A New Class of Biased Linear Estimators in Deficient-rank Linear Models

In this paper, we define a new class of biased linear estimators of the vector of unknown parameters in the deficient_rank linear model based on the spectral decomposition expression of the best linear minimun bias estimator. Some important properties are discussed. By appropriate choices of bias parameters, we construct many interested and useful biased linear estimators, which are the extension of ordinary biased linear estimators in the full_rank linear model to the deficient_rank linear model. At last, we give a numerical example in geodetic adjustment.

ADMISSIBILITY OF LINEAR ESTIMATORS IN A GROWTH CURVE MODEL SUBJECT TO AN INCOMPLETE ELLIPSOIDAL RESTRICTION

This article considers the admissibility of the linear estimators for the regression coefficients in the growth curve model subject to an incomplete ellipsoidal restriction. The necessary and sufficient conditions for linear estimators to be admissible in classes of the homogeneous and non-homogeneous linear estimators, respectively, are obtained under the quadratic loss function. They are generalizations of some existing results in literature.

De-correlated unbiased sequential filtering based on best unbiased linear estimation for target tracking in Doppler radar

In target tracking applications,the Doppler measurement contains information of the target range rate,which has the potential capability to improve the tracking performance.However,the nonlinear degree between the measurement and the target state increases with the introduction of the Doppler measurement.Therefore,target tracking in the Doppler radar is a nonlinear filtering problem.In order to handle this problem,the Kalman filter form of best linear unbiased estimation(BLUE)with position measurements is proposed,which is combined with the sequential filtering algorithm to handle the Doppler measurement further,where the statistic characteristic of the converted measurement error is calculated based on the predicted information in the sequential filter.Moreover,the algorithm is extended to the maneuvering target tracking case,where the interacting multiple model(IMM)algorithm is used as the basic framework and the model probabilities are updated according to the BLUE position filter and the sequential filter,and the final estimation is a weighted sum of the outputs from the sequential filters and the model probabilities.Simulation results show that compared with existing approaches,the proposed algorithm can realize target tracking with preferable tracking precision and the extended method can achieve effective maneuvering target tracking.

Linear Track Estimation Using Double Pulse Sources for Near-Field Underwater Moving Target

The double pulse sources （DPS） method is presented for linear track estimation in this work. In the field of noise identification of underwater moving target, the Doppler will distort the frequency and amplitude of the radiated noise. To eliminate this, the track estimation is necessary. In the DPS method, we first estimate bearings of two sinusoidal pulse sources installed in the moving target through baseline positioning method. Meanwhile, the emitted and recorded time of each pulse are also acquired. Then the linear track parameters will be achieved based on the geometry pattern with the help of double sources spacing. The simulated results confirm that the DPS improves the performance of the previous double source spacing method. The simulated experiments were carried out using a moving battery car to further evaluate its performance. When the target is 40-60m away, the experiment results show that biases of track azimuth and abeam distance of DPS are under 0.6° and 3.4m, respectively. And the average deviation of estimated velocity is around 0.25m/s.

Calculation of Significant Wave Height Using the Linear Mean Square Estimation Method

Significant wave height is an important criterion in designing coastal and offshore structures.Based on the orthogonality principle, the linear mean square estimation method is applied to calculate significant wave height in this paper.Twenty-eight-year time series of wave data collected from three ocean buoys near San Francisco along the California coast are analyzed.It is proved theoretically that the computation error will be reduced by using as many measured data as possible for the calculation of significant wave height.Measured significant wave height at one buoy location is compared with the calculated value based on the data from two other adjacent buoys.The results indicate that the linear mean square estimation method can be well applied to the calculation and prediction of significant wave height in coastal regions.

Application of Linear Mean-Square Estimation in Ocean Engineering

The attempt to obtain long-term observed data around some sea areas we concern is usually very hard or even impossible in practical offshore and ocean engineering situations. In this paper, by means of linear mean-square estimation method, a new way to extend short-term data to long-term ones is developed. The long-term data about concerning sea areas can be constructed via a series of long-term data obtained from neighbor oceanographic stations, through relevance analysis of different data series. It is effective to cover the insufficiency of time series prediction method＇s overdependence upon the length of data series, as well as the limitation of variable numbers adopted in multiple linear regression model. The storm surge data collected from three oceanographic stations located in Shandong Peninsula are taken as examples to analyze the number-selection effect of reference oceanographic stations（adjacent to the concerning sea area） and the correlation coefficients between sea sites which are selected for reference and for engineering projects construction respectively. By comparing the N-year return-period values which are calculated from observed raw data and processed data which are extended from finite data series by means of the linear mean-square estimation method, one can draw a conclusion that this method can give considerably good estimation in practical ocean engineering, in spite of different extreme value distributions about raw and processed data.

