A lithium(Li)vapour layer was formed around a flowing liquid Li limiter to shield against the plasma incident power and reduce limiter heat flux in the EAST tokamak.The results revealed that after a plasma operation o...A lithium(Li)vapour layer was formed around a flowing liquid Li limiter to shield against the plasma incident power and reduce limiter heat flux in the EAST tokamak.The results revealed that after a plasma operation of a few seconds,the layer became clear,which indicated a strong Li emission with a decrease in the limiter surface temperature.This emission resulted in a dense vapour around the limiter,and Li ions moved along the magnetic fleld to form a green shielding layer on the limiter.The plasma heat flux loaded on the limiter,measured by the probe installed on the limiter,was approximately 52%lower than that detected by a fast-reciprocating probe at the same radial position without the limiter in EAST.Additionally,approximately 42%of the parallel heat flux was dissipated directly with the enhanced Li radiation in the discharge with the liquid metal infused trenches(LIMIT)limiter.This observation revealed that the Li vapour layer exhibited an excellent shielding effect to liquid Li on plasma heat flux,which is a possible beneflt of liquid-plasma-facing components in future fusion devices.展开更多
This study examined the effects of plasma irradiation on an unwetted liquid lithium-based capillary porous system(Li-CPS). The Li-CPS was irradiated with high-density Ar plasma using a linear plasma device at Sichuan ...This study examined the effects of plasma irradiation on an unwetted liquid lithium-based capillary porous system(Li-CPS). The Li-CPS was irradiated with high-density Ar plasma using a linear plasma device at Sichuan University for Plasma Surface Interaction. The high-speed camera, Langmuir probe, and multi-channel spectrometer were used to characterize the effects of plasma irradiation. Upon Ar plasma irradiation, liquid Li drops were formed on the surface of the unwetted Li-CPS. Immediately after this irradiation, the drops fractured and were ejected into the plasma within ~20 ms scale, which is not observed before to the best of our knowledge. Related results showed that the ejection behavior of Li could effectively cool electron temperature and reduce incident heat flux by ~30% and correspondingly matrix temperature ~150 ℃, revealing an enhanced vapor shielding effect. The involved internal mechanism and physical processes deserve further investigations.展开更多
Thick target yields of α particles emitted in the 6Li(d,α)4He and 7Li(p,α)4He reactions were measured for Li target in the solid and liquid phase. Observed reaction rates for the liquid Li are always larger than th...Thick target yields of α particles emitted in the 6Li(d,α)4He and 7Li(p,α)4He reactions were measured for Li target in the solid and liquid phase. Observed reaction rates for the liquid Li are always larger than those for the solid. This suggests that the stopping power of hydrogen ion in the liquid Li metal might be smaller than in the solid. Using the empirically obtained stopping power for the liquid Li,we have deduced the screening potentials of the Li+p and Li+d reactions in both phases. The deduced screening potential for the liquid Li is about 500 eV larger than for the solid. This difference is attributed to the effect of liquefied Li+ ions. It is concluded that the ionic screening is much stronger than the electronic screening in a low-temperature dense plasmas.展开更多
1 Introduction As the lightest metal with the unique properties of energy production and storage,lithium is regarded as the new century energy metal.Lithium and its compounds were widely used in various industrial fie...1 Introduction As the lightest metal with the unique properties of energy production and storage,lithium is regarded as the new century energy metal.Lithium and its compounds were widely used in various industrial fields,especially in展开更多
Li-F granites all over the world can be represented by three end members, i. e., theNa-rich ongonite (O), the K-rich xianghualingite (X) and the Si-rich topazite (T). Charac-ters and criteria are presented for these e...Li-F granites all over the world can be represented by three end members, i. e., theNa-rich ongonite (O), the K-rich xianghualingite (X) and the Si-rich topazite (T). Charac-ters and criteria are presented for these end-member rocks. Vertical zoning in Li-F granites, asreflected by increasing normative Q and C (corundum) and decreasing ALK (K2O + Na2O)with increasing content of fluorine, can be explained using the three-end-member scheme interms of petrochemistry and norms. Considering the difference in melt structure, viscosity anddensity between the end members, in couple with the reguarities that govern the Na-K and Si-ALK segregation known from field evidence and experiments, it is suggested that the three endmembers may have resulted from liquid segregation (immiscibility) rather than from crystalfractionation as commonly believed.展开更多
