Self-Healable and Stretchable PAAc/XG/Bi_(2)Se_(0.3)Te_(2.7) Hybrid Hydrogel Thermoelectric Materials

Thermoelectric power generators have attracted increasing interest in recent years owing to their great potential in wearable electronics power supply.It is noted that thermoelectric power generators are easy to damage in the dynamic service process,resulting in the formation of microcracks and performance degradation.Herein,we prepare a new hybrid hydrogel thermoelectric material PAAc/XG/Bi_(2)Se_(0.3)Te_(2.7)by an in situ polymerization method,which shows a high stretchable and self-healable performance,as well as a good thermoelectric performance.For the sample with Bi_(2)Se_(0.3)Te_(2.7)content of 1.5 wt%(i.e.,PAAc/XG/Bi2Se0.3Te27(1.5 wt%)),which has a room temperature Seebeck coefficient of-0.45 mV K^(-1),and exhibits an open-circuit voltage of-17.91 mV and output power of 38.1 nW at a temperature difference of 40 K.After being completely cut off,the hybrid thermoelectric hydrogel automatically recovers its electrical characteristics within a response time of 2.0 s,and the healed hydrogel remains more than 99%of its initial power output.Such stretchable and self-healable hybrid hydrogel thermoelectric materials show promising potential for application in dynamic service conditions,such as wearable electronics.

Frictional contact analysis of a rigid solid with periodic surface sliding on the thermoelectric material

Understanding and characterizing rough contact and wavy surfaces are essential for developing effective strategies to mitigate wear,optimize lubrication,and enhance the overall performance and durability of mechanical systems.The sliding friction contact problem between a thermoelectric(TE)half-plane and a rigid solid with a periodic wavy surface is the focus of this investigation.To simplify the problem,we utilize mixed boundary conditions,leading to a set of singular integral equations(SIEs)with the Hilbert kernels.The analytical solutions for the energy flux and electric current density are obtained by the variable transform method in the context of the electric and temperature field.The contact problem for the elastic field is transformed into the second-kind SIE and solved by the Jacobi polynomials.Notably,the smoothness of the wavy contact surface ensures that there are no singularities in the surface contact stress,and ensures that it remains free at the contact edge.Based on the plane strain theory of elasticity,the analysis primarily examines the correlation between the applied load and the effective contact area.The distribution of the normal stress on the surface with or without TE loads is discussed in detail for various friction coefficients.Furthermore,the obtained results indicate that the in-plane stress decreases behind the trailing edge,while it increases ahead of the trailing edge when subjected to TE loads.

GaInX_3(X=S,Se,Te):Ultra-low thermal conductivity and excellent thermoelectric performance

Seeking intrinsically low thermal conductivity materials is a viable strategy in the pursuit of high-performance thermoelectric materials.Here,by using first-principles calculations and semiclassical Boltzmann transport theory,we systemically investigate the carrier transport and thermoelectric properties of monolayer Janus GaInX_(3)(X=S,Se,Te).It is found that the lattice thermal conductivities can reach values as low as 3.07 W·m^(-1)·K^(-1),1.16 W·m^(-1)·K^(-1)and 0.57 W·m^(-1)·K^(-1)for GaInS_(3),GaInSe_(3),and GaInTe_(3),respectively,at room temperature.This notably low thermal conductivity is attributed to strong acoustic-optical phonon coupling caused by the presence of low-frequency optical phonons in GaInX_(3) materials.Furthermore,by integrating the charac teristics of electronic and thermal transport,the dimensionless figure of merit ZT can reach maximum values of 0.95,2.37,and 3.00 for GaInS_(3),GaInSe_(3),and GaInTe_(3),respectively.Our results suggest that monolayer Janus GaInX_(3)(X=S,Se,Te)is a promising candidate for thermoelectric and heat management applications.

