Thermodynamic equilibrium theory-guided design and synthesis of Mg-doped LiFe_(0.4)Mn_(0.6)PO_(4)/C cathode for lithium-ion batteries

Mn-rich LiFe_(1-x)Mn_(x)PO_(4)(x>0.5),which combines the high operation voltage of LiMnPO_(4)with excellent rate performa nce of LiFePO4,is hindered by its sluggish kinetic properties.Herein,thermodynamic equilibrium analysis of Mn^(2+)-Fe^(2+)-Mg^(2+)-C_(2)O_(4)^(2-)-H_(2)O system is used to guide the design and preparation of insitu Mg-doped(Fe_(0.4)Mn_(0.6))_(1-x)Mg_(x)C_(2)O_(4)intermediate,which is then employed as an innovative precursor to synthesize high-performance Mg-doped LiFe_(0.4)Mn_(0.6)PO_(4).It indicates that the metal ions with a high precipitation efficiency and the stoichiometric precursors with uniform element distribution can be achieved under the optimized thermodynamic conditions.Meanwhile,accelerated Li+diffusivity and reduced charge transfer resistance originating from Mg doping are verified by various kinetic characterizations.Benefiting from the contributions of inherited homogeneous element distribution,small particle size,uniform carbon layer coating,enhanced Li+migration ability and structural stability induced by Mg doping,the Li(Fe_(0.4)Mn_(0.6))_(0.97)Mg_(0.03)PO_(4)/C exhibits splendid electrochemical performance.

Unveiling the tailorable electrochemical properties of zeolitic imidazolate framework-derived Ni-doped LiCoO_(2) for lithium-ion batteries in half/full cells

As a prevailing cathode material of lithium-ion batteries(LIBs),LiCoO_(2)(LCO)still encounters the tricky problems of structural collapse,whose morphological engineering and cation doping are crucial for surmounting the mechanical strains and alleviating phase degradation upon cycling.Hereinafter,we propose a strategy using a zeolitic imidazolate framework(ZIF)as the self-sacrificing template to directionally prepare a series of LiNi_(0.1)Co_(0.9)O_(2)(LNCO)with tailorable electrochemical properties.The rational selection of sintering temperature imparts the superiority of the resultant products in lithium storage,during which the sample prepared at 700℃(LNCO-700)outperforms its counterparts in cyclability(156.8 mA h g^(-1)at 1 C for 200 cycles in half cells,1 C=275 mA g^(-1))and rate capability due to the expedited ion/electron transport and the strengthen mechanical robustness.The feasibility of proper Ni doping is also divulged by half/full cell tests and theoretical study,during which LNCO-700(167 mA h g^(-1)at 1 C for 100 cycles in full cells)surpasses LCO-700 in battery performance due to the mitigated phase deterioration,stabilized layered structu re,ameliorated electro nic co nductivity,a nd exalted lithium sto rage activity.This work systematically unveils tailorable electrochemical behaviors of LNCO to better direct their practical application.

Mg-doped,carbon-coated,and prelithiated SiO_(x) as anode materials with improved initial Coulombic efficiency for lithium-ion batteries

Silicon suboxide(SiO_(x),x≈1)is promising in serving as an anode material for lithium-ion batteries with high capacity,but it has a low initial Coulombic efficiency(ICE)due to the irreversible formation of lithium silicates during the first cycle.In this work,we modify SiO_(x) by solid-phase Mg doping reaction using low-cost Mg powder as a reducing agent.We show that Mg reduces SiO_(2) in SiO_(x) to Si and forms MgSiO_(3) or Mg_(2)SiO_(4).The MgSiO_(3) or Mg_(2)SiO_(4) are mainly distributed on the surface of SiO_(x),which suppresses the irreversible lithium-ion loss and enhances the ICE of SiO_(x).However,the formation of MgSiO_(3) or Mg_(2)SiO_(4) also sacrifices the capacity of SiO_(x).Therefore,by controlling the reaction process between Mg and SiO_(x),we can tune the phase composition,proportion,and morphology of the Mg-doped SiO_(x) and manipulate the performance.We obtain samples with a capacity of 1226 mAh g^(–1) and an ICE of 84.12%,which show significant improvement over carbon-coated SiO_(x) without Mg doping.By the synergistical modification of both Mg doping and prelithiation,the capacity of SiO_(x) is further increased to 1477 mAh g^(–1) with a minimal compromise in the ICE(83.77%).

