S-wave velocity structure beneath Changbaishan volcano inferred from receiver function

The S wave velocity structure in Changbaishan volcanic region was obtained from teleseismic receiver function modeling. The results show that there exist distinct low velocity layers in crust in volcano area. Beneath WQD station near to the Tianchi caldera the low velocity layer at 8 km depth is 20 km thick with the lowest S-wave velocity about 2.2 km/s At EDO station located 50 km north of Tianchi caldera, no obvious crustal low velocity layer is detected. In the volcanic region, the thickness of crustal low velocity layer is greater and the lowest velocity is more obvious with the distance shorter to the caldera. It indicates the existence of the high temperature material or magma reservoir in crust near the Tianchi caldera. The receiver functions and inversion result from different back azimuths at CBS permanent seismic station show that the thickness of near surface low velocity layer and Moho depth change with directions. The near surface low velocity layer is obviously thicker in south direction. The Moho depth shows slight uplifting in the direction of the caldera located. We con- sider that the special near surface velocity structure is the main cause of relatively lower prominent frequency of volcanic earthquake waveforms recorded by CBS station. The slight uplifting of Moho beneath Tianchi caldera indicates there is a material exchanging channel between upper mantle and magma reservoir in crust.

MULTI-SCALE COHERENT STRUCTURES IN TURBULENT BOUNDARY LAYER DETECTED BY LOCALLY AVERAGED VELOCITY STRUCTURE FUNCTIONS

The time sequence of longitudinal velocity component at different vertical locations in turbulent boundary layer was finely measured in a wind tunnel. The concept of coarse_grained velocity structure functions, which describes the relative motions of straining and compressing for multi_scale eddy structures in turbulent flows, was put forward based on the theory of locally multi_scale average. Based on the consistency between coarse_grained velocity structure function and Harr wavelet transformation,detecting method was presented, by which the coherent structures and their intermittency was identified by multi_scale flatness factor calculated by locally average structure function. Phase_averaged evolution course for multi_scale coherent eddy structures in wall turbulence were extracted by this conditional sampling to educe scheme. The dynamics course of multi_scale coherent eddy structures and their effects on statistics of turbulent flows were studied.

S-wave velocity structure inferred from receiver function inversion in Tengchong volcanic area

Tengchong volcanic area is located near the impinging and underthrust margin of India and Eurasia plates. The volcanic activity is closely related to the tectonic environment. The deep structure characteristics are inferred from the receiver function inversion with the teleseismic records in the paper. The results show that the low velocity zone is influenced by the NE-trending Dayingjiang fault. The S-wave low velocity structure occurs obviously in the southern part of the fault, but unobviously in its northern part. There are low velocity zones in the shallow po-sition, which coincides with the seismicity. It also demonstrates that the low velocity zone is directly related to the thermal activity in the volcanic area. Therefore, we consider that the volcano may be alive again.

Mapping crustal S-wave velocity structure with SV-component receiver function method

In this article, we analyze the characters of SV-component receiver function of teleseismic body waves and its advantages in mapping the S-wave velocity structure of crust in detail. Similar to radial receiver function, SV-component receiver function can be obtained by directly deconvolving the P-component from the SV-component of teleseismic recordings. Our analyses indicate that the change of amplitude of SV-component receiver function against the change of epicentral distance is less than that of radial receiver function. Moreover, the waveform of SV-component receiver function is simpler than the radial receiver function and gives prominence to the PS converted phases that are the most sensitive to the shear wave velocity structure in the inversion. The synthetic tests show that the convergence of SV-component receiver function inversion is faster than that of the radial receiver function inversion. As an example, we investigate the S-wave velocity structure beneath HIA sta-tion by using the SV-component receiver function inversion method.

A multifractal model for linking Lagrangian and Eulerian velocity structure functions

A multifractal model is developed to connect the Lagrangian multifractal dimensions with their Eulerian counterparts. We propose that the characteristic time scale of a Lagrangian quantity should be the Lagrangian time scale, and it should not be the Eulerian time scale which was widely used in previous studies on Lagrangian statistics. Using the present model, we can obtain the scaling exponents of Lagrangian velocity structure functions from the existing data or models of scaling exponents of Eulerian velocity structure functions. This model is validated by comparing its prediction with the results of experiments, direct numerical simulations, and the previous theoretical models. The comparison shows that the proposed model can better predict the scaling exponents of Lagrangian velocity structure functions, especially for orders larger than 6.

