Electron paramagnetic resonance study of amphiphiles partitioning behavior in desiccation-tolerant moss during dehydration

Desiccation tolerance is a crucial characteristic for desert moss surviving in arid regions. Desiccation procedure always induces amphiphiles transferring from the polar cytoplasm into lipid bodies. The behavior of amphiphiles transferring can contribute to the enhancement of desiccation tolerance and the reduction of plasma membrane integrity simultaneously. The effects of amphiphiles partitioning into the lipid phase during water loss has been studied for pollen and seeds using electron paramagnetic resonance （EPR） spectroscopy. However, desiccation-tolerant high plants occur among mosses, several angiosperms and higher plants seeds or pollens. They have different strategies for survival in dehydration and rehydration. A desiccation-tolerant moss Tortula desertorurn was used to investigate the behaviors of amphiphilic molecules during drying by spin label technology. There are small amount of amphiphilic probes partitioning into membrane during moss leaves dehydration, comparing with that in higher plants. Cytoplasm viscosity changed from 1.14 into glass state only dehydration less than 60 min. Moss leaves lost plasma membrane integrity slightly,from 0.115 to 0.237, occurred simultaneously with amphiphiles partition. The results showed the more advantages of mosses than higher plants in adapting fast dehydration. We propose that EPR spin label is feasible for studying the amphiphiles partitioning mechanisms in membrane protection and damage for desiccation-tolerant mosses.

Molecular Recognition Based on Hydrogen-bonding in the Coliposomes of Phosphatidylcholine and Amphiphiles Using Nucleobases

A functional amphiphile, N^6 -myristoyl-9-[ 8-（ 1-trimethylamino） octyl ] adenine bromide （MTOAB）, was used to form coliposomes of phosphatidyleholine（PC）, PC/thymine, and PC/TOTB using sonication . The morphologies of the coliposomes were characterized using TEM （transmission electron microscopy）. The UV-Vis spectroscopic behavior of PC/MTOAB/thymine （molar ratio = 5： 1： 1 ） and PC/MTOAB/TOTB （molar ratio = 5： 1： 1 ） of coliposomal solutions showed that as a result of base pairing, absorption intensity showed a decrease at 263 nm with increase of time. The decrease of absorption intensity is ascribed to the hypochromic effect, which is because of the formation of hydrogen bonds between adenine and thymine in the coliposomes. The same effect was also observed for the mixture of aqueous PC/MTOAB liposomes and PC/TOTB liposomes after fusion, whereas the nocomplementary coliposomcs formed from PC/MTOAB and PC/TOTB did not show these spectroscopic changes. The molecular recognition through hydrogen interactions between adenine and thymine is very slow because of the possible occurrence of molecular lateral diffusion and exchange of amphiphile before recognition progresses in coliposomes. These results provide useful information for the design of supramolecular devices such as vesicles and liposomes,which can be used to mimic primitive recognition processes observed in biological systems.

Synergistic Effect of Amphiphiles at Oil-Water Interface: By Monte Carlo Simulation

Amphiphile-oil-water system is complicated. The real behavior of amphiphile in the interface is still undnown despite that this behavior is very important in determining the stability of emulsion system. In this paper, the interface properties of amphiphile at oil-water interface were investigated by a square-lattice model Monte Carlo simulation method. The synergistic effect was found for hydrophobic and hydrophilic amphiphile mixture systems; and the synergistic effect disappears or was weakened as the amphiphile at the interface region became dilute with the increasing of temperature.

Synthesis of Sulfated Cyclodextrin Amphiphiles with Liposomal Encapsulation Properties

