Longitudinal vibration characteristics of a tapered pipe pile considering the vertical support of surrounding soil and construction disturbance

This research is concentrated on the longitudinal vibration of a tapered pipe pile considering the vertical support of the surrounding soil and construction disturbance.First,the pile-soil system is partitioned into finite segments in the vertical direction and the Voigt model is applied to simulate the vertical support of the surrounding soil acting on the pile segment.The surrounding soil is divided into finite ring-shaped zones in the radial direction to consider the construction disturbance.Then,the shear complex stiffness at the pile-soil interface is derived by solving the dynamic equilibrium equation for the soil from the outermost to innermost zone.The displacement impedance at the top of an arbitrary pile segment is obtained by solving the dynamic equilibrium equation for the pile and is combined with the vertical support of the surrounding soil to derive the displacement impedance at the bottom of the upper adjacent segment.Further,the displacement impedance at the pile head is obtained based on the impedance function transfer technique.Finally,the reliability of the proposed solution is verified,followed by a sensitivity analysis concerning the coupling effect of the pile parameters,construction disturbance and the vertical support of the surrounding soil on the displacement impedance of the pile.

Hybrid response surface method for system reliability analysis of pilereinforced slopes

To consider the complex soil-structure interaction in a pile-slope system,it is necessary to analyze the performance of pile-slope systems based on a three-dimensional(3D)numerical model.Reliability analysis of a pile-slope system based on 3D numerical modeling is very challenging because it is computationally expensive and the performance function of the pile failure mode is only defined in the safe domain of soil stability.In this paper,an efficient hybrid response surface method is suggested to study the system reliability of pile-reinforced slopes,where the support vector machine and the Kriging model are used to approximate performance functions of soil failure and pile failure,respectively.The versatility of the suggested method is illustrated in detail with an example.For the example examined in this paper,it is found that the pile failure can significantly contribute to system failure,and the reinforcement ratio can effectively reduce the probability of pile failure.There exists a critical reinforcement ratio beyond which the system failure probability is not sensitive to the reinforcement ratio.The pile spacing affects both the probabilities of soil failure and pile failure of the pile-reinforced slope.There exists an optimal location and an optimal length for the stabilizing piles.

Numerical Simulations of Pile Supported Protective System Subjected to Ship Impact

The head-on collision process between ship and concrete pile supported protective system is simulated by software LS-DYNA. The influences of pile non-linearity and soil non-linearity on impact force, ship crush depth and the cap displacement of pile supported protective system are discussed. It's shown that for both severe impact case and non-severe impact case, the non-linearity of pile material influence the impact force history, ship crush depth. The non-linearity of pile material and soil has remarkable influence on the cap displacement especially for severe impact case. These issues should not be ignored in the analysis of pile supported protective system subjected to ship impact.

Numerical Analysis of Interaction Between Pile-Supported Pier and Bank Slope

Two and three-dimensional finite element analysis programs for pile-soil interaction are compiled. Duncan-Chang's Model is used. The construction sequence of the pier is modeled. The pile-soil interface element is used. The influence of the combination type of piles on the deformation of bank slope and pile behaviour is analyzed. Different designs of a pile-supported pier are compared thoroughly. Calculation results show that the stresses and displacements of the pile are directly related to the distance from the bank slope and the direction of inclination. An inclined prop pile set in the rear platform would remarkably reduce the stresses of piles and the displacement of the pier.

基于Pile单元改进模型的锚杆锚固角度效应数值模拟研究

为探究锚杆在不同锚固角度下的受力特征和作用机制,采用Pile单元改进模型建立具有不同锚固角度的锚固结构面数值模型,并开展一系列的单轴压缩数值试验,对锚杆的锚固角度效应进行了系统研究。结果表明:当锚固角较大时,锚固结构面试件加载过程分为4个阶段,而当锚固角较小时仅为3个阶段;随着锚固角的增加,峰值应力整体上先恒定后减小,弹性模量呈非线性降低;锚杆与试件力的相互作用主要分布在结构面与锚杆相交处以及锚杆两端;锚杆的显著变形和受力主要分布在结构面附近,大致为锚杆直径的3~4倍;随着锚固角的增大,锚杆轴力的贡献呈非线性减小,锚杆剪力的贡献呈线性增大,锚杆抗剪力呈非线性减小。

Numerical analysis of pile lateral behavior of pile supported embankment

A finite difference numerical method was adopted to evaluate the pile lateral behavior of pile supported embankment. A published case history was used to verify the proposed methodology. By simulating the case history, the determination of parameters needed were verified. Then three embankments constructed on different ground conditions with different soil-pile relative stiffnesses were analyzed to study pile lateral behaviors including pile deflection and bending moment. The results show that pile deflections and bending moments induced by soil lateral deformation and embankment vertical load are different for piles at different positions under the same embankment. The relative stiffness between pile and soil affected by the properties of different reinforcing piles such as concrete pile and deep mixing method pile exert important effects on the pile lateral behavior and the pile's failure modes. Consequently, it is necessary to consider the different piles lateral behaviors and possible failure modes at different positions and the different piles proprieties with different reinforcing methods in the embankment stability analysis.