The velocity structure of crust and upper mantle in the Wudalianchi volcano area inferred from the receiver function

The Wudalianchi volcano is a modern volcano erupted since the Holocene. Its frequent occurrence of the small earthquake is considered to be indicator of active dormancy volcano. The S wave velocity structure is inferred from the receiver function for the crust and upper mantle of the Wudalianchi volcano area. The results show that the low velocity structure of S wave is widely distributed underneath the volcano area and part of the low-velocity-zone located at shallow depth in the Wudalianchi volcano area. The low velocity structure is related to the seismicity. The Moho interface is not clear underneath the volcano area, which may be regard to be an nec-essary condition for the lava upwelling. Therefore, we infer that the Wudalianchi volcano has the deep structural condition for the volcano activity and may be alive again.

S-wave velocity structure in the SE Tibetan plateau

We use observations recorded by 23 permanent and 99 temporary stations in the SE Tibetan plateau to obtain the S-wave velocity structure along two profiles by applying joint inversion with receiver functions and surface waves. The two profiles cross West Yunnan block （WYB）, the Central Yunnan sub-block （CYB）, South China block （SCB）, and Nanpanjiang basin （NPB）. The profile at -25°N shows that the Moho interface in the CYB is deeper than those in the WYB and the NPB, and the topography and Moho depth have clear correspondence. Beneath the Xiaojiang fault zone （XJF）, there exists a crustal low-velocity zone （LYZ）, crossing the XJF and expanding eastward into the SCB. The NPB is shown to be of relatively high velocity. We speculate that the eastward extrusion of the Tibetan plateau may pass through the XJF and affect its eastern region, and is resisted by the rigid NPB, which has high velocity. This may be the main cause of the crustal thickening and uplift of the topography. In the Tengchong volcanic area, the crust is shown to have alternate high- and low-velocity layers, and the upper mantle is shown to be of low velocity. We consider that the magma which exists in the crust is from the upper mantle and that the complex crustal velocity structure is related to magmatic differentiation. Between the Tengchong volcanic area and the XJF, the crustal velocity is relatively high. Combining these observations with other geophysical evi- dence, it is indicated that rock strength is high and defor- mation is weak in this area, which is why the level of seismicity is quite low. The profile at ~ 23~N shows that the variation of the Moho depth is small from the eastern rigid block to the western active block with a wide range of LVZs. We consider that deformation to the south of the SE Tibetan Plateau is weak.

The Body Wave Velocity Structure in the Upper Crust of Fujian Estimated by Noise Records

In this paper,the dispersion curves of the Rayleigh wave and Love wave were extracted from the seismic noise records of 25 broadband stations of the Fujian Seismic Network, and inverted for the lithosphere velocity structure. Furthermore,the velocity model was verified by the seismic explosion observations. Our results indicate that the resolution of the lithosphere velocity structure obtained by this method is good in the shallow part,but in the deep part,inversion accuracy for the wave velocity structure is low,which is caused mainly by the small inter-station distance chosen in the paper. Thus the wave dispersion curves have high accuracy in the short-period part,but the warp of the wave dispersion curve in long-period part is large. Considering the results from both the noise inversion and the traditional inversion,we finally present a new velocity model,and the theoretical travel time calculated with the new model matches the explosion travel time very well.

A study on deep structure using teleseismic receiver function in Western Yunnan

s Western Yunnan is located at the boundary of collision or underthrusting zone of Eurasian plate and is influenced by many times tectonic movements. With very complex geological environment and tectonic background, it is one of the seismically active areas. In the paper, the teleseismic records were selected from 16 national, local and mo-bile stations, including 4 very-wide-band mobile stations of PASSCAL. And nearly 2 000 receiver functions were extracted. Two measuring lines are 650 km and 450 km, respectively and across some major tectonic units in Western Yunnan. It is indicated that Nujiang might be a seam characterized by underthrusting. The western and eastern boundaries of Sichuan-Yunnan rhombus block, i.e., Honghe and Xiaojiang faults, might be an erection seam or collision belt. Panxi tectonic zone still has the characteristics of continental rift valley, that is, the surface is hollow and the upper mantle is upwarping. The tectonic situation in Western Yunnan is of certain regulation with the interlacing distribution of orogenic zone and seam. The crustal thickness decreases gradually from the north to the south and the S wave velocity is globally lower here.

