A novel method of linear demodulation based on edge filter is presented. An experimental system is built up in which LPG is used as the edge filter. We achieve linear demodulation with a bandwidth of 5nm.
This paper focuses on the investigation of modal characteristics and sensing properties of long period grating photonic crystal fibers (LPG-PCFs). An improved effective index method is employed with an objective to st...This paper focuses on the investigation of modal characteristics and sensing properties of long period grating photonic crystal fibers (LPG-PCFs). An improved effective index method is employed with an objective to study its limitations for various designs of LPG-PCFs. Results so obtained with the above method are compared with the corresponding values of multiple multipole (MMP) method results which points the range of validity and applicability of the improved effective index method to LPG-PCFs. It is shown that this method is excellent when the surrounding media is assumed to be air. However, it becomes less accurate when the fiber is immersed into a liquid with a refractive index close to that of the cladding.展开更多
A twist sensor with hybrid few-mode tilted fiber Bragg grating(FM-TFBG) and few-mode long period grating(FM-LPG) in fiber laser cavity is demonstrated. The FM-LPG is utilized to excite LP11 core mode. The FM-TFBG is u...A twist sensor with hybrid few-mode tilted fiber Bragg grating(FM-TFBG) and few-mode long period grating(FM-LPG) in fiber laser cavity is demonstrated. The FM-LPG is utilized to excite LP11 core mode. The FM-TFBG is used for sensing. The transverse modes at 1 553.9 nm and 1 550.5 nm are LP01 and LP21 core modes, respectively, which are coupled from forward-propagating LP11 core mode. These two excitation wavelengths have opposite variation tendencies, which participate in sensing. The twist sensitivity of 0.16 dB/° from-40° to 40° is achieved. The proposed sensor has potentially used for structure monitoring in many areas.展开更多
A high sensitive long period fiber grating（LPFG） sensor for the detection of nitrite is proposed, which is realized by coating multiple poly（sodium 4-styrensulfonate）（PSS） and poly（diallyldimethylammonium） chl...A high sensitive long period fiber grating（LPFG） sensor for the detection of nitrite is proposed, which is realized by coating multiple poly（sodium 4-styrensulfonate）（PSS） and poly（diallyldimethylammonium） chloride （PDDA） layers on the fiber grating surface. The sensitivity of this LPFG sensor is maximum when the number of assembled layers is 70. Under this condition, a nitrite concentration of 3×10^-3 mol/L, which is lower than the National Food Additive Standard, 4.2×10^-3 mol/L, can be distinguished. The sensitivity is further increased by 30% when nitrite was determined in the sucrose solution with a concentration of 65%, which provides a new solution for the best refraction index approaching matched index of the fiber cladding. Compared with chemical methods, this nitrite detection technology offers some advantages, such as high accuracy, non toxicity, high speed, low cost, without chemical reagent, and is suitable for foodstuff security detection.展开更多
A corrugated surface long period grating(LPG)was fabricated on a flat-shaped plastic optical fiber(POF)as a refractive index(RI)sensor by a simple pressing with the heat pressure and mechanical die press print method....A corrugated surface long period grating(LPG)was fabricated on a flat-shaped plastic optical fiber(POF)as a refractive index(RI)sensor by a simple pressing with the heat pressure and mechanical die press print method.The light propagation characteristics of an LPG imprinted on a multi-mode POF were analyzed by the method of geometrical optics.Theoretical and experimental results showed that the structural parameters of the sensor affected the RI sensing performance,and the sensor with a thinner flat thickness,a deeper groove depth of the corrugated surface LPG,and a longer LPG exhibited better RI sensing performance.When the POF with a diameter of 1 mm was pressed with the heat pressure to a flat shape with a thickness of 600μm,an LPG with a period of 300μm,a groove depth of 200μm,and a length of 6 cm was fabricated on it,and the RI sensitivity of 1447%/RIU was obtained with a resolution of 5.494×10^(−6) RIU.In addition,the influences of the POF cladding,tilting of LPG,and bending of the sensing structure were investigated.The results demonstrated that after removing the cladding and tilting or bending the LPG,the RI sensing performance was improved.When the LPG imprinted on the flat-shaped POF was bent with a curvature radius of 6/πcm,the highest sensitivity of 6563%/RIU was achieved with a resolution of 2.487×10^(−9) RIU in the RI range of 1.3330–1.4230.The proposed sensor is a low-cost solution for RI measurement with the features of easy fabrication,high sensitivity,and intensity modulation at the visible wavelengths.展开更多
