Load Test Analysis and Research on Long-Span Concrete Continuous Rigid Frame Bridge

Based on the as-built load test of a large bridge,this paper introduces the procedure of the prestressed concrete continuous rigid frame bridge load test.Numerical analysis of the bridge was carried out by simulating and establishing a finite element model,and comparative analysis was carried out with the measured values.The results show that the calculated values were basically consistent with the measured values,which showed that the establishment method of the model was reasonable,and the mechanical performance of the bridge met the service requirements of the designed live load.

Seismic analysis of long-span continuous rigid frame bridges in cold regions:a case study of Bridge 1 in north of international tourism resort in Changbai Mountain

It is helpful to improve the seismic design theory of long-span continuous bridges for studying the seismic performance of each cantilever construction state.Taking the Bridge 1 in the north of Changbai-Mountain international tourism resort as an example,the authors studied it in shutdown phase and the cantilever construction process,established the simulation model by using Midas / civil,and analyzed time-history of each construction stage for the bridge.The study shows that long-span bridge cantilever construction in northeastern China can be divided into two-year tasks for construction(suspending in winter).It is needed to think about seismic stability of the cantilever position in shut-down phase of winter.The effect of longitudinal vibration is the most disadvantageous influence to bridge,and its calculation results can provide reference for seismic design of similar bridges in the future.

Research on controlling long-term performance by tensioning post tendon of long-span continuous rigid-frame bridges

The problems like cracking of the girder in the mid-span and the ever-increasing vertical deflection appear during the long term usage of the long-span continuous rigid-frame bridge.Post-tension tendon with reserved duct can increase the pre-stress of the main beam effectively,and decrease the long term span deflection in order to improve the performance of the girder.At the same time,the proper tension position is very crucial to optimise the stress distribution of the bridge and control the deflection increase.Combining with practical engineering,the authors analyze the influence of different positions of post-tension tendon(including top-,weband bottom plate tendons)on the stress and deflection of the main beam,and find out the optimal position of post tendon.

Stability Analysis of Long-Span Continuous Rigid Frame Bridge with Thin-Wall Pier

During cantilever cast in construction of high-pier and large-span continuous rigid frame bridges, structural stability in the longest cantilevered stage is very important. Based on a practical design case of a large-span continuous rigid frame bridge in Wuhan, the longest span stability coefficient is calculated with linear-buckling and nonlinear-buckling methods, respectively. The influences of both geometrical nonlinearity and the dual nonlinearity of material and geometry are considered. Numerical results indicate that the nonlinear solution is necessary to stability analysis because linear buckling loads are much higher than those of nonlinear buckling. Thus, the edge fiber yield criterion is more convenient and faster than ultimate loading criterion when estimating nonlinear stability of structure, and can be used easily in the initial engineering design.

Time-varying Reliability Analysis of Long-span Continuous Rigid Frame bridge under Cantilever Construction Stage based on the Monitored Strain Data

In general,the material properties,loads,resistance of the prestressed concrete continuous rigid frame bridge in different construction stages are time-varying.So,it is essential to monitor the internal force state when the bridge is in construction.Among them,how to assess the safety is one of the challenges.As the continuous monitoring over a long-term period can increase the reliability of the assessment,so,based on a large number of monitored strain data collected from the structural health monitoring system(SHMS)during construction,a calculation method of the punctiform time-varying reliability is proposed in this paper to evaluate the stress state of this type bridge in cantilever construction stage by using the basic reliability theory.At the same time,the optimal stress distribution function in the bridge mid-span base plate is determined when the bridge is closed.This method can provide basis and direction for the internal force control of this type bridge in construction process.So,it can reduce the bridge safety and quality accidents in construction stages.