Characteristic Functional Structure of Infinitesimal Symmetry Transformations for Nonholonomic System

It was proved that velocity-dependent infinitesima l symmetry transformations of nonholonomic systems have a characteristic functio nal structure, which could be formulated by means of an auxiliary symmetry tra nsformation function and is manifestly dependent upon constants of motion of th e system. An example was given to illustrate the applicability of the results.

Crustal structure using receiver function in the east part of A’nyêmaqên suture belt

Twenty broadband seismographs were deployed along Hongyuan, Sichuan to Wuwei, Gansu. 81 teleseismic events were recorded in one year. We computed receiver functions from teleseismic waveform data and obtained S wave velocity structure beneath each station along the profile by using receiver function inversion method. The results revealed that the crustal structure is very complex and crustal average S wave velocity is to be on the low side. Low velocity structure generally exists in the depth range of 10～40 km in the crust between Aba arc fault and northern edge fault of Qinling earth＇s axis and it is a tectonic feature of complex geological process such as ancient A＇nyemaqen Tethys ocean from closing and side colliding to subducted plate exhumed or thrust rock slice lifted. The Moho is about 50 km depth along the profile and is slightly deeper in the south than in the north.

A two-step multi-frequency receiver function inversion method for shallow crustal S-wave velocity structure and its application across the basin-mountain range belts in Northeast China

A shallow crustal velocity structure(above 10 km depth) is essential for understanding the crustal structures and deformation and assessing the exploration prospect of natural resources, and also provides priori information for imaging deeper crustal and mantle structure. Passive-source seismic methods are cost-effective and advantageous for regional-scale imaging of shallow crustal structures compared to active-source methods. Among these passive methods, techniques utilizing receiver function waveforms and/or body-wave amplitude ratios have recently gained prominence due to their relatively high spatial resolution. However, in basin regions, reverberations caused by near-surface unconsolidated sedimentary layers often introduce strong non-uniqueness and uncertainty, limiting the applicability of such methods. To address these challenges, we propose a two-step inversion method that uses multi-frequency P-RF waveforms and P-RF horizontal-to-vertical amplitude ratios. Synthetic tests indicate that our two-step inversion method can mitigate the non-uniqueness of the inversion and enhance the stability of the results. Applying this method to teleseismic data from a linear seismic array across the sedimentary basins in Northeast China, we obtain a high-resolution image of the shallow crustal S-wave velocity structure along the array. Our results reveal significant differences between the basins and mountains. The identification of low-velocity anomalies(<2.8 km s^(-1)) at depths less than 1.0 km beneath the Erlian Basin and less than 2.5 km beneath the Songliao Basin suggests the existence of sedimentary layers. Moreover, the high-velocity anomalies(~3.4–3.8 km s^(-1)) occurring at depths greater than 7 km in the Songliao Basin may reflect mafic intrusions emplaced during the Early Cretaceous. Velocity anomaly distribution in our imaging result is consistent with the location of the major faults, uplifts, and sedimentary depressions, as well as active-source seismic results. This application further validates the effectiveness of our method in constraining the depth-dependent characteristics of the S-wave velocity in basins with unconsolidated sedimentary cover.

High-pressure structure and elastic properties of tantalum single crystal:First principles investigation

Since knowledge of the structure and elastic properties of Ta at high pressures is critical for addressing the recent controversies regarding the high-pressure stable phase and elastic properties, we perform a systematical study on the highpressure structure and elastic properties of the cubic Ta by using the first-principles method. Results show that the initial body-centered cubic phase of Ta remains stable even up to 500 GPa and the high-pressure elastic properties are excellent/y consistent with the available experimental results. Besides, the high-pressure sound velocities of the single- and polycrystals Ta are also calculated based on the elastic constants, and the predications exhibit good agreement with the existing experimental data.