A novel class of amphiphiles with sulfate groups at the C-6 position and palmitoyl groups at the C-2, 3 positions of α-, β-, and γ-cyclodextrin (CD) were efficiently synthesized. These compounds formed stable monolayers with high collapse pressures at the air-water interface. The mixed monolayer behaviors of the 6-O-sulfated CD amphiphiles (SO3-CDC16) in the presence of dipalmitoyl phosphatidylcholine (DPPC) and cholesterol were discussed using the surface pressure-molecular area (π-A) isotherms. The collapse pressures showed maxima at molar ratios of SO3-CDC16 lower than 10 mol%. A morphological analysis of the liposomes containing DPPC and 4 mol% SO3-CDC16 formed in PBS was carried out using transmission electron microscopy with negative staining, and vesicles with maximum diameters of 350-500 nm were observed. Moreover, the releasing ability of these liposomes was examined using a fluorescent compound, calcein. It was clearly shown that liposomes containing SO3-CDC16 could release encapsulated calcein more easily than liposomes consisting only of DPPC, and that the release rate depended on the phase transition temperature of the SO3-CDC16 included in the liposome membrane.

An Integrated Anti-Fouling and Anti-Corrosion Coating Enabled by rGO/AgNPs and Amphiphilic Networks

Marine corrosion and biofouling are challenges that affect marine industrial equipment,and protecting equipment with functional coatings is a simple and effective approach.However,it is extremely difficult to combine anti-corrosion and anti-fouling properties in a single coating.In this work,we combine reduced graphene oxide(rGO)/silver nanoparticles(AgNPs)with a hydrophilic polymer in a bio-based silicone-epoxy resin to create a coating with both anti-fouling and anti-corrosion properties.The excel-lent anti-fouling performance of the coating results from a ternary synergistic mechanism involving foul-ing release,contact inhibition,and a hydration effect,while the outstanding anti-corrosion performance is provided by a ternary synergistic anti-corrosion mechanism that includes a dense interpenetrating net-work(IPN)structure,a barrier effect,and passivation.The results show that the obtained coating pos-sesses superior anti-fouling activity against protein,bacteria,algae,and other marine organisms,as well as excellent anti-corrosion and certain self-healing properties due to its dynamic cross-linked net-work of rGO/AgNPs and the hydrophilic polymer.This work provides an anti-corrosion and anti-fouling integrated coating for marine industrial equipment.

Study on Adsorption Behavior of P-nitroaniline from Aqueous Solution by Amphiphilic Hollow Carbonaceous Microspheres

[Objective] The research was aimed to study the adsorption behavior of p-nitroaniline from aqueous solution by porous hollow carbonaceous spheres （PHCSs）.[Method] The effects of pH,temperature and amount of carbonaceous microspheres on adsorption behavior of p-nitroaniline were investigated.[Result] The adsorption amount was affected by temperature slightly,and it decreased with the increase of temperature within a certain range.PHCSs had a higher adsorption capacity as pH was in the range of 2.0-8.0.The adsorption amount of p-nitroaniline was proportional to PHCSs amount within a certain range until it reached a saturation level.The adsorption isotherms of p-nitroaniline appeared to be nonlinear and obeyed to Freundlich equation very well.[Conclusion] The amphiphilic property and the specific chemical functional groups of PHCSs enable them to be a potentially excellent sorbent.

Amphiphilic sodium alginate-vinyl acetate microparticles for drug delivery

To overcome the fast or burst release of hydrophilic drugs from hydrophilic alginate-based carriers,hydrophobic molecule(vinyl acetate,VAc)was grafted on alginate(Alg),which was further used to prepare drug carriers.Amphiphilic Alg-g-PVAc hydrogel beads were firstly prepared by emulsification/internal gelation technique for the loading of bovine serum albumin(BSA).Then,chitosan was coated on the surface of beads to form novel amphiphilic Alg-g-PVAc/chitosan(Alg-g-PVAc/CS)microcapsules.The BSA-loading amphiphilic Alg-g-PVAc/chitosan(Alg-g-PVAc/CS)microcapsules display similar morphology and size to the hydrophilic alginate/chitosan(AC)microcapsules.However,the drug loading and loading efficiency of BSA in Alg-g-PVAc/CS microcapsules are higher,and the release rate of BSA from Alg-g-PVAc/CS microcapsules is slower.The results demonstrate that the introduction of hydrophobic PVAc on alginate can effectively help retard the release of BSA,and the higher degree of substitution is,the slower the release rate is.In addition,the complex membrane can also be adjusted to delay the release of BSA.As a whole,amphiphilic sodium alginate-vinyl acetate/CS microparticles could be developed for macromolecular drug delivery.

