Oneε-Ga_(2)O_(3)-based solar-blind Schottky photodetector emphasizing high photocurrent gain and photocurrent-intensity linearity

Theε-Ga_(2)O_(3) thin film was grown on sapphire substrate by using metalorganic chemical vapor deposition(MOCVD)method,and then was used to fabricate a deep-ultraviolet(DUV)photodetector(PD).Theε-Ga_(2)O_(3) thin film shown good crystal quality and decent surface morphology.Irradiated by a 254-nm DUV light,the photodetector displayed good optoelectronic performance and high wavelength selectivity,such as photoresponsivity(R)of 175.69 A/W,detectivity(D*)of 2.46×10^(15) Jones,external quantum efficiency(EQE)of 8.6×10^(4)%and good photocurrent-intensity linearity,suggesting decent DUV photosensing performance.At 5 V and under illumination with light intensity of 800μW/cm2,the photocurrent gain is as high as 859 owing to the recycling gain mechanism and delayed carrier recombination;and the photocurrent gain decreases as the incident light intensity increases because of the recombination of photogenerated carriers by the large photon flux.

Dynamic range and linearity improvement for zero-field single-beam atomic magnetometer

Zero-field single-beam atomic magnetometers with transverse parametric modulation for ultra-weak magnetic field detection have attracted widespread attention recently.In this study,we present a comprehensive response model and propose a modification method of conventional first harmonic response by introducing the second harmonic correction.The proposed modification method gives improvement in dynamic range and reduction of linearity error.Additionally,our modification method shows suppression of response instability caused by optical intensity and frequency fluctuations.An atomic magnetometer with single-beam configuration is built to compare the performance between our proposed method and the conventional method.The results indicate that our method’s magnetic field response signal achieves a 5-fold expansion of dynamic range from 2 nT to 10 nT,with the linearity error decreased from 5%to 1%.Under the fluctuations of 5%for optical intensity and±15 GHz detuning of frequency,the proposed modification method maintains intensityrelated instability less than 1%and frequency-related instability less than 8%while the conventional method suffers 15%and 38%,respectively.Our method is promising for future high-sensitive and long-term stable optically pumped atomic sensors.

Experimental and Simulation Analysis of Two-Tone and Three-Tone Photodetector Linearity Characterizing Systems

Two measurement techniques are investigated to characterize photodetector linearity. A model for the two-tone and three-tone photodetector systems is developed to thoroughly investigate the influences of setup components on the measurement results. We demonstrate that small bias shifts from the quadrature point of the modulator will induce deviation into measurement results of the two-tone system, and the simulation results correspond well to experimental and calculation results.

High-FM-linearity wideband chirp generator

An S-band wideband chirp generator using specially designed fast lock phase lock loop(FL-PLL) was demonstrated.To realize high linearity,structure of direct digital synthesizer(DDS) plus FL-PLL was used.DDS gives ideal linearity while FL-PLL retains the linearity and provides radio frequency.The system block diagrams were showed and the timing relationships of the components were provided.Two important considerations of the system,wideband loop and wideband voltage control oscillator(VCO),were discussed;meanwhile,after analyzing the considerations,corresponding solutions were presented.Measurement results show that the generated 2560MHz to 2960MHz chirp reaches a high FM linearity of 0.003%.

Development and Assessment of Quality Control Phantom for Linearity and Uniformity

Abstract: The aim of this study was to develop a cheap, locally made and friendly applicable phantom for gamma camera quality control and to test its validity relative to standard results (intrinsic and extrinsic spatial linearity and intrinsic and extrinsic uniformity) of gamma camera SPECT. And the significance of this experimental study was to introduce a multi-purpose phantom for gamma camera which could overcome the risk accompanied by quality control test procedure such as detector crystal damage and the appearance of moiré patterns. The results of the developed phantom showed an average count difference of 0.7% relative to the standard phantom and about 4% in X- to Y-axis directions relative to the standard phantom. Also, the measured absolute linearity was 0.63 mm in X direction and 0.64 mm in Y direction for the UFOV compare with 0.70 mm value of acceptance test. And the I.U. and D.U. of the developed phantom were 3.18% and 2.27% respectively for the UFOV relative to the standard phantom I.U. and D.U. (2.0% and 1.5%) for the UFOV respectively.

The Efficiency of Syntactic Linearity in Simultaneous Interpreting

With the development of our country, the use of simultaneous interpretation also increased greatly. As everyone knows, simultaneous interpreting is a very complex task. Therefore, the interpreters need to grasp some particular strategies to reduce the difficulty of simultaneous interpreting. Then this thesis aims to discuss the efficiency of Syntactic Linearity in Simultaneous Interpreting.The theory evidence of this thesis comes from the most fundamental principle in Simultaneous Interpreting, that is, syntactic linearity, which helps the interpreters to deal with long and complex sentences even if he or she has no time to hear and remember the whole sentence.

