Development of multi-functional anchorage support dynamic-static coupling performance test system and its application

In underground engineering with complex conditions,the bolt(cable)anchorage support system is in an environment where static and dynamic stresses coexist,under the action of geological conditions such as high stresses and strong disturbances and construction conditions such as the application of high prestress.It is essential to study the support components performance under dynamic-static coupling conditions.Based on this,a multi-functional anchorage support dynamic-static coupling performance test system(MAC system)is developed,which can achieve 7 types of testing functions,including single component performance,anchored net performance,anchored rock performance and so on.The bolt and cable mechanical tests are conducted by MAC system under different prestress levels.The results showed that compared to the non-prestress condition,the impact resistance performance of prestressed bolts(cables)is significantly reduced.In the prestress range of 50–160 k N,the maximum reduction rate of impact energy resisted by different types of bolts is 53.9%–61.5%compared to non-prestress condition.In the prestress range of 150–300 k N,the impact energy resisted by high-strength cable is reduced by76.8%–84.6%compared to non-prestress condition.The MAC system achieves dynamic-static coupling performance test,which provide an effective means for the design of anchorage support system.

Time-dependent behavior and permeability evolution of limestone under hydro-mechanical coupling

Excessively high pore water pressure presents unpredictable risks to the safety of rock tunnels in mountainous regions that are predominantly composed of limestone. Investigating the creep characteristics and permeability evolution of limestone under varying hydrated conditions is crucial for a better understanding of the delayed deformation mechanisms of limestone rock tunnels. To this end, this paper initially conducts a series of multi-stage triaxial creep tests on limestone samples under varying pore water pressures. The experiment examines how pore water pressure affects limestone’s creep strain, strain rate, long-term strength, lifespan, and permeability, all within the context of hydraulicmechanical(HM) coupling. To better describe the creep behavior associated with pore water pressure, this paper proposes a new nonlinear fractional creep constitutive model. This constitutive model depicts the initial, steady-state, and accelerated phases of limestone’s creep behavior. Finally, the proposed model is applied to the numerical realization of deformation in limestone tunnel, validating the effectiveness of the proposed constitutive model in predicting tunnel’s creep deformation. This research enhances our understanding of limestone’s creep characteristics and permeability evolution under HM coupling, laying a foundation for assessing the longterm stability of mountain tunnels.

Determination method of permafrost table in seasonal frozen soil areas under“Water-Heat-Salt”coupling

The permafrost table is an important index for the design and construction of roads in cold regions,so it is necessary to find a convenient,accurate and fast judgment method to determine the permafrost table.In this study,a three-field coupled model was established based on the hydrothermal salt coupling within the permafrost and the similarity theory,and the changes of the permafrost table under different temperature,moisture and salt conditions were numerically simulated by considering the transient temperature change and the influence of the permafrost layer on the seasonally thawed layer.In addition,an accelerated permafrost table test method was designed based on the time-domain variation and hydrothermal salt coupling by the similarity theory,which rapidly simulated the permafrost table change under different temperatures,moisture,and salts in the natural environment.Comparing the simulation and test results with the measured values in the field,the errors are less than 3%,which verified the feasibility of the method for determining the permafrost table,and the simulated results are better than the test results.Results show that the results of determining the permafrost table with a single index have different degrees of deviation,and the permafrost table obtained by the temperature index is the most accurate in general,and it is more accurate to use the average value of the three indexes as the permafrost table compared with a single index.

Analytical evaluation of steady-state solute distribution in through- diffusion and membrane behavior test under non-perfectly flushing boundary conditions

The through-diffusion and membrane behavior testing procedure using a closed-system apparatus has been widely used for concurrent measurement of diffusion and membrane efficiency coefficients of low-permeability clay-based barrier materials.However,the common assumption of perfectly flushing conditions at the specimen boundaries could induce errors in analyses of the diffusion coefficients and membrane efficiencies.In this study,an innovative pseudo three-dimensional(3D)analytical method was proposed to evaluate solute distribution along the boundary surfaces of the soil-porous disks system,considering the non-perfectly flushing conditions.The results were consistent with numerical models under two scenarios considering different inflow/outflow positions.The proposed model has been demonstrated to be an accurate and reliable method to estimate solute distributions along the bound-aries.The calculated membrane efficiency coefficient and diffusion coefficient based on the proposed analytical method are more accurate,resulting in up to 50%less relative error than the traditional approach that adopts the arithmetic mean value of the influent and effluent concentrations.The retar-dation factor of the clay specimen also can be calculated with a revised cumulative mass approach.Finally,the simulated transient solute transport matched with experimental data from a multi-stage through-diffusion and membrane behavior test,validating the accuracy of the proposed method.