The proposed technique demonstrates a fiber ring resonator interrogated by an optical time domain reflectometer(OTDR),for intensity sensing.By using this methodology,a cavity round trip time of 2.85ms was obtained.For...The proposed technique demonstrates a fiber ring resonator interrogated by an optical time domain reflectometer(OTDR),for intensity sensing.By using this methodology,a cavity round trip time of 2.85ms was obtained.For a proof of concept,a long-period grating was inserted in the resonant cavity operating as a curvature sensing device.A novel signal processing approach was outlined,regarding to the logarithmic behavior of the OTDR.Through analyzing the experimental results,an increase in the measured sensitivities was obtained by increasing applied bending.With curvatures performed from 1.8 m^(-1) to 4.5 m^(-1),the sensitivity values ranged from 2.94 dB·km^(-1) to 5.15 dB·km^(-1).In its turn,the sensitivities obtained presented a linear behavior when studied as a function of the applied curvature,following a slope of 0.86×10-3 dB.The advantages of applying this technique were also discussed,demonstrating two similar fiber rings multiplexed in a series of configurations.展开更多
We propose and demonstrate a sensitive vector twist sensor based on a small period long period fiber grating(SP-LPFG)fabricated with a femtosecond(fs)laser.The fabricated SP-LPFG is compact in size(2.8 mm)and shows st...We propose and demonstrate a sensitive vector twist sensor based on a small period long period fiber grating(SP-LPFG)fabricated with a femtosecond(fs)laser.The fabricated SP-LPFG is compact in size(2.8 mm)and shows strong polarization dependent peaks in its transmission spectrum due to the vectorial behavior of high-order cladding modes.Twist sensing is realized by monitoring the polarization dependent peaks,since the polarization of input light changes with fiber twist.The proposed sensor can be interrogated by the peak intensity and wavelength,with high twist sensitivity that reaches 0.257 dB/deg and 0.115 nm/deg,respectively.展开更多
We propose a high temperature-sensitive long period fiber grating（LPFG） sensor fabricated by using the femtosecond laser transversal-scanning method. The femtosecond pulses scan over the whole fiber core and some pa...We propose a high temperature-sensitive long period fiber grating（LPFG） sensor fabricated by using the femtosecond laser transversal-scanning method. The femtosecond pulses scan over the whole fiber core and some part of the cladding region; the modified regions are more extended. It is found that the LPFG-I fabricated by the transversal-scanning method shows higher temperature sensitivity and better temperature uniformity than that of LPFG-II written by the femtosecond laser point-by-point method. The LPFG-I with a temperature sensitivity of 75.96 pm/°C in the range of 25°C–400°C is measured. Moreover, in the range from 400°C to 800°C, a higher temperature sensitivity of 148.64 pm/°C and good linearity of 0.99 are achieved, while the temperature sensitivity of LPFG-II is only 95.55 pm/°C. LPFG-I exhibits better temperature characteristics, which, to the best of our knowledge, has the highest sensitivity in silica fiber temperature sensors.展开更多
In this paper,a novel liquid level sensor with ultra-high sensitivity is proposed.The proposed sensor is configured by a sliceshaped composite long period fiber grating(SSC-LPFG).The SSC-LPFG is prepared by polishing ...In this paper,a novel liquid level sensor with ultra-high sensitivity is proposed.The proposed sensor is configured by a sliceshaped composite long period fiber grating(SSC-LPFG).The SSC-LPFG is prepared by polishing two opposite sides of a composite multimode-single-mode-multimode fiber structure using a CO;laser.The method improves the sensitivity of the sensor to external environment.Based on the simulation calculation,a liquid level sensor with a length of 3 mm is designed.The experimental transmission spectrum agrees well with the simulation result.The experimental results show that the sensitivity reaches 7080 pm/mm in the liquid level range of 0-1400 μm in water.The temperature sensitivity is24.52 pm/℃ in the range of 20℃-90℃.Due to the ultra-high sensitivity,good linearity,and compact structure,the SSC-LPFG has potential application in the field of high-Drecision liquid level measurement.展开更多
Two promising post-treatment techniques, i.e. applying tensile strain and rising temperature, are demonstrated to enhance the mode-coupling efficiency of the CO2-1aser-induced long period fiber gratings （LPFGs） with...Two promising post-treatment techniques, i.e. applying tensile strain and rising temperature, are demonstrated to enhance the mode-coupling efficiency of the CO2-1aser-induced long period fiber gratings （LPFGs） with periodic grooves. Such two post-treatment techniques can be used to enhance the resonant attenuation of the grating to achieve a LPFG-based filter with an extremely large attenuation and to tailor the transmission spectrum of the CO2-1aser-induced LPFG after grating fabrication.展开更多
