Reactive power compensation of an isolated hybrid power system with load interaction using ANFIS tuned STATCOM

This paper presents an adaptive neuro fuzzy interference system （ANFIS） based approach to tune the parameters of the static synchronous compensator （STAT- COM） with frequent disturbances in load model and power input of a wind-diesel based isolated hybrid power system （IHPS）. In literature, proportional integral （PI） based controller constants are optimized for voltage stability in hybrid systems due to the interaction of load disturbances and input power disturbances. These conventional controlling techniques use the integral square error （ISE） criterion with an open loop load model. An ANFIS tuned constants of a STATCOM controller for controlling the reactive power requirement to stabilize the voltage variation is proposed in the paper. Moreover, the interaction between the load and the isolated power system is developed in terms of closed loop load interaction with the system. Furthermore, a comparison of transient responses of IHPS is also presented when the system has only the STATCOM and the static compensation requirement of the induction generator is fulfilled by the fixed capacitor, dynamic compensation requirement, meanwhile, is fulfilled by STATCOM. The model is tested for a 1% step increase in reactive power load demand at t = 0 s and then a sudden change of 3% from the 1% at t = 0.01 s for a 1% step increase in power input at variable wind speed model.

Study on the subgrade deformation under high-speed train loading and water–soil interaction

It is important to study the subgrade characteristics of high-speed railways in consideration of the water–soil coupling dynamic problem,especially when high-speed trains operate in rainy regions.This study develops a nonlinear water–soil interaction dynamic model of slab track coupling with subgrade under high-speed train loading based on vehicle–track coupling dynamics.By using this model,the basic dynamic characteristics,including water–soil interaction and without water induced by the high-speed train loading,are studied.The main factors-the permeability coefficien and the porosity-influencin the subgrade deformation are investigated.The developed model can characterize the soil dynamic behaviour more realistically,especially when considering the influenc of water-rich soil.

A computational platform for considering the effects of aerodynamic and seismic load combination for utility scale horizontal axis wind turbines

The wide deployment of wind turbines in locations with high seismic hazard has led engineers to take into account a more comprehensive seismic design of such structures. Turbine specific guidelines usually use simplified methods and consider many assumptions to combine seismic demand with the other operational loads effecting the design of these structures. As the turbines increase in size and capacity, the interaction between seismic loads and aerodynamic loads becomes even more important. In response to the need for a computational tool that can perform coupled simulations of wind and seismic loads, a seismic module is developed for the FAST code and described in this research. This platform allows engineers working in this industry to directly consider interaction between seismic and other environmental loads for turbines. This paper details the practical application and theory of this platform and provides examples for the use of different capabilities. The platform is then used to show the suitable earthquake and operational load combination with the implicit consideration of aerodynamic damping by estimating appropriate load factors.

Numerical study on wave loads and motions of two ships advancing in waves by using three-dimensional translating-pulsating source

A frequency domain analysis method based on the three-dimensional translating-pulsating （3DTP） source Green function is developed to investigate wave loads and free motions of two ships advancing on parallel course in waves. Two experiments are carried out respectively to mea- sure the wave loads and the free motions for a pair of side-by- side arranged ship models advancing with an identical speed in head regular waves. For comparison, each model is also tested alone. Predictions obtained by the present solution are found in favorable agreement with the model tests and are more accurate than the traditional method based on the three dimensional pulsating （3DP） source Green function. Numer- ical resonances and peak shift can be found in the 3DP pre- dictions, which result from the wave energy trapped in the gap between two ships and the extremely inhomogeneous wave load distribution on each hull. However, they can be eliminated by 3DTP, in which the speed affects the free sur- face and most of the wave energy can be escaped from the gap. Both the experiment and the present prediction show that hydrodynamic interaction effects on wave loads and free motions are significant. The present solver may serve as a validated tool to predict wave loads and motions of two ves- sels under replenishment at sea, and may help to evaluate the hydrodynamic interaction effects on the ships safety in replenishment operation.

Reliability Analysis Based on a Nonlinear Fatigue Damage Accumulation Model

A modified nonlinear fatigue damage accumulation model based on the Manson-Halford theory was presented,and the new model was developed for fatigue life prediction under constant and variable amplitude loading, which took the effects of the load interactions and the phenomenon of material's strength degradation into account. The experimental data of the 30 Cr Mn Si A and the LY-12 cz from literature were used to verify the proposed model. And from the good agreement between the experimental data and predicted results,we can see it clear that the proposed method can be applied to predicting fatigue life under different loadings.

Closed-form solution of beam on Pasternak foundation under inclined dynamic load

The dynamic response of an infinite Euler–Bernoulli beam resting on Pasternak foundation under inclined harmonic line loads is developed in this study in a closed-form solution.The conventional Pasternak foundation is modeled by two parameters wherein the second parameter can account for the actual shearing effect of soils in the vertical direction.Thus,it is more realistic than the Winkler model,which only represents compressive soil resistance.However,the Pasternak model does not consider the tangential interaction between the bottom of the beam and the foundation;hence,the beam under inclined loads cannot be considered in the model.In this study,a series of horizontal springs is diverted to the face between the bottom of the beam and the foundation to address the limitation of the Pasternak model,which tends to disregard the tangential interaction between the beam and the foundation.The horizontal spring reaction is assumed to be proportional to the relative tangential displacement.The governing equation can be deduced by theory of elasticity and Newton’s laws,combined with the linearly elastic constitutive relation and the geometric equation of the beam body under small deformation condition.Double Fourier transformation is used to simplify the geometric equation into an algebraic equation,thereby conveniently obtaining the analytical solution in the frequency domain for the dynamic response of the beam.Double Fourier inverse transform and residue theorem are also adopted to derive the closed-form solution.The proposed solution is verified by comparing the degraded solution with the known results and comparing the analytical results with numerical results using ANSYS.Numerical computations of distinct cases are provided to investigate the effects of the angle of incidence and shear stiffness on the dynamic response of the beam.Results are realistic and can be used as reference for future engineering designs.

Active-reactive scheduling of active distribution system considering interactive load and battery storage

Distributed generation(DG)are critical components for active distribution system(ADS).However,this may be a serious impact on power system due to their volatility.To this problem,interactive load and battery storage may be a best solution.This paper firstly investigates operation characteristics of interactive load and battery storage,including operation flexibility,inter-temporal operation relations and active-reactive power relations.Then,a multi-period coordinated activereactive scheduling model considering interactive load and battery storage is proposed in order to minimize overall operation costs over a specific duration of time.The model takes into accounts operation characteristics of interactive load and battery storage and focuses on coordination between DGs and them.Finally,validity and effectiveness of the proposed model are demonstrated based on case study of a medium-voltage 135-bus distribution system.