A Metadata Model Based on Coupling Testing Information to Increase Testability of Component

A software component must be tested every time it is reused in order to assure quality of component itself and system in which it is to be integrated.So how to increase testability of component has become a key technology in the software engineering community.Here a method is introduced to increase component testability.And meanings of component testability and relative effective ways to increase testability are summarized.Then definitions of component coupling testing criterion,DU-I(Definition-Use Information) and OP-Vs(Observation-Point Values)are given.Base on these,a definition-use table is introduced,which includes DU-A and OP-Vs item,to help component testers to understand and observe interior details about component under test better.Then a framework of testable component based on above DU-table is given.These facilities provide ways to detect errors,observe state variables by observation-points based monitor mechanism.Moreover,above methods are applied to our application developed by ourselves before,and some test cases are generated.Then our method is compared with Orso method and Kan method using the same example,presenting the comparison results.The results illustrate the validity of our method,effectively generating test cases and killing more mutants.

A well test analysis model of generalized tube flow and seepage coupling

"Generalized mobility"is used to realize the unification of tube flow and seepage in form and the unification of commonly used linear and nonlinear flow laws in form,which makes it possible to use the same form of motion equations to construct unified governing equations for reservoirs of different scales in different regions.Firstly,by defining the generalized mobility under different flow conditions,the basic equation governing fluid flow in reservoir coupling generalized tube flow and seepage is established.Secondly,two typical well test analysis models for coupling tube flow and seepage flow are given,namely,pipe-shaped composite reservoir model and partially open cylindrical reservoir model.The log-log pressure draw-down type-curve of composite pipe-shaped reservoir model can show characteristics of two sets of linear flow.The log-log pressure drawdown plot of partially opened cylindrical reservoir model can show the characteristics of spherical flow and linear flow,as well as spherical flow and radial flow.The pressure build-up derivative curves of the two models basically coincide with their respective pressure drawdown derivative curves in the early stage,pulling down features in the late stage,and the shorter the production time is,the earlier the pulling down feature appears.Finally,the practicability and reliability of the models presented in this paper are verified by three application examples.

Coupling mechanism between mining-induced deformation and permeability of coal

The coupling mechanism between mining-induced mechanical behavior and gas permeability of coal is effectively obtained in laboratory.This study means significant understanding of the prevention of coal-gas outburst.The testing samples of coal were drilled from the 14120 mining face at the depth of690 m.Based on the redistribution of stress during the excavation,the coupling test between mechanical state and seepage has been designed using the triaxial servo-controlled seepage equipment for thermofluid-solid coupling of coal containing methane.It is the result that there are two main factors influencing the mining-induced mechanical behavior of coal,such as the change ofσ_1-σ_3 andΔσ_1-Δσ_3.The failure mode mainly depends on the value ofσ_1-σ_3,and the peak strength value mainly depends on the value ofΔσ_1-Δσ_3.The difference of mechanical response between geostress and mining-induced stress has been obtained,which can be a theoretical support for safe mining such as reasonable gas drainage,prevention of coal-gas outburst and gas over-limit.

Synthesis of Diethyl Oxalate by a Coupling-Regeneration Reaction of Carbon Monoxide

This article describes a process for the synthesis of diethyl oxalate by a coupling reaction of carbon monoxide, catalyzed by palladium in the presence of ethyl nitrite. The kinetics and mechanism of the coupling and regeneration reaction are also discussed. This paper presents the results of a scale-up test of the catalyst and the process based on an a priori computer simulation.