A long period fiber grating （LPFG） fabricated upon the all-solid photonic bandgap fiber by CO2 laser irradiation was investigated, and its resonance wavelength was at 1335.76nm with a modulation depth of 15dB and a ...A long period fiber grating （LPFG） fabricated upon the all-solid photonic bandgap fiber by CO2 laser irradiation was investigated, and its resonance wavelength was at 1335.76nm with a modulation depth of 15dB and a 3-dB bandwidth of 2.6nm. We studied its strain, temperature, and index sensor characteristics, the strain sensitivity of 0.992 pm/m was obtained by using linear fit, and the relationship between the refractive index and wavelength obeyed the distribution of quadratic function. Also, we demonstrated its temperature response was relatively insensitive （21.51 pm/~C）.展开更多
Based on the full vector complex coupled mode theory, a detailed analysis is made on the transmission spectrum characteristics of tilted long period fiber gratings. New transmission peaks are observed, which are locat...Based on the full vector complex coupled mode theory, a detailed analysis is made on the transmission spectrum characteristics of tilted long period fiber gratings. New transmission peaks are observed, which are located beside the long wavelength side of each transmission peak in the transmission spectrum of normal long period fiber gratings. The emerging transmission peaks are quite sensitive to both the grating tilted angle and the surrounding refractive index, and the corresponding relationship is discussed. Furthermore, a novel sensing characteristic is investigated about the tilted long period fiber gratings, which is related to the transmission resonant wavelength and peak amplitude.展开更多
<div style="text-align:justify;"> In this paper, a hybrid optical fiber structure for solution concentration measurement with the temperature compensation is proposed. The structure consists of long pe...<div style="text-align:justify;"> In this paper, a hybrid optical fiber structure for solution concentration measurement with the temperature compensation is proposed. The structure consists of long period fiber grating (LPFG) and single mode-multimode-single mode (SMS) fiber structures. The sensing mechanism of the device is studied and verified by experiments. LPFG is sensitive to solution concentration and is affected by temperature crosstalk. SMS structure is not affected by solution concentration, but sensitive to ambient temperature. It can be used as a temperature compensation system. The sensitivity coefficients of LPFG and SMS on temperature and concentration were measured experimentally, and a dual-wavelength matrix was established to realize simultaneous measurement of solution temperature and concentration. </div>展开更多
基金Supported by the National '863' high technology project (2002 AA313110)
文摘A novel method of linear demodulation based on edge filter is presented. An experimental system is built up in which LPG is used as the edge filter. We achieve linear demodulation with a bandwidth of 5nm.
文摘This paper focuses on the investigation of modal characteristics and sensing properties of long period grating photonic crystal fibers (LPG-PCFs). An improved effective index method is employed with an objective to study its limitations for various designs of LPG-PCFs. Results so obtained with the above method are compared with the corresponding values of multiple multipole (MMP) method results which points the range of validity and applicability of the improved effective index method to LPG-PCFs. It is shown that this method is excellent when the surrounding media is assumed to be air. However, it becomes less accurate when the fiber is immersed into a liquid with a refractive index close to that of the cladding.
基金supported by the National Natural Science Foundation of China(Nos.11674177,61775107,61835006 and 11704283)the Natural Science Foundation of Tianjin in China(No.16JCZDJC31000)the Scientific Research Planning and Development Project of Handan in China(No.1621203035)
文摘A twist sensor with hybrid few-mode tilted fiber Bragg grating(FM-TFBG) and few-mode long period grating(FM-LPG) in fiber laser cavity is demonstrated. The FM-LPG is utilized to excite LP11 core mode. The FM-TFBG is used for sensing. The transverse modes at 1 553.9 nm and 1 550.5 nm are LP01 and LP21 core modes, respectively, which are coupled from forward-propagating LP11 core mode. These two excitation wavelengths have opposite variation tendencies, which participate in sensing. The twist sensitivity of 0.16 dB/° from-40° to 40° is achieved. The proposed sensor has potentially used for structure monitoring in many areas.
