Photo-responsive droplet manipulation slippery lubricant-infused porous surface with ultra-high durability

Photo-responsive slippery lubricant-infused porous surface(SLIPS) for droplet manipulation is flexible, noncontact and non-destructive in droplet manipulation, which has promising applications in flexible robotics, microfluidics,biomedicine, and chemical analysis. However, the repeated manipulations for droplets of SLIPSs are quite limited in the works reported so far, the poor durability of droplet manipulation severely limits the practical application of the surfaces. In this paper, an Fe3O4-doped polydimethylsiloxane(PDMS)-based SLIPS is proposed and implemented to achieve ultra-high repeated droplet manipulation numbers under near-infrared ray(NIR) laser irradiation. Firstly, a micron columnar array structure with micro-pits on the top side, as well as, a wall structure out of the array is designed on SLIPS to reserve the lubricant. Secondly, the prototype of the SLIPS is fabricated by a 3-step ultraviolet(UV) lithography, and subsequently immersed in silicone oil for more than 96 h to obtain the ultra-high durability slippery lubricant-infused porous surface(UD-SLIPS). With a power of 25 m W–85 m W NIR laser, the repeated manipulation of microdroplets(≤ 5 μL) in the scale of 1 cm can exceed more than 3000 times which is far beyond that in previous reports. Finally, the droplet manipulation performance of this photo-responsive UD-SLIPS and the influence of infusion time on durability are investigated. The mechanism of the PDMS swelling effect is found to be the key factor in improving the droplet manipulation durability of SLIPS. The findings of this work would be of great significance for the development of highly durable photo-responsive functional surfaces for droplet manipulation.

A Simple Monte Carlo Method for Locating the Three-dimensional Critical Slip Surface of a Slope

Based on the assumption of the plain-strain problem, various optimization or random search methods have been developed for locating the critical slip surfaces in slope-stability analysis, but none of such methods is applicable to the 3D case. In this paper, a simple Monte Carlo random simulation method is proposed to identify the 3D critical slip surface. Assuming the initial slip to be the lower part of a slip ellipsoid, the 3D critical slip surface is located by means of a minimized 3D safety factor. A column-based 3D slope stability analysis model is used to calculate this factor. In this study, some practical cases of known minimum safety factors and critical slip surfaces in 2D analysis are extended to 3D slope problems to locate the critical slip surfaces. Compared with the 2D result, the resulting 3D critical slip surface has no apparent difference in terms of only cross section, but the associated 3D safety factor is definitely higher.

Reliability analysis of slopes considering spatial variability of soil properties based on efficiently identified representative slip surfaces

Slope reliability analysis considering inherent spatial variability(ISV)of soil properties is timeconsuming when response surface method(RSM)is used,because of the"curse of dimensionality".This paper proposes an effective method for identification of representative slip surfaces(RSSs)of slopes with spatially varied soils within the framework of limit equilibrium method(LEM),which utilizes an adaptive K-means clustering approach.Then,an improved slope reliability analysis based on the RSSs and RSM considering soil spatial variability,in perspective of computation efficiency,is established.The detailed implementation procedure of the proposed method is well documented,and the ability of the method in identifying RSSs and estimating reliability is investigated via three slope examples.Results show that the proposed method can automatically identify the RSSs of slope with only one evaluation of the conventional deterministic slope stability model.The RSSs are invariant with the statistics of soil properties,which allows parametric studies that are often required in slope reliability analysis to be efficiently achieved with ease.It is also found that the proposed method provides comparable values of factor of safety(FS)and probability of failure(Pf)of slopes with those obtained from direct analysis and lite rature.

Imperialistic Competitive Algorithm:A metaheuristic algorithm for locating the critical slip surface in 2-Dimensional soil slopes

In this study, Imperialistic Competitive Algorithm（ICA） is utilized for locating the critical failure surface and computing the factor of safety（FOS） in a slope stability analysis based on the limit equilibrium approach. The factor of safety relating to each trial slip surface is calculated using a simplified algorithm of the Morgenstern-Price method, which satisfies both the force and the moment equilibriums. General slip surface is considered non-circular in this study that is constituted by linking random straight lines.To explore the performance of the proposed algorithm, four benchmark test problems are analyzed. The results demonstrate that the present techniques can provide reliable, accurate and efficient solutions for locating the critical failure surface and relating FOS. Moreover, in contrast with previous studies the present algorithm could reach the lower value of FOS and reached more exact solutions.

