Prediction of the Mooring Force of a 2-D Floating Oil Storage Tank

A Constrained Interpolation Profile （CIP）-based model is developed to predict the mooring force of a two-dimensional floating oil storage tank under wave conditions, which is validated against to a newly performed experiment. In the experiment, a box-shaped floating oil storage apparatus is used. Computations are performed by an improved CIP-based Cartesian grid model, in which the THINC/SW scheme （THINC： tangent of hyperbola for interface capturing; SW： Slope Weighting）, is used for interface capturing. A multiphase flow solver is adopted to treat the water-air-body interactions. The Immersed Boundary Method （IBM） is implemented to treat the body surface. Main attention is paid to the sum force of mooring line and velocity field around the body. It is found that the sum force of the mooring line increases with increasing wave amplitude. The body suffers from water wave impact and large body motions occur near the free surface. The vortex occurs near the sharp edge, i.e., the sharp bottom comers of the float- ing oil storage tank and the vortex shedding can be captured by the present numerical model. The present model could be further improved by including turbulence model which is currently under development. Comparison between the computational mooring forces and the measured mooring forces is presented with a reasonable agreement. The developed numerical model can predict the mooring line forces very well.

ON FORCE-FREE MAGNETIC FIELDS AND BELTRAMI FLOWS

Solenoidal vector fields, which satisfy the condition that the field vector everywhere parallels to its curl, have complex topological structures, and usually show chaotic behaviors. In this paper, analytical solutions for vector fields with constant proportional factor in three basic coordinate systems are presented and it is pointed out that a Beltrami flow can sustain a steady force-free magnetic field in a perfectly conducting fluid, provided the magnetic field is parallel to the velocity everywhere.

Analysis of Temperature Rise Characteristics and Fatigue Damage Degree of ACSR Broken Strand

In this paper,the research on ACSR temperature of broken strand and fatigue damage after broken strand is carried out.Conduct modeling and Analysis on the conductor through AnsoftMaxwell software.The distribution of magnetic force lines in the cross section of the conductor after strand breaking and the temperature change law of the conductor with the number of broken strands are analyzed.A model based on electromagnetic theory is established to analyze the distribution of magnetic lines of force in the cross section of the conductor after strand breaking and the temperature variation law of the conductor with the number of broken strands.The finite element analysis results show that with the increase in the number of broken strands,the cross-sectional area of the conductor decreases,the magnetic line of force of the inner conductor at the broken strand becomes denser and denser,and the electromagnetic loss of the conductor becomes larger and larger.Therefore,the temperature of the conductor at the broken strand becomes higher and higher.Then,the current carrying experiment of conductor is carried out for LGJ-240/30 conductor.It is found that the temperature rise at the junction of inner and outer layers at the broken strand is particularly obvious,and the temperature of inner aluminumconductor at the broken strand also increases with the increase of broken strand.According to the analysis of experimental data,with the increase of broken strands,the antivibration ability and service life of the conductor decrease.At the same time,under certain conditions of broken strand,the fatigue life of conductor increases with the increase of temperature.

AN ANALYSIS OF 2D PIEZOELECTRIC HALFPLANE WITH A FIXED CONDUCTOR SURFACE

Solutions to a piezoelectric half-plane with a fixed conductorsurface electrode subjected to two generalized singularities (linedislocation and/or lien force and free charge) are presented.Coublomb forces acting on the singularities due to the boundarypolarization changes of medium and the induction charg- es ofconductor electrode are analyzed in detail. The interaction betweenthe two singularities is also analyzed numerically. Results show thatCoulomb forces will become important as the free change approachesthe boundary or two singularities move closely.

Dynamic Analysis for the Global Performance of An SPM-Feeder-Cage System Under Waves and Currents

In the present study, the dynamic response of a coupled SPM-feeder-cage system under irregular waves and shear currents is analyzed. A numerical model is developed by using the commercial software Orca Flex. Hydrodynamics coefficients of the vessel are calculated by using a 3D diffraction/radiation panel program. First- and second-order wave forces are included in the calculations. Morison equation is used to compute the drag force on line elements representing the net. Drag coefficients are determined at every time step in the simulation considering the relative normal velocity between the structural elements and the fluid flow. The dynamic response of the coupled system is analyzed for various environments and net materials. The results of the study show the effects of solidity ratio of the net and vertical positions of the cage on the overall dynamic response of the system, confirming the viability of this type of configuration for future development of offshore aquaculture in deep waters.