheets,which was successfully prepared by hydrothermal and ultrasonic chemical stripping methods,exhibited efficient photocatalytic conversion of CO_(2)to CO.The results of experiments and theoretical calculations indicated that the doped Ni^(2+)significantly increased the crystal dipole moment of Bi_(4)O_(5)Br_(2)in y direction(from 0 to 0.096 e?),which enhanced the polarized electric field strength inside Bi_(4)O_(5)Br_(2),and further promoted the immigration of photogenerated carriers.Meanwhile,the ultrathin structure and doped Ni^(2+)synergistically increased the number of active sites,thereby promoting the adsorption and activation of CO_(2)molecules,as evidenced by experimental and theoretical results collectively.As result,The CO yield was as high as 26.57μmol g–1 h–1 for the prepared Ni-doped ultrathin Bi_(4)O_(5)Br_(2)nanosheets under full spectrum light irradiation,which was 9.48 times that of Bi_(4)O_(5)Br_(2).Therefore,it is of great scientific significance in this study to explore strategies to promote the separation of photogenerated carriers and enhance the adsorption and activation ability of CO_(2)on the surface.

Prediction of seismic-induced bending moment and lateral displacement in closed and open-ended pipe piles:A genetic programming approach

Ensuring the reliability of pipe pile designs under earthquake loading necessitates an accurate determination of lateral displacement and bending moment,typically achieved through complex numerical modeling to address the intricacies of soil-pile interaction.Despite recent advancements in machine learning techniques,there is a persistent need to establish data-driven models that can predict these parameters without using numerical simulations due to the difficulties in conducting correct numerical simulations and the need for constitutive modelling parameters that are not readily available.This research presents novel lateral displacement and bending moment predictive models for closed and open-ended pipe piles,employing a Genetic Programming(GP)approach.Utilizing a soil dataset extracted from existing literature,comprising 392 data points for both pile types embedded in cohesionless soil and subjected to earthquake loading,the study intentionally limited input parameters to three features to enhance model simplicity:Standard Penetration Test(SPT)corrected blow count(N60),Peak Ground Acceleration(PGA),and pile slenderness ratio(L/D).Model performance was assessed via coefficient of determination(R^(2)),Root Mean Squared Error(RMSE),and Mean Absolute Error(MAE),with R^(2) values ranging from 0.95 to 0.99 for the training set,and from 0.92 to 0.98 for the testing set,which indicate of high accuracy of prediction.Finally,the study concludes with a sensitivity analysis,evaluating the influence of each input parameter across different pile types.

板柱节点考虑弯剪相关性的受冲切承载力计算方法

对于同时受到竖向荷载和不平衡弯矩作用的板柱节点,目前已有方法大多将不平衡弯矩等效为竖向荷载,从而给出其受冲切承载力计算方法。但该方法所涉及的不平衡弯矩比例系数的计算还存在较大争议,且没有考虑竖向荷载与不平衡弯矩耦合的影响。因此,本文首先通过推导给出仅有竖向荷载作用的板柱节点受冲切承载力计算公式和仅有不平衡弯矩作用的板柱节点受弯承载力计算公式,并与试验结果进行对比,验证了所提公式的合理性。然后基于板柱节点在竖向荷载和不平衡弯矩共同作用下的试验结果,拟合得到板柱节点考虑弯剪相关性的受冲切承载力计算公式。最后对所提计算方法与不同规范计算方法进行对比,结果表明本文计算方法能够更加准确地预测板柱节点受冲切承载力。

“大学物理实验”军事特色实验项目设计——以弹头转动惯量测量实验为例

面向高素质专业化新型军事人才培养的使命任务,国防科技大学物理实验课程组建设了系列军事特色实验项目.以弹头转动惯量测量为例,介绍了军事特色实验项目的教学设计,该项目在传统转动惯量测量实验的基础上进行改造,并辅以炮弹专用型转动惯量测试仪,突出实验项目的军事特色.教学设计围绕实验概述—实验原理—实验演示与讨论—实验内容与要求—自主实验—研讨与拓展等环节展开,在教学过程中通过仪器操作与讨论、课堂研讨等互动环节,提高学生对仪器以及实验的理解,提升整体教学质量.

缓冲层-桩板墙组合支护膨胀土边坡现场试验研究

为研究缓冲层对桩板墙结构支护膨胀土边坡的力学与变形特性的影响,以湖北当阳某铁路膨胀土边坡的桩板墙-缓冲层[包括聚苯乙烯泡沫(EPS)缓冲层和袋装砂石缓冲层2种]组合支护结构为对象,通过实施现场试验,分析气候环境作用下该组合支护结构中的土体湿度、桩身位移、板后土压力及桩与板弯矩的变化规律,揭示不同缓冲层情况下膨胀土边坡-缓冲层-桩板墙组合支护结构的相互作用及其协同的力学与变形关系.结果表明:相比于袋装砂石缓冲层,EPS缓冲层能够更有效地降低侧向膨胀压力,在本试验中测得最大消减率为69%.同时,EPS缓冲层能够及时响应气候环境引起的膨胀土胀缩变化,继而动态改善板后侧向总土压力的分布,而袋装砂石缓冲层对气候环境的响应能力明显相对较弱.膨胀土边坡-EPS缓冲层-桩板墙结构三者之间能够形成稳定的协调相互作用,进而降低膨胀土膨胀特性对桩间板弯矩的影响.

