Experimental research on influence mechanism of loading rates on rock pressure stimulated currents

The study of pressure stimulated current(PSC)changes of rocks is significant to monitor dynamic disasters in mines and rock masses.The existing studies focus on change laws and mechanism of currents generated under the loading of rocks.An electrical and mechanics test system was established in this paper to explore the impacts of loading rates on PSCs.The results indicated that PSC curves of different rocks had different change laws under low/high loading rates.When the loading rate was relatively low,PSC curves firstly changed gently and then increased exponentially.Under high loading rates,PSC curves experienced the rapid increase stage,gentle increase stage and sudden change stage.The compressive strength could greatly affect the peak PSC in case of rock failure.The loading rate was a key factor in average PSC.Under low loading rates,the variations of PSCs conformed to the damage charge model of fracture mechanics,while they did not at the fracture moment.Under high loading rates,the PSCs at low stress didn’t fit the model due to the stress impact effects.The experimental results could provide theoretical basis for the influence of loading rates on PSCs.

Research on the Dynamic Response of Submerged Floating Tunnels to Wave Currents and Traffic Load

Submerged floating tunnel(SFTs)are typically subjected to complex external environmental and internal loads such as wave currents and traffic load.In this study,this problem is investigated through a finite element method able to account for fluid-structure interaction.The obtained results show that increasing the number of vehicles per unit length enhances the transverse vibrational displacements of the SFT cross sections.Under ultimate traffic load condition,one-way and two-way syntropic distributions can promote the dynamic responses of SFTs whereas two-way reverse distributions have the opposite effect.

Modelling dynamic pantograph loads with combined numerical analysis

Appropriate interaction between pantograph and catenary is imperative for smooth operation of electric trains.Changing heights of overhead lines to accommodate level crossings,overbridges,and tunnels pose significant challenges in maintaining consistent current collection performance as the pantograph aerodynamic profile,and thus aerodynamic load changes significantly with operational height.This research aims to analyse the global flow characteristics and aerodynamic forces acting on individual components of an HSX pantograph operating in different configurations and orientations,such that the results can be combined with multibody simulations to obtain accurate dynamic insight into contact forces.Specifically,computational fluid dynamics simulations are used to investigate the pantograph component loads in a representative setting,such as that of the recessed cavity on a Class 800 train.From an aerodynamic perspective,this study indicates that the total drag force acting on non-fixed components of the pantograph is larger for the knuckle-leading orientation rather than the knuckle-trailing,although the difference between the two is found to reduce with increasing pantograph extension.Combining the aerodynamic loads acting on individual components with multibody tools allows for realistic dynamic insight into the pantograph behaviour.The results obtained show how considering aerodynamic forces enhance the realism of the models,leading to behaviour of the pantograph-catenary contact forces closely matching that seen in experimental tests.

Dynamics and stabilization of peak current-mode controlled buck converter with constant current load

The discrete iterative map model of peak current-mode controlled buck converter with constant current load（CCL）,containing the output voltage feedback and ramp compensation, is established in this paper. Based on this model the complex dynamics of this converter is investigated by analyzing bifurcation diagrams and the Lyapunov exponent spectrum. The effects of ramp compensation and output voltage feedback on the stability of the converter are investigated. Experimental results verify the simulation and theoretical analysis. The stability boundary and chaos boundary are obtained under the theoretical conditions of period-doubling bifurcation and border collision. It is found that there are four operation regions in the peak current-mode controlled buck converter with CCL due to period-doubling bifurcation and border-collision bifurcation. Research results indicate that ramp compensation can extend the stable operation range and transfer the operating mode, and output voltage feedback can eventually eliminate the coexisting fast-slow scale instability.