The Feasibility of the Syntactic Linearity in the Chinese Version of Life of Pie

Translation is by no means a process of bilingual alternating.Practically speaking,translators need to abide by different princi-ples according to different contexts and readers.The emergence of translation theories in the world contributes a lot for cross-culturecommunication.With the development and prevalence of the simultaneous interpreting,people tend to shift their eyes from translation tointerpretation.Syntactic linearity makes interpreting easier and more efficient.However,whether this strategy can be applied into writ-ten translation is unknown.This thesis takes Life of Pi as an example to further discuss the feasibility of syntactic linearity used in liter-ary translation,on the basis of interpreting and translating theories.

Synchronization and Stability of a Nonlinear Vibrating Mechanical System Characterized by Asymmetrical Piecewise Linearity

In previous studies about the synchronization of vibrators,the restoring forces of springs are mainly treated as linear directly,whereas the nonlinear features are rarely considered in vibrating systems.To make up this drawback,a dynamical model of a nonlinear vibrating mechanical system with double rigid frames(RFs),driven by two vibrators,is proposed to explore the synchronization and stability of the system.In this paper,the nonlinearity is reflected in nonlinear restoring forces of springs characterized by asymmetrical piecewise linear,where the nonlinear stiffness of springs is linearized equivalently using the asymptotic method.Based on the average method and Hamilton’s principle,the theory conditions to achieve synchronization and stability of two vibrators are deduced.After the theory analyses,some numerical qualitative analyses are given to reveal the coupling dynamical characteristics of the system and the relative motion properties between two RFs.Besides,some experiments are carried out to examine the validity of the theoretical results and the correctness of the numerical analyses results.Based on the comparisons of the theory,numeric and experiment,the ideal working regions of the system are suggested.Based on the present work,some new types of vibrating equipment,such as vibrating discharging centrifugal dehydrators/conveyers/screens,can be designed.

A 600W Broadband Doherty Power Amplifier with Improved Linearity for Wireless Communication System

An asymmetric Doherty architecture based on three identical transistors is proposed in this paper. This proposed three.way topology reduces the difficulty in designing matching networks brought by the low optimal impedance of high power transistors. And the inverted Doherty topology as well as carefully chosen value of load impedance makes it possible to extend the bandwidth of high power amplifiers. Besides, bias networks of this proposed three.way architecture are also carefully considered to improve the linearity. The proposed high power three.way Doherty power amplifier(3W.DPA) is designed and fabricated based on theoretic analysis. Its maximum output power is about 600 Watts and the drain efficiency is above 35.5% at 9d B back off output power level from 1.9GHz to 2.2 GHz and the saturated drain efficiency is above 47% across the whole frequency band. The measured concurrent two.tone results suggest that the linearity of DPA is improved by at least 5d B.

High linearity AlGaN/GaN HEMT with double-Vth coupling for millimeter-wave applications

We demonstrated an AlGaN/GaN high electron mobility transistor(HEMT)namely double-Vthcoupling HEMT(DVC-HEMT)fabricated by connecting different threshold voltage(Vth)values including the slant recess element and planar element in parallel along the gate width with N;O plasma treatment on the gate region.The comparative studies of DVC-HEMT and Fin-like HEMT fabricated on the same wafer show significantly improved linearity of transconductance(Gm)and radio frequency(RF)output signal characteristics in DVC-HEMT.The fabricated device shows the transconductance plateau larger than 7 V,which yields a flattened fT/fmax-gate bias dependence.At the operating frequency of 30 GHz,the peak power-added efficiency(PAE)of 41%accompanied by the power density(Pout)of 5.3 W/mm.Furthermore,the proposed architecture also features an exceptional linearity performance with 1-d B compression point(P1 d B)of 28 d Bm,whereas that of the Fin-like HEMT is 25.2 d Bm.The device demonstrated in this article has great potential to be a new paradigm for millimeter-wave application where high linearity is essential.

A TECHNIQUE FOR MEASURING THE LINEARITY OF A LINEARLY FREQUENCY-MODULATED SIGNAL

A technique for measuring the linearity of a linearly frequency-modulated continuous wave (LFM-CW) signal is presented. It uses a delay-line and a mixer to sense the slope of the output of a sweep oscillator, so that the original form of frequency function deviated from idealized linear slope is retrieved by means of spectrum analysis. Consequently,the linearity of the LFM signal is determined. The formulation is performed based on the principle that an angle-modulated signal can be approximated by an amplitude-modulated signal if the modulation coefficient is sufficiently small. To examine the validity of the procedure and to study the effect of each parameter on the accuracy of measurement, a number of computer simulations has been made. The results of simulation show that the error of the measurement is less than 2%.