High-entropy alloys in thermoelectric application:A selective review

Since the superior mechanical,chemical and physical properties of high-entropy alloys(HEAs)were discovered,they have gradually become new emerging candidates for renewable energy applications.This review presents the novel applications of HEAs in thermoelectric energy conversion.Firstly,the basic concepts and structural properties of HEAs are introduced.Then,we discuss a number of promising thermoelectric materials based on HEAs.Finally,the conclusion and outlook are presented.This article presents an advanced understanding of the thermoelectric properties of HEAs,which provides new opportunities for promoting their applications in renewable energy.

Low-Cost and Biodegradable Thermoelectric Devices Based on van der Waals Semiconductors on Paper Substrates

We present a method to fabricate handcrafted thermoelectric devices on standard office paper substrates.The devices are based on thin films of WS_(2),Te,and BP(P-type semiconductors)and TiS_(3)and TiS_(2)(N-type semiconductors),deposited by simply rubbing powder of these materials against paper.The thermoelectric properties of these semiconducting films revealed maximum Seebeck coefficients of(+1.32±0.27)mV K^(-1)and(-0.82±0.15)mV K^(-1)for WS_(2)and TiS_(3),respectively.Additionally,Peltier elements were fabricated by interconnecting the P-and N-type films with graphite electrodes.A thermopower value up to 6.11 mV K^(-1)was obtained when the Peltier element were constructed with three junctions.The findings of this work show proof-of-concept devices to illustrate the potential application of semiconducting van der Waals materials in future thermoelectric power generation as well as temperature sensing for low-cost disposable electronic devices.

Control of interfacial reaction and defect formation in Gd/Bi_(2)Te_(2.7)Se_(0.3) composites with excellent thermoelectric and magnetocaloric properties

The method to combine thermoelectric(TE)and magnetocaloric(MC)cooling techniques lies in developing a new material that simultaneously possesses a large TE and good MC cooling performance.In this work,using n-type Bi_(2)Te_(2.7)Se_(0.3)(BTS)as the TE base material and Gd as the second-phase MC material,Gd/BTS composites were prepared by the spark plasma sintering method.In the composites,interfacial reaction between Gd and BTS was identified,resulting in the formation of Gd Te,which has a large impact on the electron concentration through the adjustment of defect concentration.The MC/TE composite containing 2.5 wt%Gd exhibited a ZT value of 0.6 at 300 K,essentially retaining the original TE performance,while all the composites largely maintained the excellent MC performance of Gd.This work provides a potential pathway to achieving high performance in MC/TE composites.

Cascade utilization of full spectrum solar energy for achieving simultaneous hydrogen production and all-day thermoelectric conversion

Solar-driven photocatalytic water/seawater splitting holds great potential for green hydrogen production.However,the practical application is hindered by the relatively low conversion efficiency resulting from the inadequate utilization of solar spectrum with significant waste in the form of heat.Moreover,current equipment struggles to maintain all-day operation subjected to the lack of light during nighttime.Herein,a novel hybrid system integrating photothermal catalytic(PTC)reactor,thermoelectric generator(TEG),and phase change materials(PCM)was proposed and designed(named as PTC-TEG-PCM)to address these challenges and enable simultaneous overall seawater splitting and 24-hour power generation.The PTC system effectively maintains in an optimal temperature range to maximize photothermal-assisted photocatalytic hydrogen production.The TEG component recycles the low-grade waste heat for power generation,complementing the shortcoming of photocatalytic conversion and achieving cascade utilization of full-spectrum solar energy.Furthermore,exceptional thermal storage capability of PCM allow for the conversion of released heat into electricity during nighttime,contributing significantly to the overall power output and enabling PTC-TEG-PCM to operate for more than 12 h under the actual condition.Compared to traditional PTC system,the overall energy conversion efficiency of the PTC-TEG-PCM system can be increased by∼500%,while maintaining the solar-to-hydrogen efficiency.The advancement of this novel system demonstrated that recycling waste heat from the PTC system and utilizing heat absorption/release capability of PCM for thermoelectric application are effective strategies to improve solar energy conversion.With flexible parameter designing,PTC-TEG-PCM can be applied in various scenarios,offering high efficiency,stability,and sustainability.

