Cable-membrane structures have small rigidity and are highly sensitive to wind. Structural health monitoring is necessary to ensure the serviceability and safety of the structure. In this research, the design method o...Cable-membrane structures have small rigidity and are highly sensitive to wind. Structural health monitoring is necessary to ensure the serviceability and safety of the structure. In this research, the design method of a structural health monitoring system is using the characteristics of a cable-membrane structure. Taking the Yueyang Sanhe Airport Terminal as an example, a finite element model is established to determine the critical structural components. Next, the engineering requirements and the framework of the monitoring system are studied based on the results of numerical analysis. The specific implementation of the structural health monitoring is then carried out, which includes sensor selection, installation and wiring. The proposed framework is successfully applied to the monitoring system for the Yueyang Airport terminal building, and the synchronous acquisition of fiber Bragg grating and acceleration sensor signals is implemented in an innovative way. The successful implementation and operation of structural health monitoring will help to guarantee the safety of the cablemembrane structure during its service life.展开更多
Separators play a critical role in the safety and performance of lithium-ion batteries.However,commercial polyolefin separators are limited by their poor affinity with electrolytes and low melting points.In this work,...Separators play a critical role in the safety and performance of lithium-ion batteries.However,commercial polyolefin separators are limited by their poor affinity with electrolytes and low melting points.In this work,we constructed a reinforced-concrete-like structure by homogeneously dispersing nano-Al_(2)O_(3) and cellulose on the separators to improve their stability and performance.In this reinforcedconcrete-like structure,the cellulose is a reinforcing mesh,and the nano-Al_(2)O_(3) acts as concrete to support the separator.After constructing the reinforced-concrete-like structure,the separators exhibit good stability even at 200℃(thermal shrinkage of 0.3%),enhanced tensile strain(tensile stress of 133.4 MPa and tensile strains of 62%),and better electrolyte wettability(a contact angle of 6.5°).Combining these advantages,the cells with nano-Al_(2)O_(3)@cellulose-coated separators exhibit stable cycling performance and good rate performance.Therefore,the construction of the reinforced-concretelike structure is a promising technology to promote the application of lithium-ion batteries in extreme environments.展开更多
With the increment of the complexity of structural systems and the span of spatial structures, the interactions between parts of the structures, especially between some flexible substructures, become too complex to be...With the increment of the complexity of structural systems and the span of spatial structures, the interactions between parts of the structures, especially between some flexible substructures, become too complex to be analyzed clearly. In this paper, taking an actual gymnasium of a long-span spatial steel-cable-membrane hybrid structure as the calculation model, the static and dynamic analyses of the hybrid structures are performed by employing the global analysis of the whole hybrid structure and the substructural analysis of the truss arch substructure, the cable-membrane substructure, etc. In addition, the comparison of stresses and displacements of structural members in the global and substructural analyses is made. The numerical results show that serious errors exist in the substructural analysis of the hybrid structure, and the global analysis is necessary for the hybrid structure under the excitation of static loads and seismic loads.展开更多
Building well-developed ion-conductive highways is highly desirable for anion exchange membranes(AEMs).Grafting side chain is a highly effective approach for constructing a well-defined phaseseparated morphological st...Building well-developed ion-conductive highways is highly desirable for anion exchange membranes(AEMs).Grafting side chain is a highly effective approach for constructing a well-defined phaseseparated morphological structure and forming unblocked ion pathways in AEMs for fast ion transport.Fluorination of side chains can further enhance phase separation due to the superhydrophobic nature of fluorine groups.However,their electronic effect on the alkaline stability of side chains and membranes is rarely reported.Here,fluorine-containing and fluorine-free side chains are introduced into the polyaromatic backbone in proper configuration to investigate the impact of the fluorine terminal group on the stability of the side chains and membrane properties.The poly(binaphthyl-co-p-terphenyl piperidinium)AEM(QBNp TP)has the highest molecular weight and most dimensional stability due to its favorable backbone arrangement among ortho-and meta-terphenyl based AEMs.Importantly,by introducing both a fluorinated piperidinium side chain and a hexane chain into the p-terphenyl-based backbone,the prepared AEM(QBNp TP-QFC)presents an enhanced conductivity(150.6 m S cm^(-1))and a constrained swelling at 80℃.The electronic effect of fluorinated side chains is contemplated by experiments and simulations.The results demonstrate that the presence of strong electro-withdrawing fluorine groups weakens the electronic cloud of adjacent C atoms,increasing OH^(-)attack on the C atom and improving the stability of piperidinium cations.Hence QBNp TP-QFC possesses a robust alkaline stability at 80℃(95.3%conductivity retention after testing in 2 M Na OH for 2160 h).An excellent peak power density of 1.44 W cm^(-2)and a remarkable durability at 80℃(4.5%voltage loss after 100 h)can be observed.