A Modification of the Relative Weightings of Symptoms Utilizing a Logistic Function to Enhance the Linearity of the Brief Psychiatric Rating Scale: A Retrospective Analysis

Introduction: Although the Brief Psychiatric Rating Scale (BPRS) is widely used for evaluating patients with schizophrenia, the meaning of the weights of the individual symptoms is ambiguous. The aims of the study were 1) to investigate whether the modification of relative weights of items of the BPRS is able to enhance its correlation with the Clinical Global Impression-Schizophrenia scale (CGI-SCH) and 2) to construct a potential modified BPRS. Methods: We evaluated 200 schizophrenia patients using the BPRS and the CGI-SCH and drew the scatter plot distributions of the two scales. Next, univariate regression for the CGI-SCH using individual symptoms of the BPRS was performed. Multivariate regression utilizing the ‘logistic function’ was then conducted to allocate marks to each item and Pearson’s r correlation coefficient and r-squared between the two scales were assessed. After that, we constructed an example of a potential modified BPRS. Results: With the scatter plot for the two scales, a logarithmic curve was obtained;this was described by [CGI-SCH] = 3.2248 × ln[18-item BPRS] – 7.2044 (p i” that could express the relative weights of individual symptoms. Subsequently, modification of point allocations according to “Pi” yielded a Pearson’s r of 0.8491 and an r-squared of 0.7718 (not changed) (both p < 0.001). An example of a potential modified BPRS was constructed. Conclusions: Within the limits of our data, the weightings of items of the BPRS improved the correlation of the BPRS with the CGI-SCH for evaluating schizophrenia.

Optical solitons supported by finite waveguide lattices with diffusive nonlocal nonlinearity

We investigate the properties of fundamental,multi-peak,and multi-peaked twisted solitons in three types of finite waveguide lattices imprinted in photorefractive media with asymmetrical diffusion nonlinearity.Two opposite soliton selfbending signals are considered for different families of solitons.Power thresholdless fundamental and multi-peaked solitons are stable in the low power region.The existence domain of two-peaked twisted solitons can be changed by the soliton self-bending signals.When solitons tend to self-bend toward the waveguide lattice,stable two-peaked twisted solitons can be found in a larger region in the middle of their existence region.Three-peaked twisted solitons are stable in the lower(upper)cutoff region for a shallow(deep)lattice depth.Our results provide an effective guidance for revealing the soliton characteristics supported by a finite waveguide lattice with diffusive nonlocal nonlinearity.

Linearity Comparison of Three Colorimetric Cytotoxicity Assays

Cell viability assays, including techniques to assess the proliferation of cancer cell lines, constitute a rapid, inexpensive and sensitive screening method to pre-clinically evaluate the activity of a potential drug or substance. This study investigates and compares seeding densities and linearity of three such methods: MTT ((3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyl tetrazolium bromide), SRB (sulforhodamine B) and CVE (crystal violet elution) assays. SRB and CVE are staining assays for proteins, while MTT measures the mitochondrial activity of living cells. Assays were performed on five cancer cell lines, A375, PC3, DU145, HCT116 and COR-L105, and the coefficient of determination (R2) was employed to determine fit into a linear regression model. The results show that CVE is the most linear assay at fixed time points. SRB at 515 nm is better for measurements over time. Seeding densities between 9000 and 12,000 were the optimum. However, seeding densities and doubling times should be taken into consideration when designing an experiment.

Nonlinear Resistance Circuit Subsection Linearity Decomposition Fitting Analysis

The analysis of circuits is frequently required in the electricity of physics. When analyzing circuits, the general idea is to study the issues related to nonlinear resistance circuits based on commonly used physical and electrical theory. Generally, circuits can be divided into linear resistance circuits and nonlinear resistance circuits. However, for some nonlinear resistance circuit, a small part of them are decomposed through subsection linearity while most of them are adopted the form of hieroglyph combination for subsection decomposition fitting analysis. For the following contents, the author will adopt curve layout method to analyze nonlinear resistance element and relation characteristics of voltage and current;to state the characteristics and nature of common electronic elements in our life, and concepts of concave resistance and convex resistance;to analyze the characteristics of nonlinear resistance circuits through electrical circuit analysis method based on the electrical theorem of physics;finally, to analyze referring to actual cases, study the veracity, verify the feasibility and scientificity of the adopted analytical approach, apply image graphics of the resistance circuits in the convenient way to solve complicated design problems among actual electrical problems.