Partial slip effect on non-aligned stagnation point nanofluid over a stretching convective surface

The present study inspects the non-aligned stagnation point nano fluid over a convective surface in the presence of partial slip. Two types of base fluids namely water and kerosene are selected with Cu nanoparticles. The governing physical problem is presented and transformed into a system of coupled nonlinear differential equations using suitable similarity transformations. These equations are then solved numerically using midpoint integration scheme along with Richardson extrapolation via Maple. Impact of relevant physical parameters on the dimensionless velocity and temperature profiles are portrayed through graphs. Physical quantities such as local skin frictions co-efficient and Nusselt numbers are tabularized.It is detected from numerical computations that kerosene-based nano fluids have better heat transfer capability compared with water-based nanofluids. Moreover it is found that water-based nanofluids offer less resistance in terms of skin friction than kerosene-based fluid. In order to authenticate our present study, the calculated results are compared with the prevailing literature and a considerable agreement is perceived for the limiting case.

A Method Combining Numerical Analysis and Limit Equilibrium Theory to Determine Potential Slip Surfaces in Soil Slopes

This paper describes a precise method combining numerical analysis and limit equilibrium theory to determine potential slip surfaces in soil slopes. In this method, the direction of the critical slip surface at any point in a slope is determined using the Coulomb’s strength principle and the extremum principle based on the ratio of the shear strength to the shear stress at that point. The ratio, which is considered as an analysis index, can be computed once the stress field of the soil slope is obtained. The critical slip direction at any point in the slope must be the tangential direction of a potential slip surface passing through the point. Therefore, starting from a point on the top of the slope surface or on the horizontal segment outside the slope toe, the increment with a small distance into the slope is used to choose another point and the corresponding slip direction at the point is computed. Connecting all the points used in the computation forms a potential slip surface exiting at the starting point. Then the factor of safety for any potential slip surface can be computed using limit equilibrium method like Spencer method. After factors of safety for all the potential slip surfaces are obtained, the minimum one is the factor of safety for the slope and the corresponding potential slip surface is the critical slip surface of the slope. The proposed method does not need to pre-assume the shape of potential slip surfaces. Thus it is suitable for any shape of slip surfaces. Moreover the method is very simple to be applied. Examples are presented in this paper to illustrate the feasibility of the proposed method programmed in ANSYS software by macro commands.

Improved genetic algorithm freely searching for dangerous slip surface of slope

Based on the slice method of the non-circular slip surface for the calculation of integral stability of slope, an improved genetic algorithm was proposed, which can freely search for the most dangerous slip surface of slope and the corresponding minimum safety factor without supposing the geometric shape of the most dangerous slip surface. This improved genetic algorithm can simulate the genetic evolution process of organisms and avoid the local minimum value compared with the classical methods. The results of engineering cases show that it is a global optimal algorithm and has many advantages, such as higher efficiency and shorter time than the simple genetic algorithm.

Seismic stability analysis of slopes with pre-existing slip surfaces

In analyzing seismic stability of a slope with upper bound limit analysis method, the slip surface is often assumed as a log-spiral or plane slip surface. However, due to the presence of a weak layer and unfavorable geological structural surface or a bedrock interface with overlying soft strata, the preexisting slip surface of the slope may be irregular and composed of a series of planes rather than strictly logspiral or plane shape. A computational model is developed for analyzing the seismic stability of slopes with pre-existing slip surfaces. This model is based on the upper bound limit analysis method and can consider the effect of anchor bolts. The soil or rock is deemed to follow the Mohr-Coulomb yield criterion. The slope is divided into multiple block elements along the slip surface. According to the displacement compatibility and the associated flow rule, a kinematic velocity field of the slope can be obtained computationally. The proposed model allows not only calculation of the rate of external work owing to the combined effect of self-weight and seismic loading, but also that of the energy dissipation rate caused by the slip surface, interfaces of block elements and anchorage effect of the anchors. Considering a direct relationship between the rate of external work and the energy dissipation rate, the expressions of yield acceleration and permanent displacement of anchored slopes can be derived. Finally, the validity of this proposed model is illustrated by analysis on three typical slopes. The results showed that the proposed model is more easily formulated and does not need to solve complex equations or time consuming iterations compared with previous methods based on the conditions of force equilibrium.

Evaluation of the possible slip surface of a highly heterogeneous rock slope using dynamic reduction method

A new method, the dynamic reduction method(DRM) combined with the strain-softening method, was applied to evaluate the possible slip surface of a highly heterogeneous rock slope of the Dagangshan hydropower station in Southwest China.In DRM, only the strength of the failure elements is reduced and the softening reduction factor K is adopted to calculate the strength parameters. The simulation results calculated by DRM show that the further slip surface on the right slope of the Dagangshan hydropower station is limited in the middle part of the slope, while both SRM(strength reduction method) and LEM(limit equilibrium method) predict a failure surface which extends upper and longer. The observations and analysis from the three recorded sliding events indicate that the failure mode predicted by DRM is more likely the scenario.The results in this study illustrate that for highly heterogeneous slopes with geological discontinuities in different length scales, the proposed DRM can provide a reliable prediction of the location of the slip surface.