Shear-wave velocity structures of the shallow crust beneath the Ordos and Sichuan Basins from multi-frequency direct P-wave amplitudes in receiver functions

As the two largest cratonic basins in China,the Ordos Basin and the Sichuan Basin are of key importance for understanding the evolutionary history of the Chinese continent.In this study,the shear-wave velocity(V_(S))structures of the shallow crust(depth up to 10 km)beneath the two basins are imaged based on the frequency-dependence of direct P-wave amplitudes in receiver functions.The teleseismic data used in the study came from 160 broadband seismic stations,including permanent and temporary stations.The results show that the V_(S) and the thickness of the sediments in the Ordos Basin and the Sichuan Basin are respectively lower and thicker in the west than in the east.In the Ordos Basin,the shallow crustal V_(S) increases gradually from 2.10 km s^(−1)in the northwest to 2.65 km s^(−1)in the southeast and the thickest sediments are 7–8 km in the northwest and 5 km in the east.In the Sichuan Basin,the shallow crustal V_(S) increases from 2.4 km s^(−1) in the west to 2.7 km s^(−1)in the east and the thickness of the sediments decreases from>7 km in the west to 6 km in the east.The east-west difference of the shallow crustal structures of the two basins may have been controlled by the Cenozoic India-Eurasia collision.The western parts of the basins near the collision have a higher deposition rate,while in the parts inside the basins far from the collision,the V_(S) slowly increases with depth,indicating that these areas have experienced a more uniform deposition process.In addition,both basins are characterized by velocity structures that are higher along the edges and lower inside of the basins.The edges of the basins suffered strong denudation due to the uplifting and deformation influenced by tectonic evolution.The downward gradient of the shear-wave velocity beneath the Ordos Basin is twice that of the Sichuan Basin,which may be caused by the different deposition and denudation rates of the two basins resulting from differences in structural evolution and thermal events.In addition,the northern Ordos Basin exhibits a strong structural horizontal stratification,while the southern part shows obvious lateral variations in the V_(S) structure,both of which may have been affected by the Qilian orogenic event,the collision and assembly of the South China and the North China block,and the lateral extrusion of the Tibetan Plateau.

Influence of Cardiac Structure, Blood Blow, Velocity and Heart Function on Circulating Atrial Natriuretic Peptide and Reninangiotension System

Heart function and plasma atrial natriuretic peptide (ANP).plasma renin actiity(PRA) andangiotensionⅡ(Ang Ⅱ) were examined with echocardiography and radioimmunoassay in patients with dilated cardiomyopathy(DCM),

基于自适应速度趋势函数的约束层速度反演方法

论文研究了复杂构造区初始层速度约束反演问题。首先得出初始层速度模型的精度对偏移速度建模的质量和迭代稳定尤为重要,常规方法在构造复杂区使初始速度模型产生的误差易导致最终偏移速度模型地质意义失真、真实构造特征掩盖等问题。提升初始速度模型与地下地质特征的匹配和精度成为关键。基于此,论文提出了基于自适应速度趋势函数的约束层速度反演方法。在常规方法的基础上,利用复相关法在时间域剖面上获得地质构造的连续性与变化,并将其作为构造响应算子形成针对性的影响域和权重融入速度趋势函数中,使该函数自适应地质构造特征,提升初始速度模型的精度。再通过对基准速度和速度趋势对深度的梯度进行样条拟合,构建趋势函数的全局高频异常约束,有效预防在构造突变区产生异常高频,进一步增强算法的稳健和可靠性。理论模型和实际数据的测试,验证了本文方法的有效性,反演得到的层速度模型更符合地质规律,并能更好地解决构造复杂区层速度模型的连续性问题,有利于提高复杂构造叠前深度偏移成像精度。

长江中下游铜陵矿集区深部地壳结构——来自宽频地震P波接收函数成像的证据

铜陵矿集区位于长江中下游成矿带中部,自中生代以来经历了大规模构造变形和岩浆活动。矿集区地壳结构对于认识华南—华北板块的碰撞过程,以及长江中下游成矿带乃至整个华南中生代成矿的动力学过程都具有重要意义。本文利用26个宽频地震台站记录的49个远震事件,通过P波接收函数成像方法获取了长江中下游成矿带铜陵矿集区的地壳结构。结果显示,地壳浅部存在一个深度2~3 km的速度不连续界面,可能是浅部盖层与基底之间的分界面。在铜陵南部的蛤蟆岭地区,该界面向永村桥背斜两翼有加深趋势。铜陵地区Moho面深度约为29~32 km,横向略有变化,且有一定厚度,表明Moho面可能是速度逐渐增加的“过渡带”。地壳平均纵横波速比约为1.79,相对较高,说明该地区地壳基性成分较高。该区较薄的地壳厚度和较高的波速比,表明铜陵地区经历过地壳减薄和底侵过程。我们认为长江中下游中生代大规模岩浆作用可能与上地幔物质上涌并底侵到下地壳的过程有关。

