Two new A-D-A porphyrin derivatives,denoted as XLP-I and XLP-II,were prepared through extending theπ-conjugation of thienothiophene-porphyrin center with phenylethynyl bridges and electron-deficient ethylrhodanine te...Two new A-D-A porphyrin derivatives,denoted as XLP-I and XLP-II,were prepared through extending theπ-conjugation of thienothiophene-porphyrin center with phenylethynyl bridges and electron-deficient ethylrhodanine terminal units,and varying the structures of alkyl chain(linear vs branched)on peripheral thienothiophene substitutions of porphyrin rings.Both molecules show strong absorption in UV–visible–near-infrared region,good thermal stability,suitable energy levels,and ordered molecular packing in solid state.In organic solar cells,PC71BM was used as electron acceptor,and porphyrin small molecules were used as electron donors.The device based on XLP-I exhibits a power conversion efficiency(PCE)of 8.30%,an open circuit voltage(Voc)of 0.894 eV,and a fill factor(FF)of 62.1%.In contrast,the device based on XLP-II presents an inferior performance with a PCE of 3.14%,a Voc of 0.847 eV,and a FF of 49.3%.The better performance of XLP-I based device is mainly attributed to its optimized film morphology,excellent absorption,and well-balanced charge transport properties.展开更多
The isothermal and non-isothermal crystallization kinetics of LCBPP and linear-iPP was investigated by optical microscopy and differential scanning calorimetry (DSC). The optical microscopy results in the isothermal c...The isothermal and non-isothermal crystallization kinetics of LCBPP and linear-iPP was investigated by optical microscopy and differential scanning calorimetry (DSC). The optical microscopy results in the isothermal crystallization process show that the crystals of LCBPP grow slower than the crystals of the linear-iPP. This originates from the low chain mobility, or in other words, the lower chain diffusion rate of LCBPP due to the existence of long side chains. The DSC results in the isothermal crystallization process show that the LCBPP exhibits, however, a higher overall crystallization rate with respect to the linear-iPP. This is related to the higher nucleation ability of LCBPP since the isothermal crystallization process of both LCBPP and linear-iPP are nucleation-dominated. Avrami analysis indicates that the nucleation nature and crystal growth manner of LCBPP and linear-iPP are about the same. The analy- ses of the non-isothermal crystallization processes indicate an increment in crystallization rate with increasing cooling rate. But at any cooling rate, the linear-iPP crystallizes more quickly than the LCBPP. This implies that the non-isothermal crystallization processes of LCBPP and linear-iPP are diffu- sion-dominated, in which the lower chain diffusion rate of LCBPP results in the slower crystallization of it.展开更多
In order to promote development of linear/branched block polyethylenes based on new catalytic systems,we synthesized a novel a.dimine nickel(Ⅱ)complex with isopropyl substituents on ortho-N-aryl and hydroxymethyl phe...In order to promote development of linear/branched block polyethylenes based on new catalytic systems,we synthesized a novel a.dimine nickel(Ⅱ)complex with isopropyl substituents on ortho-N-aryl and hydroxymethyl phenyl substituents on para-Naryl structures.The activity of a-dimine nickl(Ⅱ)catalyst was 3.02x10^(6)g-mol_(ni)^(-1)·h^(-1) at 70℃,and resultant polyethylene possessed 135/1000C branches.The linear/branched block polyethylenes were synthesized from ethylene polymerization catalyzed by the a-dimine nicke(Ⅱ)complex/bis(phenoxy-imine)zirconium in the presence of diethyI zinc.With the addition of ZnEtz(from 0 to 400),the melting peak of resultant polyethylene changed from a single melting peak to bimodal melting peaks.The molecular weights of resultant polyethylene ranging from 26.8 kg/mol to 17.1 kg/mol and PDI values varying gradually from 24.4 to 15.2 were obtained vla adjusting ZnEt;equiv.and molar ratio of two catalysts.In addition,the branching degree of the polyethylene increased from 13/1000C to 56/1000 with the increase of the proportion of a dimine nickel(Ⅱ)catalyst.Using this binary catalyst system,the reaction temperature of chain shutting polymerization can be carried out at 70℃,which is more conducive to industrial application.展开更多
基金the national key R&D program for international collaboration(No.2021YFE0191500)the National Natural Science Foundation of China(No.51473053)+3 种基金the Natural Science Foundation of Hunan Province(No.2019JJ50603)the Peacock Team Project funding from Shenzhen Science and Technology Innovation Committee(No.KQTD2015033110182370)the Fundamental Research Project funding from Shenzhen Science and Technology Innovation Committee(No.JCYJ 20190809150213448).X.Zhu thanks the financial support from Hong Kong Research Grants Council(HKBU 12304320).