Stabilized effects of L-S cement-mixed batter pile composite foundation for existed warm frozen soil subgrade

In permafrost regions with warm frozen soil,subgrade thaw-collapse phenomenon commonly occurs,facing thaw collapse problems of the existed frozen soil subgrade,thus it is difficult to use traditional methods such as active cooling and passive protection technology to stabilize the existed warm frozen soil subgrade.This study derives a novel stabilizer method,a long-short(L-S)cement-mixed batter pile composite foundation to stabilize the existed warm frozen soil subgrade.To solve the thawcollapse problems in warm frozen soil subgrade,high water content and large compressibility characteristics were compared between soft soil and warm frozen soils.Theoretical analysis of heat conduction and numerical simulation of finite element model were used to study the freeze–thaw process and evaluate the stabilized effects of the L-S cement-mixed batter piles on the warm frozen soil foundation of the Qinghai-Tibet Highway.Furthermore,the thaw process and mechanical properties of foundation and piles were analyzed by introducing the hydration heat factor in the thermodynamic control equation.The results indicate that the thawing displacement of the existed warm frozen soil subgrade was reduced owing to the“support”and“grasp”effects of the L-S cement-mixed batter piles on the surrounding soil.The composite ground formed by strengthening the warm frozen ground with batter piles could considerably improve the bearing capacity of the existed warm frozen ground,effectively restrain the deformation of the upper embankment,and improve the strength of the ground.The analysis can provide method for the construction design of cement mixing batter pile foundation in cold regions.

Construction Technology of Deep Foundation Pit Support in Municipal Civil Engineering Foundation Construction

Municipal civil engineering is the key content of municipal construction,and the construction scale is usually large.The quality of the project plays an important role in the development of urban economy.Due to the rapid increase of high-rise buildings,skyscrapers and underground buildings,the construction technology of deep foundation pit support has gradually become an indispensable construction technology.Therefore,the selection of foundation pit support construction technology is crucial in ensuring that whether the foundation is firm and stable,and whether the subsequent construction activities can be carried out smoothly.In view of this,the article discusses the application of deep foundation pit support construction technology in municipal civil engineering,aiming to provide reference for subsequent projects.

成都地铁基坑围护桩大变形原因分析及对策研究

[目的]周边环境及地质条件复杂的地铁基坑施工稍有不慎易导致基坑事故的发生。需分析基坑围护桩大变形原因,并提出针对性加固措施。[方法]以成都某近接老旧建筑物的桩锚支护结构地铁车站基坑为工程背景,分析了基坑施工过程中围护桩体发生大变形的原因,提出控制围护桩变形的加固措施。通过Harding-soil二阶高级本构模型研究了围护桩发生变形后,坑内采用反压堆载、基坑坑外坡体采用钢管桩及再次开挖前加强两道锚索措施的可行性。[结果及结论]模拟计算结果及现场实测结果表明,围护桩累计位移为77.77 mm;围护桩产生大变形后采用加固措施,可将围护桩水平位移控制在53 mm以内;根据模拟计算结果及现场实测结果,二者桩体水平位移曲线变化规律一致。实际施工结果表明,采取加固措施后,基坑变形控制效果明显,后续施工过程中未发生大范围变形。

综合管廊深基坑支护结构变形分析及优化研究

基于某综合管廊深基坑工程,运用Midas有限元软件,通过改变支护桩桩径、型钢布置形式、型钢尺寸、冠梁尺寸、内支撑间距的参数对支护桩水平位移变化规律进行了分析,并选取最优的支护方案。结果表明:通过增加桩径可有效抑制支护桩变形;型钢布置形式和型钢尺寸的改变对支护桩的影响较小;冠梁主要对支护结构的顶部变形起约束作用;内支撑水平向不等间距布置时增大了工作空间从而方便施工。最终方案为Φ850@600 SMW工法三轴水泥土搅拌桩,内插HN700×300×13×24型钢,型钢插一跳一布置;桩顶设置钢筋砼冠梁,内支撑为钢筋砼撑,支撑在冠梁上。模拟结果与实测结果基本一致,符合工程要求。