Optimizing the Stage Resolution of a 10-Bit, 50 Ms/Sec Pipelined A/D Converter &Its Impact on Speed, Power, Area, and Linearity

At high speeds and high resolution, the Pipeline ADCs are becoming popular. The options of different stage resolutions in Pipelined ADCs and their effect on speed, power dissipation, linearity and area are discussed in this paper. The basic building blocks viz. Op-Amp Sample and Hold circuit, sub converter, D/A Converter and residue amplifier used in every stage is assumed to be identical. The sub converters are implemented using flash architectures. The paper implements a 10-bit 50 Mega Samples/Sec Pipelined A/D Converter using 1, 1.5, 2, 3, 4 and 5 bits/stage conversion techniques and discusses about its impact on speed, power, area, and linearity. The design implementation uses 0.18 μm CMOS technology and a 3.3 V power supply. The paper concludes stating that a resolution of 2 bits/stage is optimum for a Pipelined ADC and to reduce the design complexity, we may go up to 3 bits/stage.

New Facts in Regression Estimation under Conditions of Multicollinearity

This paper considers the approaches and methods for reducing the influence of multi-collinearity. Great attention is paid to the question of using shrinkage estimators for this purpose. Two classes of regression models are investigated, the first of which corresponds to systems with a negative feedback, while the second class presents systems without the feedback. In the first case the use of shrinkage estimators, especially the Principal Component estimator, is inappropriate but is possible in the second case with the right choice of the regularization parameter or of the number of principal components included in the regression model. This fact is substantiated by the study of the distribution of the random variable , where b is the LS estimate and β is the true coefficient, since the form of this distribution is the basic characteristic of the specified classes. For this study, a regression approximation of the distribution of the event based on the Edgeworth series was developed. Also, alternative approaches are examined to resolve the multicollinearity issue, including an application of the known Inequality Constrained Least Squares method and the Dual estimator method proposed by the author. It is shown that with a priori information the Euclidean distance between the estimates and the true coefficients can be significantly reduced.

Toward Circumventing Collinearity Effect in Nonlinear Spectral Mixture Analysis by Using a Spectral Shape Measure

Nonlinear spectral mixture analysis (NSMA) is a widely used unmixing algorithm. It can fit the mixed spectra adequately, but collinearity effect among true and virtual endmembers will decrease the retrieval accuracies of endmember fractions. Use of linear spectral mixture analysis (LSMA) can effectively reduce the degree of collinearity in the NSMA. However, the inadequate modeling of mixed spectra in the LSMA will also yield retrieval errors, especially for the cases where the multiple scattering is not ignorable. In this study, a generalized spectral unmixing scheme based on a spectral shape measure, i.e. spectral information divergence (SID), was applied to overcome the limitations of the conventional NSMA and LSMA. Two simulation experiments were undertaken to test the performances of the SID, LSMA and NSMA in the mixture cases of treesoil, tree-concrete and tree-grass. Results demonstrated that the SID yielded higher accuracies than the LSMA for almost all the mixture cases in this study. On the other hand, performances of the SID method were comparable with the NSMA for the tree-soil and tree-grass mixture cases, but significantly better than the NSMA for the tree-concrete mixture case. All the results indicate that the SID method is fairly effective to circumvent collinearity effect within the NSMA, and compensate the inadequate modeling of mixed spectra within the LSMA.

THE DEVELOPMENT OF A GOOD LINEARITY PHOTOELECTRIC COUPLING ISOLATION EEG-AMPLIFIER

Two designs of EEG-amplifier are given based on analyses about traditional am-plifier circuits,which have the advantages of good isolation,good linearity,lownoise,etc..Precise instrument amplifiers from BURR-BROWN Co.are used in the front ofboth systems,which have high input resistance (】50MΩ),very high CMRR (】

Studying Effect of Magnetizing Curve Nonlinearity Index on the Occurring Chaotic Ferroresonance Oscillation in Autotransformers

This paper investigates the effect of iron core saturation characteristic degree on the onset of chaotic ferrore-sonance and duration of transient chaos in an autotransformer. The transformer chosen for study has a rating of 50 MVA, 635.1 kV, the magnetization characteristic of the autotransformer is modeled by a single-value two-term polynomial with q = 5, 7, 11. The core loss is modeled by a linear resistance and is considered a fix value for it. Simulation results are derived by using MATLAB software and nonlinear dynamics tool such as bifurcation and phase plan diagrams. It is shown settling down to the chaotic region is increased when degree of core nonlinearity is gone from 5 to 11.