High sensitivity D-shaped hole fiber temperature sensor based on surface plasmon resonance with liquid filling

A high sensitivity D-shaped hole double-cladding fiber temperature sensor based on surface plasmon resonance(SPR)is designed and investigated by a full-vector finite element method.Within the D-shaped hole doublecladding fiber,the hollow D-section is coated with gold film and then injected in a high thermo-optic coefficient liquid to realize the high temperature sensitivity for the fiber SPR temperature sensor.The numerical simulation results show that the peaking loss of the D-shaped hole double-cladding fiber SPR is hugely influenced by the distance between the D-shaped hole and fiber core and by the thickness of the gold film,but the temperature sensitivity is almost insensitive to the above parameters.When the thermo-optic coefficient is -2.8×10^(-4)∕℃,the thickness of the gold film is 47 nm,and the distance between the D-shaped hole and fiber core is 5μm,the temperature sensitivity of the D-shaped hole fiber SPR sensor can reach to -3.635 nm∕℃.

Structural Analogy for Dynamic Analysis of Liquid Sloshing

The analogy between the wave equation of liquid and the Navier equations of structural elasticity is examined in detail. By introducing appropriate parameters, the structural counterpart of the liquid sloshing model can be easily built. Therefore, the dynamic analysis of liquid sloshing can be reduced to that of structural elasticity, and the existing FEM structural analysis computer programs can be applied to liquid sloshing analysis without any modification. The present method also reveals the internal relationship between liquid sloshing and structural vibration. The effectiveness and reliability of the method is illustrated by the numerical example.

Effect of the Filling Liquid Ratio on the Thermal Performance of a Novel Thermal Diode with Wick

The application of thermal diodes,which allow heat to flow more readily in one direction than the other,is an important way to reduce energy consumption in buildings and enhance the battery heat dissipation of electric vehicles.Depending on various factors including the specific design,materials used,and operating conditions,the convective thermal diode can exhibit the best thermal rectification effect in intended applications compared to the other thermal diodes.In this study,a novel convective thermal diode with a wick was proposed based on the phase change heat transfer mechanism.This design takes advantage of both capillary forces provided by the wick and gravity to achieve enhanced unidirectional heat transfer performance for the designed convective thermal diode.The effect of the filling liquid ratio on the thermal performance of the thermal diode was experimentally investigated,which was in good agreement with the theoretical analysis.The research findings showed that with an optimal liquid filling ratio of 140%,the thermal diode with a wick can achieve a better thermal rectification ratio when subjected to a lower heating power,and the maximum thermal rectification ratio of 21.76 was experimentally achieved when the heating power of the thermal diode was 40 W.

FREE BENDING VIBRATION OF ANNULAR CYLINDRICAL TANK PARTIALLY FILLED WITH LIQUID IN THE CONSIDERATION OF SURFACE WAVE

This paper studies the problem of free bending vibration of annular cylindricaltank partially filled with liquid in the consideration of surface wave.The exactformulae of the mode shape functions and frequencies are deduced.Results can beobtained by means of computer.The analysis shows that the effect of liquid on vibration of annular cylindrical tank is equivalent to different generalized distributivemasses attached to inner and outer cylinders respectively.

Magneto and Electro-Optic Intensity Modulator Based on Liquid Crystal and Magnetic Fluid Filled Photonic Crystal Fiber

We propose a novel light intensity modulator based on magnetic fluid and liquid crystal（LC） filled photonic crystal fibers（PCFs）. The influences of electric and magnetic fields on the transmission intensity are theoretically and experimentally analyzed and investigated. Both the electric and magnetic fields can manipulate the molecular arrangement of LC to array a certain angle without changing the refractive index of the LC. Therefore, light loss in the PCF varies with the electric and magnetic fields whereas the peak wavelengths remain constant. The experimental results show that the transmission intensity decreases with the increase of the electric and magnetic fields. The cut-off electric field is 0.899 V/um at 20 Hz and the cut-off magnetic field is 195 m T. This simple and compacted optical modulator will have a great prospect in sensing applications.

