Liquid propellant rocket engines for a launch vehicle are an essential aerospace technology, representing the advanced level of hi-tech in a country. In recent years, China’s aerospace industry has made remarkable ac...Liquid propellant rocket engines for a launch vehicle are an essential aerospace technology, representing the advanced level of hi-tech in a country. In recent years, China’s aerospace industry has made remarkable achievements, and liquid rocket engine technology has also been effectively developed. In this article, the development processes of China’s liquid rocket engines are discussed. Then, the performance features of China’s new generation liquid rocket engines as well as the flight tests of the new-generation launch vehicles are introduced. Finally, the development direction and the most recent progress of the next generation large-thrust liquid rocket engine is presented.展开更多
Magnetic liquid can produce alternative internal pressure under the alternative high-frequency gradient magnetic field.Because it has higher bulk modulus,the internal pressure results in its volume change.Using piezoe...Magnetic liquid can produce alternative internal pressure under the alternative high-frequency gradient magnetic field.Because it has higher bulk modulus,the internal pressure results in its volume change.Using piezoelectric transducers,the ultrasonic wave generated by the vibration of magnetic liquids can be detected,which shows that the magnetic liquids have the magnetostrictive effect and can generate the ultrasonic vibration under the alternative magnetic gradient field.Some nonmagnetic abrasives and rust-proofing agents can be mixed into the magnetic liquids,under the alternative magnetic field,the abrasives held by magnetic liquids grind the surface of the workpieces,and thus,the finishing for the surface with complex shape,mold cavity and inner wall of tiny tubes can be realized.展开更多
Cu-Zn-Al slurry catalysts were prepared using a complete liquid-phase preparation technology under different heat treatment atmospheres.The catalysts were characterized using X-ray diffraction,X-ray photoelectron spec...Cu-Zn-Al slurry catalysts were prepared using a complete liquid-phase preparation technology under different heat treatment atmospheres.The catalysts were characterized using X-ray diffraction,X-ray photoelectron spectroscope,and N2 adsorption-desorption.Their application in the single-step synthesis of dimethyl ether from syngas was also investigated.The results indicate that the type of heat treatment atmosphere has an influence on the Cu species and the Cu0/Cu+ ratio on the catalyst surface.Moreover,the final Cu/Zn ratio on the catalyst surface is mainly dependent on the composition and reaction environment of the catalyst and less on the type of heat treatment atmosphere.The prepared catalysts can suppress sintering of active sites at high temperatures,and the type of heat treatment atmosphere mainly affects the capability of the catalyst for methanol synthesis.The catalysts perform best using N2 as the heat treatment atmosphere.展开更多
Based on current research,the development trend of reusable liquid rocket engines was analyzed.Key technologies and research focuses of the reusable liquid rocket engine have been analyzed and summarized,and then sugg...Based on current research,the development trend of reusable liquid rocket engines was analyzed.Key technologies and research focuses of the reusable liquid rocket engine have been analyzed and summarized,and then suggestions on the development of future key technologies are proposed.展开更多
The present study dealt with relationships between the degradation and humification process that the organic matter underwent during bacteria-mineral technology. An inverse correlation was found between the protein, l...The present study dealt with relationships between the degradation and humification process that the organic matter underwent during bacteria-mineral technology. An inverse correlation was found between the protein, lipid, and some of the humification indices considered, suggesting that the humification theory is actually humic substances produced from simple-structured natural organic substrates. Weight-average molecular weight (Mw), number-average molecular weight (Mn), and the ratio Mw/Mn of dissolved organic matters at different stages of the process were measured by gel permeation chromatography. The results showed that Mn and Mw increased with reaction time from 352 to 17,191, and from 78,707 to 104,564, respectively. The ratio of Mn/Mw decreased from 223.3 to 6.1. This reflected the growth of the polymerization degree of dissolvable organic matters in the process; furthermore, it indicated the formation of complex molecules (humic substances) from more simple molecules. Bacteria-mineral water (BMW) (the effluent of the process) treatments can exert hormone-like activity for enhanced seed germination of wheat and rice and greatly improved chlorophyll synthesis in wheat and rice leaves, Major polyamines (plant regulators) putrescine, spermidine, and spermine, were found in BMW by a high performance liquid chromatography (HPLC) method, which may explain the hormone-like activity of BMW.展开更多
[Objectives]To optimize the processing technology for roasted licorice with water.[Methods]Through the orthogonal experimental design,taking the water added,moistening time,frying temperature and frying time as the fa...[Objectives]To optimize the processing technology for roasted licorice with water.[Methods]Through the orthogonal experimental design,taking the water added,moistening time,frying temperature and frying time as the factors,and the content of glycyrrhizin and glycyrrhizic acid as the evaluation index,the processing technology for roasted licorice with water was optimized.[Results]The best processing technology of licorice was as follows:Pure licorice slices were mixed with water and moistened for 3 h,and then fried at 160℃for 6 min.20 kg of water was added to every 100 kg of licorice.[Conclusions]The best processing technology for roasted licorice with water was established,laying a foundation for the research and application of roasted licorice with water and its preparation.展开更多
文摘Liquid propellant rocket engines for a launch vehicle are an essential aerospace technology, representing the advanced level of hi-tech in a country. In recent years, China’s aerospace industry has made remarkable achievements, and liquid rocket engine technology has also been effectively developed. In this article, the development processes of China’s liquid rocket engines are discussed. Then, the performance features of China’s new generation liquid rocket engines as well as the flight tests of the new-generation launch vehicles are introduced. Finally, the development direction and the most recent progress of the next generation large-thrust liquid rocket engine is presented.