展开更多
Alcohol-permselectivity pervaporation has been arousing increasingly more attention in bioalcohol production due to the advantages of environmental friendliness, low energy consumption and easy coupling with fermentat...Alcohol-permselectivity pervaporation has been arousing increasingly more attention in bioalcohol production due to the advantages of environmental friendliness, low energy consumption and easy coupling with fermentation process. With the intrinsic feature of larger molecules preferentially permeating and the consequent inferiority in selective diffusion, the development of alcohol-permselective membrane is relatively retarded compared with water-permselective membrane. This review presents the prevalent membrane materials utilized for alcohol-permselective pervaporation and emphatically expatiates the representative and important developments in the past five years from the aspect of tuning confined structure in membranes. In particular, the diverse structure tuning methods are described with the classifications of physical structure and chemical structure. The corresponding structure-performance relationships in alcohol-permselective pervaporation membranes are also analyzed to identify the objective of structure optimization. Furthermore, the tentative perspective on the possible future directions of alcohol-permselective pervaporation membrane is briefly presented.展开更多
The interaction between membrane structures and their environment can be either static or dynamic. Static interaction refers to interaction with static air, while dynamic interaction refers to wind and its effects. Th...The interaction between membrane structures and their environment can be either static or dynamic. Static interaction refers to interaction with static air, while dynamic interaction refers to wind and its effects. They can be evaluated by two parameters, added mass and radiation/aerodynamic damping, which are experimentally investigated in this study. The study includes the effects of both the static and dynamic interaction on structural dynamic characteristics, and the relationship between the interaction parameters and the covered area of a membrane structure for the static interaction and the relationship between the interaction parameters and wind direction and speed for the dynamic interaction. Experimental data show that the dynamic interaction is strongly correlated with the structural modes, i.e., the interaction of the symmetric modes is much larger than the anti-synmletric modes; and the influence of the dynamic interaction is significant in wind-induced response analysis and cannot be ignored. In addition, it is concluded that the structural natural frequency is remarkably decreased by this interaction, and the frequency band is significantly broadened.展开更多
Microporous membranes of low-high density polyethylene and their blends were prepared bythermally-induced phase separation of polymer/long-aliphatic chain alcohol (diluent) mixtures.The microstructures of this particu...Microporous membranes of low-high density polyethylene and their blends were prepared bythermally-induced phase separation of polymer/long-aliphatic chain alcohol (diluent) mixtures.The microstructures of this particular membrane, which depends on the diluent properties,polymer concentration and cooling rate, were observed by scanning electron microscopy.'Beehive-type,'leafy-like, and lacy porous structure morphologies can be formed,depending onthe blend composition and phase separation conditions, which were discussed by the polymer anddiluent crystallization processes.展开更多
Extraordinary mass transfer phenomenon is usually found when the small molecules pass through a confined structure, whose effective size is commensurate with the mean free path of the molecules. Small changes in the c...Extraordinary mass transfer phenomenon is usually found when the small molecules pass through a confined structure, whose effective size is commensurate with the mean free path of the molecules. Small changes in the confined mass transfer structure(including size, morphology and properties) will lead to significant fluctuations of the mass transfer coefficient. The mass transfer of the penetrant molecules in the dense membranes for pervaporation, gas separation and so on, is located in the scope of confined mass transfer. Incorporating nanofillers into polymer matrix to construct mixed matrix membranes(MMMs) is an effective approach to tune the confined mass transfer structure and enhance the performance of the widely used polymeric membranes. This review focuses on the construction and manipulation of the confined structure in the polymeric membranes via incorporating one-dimensional(1D), two-dimensional(2D) and three-dimensional(3D) fillers.The comparison of the MMMs for pervaporation is summarized, and the research prospective of the MMMs is provided.展开更多