Effects of drive current rise-time and initial load density distribution on Z-pinch characteristics

A two-dimensional, three-temperature radiation magneto-hydrodynamics model is applied to the investigation of evolutional trends in x-ray radiation power, energy, peak plasma temperature and density as functions of drive current rise-time and initial load density distribution by using the typical experimental parameters of tungsten wire-array Z- pinch on the Qiangguang-I generator. The numerical results show that as the drive current rise-time is shortened, x-ray radiation peak power, energy, peak plasma density and peak ion temperature increase approximately linearly, but among them the x-ray radiation peak power increases more quickly. As the initial plasma density distribution in the radial direction becomes gradually flattened, the peak radiation power and the peak ion-temperature almost exponentially increase, while the radiation energy and the peak plasma density change only a little. The main effect of shortening drive current rise-time is to enhance compression of plasma, and the effect of flattening initial load density distribution in the radial direction is to raise the plasma temperature. Both of the approaches elevate the x-ray peak radiation power

Experimental study on bed-load sediment transport under irregular wave and current combined flow

Using an irregularly oscillating tray and flume, a series of experiments are completed to evaluate bed-load sediment transport rate under irregular wave -current coexistent field. Testing conditions include three interaction angles 0', 45', 90' and two kinds of median sizes (0.38 and 1.10 mm). The results of transport rate show that the net sediment transport rate can be expressed approximately as the function of the maximum bottom shear stress of waves, mean shear stress of current and the grain size.

Dynamic Response Analysis of Risers Subjected to Combined Wave and Current Loading

A dynamic response analysis in the frequency domain is presented for risers subjected to combined wave and current loading. Considering the effects of current, a modified wave spectrum is adopted to compute the linearized drag force. An additional drag force convolution term is added to the linearized drag force spectrum, therefore the error is reduced which arises from the truncation of higher order terms in the drag force auto-correlation function. An expression of linearized drag force spectrum is given taking the relative velocity into account. It is found that the additional term is a fold convolution integral. In this paper dynamic responses of risers are investigated, while the influence of floater motion on risers is considered. The results demonstrate that the accuracy of the present method reaches the degree required in time domain analysis.

Numerical Modeling of the Dynamic Response of an Elastoplastic Seabed Under Wave-Current Interactions

Wave-induced liquefaction of the seabed is a geohazard frequently encountered in shallow waters.Although widely discussed,most studies paid attention to the seabed response under a single sequence of wave loading.However,the seabed suffers from repeated‘wave loading–dissipation’phases in a real ocean environment.In this study,a homogeneous sandy seabed model is established to investigate the mechanism of wave-induced liquefaction by considering the existence of currents.Finite element analyses are conducted by incorporating a kinematic hardening elastoplastic model into the commercial package Abaqus.The constitutive model is validated against centrifugal wave tests.Parametric studies are conducted to demonstrate the effects of relative densities,current,and wave-loading history on the seabed response.The predicted excess pore pressure,effective stress paths,and associated variation of relative density are discussed in detail.The results show that the densification of soils significantly enhances the resistance against liquefaction,which provides new insight into the mechanism of residual liquefaction during wave sequences.

Load Shedding Strategy Based on Combined Feed-Forward Plus Feedback Control over Data Streams

In data stream management systems (DSMSs), how to maintain the quality of queries is a difficult problem because both the processing cost and data arrival rates are highly unpredictable. When the system is overloaded, quality degrades significantly and thus load shedding becomes necessary. Unlike processing overloading in the general way which is only by a feedback control (FB) loop to obtain a good and stable performance over data streams, a feedback plus feed-forward control (FFC) strategy is introduced in DSMSs, which have a good quality of service (QoS) in the aspects of miss ratio and processing delay. In this paper, a quality adaptation framework is proposed, in which the control-theory-based techniques are leveraged to adjust the application behavior with the considerations of the current system status. Compared to previous solutions, the FFC strategy achieves a good quality with a waste of fewer resources.