Experimental study on magnetomechanical coupling effect of Q235 steel tubular member specimens

The magnetomechanical coupling tests were performed on Q235 steel tubular model specimens in NIM-2000HF magnetomechanical coupling equipment. The hysteresis loops were obtained in different magnetic fields and stresses. The magnetization curves were also achieved at different stresses. The influence of applied stresses on the hysteresis loops was investigated. The stress sensitive region and linear stress sensitive region of magnetic induction are determined for the model specimen according to the experimental data. The linear dependence relation of magnetic induction versus applied stresses is established, and the optimum magnetic field is determined in the stress sensitive range of magnetic induction, which builds a basis for nondestructive testing (NDT) of stress with the total magnetic flux for steel structure.

Thermal-hydro-mechanical coupling damage model of brittle rock

Based on fluid mechanics, thermodynamics and damage mechanics, thermal-hydro-mechanical(THM) coupling damage model of brittle rock is established by analyzing THM coupling mechanism, where THM coupling damage variable DTHM is dominated by TH coupling damage variable DTH, TM coupling damage variable DTM and HM coupling damage variable DHM, and DTH is firstly expressed in term of dimensionless total thermal conductivity of the water Nu. Permeability test, uni-axial compression test and THM coupling test are conducted to measure the permeability, elastic modulus and THM coupling stress-strain curves of brittle rock. The tested values of THM coupling elastic modulus THME? are in good agreement with the predicted values of THM coupling elastic modulus ETHM, which can verify the newly established THM coupling damage model.

Electrical crosstalk-coupling measurement and analysis for digital closed loop fibre optic gyro

The phase modulation and the closed-loop controller can generate electrical crosstalk-coupling in digital closed- loop fibre optic gyro. Four electrical cross-coupling paths are verified by the open-loop testing approach. It is found the variation of ramp amplitude will lead to the alternation of gyro bias. The amplitude and the phase parameters of the electrical crosstalk signal are measured by lock-in amplifier, and the variation of gyro bias is confirmed to be caused by the alternation of phase according to the amplitude of the ramp. A digital closed-loop fibre optic gyro electrical crosstalk-coupling model is built by approximating the electrical cross-coupling paths as a proportion and integration segment. The results of simulation and experiment show that the modulation signal electrical crosstalk-coupling can cause the dead zone of the gyro when a small angular velocity is inputted, and it could also lead to a periodic vibration of the bias error of the gyro when a large angular velocity is inputted.

Experimental Study on Scouring and Silting Deformation of Artificial Beach Under Storm Surge−Wave Coupling

With the increasing construction of artificial beach in coastal areas, it is of practical significance to study the beach surface deformation of artificial beach profile. Previous studies only focus on a single wave dynamic factor, and it is difficult to predict the beach deformation of artificial beach profile under the storm surge-wave co-action. To solve this problem, the cross-section physical model test method was used to study the beach surface deformation of a typical artificial beach profile in Shuangdao Bay, Weihai, Shandong Province, after continuous wave actions till they stabilize. The characteristics of beach surface deformation under the conditions of constant water levels, laddershaped water level combined with corresponding wave elements and storm surge-wave co-action are compared and analyzed. A beach profile model which satisfies the theory of Bruun model is proposed. The test results show that the maximum scour depth of beach under storm surge-wave co-action is smaller and the scour range is obviously larger than that under the condition of constant water levels or ladder-shaped water level. The evaluation of the maximum scour depth by traditional model test tends to be conservative while the evaluation of the scour range is insufficient.The research results can provide scientific reference for designing artificial beaches.

Development and application of multi-field coupled high-pressure triaxial apparatus for soil

The increasing severity of ground subsidence,ground fissure and other disasters caused by the excessive exploitation of deep underground resources has highlighted the pressing need for effective management.A significant contributing factor to the challenges faced is the inadequacy of existing soil mechanics experimental instruments in providing effective indicators,creating a bottleneck in comprehensively understanding the mechanisms of land subsidence.It is urgent to develop a multi-field and multi-functional soil mechanics experimental system to address this issue.Based soil mechanics theories,the existing manufacturing capabilities of triaxial apparatus and the practical demands of the test system,a set of multi-field coupled high-pressure triaxial system is developed tailored for testing deep soils(at depths of approximately 3000 m)and soft rock.This system incorporates specialized design elements such as high-pressure chamber and horizontal deformation testing devices.In addition to the conventional triaxial tester functions,its distinctive feature encompass a horizontal deformation tracking measuring device,a water release testing device and temperature control device for the sample.This ensemble facilitates testing of horizontal and vertical deformation water release and other parameters of samples under a specified stress conditions,at constant or varying temperature ranging from-40℃–90℃.The accuracy of the tested parameters meets the requirements of relevant current specifications.The test system not only provides scientifically robust data for revealing the deformation and failure mechanism of soil subjected to extreme temperature,but also offers critical data support for major engineering projects,deep exploration and mitigation efforts related to soil deformation-induced disaster.