Recent advances in slippery liquid-infused surfaces with unique properties inspired by nature

The slippery liquid-infused porous surface(s)(SLIPS)that imitates the Nepenthes pitcher plant has proven to be highly versatile and can be combined with various surface characteristics such as dynamic response,antifouling,selective adhesion,and optical/mechanical tunability.In addition,the introduction of a lubricating fluid layer also gives it extremely low contact angle hysteresis and self-repairing properties,which further expands its application range.Currently,SLIPS has been proven to be suitable for many frontier fields such as aerospace,communications,biomedicine,and microfluidic manipulation.In this review,we explain the theoretical background of SLIPS and the preparation methods currently available,including the choice of substrate materials and lubricants,and we discuss the design parameters of the liquid injection surface and how to deal with the consumption of lubricants in practical applications.In addition,the paper focuses on current and potential applications,such as preventing pathogen contamination of and blood adhesion of medical equipment,manipulation of tiny droplets,and directional transportation of liquids.Finally,some weaknesses that appear when SLIPS is used in these applications are pointed out,which provides a new perspective for the development of SLIPS in the future.

Determination of Slip Length in Couette Flow Based on an Analytical Simulation Incorporating Surface Interaction

An analytical simulation based on a new model incorporating surface interaction is conducted to study the slip phenomenon in the Couette flow at different scales. The velocity profile is calculated by taking account of the micro-force between molecules and macro-force from the viscous shearing effect, as they contribute to the achieve- ment of the slip length. The calculated results are compared with those obtained from the molecular dynamics simulation, showing an excellent agreement. Further, the effect of the shear rate on the slip is investigated. The results can well predict the fluid flow behaviors on a solid substrate, but has to be proved by experiment.

液体润滑浸渍表面(SLIPS)船舶防污涂层最新研究进展

综述了近3年来关于液体润滑浸渍表面(SLIPS)船舶防污涂层的研究进展,特别是润滑液的选择与涂层的结构设计,以及这些因素如何影响涂层的整体性能,以期为未来的研究提供最新思路及研究方法。

Segmentations of active normal dip-slip faults around Ordos block according to their surface ruptures in historical strong earthquakes

From the results of researches of active faults in resent years, a correlation analysis between segments of the faults according to surface ruptures in nine historical strong earthquakes occurring in downfaulted system and active structures around Ordos block is conducted in paper. The result shows that there is a good correlation between them, except few individual data that have more uncertain parameters. It shows that intensity and segments of surface ruptures in these strong earthquakes are intrinsically related with the active structures. These strong earthquakes produced stable and unstable rupture boundaries of characteristic-earthquake type and successive occurrence of strong earthquakes on the different boundary faults in the same tectonic unit.

ANALYSIS OF DYNAMIC INSTABILITY OF INTERFACIAL SLIP WAVES BASED ON THE SURFACE IMPEDANCE TENSOR

A new method relying on the Stroh formulism and the theory of the surface impedance tensor was developed to investigate the dynamic instability of interfacial slip waves.The concept of the surface impedance tensor was extended to the case where the wave speed is of a complex value,and the boundary conditions at the frictionally contacting interface were expressed by the surface impedance tensor.Then the boundary value problem was transformed to searching for zeroes of a complex polynomial in the unit circle.As an example,the steady frictional sliding of an elastic half-space in contact with a rigid flat surface was considered in details.A quartic complex characteristic equation was derived and its solution behavior in the unit circle was discussed.An explicit expression for the instability condition of the interfacial slip waves was presented.

Yield surfaces of fcc crystals with crystallographic slip and mechanical twinning

The mixed yield surfaces of fcc single crystals for slip on ｛111｝〈110〉 and mechanical twinning on ｛111｝〈112〉 systems have been derived when their critical resolved shear stresses are equal. It has been found that there are 259 stress states that can be classified into 21 groups according to the crystal symmetry. Each group activates 5, 6 or 8 slip or/and twinning systems depending on crystallographically non equivalent slip or/and twinning systems groups. Among all those stress states, 3 groups activate 8 systems, including 21 stress states; 9 groups activate 5 systems, including 70 ones; the remaining 9 groups activate 5 systems, including 168 ones.

Hydrothermal performance analysis of various surface roughness configurations in trapezoidal microchannels at slip flow regime

The effects of various surface roughness geometrical properties including roughness height(5%,10%,15%),number(3,6),and shape(rectangular and triangular)on the flow and heat transfer of slip-flow in trapezoidal microchannels were investigated.The effects of mentioned parameters on the heat transfer coefficient through the microchannel,average Nusselt number and pressure drop for Reynolds number of 5,10,15 and 20 were examined.The obtained results showed that increasing the roughness height and number increases the pressure drop due to higher stagnation effects before and after roughness elements and decreases the Nusselt number due to higher recirculation zones effects than obstruction effects.The most reduction in Nusselt number and the most increment in pressure drop occur at the roughness height of 15%,roughness number of 6 and Reynolds number of 20 by about 10.6%and 52.8%than the smooth microchannel respectively.