MOLECULAR DYNAMICS SIMULATIONS OF FILLED AND EMPTY CAGE-LIKE WATER CLUSTERS IN LIQUID WATER AND THEIR SIGNIFICANCE TO GAS HYDRATE FORMATION MECHANISMS

Molecular dynamics simulations are performed to observe the evolutions of 512 and 51262 cage-like water clusters filled with or without a methane molecule immersed in bulk liquid water at 250 K and 230 K. The lifetimes of these clusters are calculated according to their Lindemann index δ (t) using the criteria of δ≥0.07. For both the filled and empty clusters, we find the dynamics of bulk water determines the lifetimes of cage-like water clusters, and that the lifetime of 512 62 cage-like cluster is the same as that of 512 cage-like cluster. Although the methane molecule indeed makes the filled cage-like cluster more stable than the empty one, the empty cage-like cluster still has chance to be long-lived compared with the filled clusters. These observations support the labile cluster hypothesis on the formation mechanisms of gas hydrates.

Structure Design of Disposable Ocean Temperature Depth Sensing Probe Based on F-P Cavity and FBG

The basic principle of sensing is the combination of F-P cavity interference and fiber grating reflection. A hybrid structure sensor probe has been designed based on the combination of an F-P cavity of liquid-filled thermometer structure, and a fiber grating with an elastic diaphragm, herein F-P cavity is used for temperature sensing, and the fiber grating is used for pressure sensing. By adopting the dual optical path structure, the dual-parameter detection of temperature and depth is realized, which solves the problem of low accuracy caused by the cross response of temperature and pressure of a single sensor device and the calculation of the depth information of the ocean with empirical formulas. Compared with traditional sensors, the sensitivity is effectively improved. Theoretical analysis shows that the sensitivity of the F-P cavity with a thermometer structure filled with kerosene reaches 1.334 nm/?C, and the depth sensitivity of the fiber grating is 284.6 pm/Mpa within the ocean depth range of 0 - 400 m.

Liquid bridge force between two unequal-sized spheres or a sphere and a plane

Liquid bridge force acting between wet particles is an important property in particle characterization. This paper deals with liquid bridge force between either two unequal-sized spherical particles or a sphere and a flat plate under conditions where gravitational effect arising from bridge distortion is negligible. In order to calculate the force of the liquid bridge efficiently and accurately, expressions of liquid configuration and liquid bridge force were derived by building a mechanical model, which assumes the liquid bridge to be circular in shape between either two unequal-sized spheres or a sphere and a plane. To assess the accuracy of the numerical results of the calculated liquid bridge forces, they were compared to the nuhlished experimental data.

Tunable Photonic Band Gaps In Photonic Crystal Fibers Filled With a Cholesteric Liquid Crystal

A photonic crystal fiber has been filled with a cholesteric liquid crystal. A temperature sensitive photonic band gap effect was observed, which was especially pronounced around the liquid crystal phase transition temperature.

Experimental Research on Thermal Performance of Ultra-Thin Flattened Heat Pipes

Ultra-thin flattened heat pipe(UTHP) is an effective solution to solve the problem of high-power density heat dissipation in narrow space. The key factors that determine its thermal performance include: the shapes and sizes of the UTHP, the wick structure, the type of working fluid and its filling ratio. The change in the filling ratio means not only a change in the amount of the working fluid, but also a change in the space distribution of the gas and liquid phases inside the heat pipe. Therefore, it is important to explore the effect of liquid filling ratio on the thermal performance of UTHP. It can provide effective guidance for the production of UTHP. In this work, experiments were conducted on four groups of UTHPs with different mesh wicks under a series of liquid filling ratios. The results demonstrate that the volume of the filling working fluid should account for 22%-37% of the total internal volume of the UTHP to avoid deterioration of heat transfer during the operation of the UTHP. In addition, a prediction model of the evaporator temperature has been established to provide guidance for the application of UTHPs.

Finite time thermodynamics analysis and research of pulsating heat pipe cold storage device

Phase change energy storage technology can effectively solve the energy mismatch in space and time.There are many disadvantages of phase change materials(PCMs),such as high supercooling,phase separation and poor heat transfer performance.As a new type of heat exchange structure,pulsating heat pipe has the advantages of simple structure,high heat transfer coefficient and good economic behavior.The system efficiency can be greatly improved by using pulsating heat pipe combined with cold storage technology.A set of pulsating heat pipe type cold storage device is developed,the finite time thermodynamic analysis is carried out,and the correlation between heat pipe efficiency and power is established.The three-dimensional physical model of pulsating heat pipe is simulated and verified by experiments.The experimental results show that in the cold storage stage,with the increase of the filling rate,the greater the pressure is,the better the heat transfer effect is;in the cold release stage,with the decrease of the filling rate,the smaller the pressure is,the better the heat transfer effect is.