基金Supported by the National Natural Science Foundation of China(Nos.60707016 and 60807030)
文摘A high sensitive long period fiber grating（LPFG） sensor for the detection of nitrite is proposed, which is realized by coating multiple poly（sodium 4-styrensulfonate）（PSS） and poly（diallyldimethylammonium） chloride （PDDA） layers on the fiber grating surface. The sensitivity of this LPFG sensor is maximum when the number of assembled layers is 70. Under this condition, a nitrite concentration of 3×10^-3 mol/L, which is lower than the National Food Additive Standard, 4.2×10^-3 mol/L, can be distinguished. The sensitivity is further increased by 30% when nitrite was determined in the sucrose solution with a concentration of 65%, which provides a new solution for the best refraction index approaching matched index of the fiber cladding. Compared with chemical methods, this nitrite detection technology offers some advantages, such as high accuracy, non toxicity, high speed, low cost, without chemical reagent, and is suitable for foodstuff security detection.
文摘A corrugated surface long period grating(LPG)was fabricated on a flat-shaped plastic optical fiber(POF)as a refractive index(RI)sensor by a simple pressing with the heat pressure and mechanical die press print method.The light propagation characteristics of an LPG imprinted on a multi-mode POF were analyzed by the method of geometrical optics.Theoretical and experimental results showed that the structural parameters of the sensor affected the RI sensing performance,and the sensor with a thinner flat thickness,a deeper groove depth of the corrugated surface LPG,and a longer LPG exhibited better RI sensing performance.When the POF with a diameter of 1 mm was pressed with the heat pressure to a flat shape with a thickness of 600μm,an LPG with a period of 300μm,a groove depth of 200μm,and a length of 6 cm was fabricated on it,and the RI sensitivity of 1447%/RIU was obtained with a resolution of 5.494×10^(−6) RIU.In addition,the influences of the POF cladding,tilting of LPG,and bending of the sensing structure were investigated.The results demonstrated that after removing the cladding and tilting or bending the LPG,the RI sensing performance was improved.When the LPG imprinted on the flat-shaped POF was bent with a curvature radius of 6/πcm,the highest sensitivity of 6563%/RIU was achieved with a resolution of 2.487×10^(−9) RIU in the RI range of 1.3330–1.4230.The proposed sensor is a low-cost solution for RI measurement with the features of easy fabrication,high sensitivity,and intensity modulation at the visible wavelengths.
基金This work is financed by National Funds through the Portuguese funding agency,FCT-“Fundação para a Ciência e a Tecnologia”under Grant No.UID/EEA/50014/2019.
文摘The proposed technique demonstrates a fiber ring resonator interrogated by an optical time domain reflectometer(OTDR),for intensity sensing.By using this methodology,a cavity round trip time of 2.85ms was obtained.For a proof of concept,a long-period grating was inserted in the resonant cavity operating as a curvature sensing device.A novel signal processing approach was outlined,regarding to the logarithmic behavior of the OTDR.Through analyzing the experimental results,an increase in the measured sensitivities was obtained by increasing applied bending.With curvatures performed from 1.8 m^(-1) to 4.5 m^(-1),the sensitivity values ranged from 2.94 dB·km^(-1) to 5.15 dB·km^(-1).In its turn,the sensitivities obtained presented a linear behavior when studied as a function of the applied curvature,following a slope of 0.86×10-3 dB.The advantages of applying this technique were also discussed,demonstrating two similar fiber rings multiplexed in a series of configurations.
基金supported by the National Natural Science Foundation of China (Nos. 11574070, 11874126, and 51803037)the Leading Talents of Guangdong Province Program (No. 2016LJ06D506)the Natural Science FoundationofGuangdongProvince,China(No. 2019A1515011229)
文摘We propose and demonstrate a sensitive vector twist sensor based on a small period long period fiber grating(SP-LPFG)fabricated with a femtosecond(fs)laser.The fabricated SP-LPFG is compact in size(2.8 mm)and shows strong polarization dependent peaks in its transmission spectrum due to the vectorial behavior of high-order cladding modes.Twist sensing is realized by monitoring the polarization dependent peaks,since the polarization of input light changes with fiber twist.The proposed sensor can be interrogated by the peak intensity and wavelength,with high twist sensitivity that reaches 0.257 dB/deg and 0.115 nm/deg,respectively.
基金supported by the National Natural Science Foundation of China(NSFC)(Nos.91323301,51505505,51475482,and 51475481)the Natural Science Foundation of Hunan Province(No.2016JJ3147)+2 种基金the China Postdoctoral Science Foundation(Nos.2015M572264 and 2016T90757)the Self-selected Topic Fund of State Key Laboratory of High Performance and Complex Manufacturing(No.ZZYJKT2015-08)the Fundamental Research Funds for the Central Universities of Central South University
文摘We propose a high temperature-sensitive long period fiber grating（LPFG） sensor fabricated by using the femtosecond laser transversal-scanning method. The femtosecond pulses scan over the whole fiber core and some part of the cladding region; the modified regions are more extended. It is found that the LPFG-I fabricated by the transversal-scanning method shows higher temperature sensitivity and better temperature uniformity than that of LPFG-II written by the femtosecond laser point-by-point method. The LPFG-I with a temperature sensitivity of 75.96 pm/°C in the range of 25°C–400°C is measured. Moreover, in the range from 400°C to 800°C, a higher temperature sensitivity of 148.64 pm/°C and good linearity of 0.99 are achieved, while the temperature sensitivity of LPFG-II is only 95.55 pm/°C. LPFG-I exhibits better temperature characteristics, which, to the best of our knowledge, has the highest sensitivity in silica fiber temperature sensors.