Numerical Modeling of Non-Similar Mixed Convection Heat Transfer over a Stretching Surface with Slip Conditions

In this paper, the heat transfer effect on the steady boundary layer flow of a Casson fluid past a stretching surface in the presence of slip conditions was analyzed. The stretching surface is maintained at a constant temperature. The boundary layer conservation equations, which are parabolic in nature, are normalized into non-similar form and then solved numerically with the well-tested, efficient, implicit, stable Keller-box finite difference scheme. The resulting equations are solved numerically by using the Kellerbox finite-difference method, and the expressions for velocity and temperature are obtained. They satisfy all imposed initial and boundary conditions and reduce to some well-known solutions for non-Newtonian fluids. Numerical results for velocity, temperature, skin friction and Nusselt number are shown in various graphs and discussed for embedded flow parameters. It is found that both velocity and temperature decrease with an increase of the Casson fluid parameter.

Viscous Slip MHD Flow over a Moving Sheet with an Arbitrary Surface Velocity

The magnetohydrodynamic（MHD） flow induced by a stretching or shrinking sheet under slip conditions is studied.Analytical solutions based on the boundary layer assumption are obtained in a closed form and can be applied to a flow configuration with any arbitrary velocity distributions. Seven typical sheet velocity profiles are employed as illustrating examples. The solutions to the slip MHD flow are derived from the general solution and discussed in detail. Different from self-similar boundary layer flows, the flows studied in this work have solutions in explicit analytical forms. However, the current flows require special mass transfer at the wall, which is determined by the moving velocity of the sheet. The effects of the slip parameter, the mass transfer at the wall, and the magnetic field on the flow are also demonstrated.

Research progress of slippage characteristic and gas film stability enhancement methods on biomimetic hydrophobic surfaces

The biomimetic hydrophobic surface is a potentially efficient underwater drag reduction method and the drag reduction mechanism of this kind of surface comes from the interfacial slippage.For now,it is a hotspot to grasp the slippage characteristic and explore slippage enhancement strategies.This paper not only summarizes our numerical simulation and experimental results of slippage characteristic at the solid-liquid interface(SLI)of hydrophobic surfaces(HS)and the gas-liquid interface(GLI)of superhydrophobic surfaces(SHS)in recent years,but also introduces some innovative methods that can effectively improve the gas film stability and drag reduction effect of SHS.First,we used the molecular dynamics(MD)simulation method to figure out the effect of the solid-liquid interaction strength,the system temperature and the shear rate on the slippage of SLI,and expound their action mechanism from molecular scale.Then,by MD and multibody dissipative particle dynamics(MDPD)method,the slippage behavior at the GLI was studied under the influence of the microstructure size and the flow driving velocity.We proposed a new kind of hybrid slip boundary condition model to describe the slippage characteristic on GLI.In addition,we found through experiment that a three-dimensional backflow will appear on the GLI under the interfacial adsorption of surfactants,and the backflow direction will reverse with the change of GLI morphology.Finally,we put forward the wettability step structure and gas injection method to enhance the stability and drag reduction effect of the gas film on SHS.

Boundary slip and lubrication mechanisms of organic friction modifiers with effect of surface moisture

Surface moisture or humidity impacting the lubrication property is a ubiquitous phenomenon in tribological systems,which is demonstrated by a combination of molecular dynamics(MD)simulation and experiment for the organic friction modifier(OFM)-containing lubricant.The stearic acid and poly-α-olefin 4cSt(PAO4)were chosen as the OFM and base oil molecules,respectively.The physical adsorption indicates that on the moist surface water molecules are preferentially adsorbed on friction surface,and even make OFM adsorption film thoroughly leave surface and mix with base oil.In shear process,the adsorption of water film and desorption OFM film are further enhanced,particularly under higher shear rate.The simulated friction coefficient(that is proportional to shear rate)increases firstly and then decreases with thickening water film,in good agreement with experiments,while the slip length shows a contrary change.The wear increases with humidity due to tribochemistry revealing the continuous formation and removal of Si–O–Si network.The tribological discrepancy of OFM-containing lubricant in dry and humid conditions is attributed to the slip plane’s transformation from the interface between OFM adsorption film and lubricant bulk to the interface between adsorbed water films.This work provides a new thought to understand the boundary lubrication and failure of lubricant in humid environments,likely water is not always harmful in oil lubrication systems.