Fatigue Safety Assessment of Concrete Continuous Rigid Frame Bridge Based on Rain Flow Counting Method and Health Monitoring Data

The fatigue of concrete structures will gradually appear after being subjected to alternating loads for a long time,and the accidents caused by fatigue failure of bridge structures also appear from time to time.Aiming at the problem of degradation of long-span continuous rigid frame bridges due to fatigue and environmental effects,this paper suggests a method to analyze the fatigue degradation mechanism of this type of bridge,which combines long-term in-site monitoring data collected by the health monitoring system(HMS)and fatigue theory.In the paper,the authors mainly carry out the research work in the following aspects:First of all,a long-span continuous rigid frame bridge installed with HMS is used as an example,and a large amount of health monitoring data have been acquired,which can provide efficient information for fatigue in terms of equivalent stress range and cumulative number of stress cycles;next,for calculating the cumulative fatigue damage of the bridge structure,fatigue stress spectrum got by rain flow counting method,S-N curves and damage criteria are used for fatigue damage analysis.Moreover,it was considered a linear accumulation damage through the Palmgren-Miner rule for the counting of stress cycles.The health monitoring data are adopted to obtain fatigue stress data and the rain flow counting method is used to count the amplitude varying fatigue stress.The proposed fatigue reliability approach in the paper can estimate the fatigue damage degree and its evolution law of bridge structures well,and also can help bridge engineers do the assessment of future service duration.

Analytical Research on Deformation Monitoring of Large Span Continuous Rigid Frame Bridge during Operation

Based on a large span continuous rigid frame bridge in Chongqing of China, the main pier vertical displacement and deviation, the bridge deck alignment and the expansion joint deformation are analytically researched during operation. Firstly, the monitoring content and method of the large span continuous rigid frame bridge are clearly stated. Secondly, by finite element software Midas Civil, the relevant deformation values of the bridge are calculated. Thirdly, in practice, the relevant deformation values of the bridge are measured. Finally, the measured values in practice are compared with the calculated ones by the finite element software Midas Civil, finding that the former is less than the latter, and it can be concluded that the bridge is basically in the normal working condition. In this paper, the analytical research on the deformation monitoring can provide the basis for similar bridges, which has good practical significance.

Analysis on influence of seismic travelling wave effect on semi-active control for long-span rigid-continuous bridge

The analysis approach of semi-active control for long-span rigid-continuous bridge under seismic travelling wave input is established. Magnetorheological dampers are set on the positions of the bridge beatings. The semi-active control calculation and analysis are performed for a five-span rigid-continuous bridge under seismic travelling waves with different apparent surface velocities. The results indicate that travelling wave effect remarkably influences the uncontrolled seismic responses, the semi-active control seismic responses and vibration control effects for the long-span rigid-continuous bridge. It is disadvantageous to the responses of the beams and the piers under the travelling wave input with lower apparent surface velocity, and travelling wave effect can decrease the vibration control effects evidently. Therefore, the travelling wave effect should be considered for the selection of the parameter values of semi-active control system in order to get the designing control effect.

Maintenance Management Research of a Large-span Continuous Rigid Frame Bridge Based on Reliability Assessment by Using Strain Monitored Data

When the bridge components needing maintenance are the world problem at present,and the health monitoring system is considered to be a very help­ful tool for solving this problem.In this paper,a large number of strain data acquired from the structural health monitoring system(SHMS)installed on a continuous rigid frame bridge are adopted to do reliability assessment.Firstly,a calculation method of punctiform time-dependent reliability is proposed based on the basic reliability theory,and introduced how to cal­culate reliability of the bridge by using the stress data transformed from the strain data.Secondly,combined with“Three Sigma”principle and the basic pressure safety reserve requirement,the critical load effects distribu­tion function of the bridge is defined,and then the maintenance reliability threshold for controlling the unfavorable load state which appears in the early operation stage of this type bridge is suggested,and then the combi­nation of bridge maintenance management and health monitoring system is realized.Finally,the transformed stress distribution certifies that the load effects of concrete bridges practically have a normal distribution;as for the concrete continuous rigid frame bridge with C50 strength grade concrete,the retrofit reliability threshold should be valued at 6.13.The methodology suggested in this article can help bridge engineers do effective maintenance of bridges,which can effectively extend the service life of the bridge and bring better economic and social benefits.