Synthesis of an Amphiphilic Dendrimer-Like Block Copolymer and Its Application on Drug Delivery

Dendrimer-like amphiphilic copolymer is a kind of three-dimensional spherical structure polymer. An amphiphilic dendrimer-like diblock copolymer, PEEGE-G2-b-PEO（OH）12, constituted of a hydrophobic poly（ethoxyethyl glycidol ether） inner core and a hydrophilic poly（ethylene oxide） outer layer, has been successfully synthesized by the living anionic ring-opening polymerization method. The intermediates and targeted products were charac-terized with 1H NMR spectroscopy and gel permeation chromatography. The application on drug delivery of dendrimer-like diblock copolymer PEEGE-G2-b-PEO（OH）12 using DOX as a model drug was also studied. The drug loading content and encapsulation e ciency were found at 13.07% and 45.75%, respectively. In vitro release experiment results indicated that the drug-loaded micelles exhibited a sustained release behavior under acidic media.

NOVEL AMPHIPHILIC FLUORESCENT GRAFT COPOLYMER: SYNTHESIS, CHARACTERIZATION AND ENCAPSULATION OF A HYDROPHOBIC AGENT

Novel amphiphilic fluorescent graft copolymer （PVP-PyAHy） was successfully synthesized by the free radical copolymerization of hydrophobic monomer N-（1-pyrenebutyryl）-N＇-acryloyl hydrazide （PyAHy） with hydrophilic precursor polymers of vinyl-functionalized poly（N-vinylpyrrolidone） （PVP） in DMF. The copolymer is amphiphilic and has intrinsic fluorescence. FT-IR, ^1H-NMR, TEM, gel permeation chromatography-multi-angle laser light scattering, UV-Vis spectroscopy and fluorescence spectroscopy were used to characterize this copolymer. The TEM observation shows that the copolymer PVP-PyAHy forms micelles in aqueous solution. Results of fluorometric measurements illustrate that the critical micelle concentration （CMC） value of PVP-PyAHy in aqueous solution is about 0.90 mg/mL. To examine the encapsulation ability of the copolymer in aqueous media, methyl yellow was employed as a model hydrophobic agent. The loading level of the polymer to methyl yellow is 8.8 mg/g. The cytotoxicity assays for Madin Darby Canine Kidney （MDCK） cells shows good biocompatibility of PVP-PyAHy in vitro. These results suggest the potential of this copolymer PVP-PyAHy as drugs delivery carrier and fluorescent tracer.

Preparation of Nano-porous Materials(Ⅰ) by Polymerization of Amphiphile Self-assemblies

The polymerization of amphiphilic self assemblies is a promising method to synthesize nano structured materials with novel properties. These materials have many attractive features for their application in biomedical area and materials science, such as catalysis, separation, surface modification, and therapeutics areas. A general review on the polymerization of lipids and surfactant self assemblies to amphiphilic self assemblies is given in this paper with 49 references. The polymerization and the subsequently resulted structure of lipids in different morphologies are summarized. The polymerization of polymerizable surfactants(surfmers) in emulsion and liquid crystalline phases are also discussed. The potential application of new nano porous materials is briefly described.

Synthesis and characterization of H-type amphiphilic liquid crystalline block copolymers by ATRP

H-type amphiphilic liquid crystalline block copolymers containing azobenzene were synthesized by atom transfer radical polymerization （ATRP）. Macroinitiators prepared by the esterification between poly（ethylene oxide） （PEG） and 2,2-dichloroacetyl chloride were utilized to initiate the polymerization of 6-[4-（4-ethoxyphenylazo）phenoxy]hexyl rnethacrylate （M6C）. The resulting macroinitiators and block copolymers were characterized by ^1H NMR, gel permeation chromatography （GPC）. Polarizing optical microscopy （POM） and differential scanning calorimetry （DSC） preliminarily revealed the liquid crystalline property of these block copolymers. This series of liquid crystalline block copolymers are promising in some areas, such as optical data storage, optical switch, and molecular devices.