基金Sponsored by Zhejiang Province Scientific and Technological Key Task Program (2007C21025)Ningbo Science and Technological Key Task Program (2007B10010)
文摘Magnetic liquid can produce alternative internal pressure under the alternative high-frequency gradient magnetic field.Because it has higher bulk modulus,the internal pressure results in its volume change.Using piezoelectric transducers,the ultrasonic wave generated by the vibration of magnetic liquids can be detected,which shows that the magnetic liquids have the magnetostrictive effect and can generate the ultrasonic vibration under the alternative magnetic gradient field.Some nonmagnetic abrasives and rust-proofing agents can be mixed into the magnetic liquids,under the alternative magnetic field,the abrasives held by magnetic liquids grind the surface of the workpieces,and thus,the finishing for the surface with complex shape,mold cavity and inner wall of tiny tubes can be realized.
基金supported by the National Natural Science Foundation of China(No.20706039)the National Basic Research Program(973 Program) of China (No.2005CB221204)+1 种基金the Program for the Top Young Academic Leaders of Higher Learning Institutions of Shanxi of China in 2010the Young Scientific and the Technical Fund of Shanxi of China (No.2006021010)
文摘Cu-Zn-Al slurry catalysts were prepared using a complete liquid-phase preparation technology under different heat treatment atmospheres.The catalysts were characterized using X-ray diffraction,X-ray photoelectron spectroscope,and N2 adsorption-desorption.Their application in the single-step synthesis of dimethyl ether from syngas was also investigated.The results indicate that the type of heat treatment atmosphere has an influence on the Cu species and the Cu0/Cu+ ratio on the catalyst surface.Moreover,the final Cu/Zn ratio on the catalyst surface is mainly dependent on the composition and reaction environment of the catalyst and less on the type of heat treatment atmosphere.The prepared catalysts can suppress sintering of active sites at high temperatures,and the type of heat treatment atmosphere mainly affects the capability of the catalyst for methanol synthesis.The catalysts perform best using N2 as the heat treatment atmosphere.
文摘Based on current research,the development trend of reusable liquid rocket engines was analyzed.Key technologies and research focuses of the reusable liquid rocket engine have been analyzed and summarized,and then suggestions on the development of future key technologies are proposed.
文摘The present study dealt with relationships between the degradation and humification process that the organic matter underwent during bacteria-mineral technology. An inverse correlation was found between the protein, lipid, and some of the humification indices considered, suggesting that the humification theory is actually humic substances produced from simple-structured natural organic substrates. Weight-average molecular weight (Mw), number-average molecular weight (Mn), and the ratio Mw/Mn of dissolved organic matters at different stages of the process were measured by gel permeation chromatography. The results showed that Mn and Mw increased with reaction time from 352 to 17,191, and from 78,707 to 104,564, respectively. The ratio of Mn/Mw decreased from 223.3 to 6.1. This reflected the growth of the polymerization degree of dissolvable organic matters in the process; furthermore, it indicated the formation of complex molecules (humic substances) from more simple molecules. Bacteria-mineral water (BMW) (the effluent of the process) treatments can exert hormone-like activity for enhanced seed germination of wheat and rice and greatly improved chlorophyll synthesis in wheat and rice leaves, Major polyamines (plant regulators) putrescine, spermidine, and spermine, were found in BMW by a high performance liquid chromatography (HPLC) method, which may explain the hormone-like activity of BMW.
文摘[Objectives]To optimize the processing technology for roasted licorice with water.[Methods]Through the orthogonal experimental design,taking the water added,moistening time,frying temperature and frying time as the factors,and the content of glycyrrhizin and glycyrrhizic acid as the evaluation index,the processing technology for roasted licorice with water was optimized.[Results]The best processing technology of licorice was as follows:Pure licorice slices were mixed with water and moistened for 3 h,and then fried at 160℃for 6 min.20 kg of water was added to every 100 kg of licorice.[Conclusions]The best processing technology for roasted licorice with water was established,laying a foundation for the research and application of roasted licorice with water and its preparation.