Longitudinal force in continuously welded rail on long-span tied arch continuous bridge carrying multiple tracks

Considering arch rib, lateral brace, suspender, girder, pier and track position, the model for the interaction between long-span tied arch continuous bridge and multiple tracks was established by using steel-concrete composite section beam element to simulate concrete-filled steel tube(CFST) arch rib, using the beam element with rigid arm to simulate the prestressed concrete girder and using nonlinear bar element to simulate longitudinal constraint between track and bridge. Taking a(77+3×156.8+77) m tied arch continuous bridge with four tracks on the Harbin-Qiqihar Passenger Dedicated Line as an example, the arrangement of continuously welded rail(CWR) was explored. The longitudinal force in CWR on the tied arch continuous bridge, the pier top horizontal force and torque due to the unbalance load case, were analyzed under the action of temperature, vertical live load, train braking and wind load.Studies show that, it can significantly reduce track displacement to set the track expansion devices at main span arch springing on both sides; the track stress due to arch temperature variation can reach 40.8 MPa; the track stress, pier top horizontal force and torque are related to the number of loaded tracks and train running direction, and the bending force applied to unloaded track is close to the loaded track, while the braking force applied to unloaded track is 1/4 to 1/2 of the loaded track; the longitudinal force of track due to the wind load is up to 12.4 MPa, which should be considered.

Numerical analysis of dynamic response of vehicle–bridge coupled system on long-span continuous girder bridge

To systematically study the vehicle-bridge coupled dynamic response and its change rule with different parameters, a vehicle model with seven degrees of freedom was built and the total potential energy of vehicle space vibration system was deduced. Considering the stimulation of road roughness, the dynamic response equation of vehicle-bridge coupled system was established in accordance with the elastic system principle of total potential energy with stationary value and the ＂set-in-right-position＂ rule. On the basis of the self-compiled Fortran program and bridge engineering, the dynamic response of long- span continuous girder bridge under vehicle load was studied. This study also included the calculation of vehicle impact coefficient, evaluation of vibration comfort, and analysis of dynamic response parameters. Results show the impact coefficient changes with lane number and is larger than the value calculated by the ＂general code for design of highway bridges and culverts （China）＂. The Dieckmann index of bridge vibration is also related to lane number, and the vibration comfort evaluation is good in normal conditions. The relevant conclusions from parametric analyses have practical significance to dynamic design and daily operation of long-span continuous girder bridges in expressways. Safety and comfort are expected to improve significantly with further control of the vibration of vehicle-bridge system.

Effect of concrete creep on pre-camber of continuous rigid-frame bridge

The effect of concrete creep on the pre-camber of a long-span pre-stressed concrete continuous rigid-frame bridge constructed by cantilever casting method was investigated.The difference of creep coefficients calculated with two Chinese codes was discussed.Based on the calculations,the pre-camber of a pre-stressed concrete continuous rigid-frame box bridge was computed for construction control purpose.The results show that the short-term creep coefficient and long-term creep coefficient calculated with the CC-1985 are larger than those calculated with the CC-2004,while the medium-term creep coefficient calculated with the CC-1985 is smaller than that calculated with the CC-2004.The difference of creep deformation calculated with these two codes is small,and the influences of concrete creep on the pre-camber for most of the segments are negligible.The deflections and stresses of the box girder measured during the construction stages agree very well with the predictions.

Cable flexural rigidity influence on suspension bridges static properties

In order to figure out the cable flexural rigidity influence on suspension bridges,a contrast model experiment is made:a chain cable model with no flexural rigidity and a wire cable model with some flexural rigidity.And then,four finite element models of a same long-span suspension bridge with different cable element are set up to be analyzed.Both experimental and numerical simulation results show that,with the increase of the span and the decrease of sag-span ratio,the influence of the cable flexural rigidity is significant.The difference of nodes displacement reaches more than 10 cm in construction analysis,which will bring some trouble to the construction.And the difference of the maximum section edge normal stress may reach 15%,which may have an adverse impact onto the bridge.Therefore,considering the cable flexural rigidity is necessary on some analysis of suspension bridges.