基金supported by the Joint Research Fund in Astronomy under cooperative agreement between the National Natural Science Foundation of China (NSFC) and Chinese Academy of Sciences (CAS) (Nos. U1831115, U2031132, U1931206, and U2031130)Natural Science Foundation of Heilongjiang Province (No. ZD2019H003)Fundamental Research Funds for the Central Universities to the Harbin Engineering University
文摘In this paper,a novel liquid level sensor with ultra-high sensitivity is proposed.The proposed sensor is configured by a sliceshaped composite long period fiber grating(SSC-LPFG).The SSC-LPFG is prepared by polishing two opposite sides of a composite multimode-single-mode-multimode fiber structure using a CO;laser.The method improves the sensitivity of the sensor to external environment.Based on the simulation calculation,a liquid level sensor with a length of 3 mm is designed.The experimental transmission spectrum agrees well with the simulation result.The experimental results show that the sensitivity reaches 7080 pm/mm in the liquid level range of 0-1400 μm in water.The temperature sensitivity is24.52 pm/℃ in the range of 20℃-90℃.Due to the ultra-high sensitivity,good linearity,and compact structure,the SSC-LPFG has potential application in the field of high-Drecision liquid level measurement.
基金the National Natural Science Foundation of China （grant nos. 61425007, 11174064, 61377090, 61575128, and 61308027）, Guangdong Provincial Department of Science and Technology （grant nos. 2014A030308007, 2014A030312008, 2014B050504010, and 2015B010105007）, Science and Technology Innovation Commission of Shenzhen/Nanshan （grant nos. ZDSYS20140430164957664, KC2014ZDZJ0008A, and GJHZ20150313093755757）, and Pearl River Scholar Fellowships.
文摘Two promising post-treatment techniques, i.e. applying tensile strain and rising temperature, are demonstrated to enhance the mode-coupling efficiency of the CO2-1aser-induced long period fiber gratings （LPFGs） with periodic grooves. Such two post-treatment techniques can be used to enhance the resonant attenuation of the grating to achieve a LPFG-based filter with an extremely large attenuation and to tailor the transmission spectrum of the CO2-1aser-induced LPFG after grating fabrication.
文摘A long period fiber grating （LPFG） fabricated upon the all-solid photonic bandgap fiber by CO2 laser irradiation was investigated, and its resonance wavelength was at 1335.76nm with a modulation depth of 15dB and a 3-dB bandwidth of 2.6nm. We studied its strain, temperature, and index sensor characteristics, the strain sensitivity of 0.992 pm/m was obtained by using linear fit, and the relationship between the refractive index and wavelength obeyed the distribution of quadratic function. Also, we demonstrated its temperature response was relatively insensitive （21.51 pm/~C）.
文摘Based on the full vector complex coupled mode theory, a detailed analysis is made on the transmission spectrum characteristics of tilted long period fiber gratings. New transmission peaks are observed, which are located beside the long wavelength side of each transmission peak in the transmission spectrum of normal long period fiber gratings. The emerging transmission peaks are quite sensitive to both the grating tilted angle and the surrounding refractive index, and the corresponding relationship is discussed. Furthermore, a novel sensing characteristic is investigated about the tilted long period fiber gratings, which is related to the transmission resonant wavelength and peak amplitude.
文摘<div style="text-align:justify;"> In this paper, a hybrid optical fiber structure for solution concentration measurement with the temperature compensation is proposed. The structure consists of long period fiber grating (LPFG) and single mode-multimode-single mode (SMS) fiber structures. The sensing mechanism of the device is studied and verified by experiments. LPFG is sensitive to solution concentration and is affected by temperature crosstalk. SMS structure is not affected by solution concentration, but sensitive to ambient temperature. It can be used as a temperature compensation system. The sensitivity coefficients of LPFG and SMS on temperature and concentration were measured experimentally, and a dual-wavelength matrix was established to realize simultaneous measurement of solution temperature and concentration. </div>