SYNTHESIS OF AMPHIPHILIC COMB-SHAPED COPOLYMERS USED FOR SURFACE MODIFICATION OF PVDF MEMBRANES

The synthesis of a novel amphiphilic comb-shaped copolymer consisting of a main chain of styrene-(N-(4- hydroxyphenyl) maleimide)(SHMI) copolymer and poly(ethylene glycol) methyl ether methacrylate(PEGMA) side groups was achieved by atom transfer radical polymerization(ATRP).The amphiphilic copolymers were characterized by ~1H-NMR, Fourier transform infrared(FTIR) spectroscopy and gel permeation chromatography(GPC).From thermogravimetric analysis (TGA),the decomposition temperature of SHMI-g-PEGMA is lower ...

Structural Multiplicity of Monomers of an Amphiphilic Porphyrin at the Outer Surface of CTAB Micelle

A synthesized amphiphilic porphyrin, 5,10,15-tri(p-hydroxyphenyl)-20-(p-hexadecyloxyphenyl) porphyrin, can take a transfer process for the porphyrin moiety from the inner core to the outer surface laver of cetyltrimethylammonium bromide (CTAB) micelle. The increasing of FWHH of the Sorer band was attributed to the multiplicity of porphyrin monomers related with deprotonation degree, arrangement, orientation, and position of porphyrin moiety at the surface al ea rather than the aggregates associated with irregular orientation of neighboring porphyrins.

STUDIES ON SELF-ASSOCIATIVE BEHAVIOR OF A NOVEL CATION AMPHIPHILIC POLYMER

A novel associating polymer P(AEBA) was synthesized by radical polymerization of the cationic amphiphilic monomer,4-(2-(acryloyloxy)ethoxy)benzyl tri-ethyl ammonium bromide(AEBA),in aqueous solutions.P(AEBA) displays a strong tendency for self-association in aqueous solutions and is sensitive to the external stimulation such as added salt.The associative properties and morphologies of P(AEBA) were studied by fluorescnece probe technique,viscometry and TEM.In dilute salt-free solutions P(AEBA) behaves as pol...

AMPHIPHILIC STAR-BLOCK COPOLYMERS BY IODIDE-MEDIATED RADICAL POLYMERIZATION

Amphiphilic star-block copolymers composed of polystyrene and poly（acrylic acid） were synthesized by iodide- mediated radical polymerization. Firstly, free radical polymerization of styrene was carried out with AIBN as initiator and 1,1,1-trimethyolpropane tri（2-iodoisobutyrate） as chain transfer agent, giving iodine atom ended star-shaped polystyrene with three arm chains, R（polystyrene）3. Secondly, tert-butyl acrylate was polymerization using polystyrene obtained as macro-chain transfer agent, and star-block copolymer, R（polystyrene-b-poly（tert-butyl acrylate））3 with controlled molecular weight was obtained. Finally, amphiphilic star-block copolymer, R（polystyrene-b-poly（acrylic acid））3 was obtained by hydrolysis of R（polystyrene-b-poly（tert-butyl acrylate））3 under acidic condition.

CONTROLLED SYNTHESIS OF AMPHIPHILIC BLOCK POLYMERS HAVING GLUCOSE RESIDUES AND THEIR STRUCTURE FORMATION

Vinyl ether (VE)-based amphiphilic block copolymers with D-glucose residues as hydrophilicpendants were synthesized by CH_3 CH(OiBu)Cl/ZnI_2-initiated sequential living cationic copolymerization of3-O-(vinyloxy)ethyl-1, 2:5, 6-di-O-isopropylidene-D-glucofuranose (IGVE) and isobutyl VE (IBVE ) andsubsequent deprotection. The precursor block copolymers had a narrow molecular weight distribution(M_w/M_n～1.1) and a controlled segmental composition. The solubility characteristics of the amphiphiliccopolymer depended strongly on composition. Their solvent-cast thin films were examined, under atransmission electron microscope, and could be seen to exhibit various microphase-separated surfacemorphologies such as spheres, cylinders, and lamellae, depending on composition. The amphiphiliccopolymers with the appropriate segmental composition were found to form a stable monolayer at the air-water interface, which was successfully transferred onto a substrate by the Langmuir-Blodgett (LB)technique. The layered strucfure of the built-up LB films was controlled by blending the homopolymer.