Li–O_2 batteries have attracted much attention because of their high specific energy. However, safety problem generated mainly from the flammable organic liquid electrolytes have hindered the commercial use of Li–O_...Li–O_2 batteries have attracted much attention because of their high specific energy. However, safety problem generated mainly from the flammable organic liquid electrolytes have hindered the commercial use of Li–O_2 batteries. One of the competitive alternatives is polymer electrolytes due to their flexibility and non-flammable property. Moreover, the hybrid polymer electrolyte with enhanced electrochemical properties would be achieved by incorporating inorganic filler, liquid plasticizer and redox mediator into the polymer. While most researches of the hybrid polymer electrolyte focused on Li-ion batteries, few of them took account into its application in Li–O_2 batteries. In this review, we mainly discuss hybrid polymer electrolytes for Li–O_2 batteries with different composition. The critical issues including conductivity and stability of electrolytes are also discussed in detail. Our review provides some insights of hybrid polymer electrolytes for Li–O_2 batteries and offers necessary guidelines for designing the suitable hybrid polymer electrolyte for Li–O_2 batteries as well.展开更多
Li-air batteries have received much attention in the past several years because of their large theoretical specific energy density, stable output voltage, cost-effective, energy-efficient and pollution free, and have ...Li-air batteries have received much attention in the past several years because of their large theoretical specific energy density, stable output voltage, cost-effective, energy-efficient and pollution free, and have broad application prospects. If it is successfully developed, the battery could be an excellent energy storage device for renewable energy sources such as wind, solar, and tidal energy, which brings a prospect for human to solve the problem of environment pollution and energy crisis. But the electrolyte is a crucial component of Li-air battery and the electrochemical performance of the battery is determined by electrolyte to a great extent. Due to the react violently between lithium and water, it is not practical for Li-air battery to use directly an aqueous electrolyte unless the anode can be protected from degradation. In this review, we presented the latest research progress on the non-aqueous electrolyte, i.e. organic electrolyte, ionic liquid and solid electrolyte. We elaborated the influence of solvents, and possible additives, and/or their combination Li-air battery’s performance. Finally, we provided insights into the prospect of non-aqueous electrolyte for Li-air battery.展开更多
基金funded by the National Key Research and Development Program of China(No.2017YFE0301100)National Natural Science Foundation of China(Nos.11905138,11905148 and 11905254)+2 种基金the U.S.Dept.of Energy contract DE-AC02-09CH11466 and grant DESC0016553Users with Excellence Program of Hefei Science Center CAS(No.2020HSC-UE010)Interdisciplinary and Collaborative Teams of CAS。
文摘A lithium(Li)vapour layer was formed around a flowing liquid Li limiter to shield against the plasma incident power and reduce limiter heat flux in the EAST tokamak.The results revealed that after a plasma operation of a few seconds,the layer became clear,which indicated a strong Li emission with a decrease in the limiter surface temperature.This emission resulted in a dense vapour around the limiter,and Li ions moved along the magnetic fleld to form a green shielding layer on the limiter.The plasma heat flux loaded on the limiter,measured by the probe installed on the limiter,was approximately 52%lower than that detected by a fast-reciprocating probe at the same radial position without the limiter in EAST.Additionally,approximately 42%of the parallel heat flux was dissipated directly with the enhanced Li radiation in the discharge with the liquid metal infused trenches(LIMIT)limiter.This observation revealed that the Li vapour layer exhibited an excellent shielding effect to liquid Li on plasma heat flux,which is a possible beneflt of liquid-plasma-facing components in future fusion devices.
基金supported by National Natural Science Foundation of China(Nos.11875198 and 11905151)China Postdoctoral Science Foundation(No.2019M663487)Sichuan Science and Technology Program(Nos.2021YJ0510 and 2021YFSY0015).
文摘This study examined the effects of plasma irradiation on an unwetted liquid lithium-based capillary porous system(Li-CPS). The Li-CPS was irradiated with high-density Ar plasma using a linear plasma device at Sichuan University for Plasma Surface Interaction. The high-speed camera, Langmuir probe, and multi-channel spectrometer were used to characterize the effects of plasma irradiation. Upon Ar plasma irradiation, liquid Li drops were formed on the surface of the unwetted Li-CPS. Immediately after this irradiation, the drops fractured and were ejected into the plasma within ~20 ms scale, which is not observed before to the best of our knowledge. Related results showed that the ejection behavior of Li could effectively cool electron temperature and reduce incident heat flux by ~30% and correspondingly matrix temperature ~150 ℃, revealing an enhanced vapor shielding effect. The involved internal mechanism and physical processes deserve further investigations.