深基坑双排微型桩-锚-撑组合支护结构受力与变形特性

为深入研究深厚杂填土地层深基坑微型桩-锚-撑组合支护结构随基坑开挖的受力与变形演化规律,首先,依托青岛市某深基坑工程开展双排微型桩-锚-撑原位试验,分析开挖工况下前、后排桩的桩身弯矩分布规律;然后,结合ABAQUS有限元模拟方法,明确微型桩、预应力锚索与钢支撑之间的协同作用及基坑变形规律;最后,揭示微型桩桩径变化、支护结构作用对桩身受力及基坑变形的影响机制。研究结果表明:增加开挖深度引起桩身正弯矩和负弯矩不断增大,极值点位置不断下移,桩身弯矩整体呈正“S”形分布;开挖至基底,前排桩的桩身反弯点分别位于钢支撑下方0.5 m和开挖面位置,后排桩的桩身反弯点分别位于钢支撑下方0.5 m和开挖面下方1.0 m范围内;基坑开挖竖向影响范围约为1.35H(H为基坑开挖深度),桩径增加近1倍,土体水平位移仅减少约51%,且随桩径继续增加,其对于限制基坑变形效果不显著;相较于桩锚支护结构,桩-锚-撑支护结构作用下,前、后排桩的最大水平位移分别减小34.9%和27.3%,基坑土体的最大水平位移减小46.0%。

车辆载荷作用下桩后黏性土主动土压力分析

针对现有设计规范进行桩后主动土压力计算时未考虑车辆载荷的动力效应对支护结构影响的问题,在平面滑裂面假定的基础上,结合拟动力学分析方法,考虑车辆动载荷作用下桩后土体受惯性力的影响,推导出车辆载荷作用下主动土压力的计算式,将主动土压力分为动土压力分量和静土压力分量。分析土体容重、桩-土外摩擦角对主动土压力的影响,以及水平振动加速度系数、内摩擦角、行车速度、车桩间距对动土压力的影响,对比分析不同黏聚力情况下的主动土压力分布规律。研究结果表明:桩后动土压力呈非线性分布;在车辆载荷作用下,一个振动周期内桩后主动土压力随滑动面倾角的增大和时间的持续先增大后减小;动土压力幅值随车桩间距的增大而减小,振动周期随车速的增大而增大。

考虑多失效模式的桩锚结构鲁棒性设计及经济性优化

目的 研究岩土力学参数的不确定性对桩锚支护体系的整体影响,探究经济性和鲁棒性共同作用的优化设计。方法 选取黄土地区工程案例,考虑支护桩隆起破坏、支护桩倾覆破坏、整体稳定性破坏三类破坏形式,使用蒙特卡洛及点估计法嵌套的方式求出不同设计组合下的失效概率及标准差;同时考虑优化设计的经济性,筛选出桩锚支护结构体系的鲁棒性优化设计方案。结果 随着桩长增加,主控模式由隆起破坏向整体稳定性改变,不同的几何参数对结构鲁棒性影响不同,优化后可以获得同时满足经济性、鲁棒性及可靠度要求的最佳设计方案。结论 在桩锚结构设计中考虑经济性优化及多失效模式的鲁棒性设计是必要的。

格栅式钢板桩与桩筏基础集成的基坑支护技术

针对软土地质基坑工程,提出格栅式钢板桩与桩筏基础集成的基坑支护技术,通过设置纵向双排钢板桩与横向钢板桩或钢板组成格栅式钢板桩,以提高支护结构强度与刚度,并与桩筏基础协同工作,以解决结构下部软土层承载力较差的问题,并提高支护结构稳定性。以某管廊工程为依托,通过计算分析与技术对比,论证集成支护技术的安全性与可行性。

桩锚支护越冬基坑抗冻胀性能分析

为解决桩锚支护基坑的越冬问题,对该类基坑负温状态下的抗冻胀性能进行研究。可为实际工程中越冬基坑的桩锚支护设计提供参考依据。考虑锚杆的预应力、层数、间距及锚固长度等因素,运用FLCA^(3D)软件在负温状态下对桩锚支护基坑进行数值模拟研究,分析桩侧冻胀力及桩体位移的变化规律。结果表明锚杆预应力对基坑桩体水平位移影响非常显著,随基坑深度增加,桩侧冻胀力呈增-减-增趋势;随锚杆层数增加,桩体水平位移逐渐减小,而桩侧冻胀力逐渐增大;锚杆竖向间距对桩体的水平位移及桩侧冻胀力的影响较小,桩体水平位移越小,桩侧冻胀力越大;桩体水平位移及桩侧冻胀力随锚固长度增加而增大。研究结果可为桩锚支护越冬基坑的设计和应用提供指导和参考。