Progress in doping and crystal deformation for polyanions cathode based lithium-ion batteries

Polyanion-based materials are considered one of the most attractive and promising cathode materials for lithiumion batteries(LIBs)due to their good stability,safety,cost-effectiveness,suitable voltages,and minimal environmental impact.However,these materials suffer from poor rate capability and low-temperature performance owing to limited electronic and ionic conductivity,which restricts their practical applicability.Recent developments,such as coating material particles with carbon or a conductive polymer,crystal deformation through the doping of foreign metal ions,and the production of nanostructured materials,have significantly enhanced the electrochemical performances of these materials.The successful applications of polyanion-based materials,especially in lithium-ion batteries,have been extensively reported.This comprehensive review discusses the current progress in crystal deformation in polyanion-based cathode materials,including phosphates,fluorophosphates,pyrophosphates,borates,silicates,sulfates,fluorosilicates,and oxalates.Therefore,this review provides detailed discussions on their synthesis strategies,electrochemical performance,and the doping of various ions.

Homovalent doping:An efficient strategy of the enhanced TiNb_(2)O_(7)anode for lithium-ion batteries

The low energy density,unsatisfied cycling performance,potential safety issue and slow charging kinetics of the commercial lithium-ion batteries restrained their further application in the fields of fast charging and long-haul electric vehicles.Monoclinic TiNb_(2)O_(7)(TNO)with the theoretical capacity of 387 mAh g^(-1)has been proposed as a high-capacity anode materials to replace Li4Ti5O12.In this work,homovalent doping strategy was used to enhance the electrochemical performance of TiNb_(2)O_(7)(TNO)by employing Zr to partial substitute Ti through solvothermal method.The doping of Zr^(4+)ions can enlarge the lattice structure without changing the chemical valence of the original elements,refine and homogenize the grains,improve the electrical conductivity,and accelerate the ion diffusion kinetics,and finally enhance the cycle and rate performance.Specifically,Z0.05-TNO shows initial discharge capacity of as high as 312.2 mAh g^(-1)at 1 C and 244.8 mAh g^(-1)at 10 C,and still maintains a high specific capacity of 171.3 mAh g^(-1)after 800 cycles at 10 C.This study provides a new strategy for high-performance fast-charging energy storage electrodes.

Furfural residues derived nitrogen-sulfur co-doped sheet-like carbon: An excellent electrode for dual carbon lithium-ion capacitors

The state-of-the-art lithium-ion capacitors (LICs),consisting of high-capacity battery-type anode and high-rate capacitor-type cathode,can deliver high energy density and large power density when comparing with traditional supercapacitors and lithium-ion batteries,respectively.However,the ion kinetics mismatch between cathode and anode leads to unsatisfied cycling lifetime and anode degradation.Tremendous efforts have been devoted to solving the abovementioned issue.One promising strategy is altering high conductive hard carbon anode with excellent structural stability to match with activated carbon cathode,assembling dual-carbon LIC.In this contribution,one-pot in-situ expansion and heteroatom doping strategy was adopted to prepare sheet-like hard carbon,while activated carbon was obtained involving activation.Ammonium persulfate was used as expanding and doping agent simultaneously.While furfural residues (FR) were served as carbon precursor.The resulting hard carbon (FRNS-HC) and activated carbon (FRNS-AC)show excellent electrochemical performance as negative and positive electrodes in a lithium-ion battery (LIB).To be specific,374.2 m Ah g^(-1)and 123.1 m Ah g^(-1)can be achieved at 0.1 A g^(-1)and 5 A g^(-1)when FRNS-HC was tested as anode.When combined with a highly porous carbon cathode (S_(BET)=2961 m^(2)g^(-1)) synthesized from the same precursor,the LIC showed high specific energy of147.67 Wh kg^(-1)at approximately 199.93 W kg^(-1),and outstanding cycling life with negligible capacitance fading over 1000 cycles.This study could lead the way for the development of heteroatom-doped porous carbon nanomaterials applied to Li-based energy storage applications.