Crust and uppermost mantle structure of the Ailaoshan-Red River fault from receiver function analysis

S-wave velocity structure beneath the Ailaoshan-Red River fault was obtained from receiver functions by using teleseismic body wave records of broadband digital seismic stations. The average crustal thickness, Vp/Vs ratio and Poisson’s ratio were also estimated. The results indicate that the interface of crust and mantle beneath the Ailaoshan-Red River fault is not a sharp velocity discontinuity but a characteristic transition zone. The velocity increases relatively fast at the depth of Moho and then increases slowly in the uppermost mantle. The average crustal thickness across the fault is 36―37 km on the southwest side and 40―42 km on the northeast side, indicating that the fault cuts the crust. The relatively high Poisson’s ratio (0.26―0.28) of the crust implies a high content of mafic materials in the lower crust. Moreover, the lower crust with low velocity could be an ideal position for decoupling between the crust and upper mantle.

Lithospheric structure beneath Ordos Block and surrounding areas from joint inversion of receiver function and surface wave dispersion

Ordos Block has undergone rapid uplift,and a series of rift basins have been formed around the block since the Cenozoic,but the formation mechanisms remain controversial.A high-resolution 3 D velocity structure of crust and mantle is important for understanding the lithospheric deformation and deep dynamic process.A here we present a 3 D S-wave velocity structure of the crust and upper mantle in the Ordos Block and surrounding regions by joint inversion of receiver functions and surface wave data from a dense broadband seismic deployment.The lithosphere of the Ordos Block exhibits an obvious highvelocity anomaly.In the east and north of the Ordos and the southwestern part of the Tibetan Plateau,obvious low-velocity anomalies are detected in the upper mantle and extend into the Ordos.The lithosphere of the Ordos Block is thick in the center and thin at the edge,while the crust is relatively thin in the center and thick in the southwest and northeast.The crustal thickness of the tensional basin in the north is greater than that in the central Ordos.We suggest that the outward expansion of the mantle thermal materials in eastern Tibet and the upper mantle thermal upwelling in the eastern part of the North China Craton lead to the non-uniform lithospheric thinning,temperature rise and density reduction of the Ordos Block.The additional buoyancy and thermodynamic effects provided by them contributed to the continuous uplift of the Ordos Block since the Cenozoic.Influenced by the extrusion of Tibetan Plateau,the crustal thickening and rapid uplift occur in the southwestern and northern parts of the Ordos Block.The lithospheric structures of the Alxa and Ordos Blocks are different,and they may belong to different independent blocks before the Mesozoic.

PIV空间分辨率对湍流多点统计量测量的影响

粒子图像测速(Particle Image Velocimetry,PIV),尤其是平面PIV,因其技术成熟且能提供瞬时流场,被广泛应用于湍流统计特性实验研究。PIV测量的空间分辨率(实验测量中所能解析的最小流场尺度,由图像处理时问询域窗口大小决定)不能准确分辨湍流中的小尺度运动,导致PIV测量获得的湍流多点统计量的定量信息(如速度结构函数、湍流耗散率等)包含一定误差。为定量分析这一误差,本文采用空间滤波模型模拟PIV测量对单点速度矢量的作用,进而推导出PIV测得的速度结构函数及湍流耗散率随滤波尺度的变化规律。为检验该模型,通过模拟示踪粒子在基于均匀各向同性湍流直接数值模拟(DNS)得到的湍流速度场中的运动及PIV系统对其的成像,获得了计算合成的PIV粒子图像,采用标准PIV算法对该图像进行处理,获得了速度场并计算得到了相关的湍流统计量,将其与基于真实DNS数据计算得到的统计量对比,获得了定量的误差信息,并与模型的预测结果进行了对比。研究结果表明:本文建立的模型反映了PIV测量中空间分辨率对湍流统计量的影响。在冯·卡门旋流系统产生的近似均匀各向同性流场中进行了平面PIV测量,针对测量得到的速度结构函数与K41理论结果的误差,采用基于本文模型得到的结论进行了分析与校正。本文工作为PIV测量得到的湍流统计量(尤其是小尺度多点统计量)给出了一个基于理论指导的修正方案。