Investigating the Potential of Quasi-One-Dimensional Organic Crystals of TTT(TCNQ)2 for Thermoelectric Applications

The purpose of this paper is to present the results of investigations on quasi-one-dimensional organic crystals of tetrathiotetracene-tetracyanoquinodi- methane (TTT(TCNQ)2) from the prospective of thermoelectric applications. The calculations were performed after analytical expressions, obtained in the frame of a physical model, more detailed than the model presented earlier by authors. The main Hamiltonian of the model includes the electronic and phonon part, electron-phonon interactions and the impurity scattering term. In order to estimate the electric charge transport between the molecular chains, the physical model was upgraded to the so-called three-dimen- sional (3D) physical model. Numeric computations were performed to determine the electrical conductivity, Seebeck coefficient, thermal conductivity, thermoelectric power factor and thermoelectric figure-of-merit as a function on charge carrier concentrations, temperatures and impurity concentrations. A detailed analysis of charge-lattice interaction, consisting of the exploration of the Peierls structural transition in TCNQ molecular chains of TTT(TCNQ)2 was performed. As result, the critical transition temperature was determined. The dispersion of renormalized phonons was examined in detail.

Recent Progress of Two-Dimensional Thermoelectric Materials

Thermoelectric generators have attracted a wide research interest owing to their ability to directly convert heat into electrical power.Moreover,the thermoelectric properties of traditional inorganic and organic materials have been significantly improved over the past few decades.Among these compounds,layered two-dimensional(2D)materials,such as graphene,black phosphorus,transition metal dichalcogenides,IVA–VIA compounds,and MXenes,have generated a large research attention as a group of potentially high-performance thermoelectric materials.Due to their unique electronic,mechanical,thermal,and optoelectronic properties,thermoelectric devices based on such materials can be applied in a variety of applications.Herein,a comprehensive review on the development of 2D materials for thermoelectric applications,as well as theoretical simulations and experimental preparation,is presented.In addition,nanodevice and new applications of 2D thermoelectric materials are also introduced.At last,current challenges are discussed and several prospects in this field are proposed.

Effects of Magnetization on Thermoelectric Transport Properties of CoSb_(3)Material

The effects of magnetization on the phase composition,microstructure and thermoelectric transport properties of CoSb_(3)were studied systematically.The magnetic properties of CoSb_(3)material were also measured at room temperature in order to confirm its magnetic category.The results of XRD and FESEM analysis indicated that the phase composition and microstructure of the CoSb_(3)were not affected by magnetization.The results of thermoelectric transport measurement showed that the electrical and thermal transport properties of materials were also not affected by magnetization.These results were mainly attributed to the diamagnetism of the CoSb_(3)material,which were consistent with the results of the magnetic properties measurement.This study is expected to provide a special research perspective for studying the effects of the external conditions on the structure and properties of thermoelectric materials.

Enhanced thermoelectric properties of Co_(1-x-y)Ni_(x+y)Sb_(3-x)Sn_x materials

Co1-x-yNix＋ySb3-xSnx polycrystals were fabricated by vacuum melting combined with hot-press sintering. The effect of alloying on the thermoelectric properties of unfilled skutterudite CO1-xNixSb3-xSnx was investigated. A leap of electrical conductivity from the Co0.93Ni0.07Sb2.93Sn0.07 sample to the Co0.88Ni0.12Sb288Sn0.12 sample occurs during the measurement of electrical conductivity, indicating the adjustment of band structure by proper alloying. The results show that alloying enhances the power factor of the materials. On the basis of alloying, the thermoelectric properties of Coo.88Nio.12Sb2.ssSno.12 are improved by Ni-doping. The thermal conductivities of Ni-doping samples have no reduction, but their power factors have obvious enhancement. The power factor of Co0.81Ni0.09Sb2.88Sn0.12 reaches 3.0 mW-m-1·K-2 by Ni doping. The dimensionless thermoelectric figure of merit reaches 0.55 at 773 K for the unfilled Co0.81Ni0.19 Sb2.88Sn0.12,

A Multi-Layered Model for Heat Conduction Analysis of Thermoelectric Material Strip

A multi-layered model for heat conduction analysis of a thermoelectric material strip(TEMs)with a Griffith crack under the electric flux and energy flux load has been developed.The materials parameters of the TEMs vary continuously in an arbitrary manner.To derive the solution,the TEMs is divided into several sub-layers with different material properties.The mixed boundary problem is reduced to a system of singular integral equations,which are solved numerically.The effect of strip width on the electric flux intensity factor and thermal flux intensity factor are studied.