Fisher准则函数在机械刀具切削磨损检测中的应用

在高精度机床道具切削磨损无接触图像检测中,磨损区域边缘特征容易发生混淆,区分其像素边缘区域成为一个难点。Fisher判别函数可以用于特征提取,即通过选择最具有区分力的特征来改善分类性能。针对这一特点,提出基于Fisher准则函数的机械刀具切削磨损检测方法。首先,对采集到的机械刀具切削磨损图像实施图像增强处理,利用实施修正线性拉伸操作解决光照不均匀问题,凸出刀具磨损区域的细节特征并提高图像质量;其次,利用基于Fisher准则函数的图像阈值分割方法,将刀体区域和其工作背景区域分割出来,使刀具磨损区域更加清晰,提高磨损区域的可识别性;最后,通过Roberts边缘检测确定刀具切削磨损边缘,并使用Zernike正交矩确定刀具切削磨损边缘的精确值以获取磨损区域,提取其磨损信息实现机械刀具切削磨损的检测。实验结果表明:所提方法具有较高图像处理能力以及磨损检测精度。

瘦身翻译之理念与表现——以Moment in Peking的汉译为例

瘦身翻译是由丰厚翻译逆向引发的一个新概念,指译者在翻译过程中将某些信息进行删减或简化的行为理念。原文读者与译文读者之间的语境视差是瘦身翻译存在的根据,即原文读者的语境视野小于译文读者的语境视野,丰厚翻译则相反。瘦身翻译尤其适用于用A语言书写B语言文化的事,然后再从A语言转换成B语言的文本。本文以林语堂Moment in Peking的两个汉译本为例,探讨其中的瘦身翻译现象。研究发现,张振玉的译本比郁飞的译本在"瘦身"处理上更为自然得体,信息冗余度明显低于郁译。瘦身翻译具有理论与实践双重意义,有望成为翻译研究的新术语。

物理学名词moment中文译名之创制及变迁

moment是物理学中一个基本概念。来华传教士与中国学者合作创译的中文译名混乱且不统一。20世纪初,日译名词"能率"被广泛采用,这一译名可能源于《重学浅说》。伍光建最先在《力学》(1904)中使用"矩"译名,但在当时影响不大。1930年代,"能率"被"矩"替代,当时逐渐形成的科学共同体和后来成立的国立编译馆在此过程中起了关键作用。

Ultimate negative bending-moment capacity of outer-plated steel-concrete continuous composite beams

Static load tests and bearing capacity analyses are carried out for two outer-plated steel-concrete continuous composite beams. The load-deflection curve and the load-strain curve of specimens are obtained and analyzed. The test results indicate that effective cooperation can be achieved by the shearresistant connection between the reinforcement in the negative moment area and the outer-plated steel beam, and the overall working performance of the composite beams is favorable. At the load-bearing limiting state, the plastic strain on the maximum negative and positive moment section becomes fully developed so as to form relatively ideal plastic hinges. With the increase in the reinforcement ratio, the moment-carrying capacity of the composite beams improves significantly, but the ductility of the beams and the rotation ability of the plastic hinges decrease. The formulae for calculating the limit bending capacity in the negative moment area of outer-plated steel-concrete composite beams are proposed based on the test data. The calculated results agree well with the test results.

从Moment in Peking看林语堂对中国文化特色词的补偿翻译

Moment in Peking是林语堂创作的一部英文小说,其中有许多中国文化特色词汇。作者对这些词汇的处理有多种策略,文化补偿就是很重要的一种。通过简单或详细补偿翻译,作者使英文读者能够很好地理解原文,同时达到传播中国文化的目的。

林语堂先生英文传意写作方法研究——从Moment in Peking说起

从传播学角度看,Moment in Peking是一种传意写作。其特点在于作者明确的写作意图与强烈的受众意识。作者林语堂先生了解西方受众的期待域并预知作品所容涵的汉文化信息对于西方受众的理解所存在的障碍:读者对英语语言媒介中大量的汉语拼音词汇意义的认知障碍、英语读者对汉译词汇的文化伴随意义的认知障碍、英语读者对整体语境的感知障碍以及英语读者、英语语言媒介与汉文化思维的矛盾。对此,他采取以受众思维方式构筑文本叙事逻辑、以外显式语言信息构筑原语文化语境、以连接式立体文本克服读者对原语文化词汇认知障碍等有效的写作方法。这种传意写作方法对于我们今天民族文化的传播而言仍不失其典范与借鉴意义。

钢管混凝土格构柱-组合箱梁节点弯矩-转角曲线计算方法

为研究钢管混凝土格构柱-组合箱梁节点的弯矩-转角关系,提出了基于极限弯矩、初始转动刚度的四折线弯矩-转角模型。对节点进行了低周往复荷载试验,分析试验结果,得到了三种节点连接件的滞回曲线、骨架曲线以及弯矩-转角曲线。基于钢结构设计标准,提出了适用于钢管混凝土格构柱-组合箱梁节点极限弯矩计算方法;基于组件法建立了节点的初始转动刚度计算模型,分别计算得到节点的极限弯矩与初始转动刚度值,并与试验值进行了对比,误差较小,吻合良好。基于极限弯矩、初始转动刚度建立了钢管混凝土格构柱-组合箱梁节点四折线弯矩-转角模型,对比验证了模型的正确性及适用性。该研究建立的四折线模型简单、精确且表达直观,可为钢管混凝土格构柱-组合箱梁节点结构设计和分析提供参考。