Sc-doped strontium iron molybdenum cathode for high-efficiency CO_(2)electrolysis in solid oxide electrolysis cell

Solid oxide electrolysis cells(SOECs)can effectively convert CO_(2)into high value-added CO fuel.In this paper,Sc-doped Sr_(2)Fe_(1.5)Mo_(0.3)Sc_(0.2)O_(6−δ)(SFMSc)perovskite oxide material is synthesized via solid-phase method as the cathode for CO_(2)electrolysis by SOECs.XRD confirms that SFMSc exhibits a stable cubic phase crystal structure.The experimental results of TPD,TG,EPR,CO_(2)-TPD further demonstrate that Sc-doping increases the concentration of oxygen vacancy in the material and the chemical adsorption capacity of CO_(2)molecules.Electrochemical tests reveal that SFMSc single cell achieves a current density of 2.26 A/cm^(2) and a lower polarization impedance of 0.32Ω·cm^(2) at 800°C under the applied voltage of 1.8 V.And no significant performance attenuation or carbon deposition is observed after 80 h continuous long-term stability test.This study provides a favorable support for the development of SOEC cathode materials with good electro-catalytic performance and stability.

Improved rate and cycling performances of Na_(3)V_(2)(PO_(4))_(2)F_(2)O by Ti^(3+/4+)doping with two oxidation states for sodium cathodes

Ti at the oxidation states of Ti^(3+)and Ti^(4+),was used to enhance the performance of Na_(3)V_(2)(PO_(4))_(2)F_(2)O by partially substituting vanadium.After doping Ti,the crystallographic volume is decreased due to the less radii of Ti^(3+/4+),and the valence of Ti is demonstrated identical to V.During sodium insertion in Ti-doped Na_(3)V_(2)(PO_(4))_(2)F_(2)O,the two discharge plateaus split into three because of the rearrangement of local redox environment.Consequently,the optimized Na_(3)V_(0.96)Ti_(0.04)(PO_(4))_(2)F_(2)O shows a specific capacity of 123 and 63 mA·h/g at 0.1C and 20C,respectively.After 350 cycles at 0.5C,the capacity is gradually reduced corresponding to a retention of 71.05%.The significantly improved performance is attributed to the rapid electrochemical kinetics,and showcases the strategy of replacing V^(3+/4+)with Ti^(3+/4+)for high-performance vanadium-based oxyfluorophosphates.

Realized stable BP-N at ambient pressure by phosphorus doping

Black-phosphorus-structured nitrogen(BP-N)is an attractive high-energy-density material.However,high-pressure-synthesized BP-N will decompose at low pressure and cannot be quenched to ambient conditions.Finding a method to stabilize it at 0 GPa is of great significance for its practical applications.However,unlike cubic gauche,layered polymeric,and hexagonal layered polymeric nitrogen(cg-N,LP-N,and HLP-N),it is always a metastable phase at high pressures up to 260 GPa,and decomposes into chains at 23 GPa.Here,on the basis of firstprinciples simulations,we find that P-atom doping can effectively reduce the synthesis pressure of BP-N and maintain its stability at 0 GPa.Uniform distribution of P-atom dopants within BP-N layers helps maintain the structural stability of these layers at 0 GPa,while interlayer electrostatic interaction induced by N-P dipoles enhances dynamic stability by eliminating interlayer slipping.Furthermore,pressure is conducive to enhancing the stability of BP-N and its doped forms by suppressing N-chain dissociation.For a configuration with 12.5%doping concentration,a gravimetric energy density of 8.07 kJ/g can be realized,which is nearly twice that of trinitrotoluene.

Design of Voltage Equalization Circuit and Control Method for Lithium-ion Battery Packs

The active equalization of lithium-ion batteries involves transferring energy from high-voltage cells to low-voltage cells,ensuring consistent voltage levels across the battery pack and maintaining safety.This paper presents a voltage balancing circuit and control method.First,a single capacitor method is used to design the circuit topology for energy transfer.Next,real-time voltage detection and control are employed to balance energy between cells.Finally,simulation and experimental results demonstrate the effectiveness of the proposed method,achieving balanced voltages of 3.97 V from initial voltages of 4.10,3.97,and 3.90 V.The proposed circuit is simple,reliable,and effectively prevents overcharge and overdischarge.