文摘Two new A-D-A porphyrin derivatives,denoted as XLP-I and XLP-II,were prepared through extending theπ-conjugation of thienothiophene-porphyrin center with phenylethynyl bridges and electron-deficient ethylrhodanine terminal units,and varying the structures of alkyl chain(linear vs branched)on peripheral thienothiophene substitutions of porphyrin rings.Both molecules show strong absorption in UV–visible–near-infrared region,good thermal stability,suitable energy levels,and ordered molecular packing in solid state.In organic solar cells,PC71BM was used as electron acceptor,and porphyrin small molecules were used as electron donors.The device based on XLP-I exhibits a power conversion efficiency(PCE)of 8.30%,an open circuit voltage(Voc)of 0.894 eV,and a fill factor(FF)of 62.1%.In contrast,the device based on XLP-II presents an inferior performance with a PCE of 3.14%,a Voc of 0.847 eV,and a FF of 49.3%.The better performance of XLP-I based device is mainly attributed to its optimized film morphology,excellent absorption,and well-balanced charge transport properties.
基金the Outstanding Youth Fund and the National Natural Science Founda-tion of China (Grant Nos. 50521302, 20574079 and 20423003)
文摘The isothermal and non-isothermal crystallization kinetics of LCBPP and linear-iPP was investigated by optical microscopy and differential scanning calorimetry (DSC). The optical microscopy results in the isothermal crystallization process show that the crystals of LCBPP grow slower than the crystals of the linear-iPP. This originates from the low chain mobility, or in other words, the lower chain diffusion rate of LCBPP due to the existence of long side chains. The DSC results in the isothermal crystallization process show that the LCBPP exhibits, however, a higher overall crystallization rate with respect to the linear-iPP. This is related to the higher nucleation ability of LCBPP since the isothermal crystallization process of both LCBPP and linear-iPP are nucleation-dominated. Avrami analysis indicates that the nucleation nature and crystal growth manner of LCBPP and linear-iPP are about the same. The analy- ses of the non-isothermal crystallization processes indicate an increment in crystallization rate with increasing cooling rate. But at any cooling rate, the linear-iPP crystallizes more quickly than the LCBPP. This implies that the non-isothermal crystallization processes of LCBPP and linear-iPP are diffu- sion-dominated, in which the lower chain diffusion rate of LCBPP results in the slower crystallization of it.
基金by the National Natural Science Foundation of China(Nos.21004017 and 21004043)the Natural Science Foundation of Hebei Provinee(No.B2015202049).
文摘In order to promote development of linear/branched block polyethylenes based on new catalytic systems,we synthesized a novel a.dimine nickel(Ⅱ)complex with isopropyl substituents on ortho-N-aryl and hydroxymethyl phenyl substituents on para-Naryl structures.The activity of a-dimine nickl(Ⅱ)catalyst was 3.02x10^(6)g-mol_(ni)^(-1)·h^(-1) at 70℃,and resultant polyethylene possessed 135/1000C branches.The linear/branched block polyethylenes were synthesized from ethylene polymerization catalyzed by the a-dimine nicke(Ⅱ)complex/bis(phenoxy-imine)zirconium in the presence of diethyI zinc.With the addition of ZnEtz(from 0 to 400),the melting peak of resultant polyethylene changed from a single melting peak to bimodal melting peaks.The molecular weights of resultant polyethylene ranging from 26.8 kg/mol to 17.1 kg/mol and PDI values varying gradually from 24.4 to 15.2 were obtained vla adjusting ZnEt;equiv.and molar ratio of two catalysts.In addition,the branching degree of the polyethylene increased from 13/1000C to 56/1000 with the increase of the proportion of a dimine nickel(Ⅱ)catalyst.Using this binary catalyst system,the reaction temperature of chain shutting polymerization can be carried out at 70℃,which is more conducive to industrial application.
基金Supported by the National Natural Science Foundation of China(10671057)Natural Science Foundation of Henan Institute of Science and Technology(06054 ,06055)