公铁两用大跨度斜拉桥-无砟轨道体系变形适应性研究

高速铁路大跨度斜拉桥结构变形受其复杂服役环境影响显著,而无砟轨道对工后变形的调整能力有限,因此大跨度斜拉桥的复杂变形条件将直接影响其上无砟轨道结构的适应性。以沪渝蓉高铁长江北支公铁两用大跨度斜拉桥应用无砟轨道为工程背景,建立无砟轨道-大跨度斜拉桥一体化精细空间有限元模型,分析铁路、公路以及温度等多种荷载联合作用下大跨度斜拉桥-无砟轨道体系平顺性、无缝线路稳定性和无砟轨道层间变形协调性,从而对大跨度公铁两用钢桁梁斜拉桥-无砟轨道体系变形适应性开展深入研究。结果表明:在运营荷载及温度荷载最不利组合作用下,大跨度斜拉桥主梁线形平顺,变形平缓,桥梁整体刚度较好,桥上无砟轨道几何形位可以满足静态验收标准;大跨度斜拉桥上无缝线路的强度和稳定性满足要求,扣件工作性能良好,钢轨伸缩调节器的设置可有效释放梁端钢轨的纵向应力;无砟轨道层间设置橡胶隔离层且不跨主梁桁架节间的布置方式可提高大跨度斜拉桥上无砟轨道的变形协调性能,使得桥上无砟轨道层间始终处于受压状态,达到“隔而不离”的桥上轨道层间理想服役状态;大跨度公铁两用钢桁梁斜拉桥-无砟轨道体系变形适应性良好。本文研究成果可为公铁两用大跨度钢桁梁斜拉桥上无砟轨道的应用提供技术参考。

考虑墩-梁碰撞效应的连续刚构桥系统易损性与概率地震风险性分析

为研究连续刚构桥主梁与过渡墩碰撞效应对其地震系统易损性和概率地震风险性的影响,以一座主桥跨径为(120+220+120)m的连续刚构桥为研究背景,通过模拟实际施工过程以获得真实成桥内力状态,基于等效荷载法建立考虑该内力状态的动力弹塑性分析模型,采用Hertz-damp接触模型考虑包括主梁与过渡墩碰撞在内的伸缩缝处碰撞效应。选取90条具有速度脉冲的脉冲型近断层地震动沿纵桥向输入,通过时程分析解释了墩梁碰撞过程和破坏机理;采用增量动力分析法,建立考虑桥墩和支座权重系数的全桥复合系统易损性曲线,并与一阶界限法串联模型下限和并联模型上限系统易损性曲线进行对比,将场地危险性函数与易损性函数卷积,建立概率地震风险曲线,考察桥梁系统易损性、概率地震风险性及墩梁碰撞效应的影响。结果表明,若忽略过渡墩与主桥梁体的碰撞效应,将会低估过渡墩的位移反应3~5倍,低估其地震风险性概率120%;当地震动强度为0.2g~0.6g时,轻微破坏和中等破坏的损伤概率被低估了35%~80%;地震动强度为0.6g~1.5g时,严重破坏和完全破坏分别被低估13%~68%和15%~59%。

桥梁预拱度对行车舒适性的影响及桥面线形调整

为研究成桥预拱度对连续刚构桥行车舒适性的影响,以多座主跨跨径为110~200 m的连续刚构桥为研究对象,首先,采用滤波白噪声法建立桥面时域模型,并与按余弦曲线设置的成桥线形叠加模拟成桥后的桥面不平度;其次,采用MATLAB/Simlink搭建车辆-桥面系统模型,以加速度均方根值(RMS)作为桥梁边跨、中跨桥面的行车舒适性评价指标,以最大瞬态振动值(MTVV)作为边跨峰值处短时内的行车舒适性评价指标;最后,分析采取经验法按照余弦曲线设置成桥预拱度的桥梁其跨径和设计时速对边、中跨RMS值的影响,以及成桥预拱度取值对边跨3L/8处MTVV值的影响。研究结果表明:在边跨、中跨处RMS值均小于0.315 m/s^(2),说明采取经验法按照余弦曲线设置成桥预拱度并不影响中跨处的行车舒适性;在边跨3L/8处MTVV值在短时内存在大于0.345 m/s^(2)的情况,说明在边跨峰值处短时内会产生一定不舒适感。提出了一种基于桥面铺装层施工优化边跨3L/8处和边墩墩顶桥面线形的方法,改善了边跨的行车舒适性。