Advances in carbon-based thermoelectric materials for high-performance,flexible thermoelectric devices

Waste energy harvesting can contribute to the increase of the efficiency of many industrial processes,which consume energy to produce valuable products.Among all the wasted energy,heat energy is the most abundant,existing in almost any situation.Thermoelectric devices have the capability to harvest and convert the thermal energy into electrical power via the Seebeck effect.With its simple operating principle,thermoelectric devices can be reliable even under the harshest environments,taking advantage of any type of heat source.As a result,various inorganic and organic materials are being explored as thermoelectric materials.Among the reported materials,carbon-based materials are promising in terms of commericialization,due to their nontoxic and abundant nature,and solution processability.In particular,poly(3,4-ethylenedioxythiophene):polystyrene sulfonate(PEDOT:PSS),carbon nanotubes,and graphene are extensively studied as thermoelectric materials owing to their remarkable thermoelectric performance.Also,organic-inorganic hybrid halide perovskites show the potential to be used as future high-performance thermoelectric materials.Here,the progess in carbon materials as thermoelectrics is reviewed in detail,focusing on four base materials(PEDOT:PSS,carbon nanotubes,graphene,and organic-inorganic hybrid halide perovskites).This review illuminates the potential of carbon-based materials in the field of thermoelectrics and their application to next-generation energy devices.

Thermoelectric properties of p-type (Bi_(0.15)Sb_(0.85))_2Te_3-PbTe graded thermoelectric materials with different barriers

The p-type （Bi0.15Sb0.85）2Te3 and PbTe are typical thermoelectric materials used for low and middle temperature range and functional graded materials （FGM） is an inevitable way to widen the working temperature range. Here two segments graded thermoelectric materials （GTM） consisting of （Bi0.15Sb0.85）2Te3, PbTe and different barriers were fabricated by the common hot pressure method. Metals Fe, Mg and Ni were used as barriers between the two segments. The diffusion of different barriers between the barriers and bases were analyzed by electron microprobe analysis （EMA）. The phase and crystal structures were determined by X-ray diffraction analysis （XRD）. The thermoelectric properties were measured at 303 K along the direction parallel to the pressing direction. The results show that the compositional diffusion occurs when there is no barrier at the interface of the two segments, and the diffusion of Pb is most obvious; as the barrier material, the diffusion of metals Fe, Mg and Ni between different bases is not very obvious, and the thermoelectric properties of GTM is much better than that of the original segment.

Electronic structure engineering in organic thermoelectric materials

Electronic structures, which play a key role in determining electrical and optical properties of π-conjugated organic materials, have attracted tremendous interest. Efficient thermoelectric (TE) conversion of organic materials has rigorous requirements on electronic structures. Recently, the rational design and precise modulation of electronic structures have exhibited great potential in exploring state-of-the-art organic TE materials. This review focuses on the regulation of electronic structures of organic materials toward efficient TE conversion. First, we present the basic knowledge regarding electronic structures and the requirements for efficient TE conversion of organic materials, followed by a brief introduction of commonly used methods for electronic structure characterization. Next, we highlight the key strategies of electronic structure engineering for high-performance organic TE materials. Finally, an overview of the electronic structure engineering of organic TE materials, along with current challenges and future research directions, are provided.