Testing Linearity of Nonparametric Component in Partially Linear Model

In this paper, we propose the test statistic to check whether the nonparametric function in partially linear models is linear or not. We estimate the nonparametric function in alternative by using the local linear method, and then estimate the parameters by the two stage method. The test statistic under the null hypothesis is calculated, and it is shown to be asymptotically normal.

A LARGE SAMPLE ESTIMATE IN MEDIAN LINEAR REGRESSION MODEL Ⅰ: NONTRUNCATED CASE

This paper uses a grouping-adjusting procedure to the data from a median linear regression model, and estimtes the regression coefficients by the method of weighted least squares. This method simplifies computation and in the meantime, preserves the same asymptotic normal distribution for the estimator, as in the ordinary minimum L_1-norm estimates.

Krein space approach to robust H_∞ filtering for linear uncertain systems

A novel Krein space approach to robust H∞ filtering for linear uncertain systems is developed. The parameter uncertainty, entering into both states and measurement equations, satisfies an energy-type constraint. Then a Krein space approach is used to tackle the robust H∞ filtering problem. To this end, a new Krein space formal system is designed according to the original sum quadratic constraint （SQC） without introducing any nonzero factors into it and, consequently, the estimate recursion is obtained through the filter gain in Krein space. Finally, a numerical example is given to demonstrate the effectiveness of the proposed approach.

ALL ADMISSIBLE LINEAR ESTIMATORS UNDER MATRIX LOSS IN MULTIVARIATE MODEL

Under maids loss, tall paper dicusses the admissibility of homgeneous or nonhomgeneous linear estimators of regresaion coefficient of multivarate linear model in some common classes of estimators, the necessary and sufficient conditions are obtained.The results indicate that the admissibility of linear estimetors in multiate linear model is different from the admiedbility of linear estimators in Gauss-Markoff model.

Parametric estimation for the simple linear regression model under moving extremes ranked set sampling design

Cost effective sampling design is a major concern in some experiments especially when the measurement of the characteristic of interest is costly or painful or time consuming.Ranked set sampling(RSS)was first proposed by McIntyre[1952.A method for unbiased selective sampling,using ranked sets.Australian Journal of Agricultural Research 3,385-390]as an effective way to estimate the pasture mean.In the current paper,a modification of ranked set sampling called moving extremes ranked set sampling(MERSS)is considered for the best linear unbiased estimators(BLUEs)for the simple linear regression model.The BLUEs for this model under MERSS are derived.The BLUEs under MERSS are shown to be markedly more efficient for normal data when compared with the BLUEs under simple random sampling.

Admissibility of Linear Estimators in the Growth Curve Model with Respect to Inequality Restriction

For the growth curve model with respect to inequality restriction： Y = XBZ ＋ε,ε（0, σ2V I）, trNB ≥0, this paper gives some necessary and sufficient conditions for the linear estimator of KBL to be admissible in the class of homogeneous linear estimators LH and nonhomogeneous linear estimators LI, respectively, under the quadratic loss function tr（d（Y） - KBL）＇（d（Y） - KBL）.

Testing Equality of Nonparametric Functions in Two Partially Linear Models

We propose the test statistic to check whether the nonpararnetric functions in two partially linear models are equality or not in this paper. We estimate the nonparametric function both in null hypothesis and the alternative by the local linear method, where we ignore the parametric components, and then estimate the parameters by the two stage method. The test statistic is derived, and it is shown to be asymptotically normal under the null hypothesis.

THE COMPRESSION LS ESTIMATE OF REGRESSION COEFFICIENT IN MULTIVARIATE LINEAR MODEL

In this paper, compression LS estimate (k) of the regression coefficient B isconsidered when the design matrix present ill-condition in multivariate linear model.The MSE (mean square error)of the estimate(k)=Vec( (k))is less than theMSE of LS estimate β￣* of the regression coefficient β= Vec(B) by choosing the pa-rameter k. Admissibility , numerical stability and relative efficiency of (k)are proved. The method of determining k value for practical use is also suggested

Estimation of a Linear Model in Terms of Intra-Class Correlations of the Residual Error and the Regressors