Electrospraying Si/SiO_(x)/C and Sn/C nanosphere arrays on carbon cloth for high-performance flexible lithium-ion batteries

Exploring electrode materials with larger capacity,higher power density and longer cycle life was critical for developing advanced flexible lithium-ion batteries(LIBs).Herein,we used a controlled two-step method including electrospraying followed with calcination treatment by CVD furnace to design novel electrodes of Si/Si_(x)/C and Sn/C microrods array consisting of nanospheres on flexible carbon cloth substrate(denoted as Si/Si_(x)/C@CC,Sn/C@CC).Microrods composed of cumulated nanospheres(the diameter was approximately 120 nm)had a mean diameter of approximately 1.5μm and a length of around 4.0μm,distributing uniformly along the entire woven carbon fibers.Both of Si/Si/Si_(x)/C@CC and Sn/C@CC products were synthesized as binder-free anodes for Li-ion battery with the features of high reversible capacity and excellent cycling.Especially Si/Six/C electrode exhibited high specific capacity of about 1750 mA∙h∙g^(−1)at 0.5 A∙g^(−1)and excellent cycling ability even after 1050 cycles with a capacity of 1388 mA∙h∙g^(−1).Highly flexible Si/Si_(x)/C@CC//LiCoO_(2)batteries based on liquid and solid electrolytes were also fabricated,exhibiting high flexibility,excellent electrical stability and potential applications in flexible wearable electronics.

Preparation and electrochemical performance of tantalum-doped lithium titanate as anode material for lithium-ion battery

The electrochemical performance of Ta-doped Li4Ti5O12 in the form of Li4Ti4.95Ta0.05O12 was characterized.X-ray diffraction（XRD） and scanning electron microscopy（SEM） were employed to characterize the structure and morphology of Li4Ti4.95Ta0.05O12.Ta-doping does not change the phase composition and particle morphology,while improves remarkably its cycling stability at high charge/discharge rate.Li4Ti4.95Ta0.05O12 exhibits an excellent rate capability with a reversible capacity of 116.1 mA·h/g at 10C and even 91.0 mA·h/g at 30C.The substitution of Ta for Ti site can enhance the electronic conductivity of Li4Ti5O12 via the generation of mixing Ti4＋/Ti3＋,which indicates that Li4Ti4.95Ta0.05O12 is a promising candidate material for anodes in lithium-ion battery application.

Cobalt Sulfide Confined in N-Doped Porous Branched Carbon Nanotubes for Lithium-Ion Batteries

Lithium-ion batteries(LIBs) are considered new generation of large-scale energy-storage devices.However,LIBs suffer from a lack of desirable anode materials with excellent specific capacity and cycling stability.In this work,we design a novel hierarchical structure constructed by encapsulating cobalt sulfide nanowires within nitrogen-doped porous branched carbon nanotubes(NBNTs)for LIBs.The unique hierarchical Co9S8@NBNT electrode displayed a reversible specific capacity of 1310 mAhg-1 at a current density of 0.1 Ag-1,and was able to maintain a stable reversible discharge capacity of 1109 mAhg-1 at a current density of 0.5 Ag-1 with coulombic efficiency reaching almost 100% for 200 cycles.The excellent rate and cycling capabilities can be ascribed to the hierarchical porosity of the one-dimensional Co9S8@NBNT internetworks,the incorporation of nitrogen doping,and the carbon nanotube confinement of the active cobalt sulfide nanowires offering a proximate electron pathway for the isolated nanoparticles and shielding of the cobalt sulfide nanowires from pulverization over long cycling periods.

Regeneration of Al-doped LiNi_(0.5)Co_(0.2)Mn_(0.3)O_(2) cathode material by simulated hydrometallurgy leachate of spent lithium-ion batteries

A uniform Al-doped LiNi_(0.5)Co_(0.2)Mn_(0.3)O_(2) cathode material was prepared using a coprecipitation method to take advantage of the positive effect of Al on regenerated NCM(Ni,Co,Mn)cathode materials and ameliorate cumbersome and high-cost impurity removal processes during lithium-ion battery recycling.When the Al^(3+) content in the leachate was 1 at.%with respect to the total amount of transition metals(Ni,Co,and Mn),the produced Al-doped NCM cathode material increased concentrations of lattice oxygen and Ni^(2+).The initial specific capacity at 0.1C was 167.4 mA·h/g,with a capacity retention of 79.1%after 400 cycles at 1C.Further,this Al-doped sample showed improved rate performance and a smaller electrochemical impedance.These findings provide a reference for developing industrial processes to resynthesize cathode materials with improved electrochemical performance by incorporating Al^(3+) impurities produced during lithium-ion battery recycling.