Experimental Study on Anchoring Physical Properties of Different Anchoring Lengths Coupled with Temperature and Pressure

Aiming at deep roadway anchorage solids, laboratory similar model tests were used to reveal the mechanical properties of anchorage solids with different anchorage lengths under the coupling effect of temperature and pressure, and SPSS statistical analysis software was used to conduct linear regression analysis of the ultimate anchorage force obtained from the tests. The results show that: through multiple linear regression analysis, the influence degree of temperature and pressure coupling on the ultimate anchorage force is arranged in order of anchoring length > surrounding rock strength > temperature > side pressure coefficient, and the linear regression equation of the model is obtained. Compared with the linear regression equation of simulation results, the model has a high explanatory ability.

工程尺度缓冲材料热-水-力多场耦合数值模拟研究

缓冲材料作为填充在废物罐与地质体之间重要的人工屏障,对高放废物处置库的长期安全至关重要。以工程尺度缓冲材料热-水-力多场耦合大型模型试验系统(China-Mock-up)为研究对象,采用有限元数值模拟软件LAGAMINE,考虑试验过程中复杂的边界条件与材料属性,实现了近5 a试验数据的定量模拟。模拟结果可准确预测试验系统内部不同特征点温度随室温周期性波动及线性增长这一动态变化规律;能够较好反映不同特征点相对湿度随时间的行为演化趋势,在加热器附近区域呈现出先干燥后饱和的现象,远离加热器区域则逐渐增大;模拟的总应力与实测试验数据间表现较好地一致性,能够反映试验台架内部不同特征点的总应力随时间逐渐增大这一演化过程。揭示了多场耦合条件下缓冲材料(膨润土)温度、湿度及应力的相互作用关系,为深入认识处置库环境下缓冲材料行为演化特征提供了重要的参考依据。

坡度、疲劳和能见度对隧道火灾人员疏散速度耦合影响研究

为探究隧道火灾复杂环境对人员疏散速度的耦合影响规律,首先对坡度、人体疲劳及能见度3种因素开展疏散试验,获得各单因素对疏散速度的影响规律,并拟合出疏散速度变化公式;其次基于各单因素下速度变化公式,提出多因素耦合影响下隧道火灾人员疏散速度计算方法。研究结果表明:人员上坡疏散速度与坡度线性负相关,下坡疏散速度规律性较弱;长距离疏散时因疲劳导致速度逐渐衰减,在2 km疏散过程中速度衰减峰值达47%,疲劳导致的速度衰减比例与疏散距离线性正相关;能见度较高时其对疏散速度的影响效果不显著,能见度降低至10 m内后开始对疏散速度产生负面作用。研究结果可为隧道疏散设施设计、相关标准规范制定等提供参考,同时为传统疏散速度取值方法提供1个新思路。

联肢弯剪型钢板剪力墙抗震性能试验研究

联肢钢板剪力墙结构是将2片钢板剪力墙通过钢连梁连接形成的抗侧力结构。通过对1榀1/3缩尺的4层联肢弯剪型钢板剪力墙试件进行低周往复加载试验,从滞回曲线、骨架曲线、延性、承载力及刚度退化、耗能能力等方面研究了该结构体系的抗震性能,并且对试件的屈服顺序和变形模式进行了分析。结果表明:联肢钢板剪力墙试件的延性系数达到5.03,承载力退化系数均大于0.96,承载力和刚度退化稳定,等效黏滞阻尼系数达到0.25以上,表明联肢弯剪型钢板剪力墙具有优越的抗震性能。加载过程中,连梁先于墙板发生屈服,墙板先屈曲后屈服,此后柱脚和横梁相继屈服。连梁的引入改变了结构的屈服机制,提高了整体的延性和耗能能力,能够组成多道抗震防线,且试件整体最终也体现出合理的破坏机制。整体侧移曲线呈弯剪变形模式。该试验研究更加贴合实际工程中联肢钢板剪力墙结构的应用情况,为联肢钢板剪力墙结构的进一步研究和应用提供了试验基础。