Objectives: The objective is to analyze the interaction of the correlation structure and values of the regressor variables in the estimation of a linear model when there is a constant, possibly negative, intra-class correlation of residual errors and the group sizes are equal. Specifically: 1) How does the variance of the generalized least squares (GLS) estimator (GLSE) depend on the regressor values? 2) What is the bias in estimated variances when ordinary least squares (OLS) estimator is used? 3) In what cases are OLS and GLS equivalent. 4) How can the best linear unbiased estimator (BLUE) be constructed when the covariance matrix is singular? The purpose is to make general matrix results understandable. Results: The effects of the regressor values can be expressed in terms of the intra-class correlations of the regressors. If the intra-class correlation of residuals is large, then it is beneficial to have small intra-class correlations of the regressors, and vice versa. The algebraic presentation of GLS shows how the GLSE gives different weight to the between-group effects and the within-group effects, in what cases OLSE is equal to GLSE, and how BLUE can be constructed when the residual covariance matrix is singular. Different situations arise when the intra-class correlations of the regressors get their extreme values or intermediate values. The derivations lead to BLUE combining OLS and GLS weighting in an estimator, which can be obtained also using general matrix theory. It is indicated how the analysis can be generalized to non-equal group sizes. The analysis gives insight to models where between-group effects and within-group effects are used as separate regressors.

A new relative efficiency in parameter estimation for linear model

A new relative efficiency of parameter estimation for generalized Gauss-Markov linear model was proposed. Its lower bound was also derived. Its properties were explored in comparison with three currently very popular relative efficiencies. The new relative efficiency not only reflects sensitively the error and loss caused by the substitution of the least square estimator for the best linear unbiased estimator, but also overcomes the disadvantage of weak dependence on the design matrix.

Asymptotic Confidence Bands for Copulas Based on the Local Linear Kernel Estimator

In this paper, we establish asymptotically optimal simultaneous confidence bands for the copula function based on the local linear kernel estimator proposed by Chen and Huang [1]. For this, we prove under smoothness conditions on the derivatives of the copula a uniform in bandwidth law of the iterated logarithm for the maximal deviation of this estimator from its expectation. We also show that the bias term converges uniformly to zero with a precise rate. The performance of these bands is illustrated by a simulation study. An application based on pseudo-panel data is also provided for modeling the dependence structure of Senegalese households’ expense data in 2001 and 2006.

Local Hybrid Linear State Estimation for Electric Power Systems Using Stream Processing

The increasing penetration of renewable energy resources with highly fluctuating outputs has placed increasing concern on the accuracy and timeliness of electric power system state estimation(SE).Meanwhile,we note that only a fraction of system states fluctuate at the millisecond level and require to be updated.As such,refreshing only those states with significant variation would enhance the computational efficiency of SE and make fast-continuous update of states possible.However,this is difficult to achieve with conventional SE methods,which generally refresh states of the entire system every 4–5 s.In this context,we propose a local hybrid linear SE framework using stream processing,in which synchronized measurements received from phasor measurement units(PMUs),and trigger/timingmode measurements received from remote terminal units(RTUs)are used to update the associated local states.Moreover,the measurement update process efficiency and timeliness are enhanced by proposing a trigger measurement-based fast dynamic partitioning algorithm for determining the areas of the system with states requiring recalculation.In particular,non-iterative hybrid linear formulations with both RTUs and PMUs are employed to solve the local SE problem.The timeliness,accuracy,and computational efficiency of the proposed method are demonstrated by extensive simulations based on IEEE 118-,300-,and 2383-bus systems.

Parameter Estimation of Time-Varying ARMA Model

The auto-regressive moving-average (ARMA) model with time-varying parameters is analyzed. The time-varying parameters are assumed to be a linear combination of a set of basis time-varying functions, and the feedback linear estimation algorithm is used to estimate the time-varying parameters of the ARMA model. This algorithm includes 2 linear least squares estimations and a linear filter. The influence of the order of basis time-(varying) functions on parameters estimation is analyzed. The method has the advantage of simple, saving computation time and storage space. Theoretical analysis and experimental results show the validity of this method.

Log-logistic parameters estimation using moving extremes ranked set sampling design

In statistical parameter estimation problems,how well the parameters are estimated largely depends on the sampling design used.In the current paper,a modification of ranked set sampling(RSS)called moving extremes RSS(MERSS)is considered for the estimation of the scale and shape parameters for the log-logistic distribution.Several traditional estimators and ad hoc estimators will be studied under MERSS.The estimators under MERSS are compared to the corresponding ones under SRS.The simulation results show that the estimators under MERSS are significantly more efficient than the ones under SRS.