基金Grant-in-Aid for Scientific Research from Japan Society for the Promotion of Science(19340051)
文摘Thick target yields of α particles emitted in the 6Li(d,α)4He and 7Li(p,α)4He reactions were measured for Li target in the solid and liquid phase. Observed reaction rates for the liquid Li are always larger than those for the solid. This suggests that the stopping power of hydrogen ion in the liquid Li metal might be smaller than in the solid. Using the empirically obtained stopping power for the liquid Li,we have deduced the screening potentials of the Li+p and Li+d reactions in both phases. The deduced screening potential for the liquid Li is about 500 eV larger than for the solid. This difference is attributed to the effect of liquefied Li+ ions. It is concluded that the ionic screening is much stronger than the electronic screening in a low-temperature dense plasmas.
基金Financial support from the National Natural Science Foundation of China (21276194)the Specialized Research Fund for the Doctoral Program of Chinese Higher Education (20101208110003)the Key Pillar Program of Tianjin Municipal Science and Technology (11ZCKGX02800)
文摘1 Introduction As the lightest metal with the unique properties of energy production and storage,lithium is regarded as the new century energy metal.Lithium and its compounds were widely used in various industrial fields,especially in
文摘Li-F granites all over the world can be represented by three end members, i. e., theNa-rich ongonite (O), the K-rich xianghualingite (X) and the Si-rich topazite (T). Charac-ters and criteria are presented for these end-member rocks. Vertical zoning in Li-F granites, asreflected by increasing normative Q and C (corundum) and decreasing ALK (K2O + Na2O)with increasing content of fluorine, can be explained using the three-end-member scheme interms of petrochemistry and norms. Considering the difference in melt structure, viscosity anddensity between the end members, in couple with the reguarities that govern the Na-K and Si-ALK segregation known from field evidence and experiments, it is suggested that the three endmembers may have resulted from liquid segregation (immiscibility) rather than from crystalfractionation as commonly believed.
基金partially supported by National Natural Science Foundation of China(21673116,21633003,51602144)National Key Research and Development Program of China(2016YFB0100203)+2 种基金Natural Science Foundation of Jiangsu Province of China(BK20160068)Fundamental Research Funds for the Central Universities(021314380130)PAPD of Jiangsu Higher Education Institutions
文摘Li–O_2 batteries have attracted much attention because of their high specific energy. However, safety problem generated mainly from the flammable organic liquid electrolytes have hindered the commercial use of Li–O_2 batteries. One of the competitive alternatives is polymer electrolytes due to their flexibility and non-flammable property. Moreover, the hybrid polymer electrolyte with enhanced electrochemical properties would be achieved by incorporating inorganic filler, liquid plasticizer and redox mediator into the polymer. While most researches of the hybrid polymer electrolyte focused on Li-ion batteries, few of them took account into its application in Li–O_2 batteries. In this review, we mainly discuss hybrid polymer electrolytes for Li–O_2 batteries with different composition. The critical issues including conductivity and stability of electrolytes are also discussed in detail. Our review provides some insights of hybrid polymer electrolytes for Li–O_2 batteries and offers necessary guidelines for designing the suitable hybrid polymer electrolyte for Li–O_2 batteries as well.
文摘Li-air batteries have received much attention in the past several years because of their large theoretical specific energy density, stable output voltage, cost-effective, energy-efficient and pollution free, and have broad application prospects. If it is successfully developed, the battery could be an excellent energy storage device for renewable energy sources such as wind, solar, and tidal energy, which brings a prospect for human to solve the problem of environment pollution and energy crisis. But the electrolyte is a crucial component of Li-air battery and the electrochemical performance of the battery is determined by electrolyte to a great extent. Due to the react violently between lithium and water, it is not practical for Li-air battery to use directly an aqueous electrolyte unless the anode can be protected from degradation. In this review, we presented the latest research progress on the non-aqueous electrolyte, i.e. organic electrolyte, ionic liquid and solid electrolyte. We elaborated the influence of solvents, and possible additives, and/or their combination Li-air battery’s performance. Finally, we provided insights into the prospect of non-aqueous electrolyte for Li-air battery.