圆形抗滑桩-拱形挡土板支挡性能与参数分析

为规避当前施工方法的不足,发展安全、高效和可靠的施工方法。依托东北地区某高速铁路路堑边坡工程,采用适于机械钻孔的圆形抗滑桩代替现行矩形抗滑桩,预制拱形挡土板,本文提出一种新型拱形板-桩墙支挡体系;并构建有限元模型,分析桩长、桩径、桩间距以及拱形挡土板矢跨比对新型拱形板-桩墙支挡体系支护性能的影响;揭示不同参数下桩顶水平位移与桩身内力的变化规律。研究结果表明:桩长与桩身弯矩和剪力大小呈正相关关系,与桩顶水平位移呈负相关关系。桩长超过14 m时,其对桩顶水平位移、桩身弯矩和剪力的影响效应明显减弱;随着桩间距增大,桩顶水平位移增大但变化幅度逐渐减小。拱形挡土板矢跨比增大时,桩顶水平位移、桩身弯矩和剪力均减小。影响拱形板-桩墙体系支挡性能的因素依次为桩间距、桩长、桩径和矢跨比。研究结果为圆形抗滑桩-拱形挡土板支挡体系在实际工程中的应用提供新思路。

桩承式加筋垫层路堤荷载分担改进计算模型

桩承式加筋垫层路堤中的关键荷载传递机制是多种现象的组合,包括路堤填土中的土拱效应、加筋垫层的张拉膜效应和地基土的支撑作用,然而,目前针对此方面的研究尚不完善。本文首先以考虑土体被动土压力发挥程度及桩间土应力非均匀分布改进的Hewlett土拱模型为改进载体;其次,假定加筋垫层为上、下部受均布荷载作用的简支梁,截面拉应力完全由加筋体承担,压应力完全由垫层材料承担,同时考虑地基土反力与梁最大挠度相关,引入地基反应系数,从而建立改进的桩承式加筋垫层路堤荷载分担计算模型;最后,通过工程实例与模型参数分析,验证本文计算模型的可靠性与准确性。研究结果表明:在路堤填筑过程中,土拱效应逐渐完全发挥,促进路堤荷载向桩体转移;随着地基土固结,桩体承担的路堤荷载也在逐渐增大;路堤填土高度、填土内摩擦角、桩间距对桩体荷载分担影响较大,加筋体抗拉模量对其影响较小。

长春市某深基坑桩锚支护数值模拟分析

桩锚支护在深基坑工程开挖过程中具有较好的支护效果,使用有限差分软件FLAC3D6.0对深基坑进行各个工况的模拟具有重大意义。本文以长春某深基坑工程为研究对象,使用FLAC3D6.0有限差分软件进行三维建模,模拟基坑开挖过程中产生的地表水平位移、竖直沉降、坑底隆起以及围护结构的位移等,并做出总结。结果表明,围护结构在各工况下的水平位移随着距基坑边缘距离变大而逐渐减小;基坑水平位移最大值一般出现在基坑中间;坑底隆起值的变化与围护结构水平位移呈正相关;模拟值与实测值的变化规律基本相同,验证了本次模型的准确性。

多元荷载作用下软基深水高桩码头结构承载特性研究

软基深水高桩码头结构受到恶劣外海环境荷载及复杂工作荷载等多元荷载的共同作用。研究表明,船舶撞击荷载是该结构水平向控制荷载,但波浪长期循环荷载作用会引起桩周土体软化,进而导致码头结构在其它荷载作用下承载特性的劣化。鉴于此,首先基于ABAQUS有限元软件建立了深水高桩码头结构-地基土体相互作用的三维弹塑性有限元模型;然后,借助USDFLD子程序实现了同时考虑土体强度弱化和刚度衰减的模拟,进而开展了未考虑土体软化、仅考虑土体强度弱化、仅考虑土体刚度衰减以及同时考虑土体强度弱化和刚度衰减对码头结构承载特性影响的对比分析。研究结果表明,与未考虑土体软化时撞击荷载作用下码头结构安全系数相比,仅考虑土体强度弱化时其值降低14.72%,仅考虑土体刚度衰减时其值降低15.28%,同时考虑土体强度弱化和刚度衰减时其值降低19.44%,且考虑土体软化后桩周土体的塑性应变范围明显增大,极限状态时桩身应力值减小,结构稳定性显著降低。

SMW工法桩施工过程中变形监测与三维有限元数值模型的建立

SMW工法桩是基坑工程中的一种组合支护形式,兼具挡土与止水的作用,具有造价低、施工便捷、对基坑周边影响较小等优势。依托广东江门某基坑工程,通过现场监测和建立三维有限元模型数值模拟的方法对SMW工法桩施工过程中的变形进行研究。结果表明:围护结构桩顶水平位移的模拟值与实测值两者之差在3 mm以内,桩顶竖向位移模拟值与实测值两者之差在1 mm以内;实测数据与数值模拟结果基本拟合,所建立的三维有限元数值模型与实际工程结构较为相符,在施工过程中将现场监测与数值模拟相结合,以确保工程施工的质量与安全。