复杂石墨阵列快速时变热耦合控制方法

为了在高超声速飞行器结构热试验中准确模拟真实服役热环境,用快速时变热耦合控制方法对复杂石墨阵列进行控制.采用热耦合控制方法将瞬态热损失与瞬态黑体辐射量代入控制方程,实时获取试验件的真实热响应状态;研究了结构热试验热载荷典型历程及石墨阵列控制响应特性,设计了基于结构热试验的专家PID控制策略,给出了复杂石墨阵列全历程分段控制参数;研究了石墨阵列的电特性,设计了时变限伏控制策略,提高了石墨阵列的可靠性;设计了一种多温区耦合补偿控制方法,减小了温区间的耦合干扰.结果表明:试验得到的温度曲线与理论计算曲线在快速升温段的最大误差为4.8%,平稳段的最大误差为1.4%,下降段的最大误差为2.3%;有效减小了控制系统的超调量,提高了系统响应速度;使用快速时变热耦合控制方法在某试验中对复杂石墨阵列进行控制,控制误差小于1.2%.

一种新型引磁式磁流变阻尼器研究

针对特定结构限制下磁流变阻尼器工作性能的优化问题,在传统磁流变阻尼器的基础上设计了一种新型引磁式磁流变阻尼器,建立了磁场与流场耦合动力学模型;以输出阻尼力和动态可调系数为优目标函数,基于多目标遗传算法对该型磁流变阻尼器内部活塞进行了优化;建立了多物理场耦合模型并进行了仿真和冲击试验。仿真结果表明:在相同外形尺寸条件下,新型磁流变阻尼器的有效阻尼通道长度为64 mm,相比普通磁流变阻尼器提高了60%;新型磁流变阻尼器的力学特性与动态可调性更加优越,当施加2.0 A电流、活塞运动速度为0.09 m/s时,新型磁流变阻尼器的输出阻尼力为55.9 kN,相比普通磁流变阻尼器(32.4 kN)提高了72.5%;施加不同大小电流时新型磁流变阻尼器的峰值压力与吸能容量均明显高于普通磁流变阻尼器。冲击试验结果表明:当施加2.0 A的电流、冲击速度为2.45 m/s时,相比普通磁流变阻尼器,其峰值压力达到11.64 MPa、峰值压力提高约41%。峰值压力试验结果与仿真结果对比表明:仿真结果和试验结果的趋势是一致的,其相对误差在0.1之内,表明了仿真模型的有效性。

高地应力-化学侵蚀耦合作用下炭质板岩蠕变试验及非线性蠕变损伤模型

为克服高程障碍并降低施工风险,可采用长大隧道穿越崇山峻岭,但这些隧道往往处于深埋高地应力环境,并受到化学侵蚀影响。为了解决此问题,以丽江—香格里拉炭质板岩大变形隧道为研究对象,采用室内试验和理论推导,研究深埋炭质板岩隧道受化学侵蚀作用下的围岩变形特性。在Poyting-Thomson体蠕变体的基础上,根据模型元件的力学特性,叠加了损伤元件、化学损伤元件和非线性元件,提出高地应力-化学侵蚀耦合作用下炭质板岩非线性蠕变损伤本构关系。研究结果表明:1)炭质板岩试样受化学侵蚀影响显著,侵蚀90 d试样所产生的轴向蠕变应变为侵蚀0 d试样的2.02倍,侵蚀60 d试样所产生的径向蠕变为侵蚀0 d试样的1.85倍;2)受侵蚀的炭质板岩试样在三轴压缩状态下破裂以斜向贯通裂隙为主,并产生一定的滑移错动裂隙,且沿轴线的拉伸劈裂破坏受围压作用抑制明显,未产生竖向贯通裂隙。