Array processing-a new method to detect and correct errors on array resistivity logging tool measurements

In recent years more and more multi-array logging tools, such as the array induction and the array lateralog, are applied in place of conventional logging tools resulting in increased resolution, better radial and vertical sounding capability and other features. Multi-array logging tools acquire several times more individual measurements than conventional logging tools. In addition to new information contained in these data, there is a certain redundancy among the measurements. The sum of the measurements actually composes a large matrix. Providing the measurements are error-free, the elements of this matrix show certain consistencies. Taking advantage of these consistencies, an innovative method is developed to detect and correct errors in the array resistivity logging tool raw measurements, and evaluate the quality of the data. The method can be described in several steps. First, data consistency patterns are identified based on the physics of the measurements. Second, the measurements are compared against the consistency patterns for error and bad data detection. Third, the erroneous data are eliminated and the measurements are re-constructed according to the consistency patterns. Finally, the data quality is evaluated by comparing the raw measurements with the re-constructed measurements. The method can be applied to all array type logging tools, such as array induction tool and array resistivity tool. This paper describes the method and illustrates its application with the High Definition Lateral Log （HDLL, Baker Atlas） instrument. To demonstrate the efficiency of the method, several field examples are shown and discussed.

Design of a cross-dipole array acoustic logging tool

When entering an anisotropic formation, a shear wave splits into a fast wave and a slow wave. Based on the principle of four-component cross-dipole acoustic wave measurement, the anisotropy of HTI （Horizontal Transverse Isotropy） formation can be determined. The method of calculating the fast and slow wave data when a shear wave propagates along the borehole axis in anisotropic formation was analyzed, and the implementation of a cross-dipole acoustic logging tool was demonstrated. The tool was composed of transmitter electronics, transmitter mandrel, acoustic isolator, receiver mandrel and main control electronics. Sonde, transmitter circuit, signal receiving and processing circuit, data acquisition system, system control circuit and telemetry interface circuit were presented and analyzed. The test model was used in production wells and standard wells in various areas and the four-component cross-dipole waves were acquired and processed. The waves had good signal-to-noise ratio and clear characteristics, and the fast and slow waveforms, processed slowness curves, anisotropy and fast shear wave azimuth well matched with each other.

An ARM-based debugging system for multipole array acoustic logging tools

This paper presents a debugging system for multi-pole array acoustic logging （MPAL） tools. The debugging system proposed in this study can debug the MPAL tool system, sub-system and local electronics. In the test equipment, we have used principal and subordinate structures, and interconnected the host computer and the front-end machine via Ethernet. The front-end machine is based on the ARM7 （advanced reduced instruction set computing （RISC） machine） technique, the processor of which runs an embedded operating system, namely, uClinux OS. We have analyzed the system telecommunication, human-machine interface circuit, transmitter mandrel interface circuit, receiver mandrel interface circuit, and board-level test interface circuit. The software used in the system consists of the embedded front-computer software and the host application software. We have explained in detail the flow chart of the boot loader in the embedded front-computer software. The host application software is composed of four application subroutines, which match with the functional modules of the system hardware. A net communication program based on the server^client mode is implemented by means of socket programming and multi-thread programming. Test results indicate that the data transmission rate of the system is higher than 1 MB/s, which completely meets the current requirements of the data transmission rate between the tool system and the wireline telemetry device. Application of the debugging system, which includes multiple level test methods, shows that the proposed system can fully meet the test requirements of MPAL at various levels.

Design of Tubular Azimuth Gamma Ray Logging Tool

On the Gamma ray reception study, this paper presents the heavy metal shielding method, which is using C type heavy metal to shield Sodium iodide scintillation crystal. By rotating the drilling tools to scan and detect the gamma ray which are around the borehole wall formation, On study of angle measurement study, base on accelerometers and fluxgate sensors to design the algorithm which can confirm the detecting instrument measurement window position;Moreover, the paper also presents the Rock formation identification method, which is using changing tendency and sequencing of high side and low side gamma to decide the position of the drilling tool. Field experiments showed that the tool can effectively identify the reservoir and rock formation.

Simulation logging experiment and interpretation model of array production logging measurements in a horizontal well

The distributions of local velocity and local phase holdup along the radial direction of pipes are complicated because of gravity differentiation,and the distribution of fluid velocity fi eld changes along the gravity direction in horizontal wells.Therefore,measuring the mixture flow and water holdup is difficult,resulting in poor interpretation accuracy of the production logging output profile.In this paper,oil–water two-phase flow dynamic simulation logging experiments in horizontal oil–water two-phase fl ow simulation wells were conducted using the Multiple Array Production Suite,which comprises a capacitance array tool(CAT)and a spinner array tool(SAT),and then the response characteristics of SAT and CAT in diff erent fl ow rates and water cut production conditions were studied.According to the response characteristics of CAT in diff erent water holdup ranges,interpolation imaging along the wellbore section determines the water holdup distribution,and then,the oil–water two-phase velocity fi eld in the fl ow section was reconstructed on the basis of the fl ow section water holdup distribution and the logging value of SAT and combined with the rheological equation of viscous fl uid,and the calculation method of the oil–water partial phase fl ow rate in the fl ow section was proposed.This new approach was applied in the experiment data calculations,and the results are basically consistent with the experimental data.The total fl ow rate and water holdup from the calculation are in agreement with the set values in the experiment,suggesting that the method has high accuracy.