Amphiphilic Poly (3-Hydroxy Alkanoate)s: Potential Candidates for Medical Applications

Poly (3-hydroxy alkanoate)s, PHAs, have been very attractive as biomaterials due to their biodegradability and biocompatibility. These hydrophobic natural polyesters, PHAs, need to have hydrophilic character particularly for drug delivery systems. In this manner, poly (ethylene glycol) (PEG) and hydrophilic functional groups such as amine, hydroxyl, carboxyl and sulfonic acid have been introduced into the PHAs in order to obtain amphiphilic polymers. This review involves in the synthesis and characterization of the amphiphilic PHAs.

The Behavior of Amphiphile at Oil-Water Interface by Monte Carlo Simulation

A novel simple two-dimensional square-lattice model of amphiphile at oil-water interface is developed,in which oil and water act as solvent and occupy empty sites and amphiphile occupies chains of sites. In this model, the oil-water interface is fixed, And amphiphile molecules will be enriched at the oil-water interface. The interfacial concentration of amphiphile calculated by Monte Carlo method shows that it is easier for the hydrophilic-hydrophobic balanced amphiphile to stay at the interface. And the adsorption of amphiphile increases with the increase of amphiphile concentration and the decrease with temperature.

SYNTHESIS AND CHARACTERIZATION OF AMPHIPHILIC GRAFT COPOLYMER CONTAINING MICROPHASE SEPARATED AND LONG POLY(ETHYLENE OXIDE) SIDE CHAIN STRUCTURES

Acryloyl terminated Poly (ethyleneoxide)macromonomers (PEO-A) with different PEO chain lengths have been prepared by deactivation of PEO alkoxide with acryloyl chloride. A new kind of amphiphilic polystyrene-g-poly (ethylene oxide)graft copolymer containing both microphase separated and PEO side chain structures has been synthesized from radical copolymerization of PEO-A macromonomer with styrene. After careful purification by a newly-developed method called 'selective dissolution', the well-defined structure of the purified copolymers was confirmed by IR, ~1H-NMR and GPC. Various experimental parameters controlling the copolymerization were studied in detail. The results indicated that the feed ratio of styrene to macromonomer(S/M) was the most important determining factor for the composition of the copolymers. A detailed 'comb- model' was proposed to describe the molecular structure of the graft copolymers. Finally, this amphiphilic graft copolymers may readily form microphase separated structures as clearly indicated by transmission electron microscopy.

Study of the reinforced mechanism of fly ash on amphiphilic polymer gel

Amphiphilic polymer gels are widely used in heterogeneous reservoirs for conformance control technology.However,in high temperature and high salinity of calcium and magnesium reservoirs,amphiphilic polymer gels cannot maintain effective performance.In this work,a novel reinforced amphiphilic polymer gel(F-PADC gel)was prepared by physically mixing polymer solution and fly ash(FA),which is an extremely low cost material.The viscoelasticity and stability of the F-PADC gel were studied by rheometry and micro-rheometry.The reinforced mechanism of FA on amphiphilic polymer gels was revealed.The results show that the addition of FA can make the gel more robust with a denser network structure.On the fifth day,the elastic modulus(G’)increases from 5.2 to 7.0 Pa and the viscosity modulus(G")increases from 0.4 to 0.6 Pa at the frequency of 1 Hz,which improves the viscoelasticity of the gel system.More importantly,the F-PADC gel does not degrade after aging at 85℃for 180 d.And its viscoelasticity increases obviously,G′and G"increase to 110.0 Pa and 3.5 Pa,respectively,showing excellent anti-aging stability.Moreover,FA amphiphilic polymer gels have a good injectivity and a perfect plugging rate of 98.86%,which is better than that of sole amphiphilic polymer gels.This novel mixed FA amphiphilic polymer gels can prove to be a better alternative to conventional polymer gels to enhance oil recovery in high temperature and high salinity reservoirs.