A DISCUSSION ON CURRENTS AND SUSPENDED LOAD TRANSPORT IN SURF ZONE

In this paper, the distribution characteristics of the breaking wave current and suspended load transport in the surf zone are discussed in main. Based on the measured data of the waves, the form of breaking wave, the breaking wave current and the sediment concentration of suspended load in the offshore surf zone near Nouakchott, the Islamic Republic of Mauritania, the author has analized the law governing the distribution of longshore current and sediment concentration of suspended load by means of statistical method, and presented a calculation method for the longshore sediment transport in offshore surf zone.

Analysis of load status and management strategies of main caregivers of patients with malignant tumors of digestive tract

Caregiver load refers to the subjective and objective negative impact of caregivers in the care of patients,and excessive load will have a serious impact on patients and caregivers themselves and can reduce their quality of life.For the main caregivers,it not only needs to care for the patients in life and daily life,but also needs to pay the cost of treatment for the patients,coupled with the need to carry out their own original work,life,etc.excessive life pressure,economic pressure,work pressure,emotional pressure,etc.lead to heavy load of the main caregivers,which can easily cause caregivers to have different degrees of psychological problems,which will cause serious adverse effects on the caregivers themselves and cancer patients,not conducive to the construction of a harmonious family and society.This article analyzes the current situation of primary caregiver burden in patients with gastrointestinal malignant tumors,analyzes its influencing factors,and specifies specific treatment strategies.It is hoped to provide scientific guidance for later related research and application.

A Study on the Load Modeling of Railway Vehicles Using PSCAD/EMTDC Based on MVDC

This paper,the kinetic equation,traction force,and braking force for railway trains are reviewed.In addition,the driving characteristics are interpreted as to how the power of the electric vehicle relates to the weight,speed,track curve,and track gradient of the electric vehicle.The driving characteristics of these trains are analyzed through PSCAD/EMTDC(power systems computer aided design/electromagnetic transients including DC)modeling.

双路电源的主动均流电路系统研究

广泛使用的低成本电源管理芯片或直流电源模块通常并未集成输出均流控制功能,因此不能直接并联输出使用。而使用特殊的电源管理芯片或是额外的均流控制电路会提高电源电路的复杂程度,造成电路成本的提高。针对此应用场景,提出了一种具有主动均流功能的双路电源开关,作为负载开关或电源多路复用器应用于电路之中,利用开关电流的方法均分输出电流,在几乎不增加电路成本的同时对两路电源进行均流。阐述了所提双路电源开关的工作原理与参数设计方法,并通过仿真与实验证明了所提方法的正确性与可行性。

适配变压器全档位切换暂态分析的有载分接开关电路模型构建

有载分接开关(on-loadtap-changer,OLTC)是换流变压器的核心组件,其可靠切换过程关乎换流变的安全。然而目前国内在运特高压换流变用OLTC完全依赖进口,仿真获取OLTC不同运行状态的暂态特性数据是支撑OLTC关键电气参数设计与国产化制造的基础。经典的OLTC模型仅改变变压器变比或仅模拟单级档位切换过程,难以满足全档位电压调整与各级档位暂态特性数据同步获取的需求,导致OLTC设计优化、参数选型及故障分析缺乏足够的仿真数据支持。该文首先以真空OLTC为研究对象建立切换开关和极性开关等效电路模型,根据OLTC复杂的调压功能建立分层控制系统。其次,在PSCAD中搭建交流仿真系统,获取有载调压过程的暂态特性数据波形,与解析计算得到的电压和电流相比误差小于0.2%,证明该模型满足OLTC电磁暂态仿真研究的精度要求。最后,开展循环调压仿真,获得负载电压数据与波形。结果表明:该文提出的OLTC模型能够接收外部控制信号,进行全档位调压与极性转换仿真分析,能够为OLTC的调压研究、故障溯源分析和过渡电阻设计选型等提供基础模型。