Preparation and Thermoelectric Properties of SiO_2/β-Zn_4Sb_3 Nanocomposite Materials

A series of SiO2/β-Zn4Sb3 core-shell composite particles with 3, 6, 9, and 12 nm of SiO2 shell in thickness were prepared by coatingβ-Zn4Sb3 microparticles with SiO2 nanoparticles formed by hydrolyzing the tetraethoxysilane in alcohol-alkali-water solution. SiO2/β-Zn4Sb3 nanocomposite thermoelectric materials were fabricated with these core-shell composite particles by spark plasma sintering （SPS） method. Microstructure, phase composition, and thermoelectric properties of SiO2/β-Zn4Sb3 nanocomposite thermoelectric materials were systemically investigated. The results show thatβ-Zn4Sb3 microparticles are uniformly coated by SiO2 nanoparticles, and no any phase transformation reaction takes place during SPS process. The electrical and thermal conductivity gradually decreases, and the Seebeck coefficient increases compared to that ofβ-Zn4Sb3 bulk material, but the increment of Seebeck coefficient in high temperature range remarkably increases. The thermal conductivity of SiO2/β-Zn4Sb3 nanocomposite material with 12 nm of SiO2 shell is the lowest and only 0.56 W·m^-1·K^-1 at 460 K. As a result, the ZT value of the SiO2/β-Zn4Sb3 nanocomposite material reaches 0.87 at 700 K and increases by 30%.

Surface contact behavior of functionally graded thermoelectric materials indented by a conducting punch

The contact problem for thermoelectric materials with functionally graded properties is considered.The material properties,such as the electric conductivity,the thermal conductivity,the shear modulus,and the thermal expansion coefficient,vary in an exponential function.Using the Fourier transform technique,the electro-thermoelastic problems are transformed into three sets of singular integral equations which are solved numerically in terms of the unknown normal electric current density,the normal energy flux,and the contact pressure.Meanwhile,the complex homogeneous solutions of the displacement fields caused by the gradient parameters are simplified with the help of Euler’s formula.After addressing the non-linearity excited by thermoelectric effects,the particular solutions of the displacement fields can be assessed.The effects of various combinations of material gradient parameters and thermoelectric loads on the contact behaviors of thermoelectric materials are presented.The results give a deep insight into the contact damage mechanism of functionally graded thermoelectric materials(FGTEMs).

High-performance magnesium-based thermoelectric materials:Progress and challenges

Magnesium-based materials have been regarded as promising candidates for large-scale,high-efficiency thermoelectric applications,owing to their excellent dimensionless figure of merit,high abundance,and low cost.In this review,we comprehensively summarize the recent advances of Mg-based thermoelectrics,including Mg_(2)X(X=Si,Ge,Sn),Mg3(Sb,Bi)_(2),andα-MgAgSb,from both material and device level.Their electrical and thermal transport properties are first elucidated based on the crystallographic characteristics,band structures,and phonon dispersions.We then review the optimization strategies towards higher thermoelectric performance,as well as the device applications of Mg-based thermoelectric materials and the related engineering issues.By highlighting the challenges and possible solutions in the end,this review intends to offer perspectives on the future research work to further enhance the performance of Mg-based materials for practical applications.

Thermoelectric properties of porous (Bi_(0.15)Sb_(0.85))_2Te_3 thermoelectric materials

In order to obtain thermoelectric materials with high figure of merit, theconcept of Hollow (Vacuum) Quantum Structure or Effect and related thermoelectric materials designwere proposed. To demonstrate the theory, the materials of (Bi_(0.15)Sb_(0.85))_2Te_3 with porousstructure have been fabricated. Their thermoelectric properties and the microstructure wereinvestigated and compared with their density structure. It was found that the porous structure couldimprove their properties greatly.

Optimization of p-type Segmented Bi_2Te_3/CoSb_3 Thermoelectric Material Prepared by Spark Plasma Sintering

A kind of p-type segmented Bi2 Te3/CoSB3 thermoetectric material was preparea oy sparse ptasma sintering（ SPS ） . When the segmented materials were used at the temperature ranging from 300 K to 800 K, the junction temperature was optimized, which is about 500 K, and the corresponding length ratio of CoSb3 to Bi2 Te3 is about 15 ： 2. The measured maximum power output of segmented materials is abont 320 W·m^-2, which is about 1.8 times as high as that of monolithic material CoSb3 under the same measuring conditions.