耐震时程法在大跨连续刚构桥纵向抗震性能评估中的应用

采用简化方法对大跨连续刚构桥的抗震性能进行高效和准确的评估,在该类桥梁的设计和加固改造时是非常必要的。耐震时程法作为一种评估桥梁抗震性能的简化方法,只需要一次时程分析就可以实现桥梁从完好到倒塌的全过程分析。为研究耐震时程法在评估大跨连续刚构桥纵向抗震性能的适用性与精确性,本文以一座大跨波形钢腹板连续刚构桥为研究对象,基于中国公路桥梁抗震设计规范设计反应谱,生成3条耐震加速度时程曲线作为地震输入,同时选择16条天然地震动进行增量动力分析,对比研究了该连续刚构桥地震响应特征。研究结果表明:耐震时程分析结果处于增量动力分析结果的包络线之内,耐震时程法中位值与增量动力分析结果的均值曲线吻合较好,因此,耐震时程分析方法可以作为大跨连续刚构桥抗震性能评估的一种高效率方法。

基于机器视觉的大跨长联桥上无缝线路小阻力扣件纵向服役状态监测研究

以福厦高铁渔溪特大桥为例,提出一种基于机器视觉的小阻力扣件纵向服役状态监测方案,以获取大跨长联桥上无缝线路钢轨纵向变形与复合垫板窜出的时变特征;同时,结合梁轨温度与梁端位移测试结果,分析梁体温度、钢轨温度、梁端累积位移、梁轨相对位移与垫板窜出量之间的相关性。研究结果表明:根据图像识别结果,钢轨在监测阶段将随温度变化产生不同方向的伸缩,且钢轨位移略大于垫板窜出量。钢轨昼夜温差要显著大于桥面气温以及连续梁梁内气温、顶板温度、腹板温度,且梁体温度变化幅度显著比钢轨的小,其原因在于钢轨的比热容较小,在同等热量输入输出时产生的温度变化幅度较大。梁端纵向位移随温度变化幅度较小,最大日位移为0.15 mm;在监测周期内,梁端累积位移呈波动减小趋势,即梁体发生了缓慢收缩,其原因在于夏季到秋季时气温逐渐降低,且最大平均位移变化速率为0.09 mm/d。梁体温度、钢轨温度、梁端累积位移、梁轨累积相对位移和垫板窜出量之间的相关系数均大于0.8,说明其相关性较大,且均呈较好的正相关关系。通过基于机器视觉的小阻力扣件状态监测方法,可见小阻力扣件在福厦高铁渔溪特大桥区段具有较好的纵向服役状态,且监测周期内线路状态均正常,验证了此类方案在小阻力扣件现场监测中的适用性。

高铁大跨双肢墩连续刚构桥减震系梁地震易损性分析

为了解地震作用下减震系梁对高铁大跨双肢墩连续刚构桥的减震效果,以某主跨180 m的山区高铁双肢墩连续刚构桥为背景,分别建立采用钢筋混凝土(RC)系梁、2种新型减震系梁(可屈服钢系梁与斜交筒式黏弹性阻尼器系梁)方案的全桥有限元模型,对比分析不同系梁方案下的结构损伤、桥面平顺性指标等。结果表明:2种新型减震系梁均不会在地震作用下出现负刚度,新型减震系梁方案较RC系梁方案能有效降低系梁和主墩的结构损伤概率,主墩最大压应变降低83.3%;但减震系梁对震后桥面平顺性指标无明显改善,需采用更具针对性的技术措施。

基于荷载试验的预应力混凝土刚构桥承载能力评估

为了检测高墩大跨宽体箱梁刚构桥的桥梁承载能力及其动力特性,了解桥梁的健康状况,分析是否能满足设计及使用的要求。以凤凰特大桥为工程背景,建立有限元分析模型,通过静载试验和动载试验的结果与计算模型理论值进行对比和分析。在静载试验下,该桥的挠度校验系数为0.710~0.884,应变测点校验系数为0.603~0.800,相对残余应变和相对残余变位均小于20%。动载试验下桥梁左右两幅自振振动频率最小值为4.103 Hz,实测桥跨最大冲击系数为0.039。凤凰特大桥主桥左幅、右幅静载试验结论表明桥跨在正常使用状态下的承载能力能够满足公路-Ⅰ级汽车荷载的使用要求,动载试验结果表明,受检桥跨的实测自振特性及动力响应满足设计要求。