地铁车站弱电设备间设备发热量确定方法

介绍了一种地铁车站弱电设备间设备发热量确定新方法,该方法利用弱电设备发热量实测数据与模型预测数据相互验证,可以有效提高弱电设备发热量确定结果的准确性。研究了室内气温、地铁是否运营、设备额定功率和车站类型等因素对设备发热量的影响。研究结果表明:基于间接测量和预测模型的地铁车站弱电设备间设备发热量确定方法可以提高和保障设备发热量计算结果的准确性;室内气温会显著影响设备外表面和围护结构内表面温度及围护结构内表面热流密度,但对设备外表面热流密度的影响较小;地铁是否运营对弱电设备间设备发热量有较大影响,地铁运营期间设备发热量大于非运营期间;设备额定功率对弱电设备间设备发热量峰值有较大影响,车站类型和建筑面积对设备发热量峰值的影响很小。

基于在线特征库的非侵入式负荷特征提取方法

负荷特征是指负荷设备运行过程中具备某种统计规律的特殊标识,而包含负荷特征的数据库则是实现非侵入式负荷监测与分解的基本依据。对于纯阻性负荷设备,研究人员利用其运行状态切换过程中功率产生跃变的特点,可以准确提取相应状态下的负荷特征。然而,对非纯阻性设备,其负荷特征提取存在以下2个问题。问题1)运行状态切换过程中功率变化不显著,无法精准定位状态投切时刻点;问题2)负荷设备存在功率缓变化的运行状态,导致对应状态下的负荷特征不唯一,无法手动提取。为了解决非纯阻性设备负荷特征提取中存在的上述问题,提出一种基于在线特征库的非侵入式负荷特征提取方法,该方法分为2个阶段。第一阶段:基于负荷设备运行过程中的稳态周期电流数组建立在线特征库,通过改进Pearson相似系数构建滑窗函数,得到负荷设备运行时的周期电流数组与在线特征库的相似性,并同步判断在线特征库冗余性,实现负荷设备状态数据分割;第二阶段:计算在线特征库的特征矩阵,对特征矩阵进行K-means聚类分析,融合相似在线特征库,形成负荷设备的状态特征库,从而实现负荷设备特征电流数组的提取。在私人数据集和PLAID数据集上的测试结果证明,所提负荷特征提取方法在不同的用电场景下均有较好的鲁棒性。所提方法可大幅减少负荷特征提取阶段的人工参与,有利于缓解因负荷设备种类过多导致的负荷特征提取烦琐的问题,为后续建立负荷特征数据库提供了便利。

基于栅极限流的SiC MOSFET栅电荷测试方案

SiC MOSFET是一种高性能的电力电子器件,其开通/关断过程中积累/释放的栅电荷Q_(g)对MOSFET的开关速度、功率损耗等参数有重要影响。通常采用在栅极设置恒流源驱动,对时间进行积分的方法来测量Q_(g)。为了降低驱动复杂度,提高测试结果精度和可视性,基于双脉冲测试平台的感性负载回路,改用耗尽型MOSFET限制栅极电流实现恒流充电,对SiC MOSFET进行测试。同时利用反馈电阻将较小的栅极电流信号转换为较大的电压信号。实验结果表明:在误差允许范围(±5%)内该测试方案能较为准确地测得SiC MOSFET的Q_(g),测试结果符合器件规格书曲线。

一种应用于探测的可预测电流模式FSBB电路

探测器的能源供给离不开DC-DC变换器,先进的控制方法能提高工作效率。预测电流模式控制相比于传统的PI控制具有动态响应快、易于进行过流保护等优点,因此被广泛应用到电力电子控制领域。由于控制回路的问题,不能通过计算开环增益的方式对负载波动与输出电压变化的闭环传递函数进行有效地设计。因此,提出了一种在不加前馈控制的情况下,基于预测电流模式控制四开关Buck-Boost(four-switch Buck-Boost,FSBB)变换器补偿器的设计方案,该方法能提升负载动态响应,通过实验数据,证明了该方法的有效性。