Method for calculating non-point source pollution distribution in plain rivers

The land area in a river network is divided into certain-scale square cells for the sake of precision, and, based on the physical mechanisms of rainfall-runoff processes and runoff pollution, the non-point source pollution from cells is estimated using the export coefficients of different land use types. The non-point source pollution from a land cell should all go into the closest fiver reach, so it is distributed according to the terrain of the plain river network area and the positions of land cells and river network reaches. A relationship between a single land cell and its pollution-receiving reach can be determined using this system. In view of the above, a spatial distribution model of the rainfall runoff and non-point source pollution in reaches of a plain river network area was established. This model can provide technological support for further research on the dynamic effects of non-point source pollution on water quality.

CALCULATION OF ELASTIC DAMPING CHARACTERISTICS OF ROTOR SUPPORT MADE OF METAL RUBBER MATERIAL UNDER VARIABLE LOADS

A metal rubber（MR） dry friction damper was designed based on the load supported by the rotor. An experimental apparatus for obtaining hysteresis loops of support under the precession load was designed. The elastic-damping characteristics of the ring-shaped MR damper used as a rotor support under variable loads were presented by studying the hysteresis loops of the damper. The vibration rigidity and the energy dissipation coefficient were calculated from the hysteresis loops, based on the description of the deformation process of the MR element with simple structure in a dimensionless coordinating system. The calculation results showed that the energy dissipation coefficient in the inner of MR element and on the boundary between the damper and the frame of the rotor support were approximately equal. The comparison of the hysteresis loops for a precession load and a one-axial load indicated a large difference when the coefficient of the energy dissipation and the stiffness of the MR damper were concerned.

Effects of fundamental structure parameters on dynamic responses of submerged floating tunnel under hydrodynamic loads

This paper investigates the effects of structure parameters on dynamic responses of submerged floating tunnel （SFT） under hydrodynamic loads. The structure parameters includes buoyancy-weight ratio （BWR）, stiffness coefficients of the cable systems, tunnel net buoyancy and tunnel length. First, the importance of structural damp in relation to the dynamic responses of SPT is demonstrated and the mechanism of structural damp effect is discussed. Thereafter, the fundamental structure parameters are investigated through the analysis of SFT dynamic responses under hydrodynamic loads. The results indicate that the BWR of SFT is a key structure parameter. When BWR is 1.2, there is a remarkable trend change in the vertical dynamic response of SFT under hydrodynamic loads. The results also indicate that the ratio of the tunnel net buoyancy to the cable stiffness coefficient is not a characteristic factor affecting the dynamic responses of SFT under hydrodynamic loads.

Numerical evaluation of tandem rotor for highly loaded transonic fan

Transonic tandem rotor was designed for highly loaded fan at a corrected tip speed of 381 m/s and another conventional rotor was designed as a baseline to evaluate the loading superiority of tandem rotor with three-dimensional(3-D) numerical simulation.The aft blade solidity and its impact on total loading level were studied in depth.The result indicates that tandem rotor has potential to achieve higher loading level and attain favorable aerodynamic performance in a wide range of loading coefficient 0.55~0.68,comparing with the conventional rotor which produced a total pressure ratio of 2.0 and loading coefficient of 0.42.

Effects of irregularity and initial stresses on the dynamic response of viscoelastic half-space due to a moving load

The present article deals with the stresses developed in an initially stressed irregular viscoelastic half-space clue to a load moving with a constant velocity at a rough free surface. Expressions for normal and shear stresses are obtained in closed form. The substantial effects of influence parameters, viz., depth （from the free surface）, irregularity factor, maximum depth of irregularity, viscoelastic parameter, horizontal and vertical initial stresses, and frictional coefficient, on normal and shear stresses are investigated. Moreover, comparative study is carried out for three different cases of irregularity, viz., rectangular irregularity, parabolic irregulariW and no irregularity, which is manifested through graphs.