Influence of Doping Rare Earth on Performance of Lithium Manganese Oxide Spinels as Cathode Materials for Lithium-Ion Batteries

Some rare earth doping spinel LiMn_(2-x)RE_xO_4 (RE=La, Ce, Nd) cathode materials for lithium ion batteries were synthesized by the solid-state reaction method. The structure characteristics of these produced samples were investigated by XRD, SEM, and particle size distribution analysis. According to the microstructure and charge-discharge testing, the effect of doping rare earth on stabilizing the spinel structure was analyzed. Through a series of doping experiments, it is shown that when the doping content x within the range of 0.01～0.02 the cycle performance of the materials is greatly improved. The discharge capacity of the sample LiMn_(1.98)La_(0.02)O_4, LiMn_(1.98)Ce_(0.02)O_4 and LiMn_(1.98)Nd_(0.02)O_4 remain 119.1, 114.2 and 117.5 mAh·g^(-1) after 50 cycles.

Novel Ag@Nitrogen-doped Porous Carbon Composite with High Electrochemical Performance as Anode Materials for Lithium-ion Batteries

A novel Ag@nitrogen-doped porous carbon(Ag-NPC) composite was synthesized via a facile hydrothermal method and applied as an anode material in lithium-ion batteries(LIBs). Using this method, Ag nanoparticles(Ag NPs) were embedded in NPC through thermal decomposition of Ag NO_3 in the pores of NPC. The reversible capacity of Ag-NPC remained at 852 m Ah g^(-1)after 200 cycles at a current density of 0.1 A g^(-1), showing its remarkable cycling stability. The enhancement of the electrochemical properties such as cycling performance,reversible capacity and rate performance of Ag-NPC compared to the NPC contributed to the synergistic effects between Ag NPs and NPC.

Rare Earth Elements-Doped LiCoO_2 Cathode Material for Lithium-Ion Batteries

Some compounds of LiCo 1- x RE x O 2 (RE=rare earth elements and x =0.01～0.03) were prepared by doping rare earth elements to LiCoO 2 via solid state synthesis. The microstructure characteristics of the LiCo 1- x RE x O 2 were investigated by XRD. It was found that the lattice parameters c are increased and the lattice volumes are enlarged compared to that of LiCoO 2. Moreover, the performance of LiCo 1- x RE x O 2 as the cathode material in lithium ion battery is improved, especially LiCo 1- x Y x O 2 and LiCo 1- x La x O 2. The initial charge/discharge capacities of LiCo 0.99 Y 0.01 O 2 and LiCo 0.99 La 0.01 O 2 are 174/154 (mAh·g -1 ) and 159/149 (mAh·g -1 ) respectively, while those for LiCoO 2 working in the same way are only 139/131 (mAh·g -1 ).

Synthesis and electrochemical properties of Al-doped LiVPO_4F cathode materials for lithium-ion batteries

Al-doped LiVPO4F cathode materials LiAlxV1-xPO4F were prepared by two-step reactions based on a car-bothermal reduction （CTR） process. The properties of the Al-doped LiVPO4F were investigated by X-ray diffraction （XRD）,scanning electron microscopy （SEM）,and electrochemical measurements. XRD studies show that the Al-doped LiVPO4F has the same triclinic structure （space group p-↑1 ） as the undoped LiVPO4F. The SEM images exhibit that the particle size of Al-doped LiVPO4F is smaller than that of the undoped LiVPO4F and that the smallest particle size is only about 1 μm. The Al-doped LiVPO4F was evaluated as a cathode material for secondary lithium batteries,and exhibited an improved reversibility and cycleability,which may be attributed to the addition of Al^3＋ ion by stabilizing the triclinic structure.

Mg doping reduced full width at half maximum of the near-band-edge emission in Mg doped ZnO films

Sol--gol method was employed to synthesize Mg doped ZnO films on Si substrates. The annealing temperature-dependent structure and optical property of the produced samples were studied. An interesting result observed is that increasing Mg concentration in the studied samples induces the full width at half maximum （FWHM） of their near-band-edge （NBE） emission decrease and the defect related emission of the corresponding sample suppresses drastically. The possible mechanism of the observed result is discussed.

Electrochemical and electronic properties of nitrogen doped fullerene and its derivatives for lithium-ion battery applications

We have studied the redox potentials and electronic properties of C60 and C59N using density functional theory method. It is found that doping C60 with one nitrogen atom results in a slight increase in redox potential. Next, we have also studied C59N functionalized with various redox-active oxygen containing functional groups and strongly electron withdrawing functional groups. It is found that the intrinsic electronic structure of the molecule is the major determinant of the redox potential. Our DFT calculations show that the electron affinity to redox potential of functionalized C59N is correlated with the LUMO of the systems very well. This is the first systematic study on the redox properties and electronic structures of N-doped C60 systems.