A multi-objective optimization method based on Pareto Genetic Algorithm is presented for shape design of membrane structures from a structural view point.Several non-dimensional variables are defined as optimization v...A multi-objective optimization method based on Pareto Genetic Algorithm is presented for shape design of membrane structures from a structural view point.Several non-dimensional variables are defined as optimization variables,which are decision factors of shapes of membrane structures.Three objectives are proposed including maximization of stiffness,maximum uniformity of stress and minimum reaction under external loads.Pareto Multi-objective Genetic Algorithm is introduced to solve the Pareto solutions.Consequently,the dependence of the optimality upon the optimization variables is derived to provide guidelines on how to determine design parameters.Moreover,several examples illustrate the proposed methods and applications.The study shows that the multi-objective optimization method in this paper is feasible and efficient for membrane structures;the research on Pareto solutions can provide explicit and useful guidelines for shape design of membrane structures.展开更多
The separation stability under high-humidity is significant in practical applications for air filters.Herein,hydrophobic polyvinyl chloride(PVC)nanofiber filters with bead-on-string structure are designed to steadily ...The separation stability under high-humidity is significant in practical applications for air filters.Herein,hydrophobic polyvinyl chloride(PVC)nanofiber filters with bead-on-string structure are designed to steadily remove particle matter under high relative humidity of 90%-95%.The developed hydrophobic filters possess comparable separation performance with the hydrophilic one,but greatly enhanced stability.After the introduction of beadon-string structure,the filtration performance can be furtherly improved due to the formed large cavities and hydrophobicity.Such hydrophobic PVC filters can be promising candidates for air purification in practical applications especially in wet seasons.展开更多
Membrane/solution interface consists of a neutral concentration polar layer(CPL)and a charge layer(CL)under external electrical field,and the neutral CPL can be neglected under high frequency AC electrical field.The r...Membrane/solution interface consists of a neutral concentration polar layer(CPL)and a charge layer(CL)under external electrical field,and the neutral CPL can be neglected under high frequency AC electrical field.The relationship of CL thickness e with electrolyte concentration C and fixed ion exchange sites density σ in membrane surface layer can be expressed as e=σ/C.According to this model,the thickness of the CL on Nafion1135 membrane/solution interface(ec)was calculated under different membrane surface charge quantity Q and variable electrolyte concentration C.The membrane/solution interface CL thickness(em)is obviously related with the membrane properties,and decreases dramatically in a higher electrolyte concentration.em values are 76.3 nm and 110.3 nm respectively for Nafion1135 and PE01 ion exchange membrane in 0.05 mol/L H2SO4 solution,and em values for both membrane tend to 2 nm in 2 mol/L H2SO4 solution.For Nafion1135 membrane,the comparison of ec and em gives the result that CL thickness em obtained by resistance measurement fits well with the calculated CPL thickness ec while proton in CL transferred to membrane surface is 14.56×10?10 mol,which corresponds to the fixed exchange group number in a surface layer with a thickness τ=2 nm for Nafion1135 membrane.展开更多
In this paper,the quasi-static large deformation,wrinkling and fracture behaviors of bimodular structures and membranes are studied with an implicit bond-based peridynamic computational framework.Firstly,the constant ...In this paper,the quasi-static large deformation,wrinkling and fracture behaviors of bimodular structures and membranes are studied with an implicit bond-based peridynamic computational framework.Firstly,the constant and tangential stiffness matrices of the implicit peridynamic formulations for the nonlinear problems are derived,respectively.The former is con structed from the linearization of the bond strain on the basis of the geometric approximation while the latter is established according to the linearization of the pairwise force by using first-order Taylor’s expansion.Then,a bimodular material model in peridynamics is developed,in which the tensile or compressive behavior of the material at each point is conveniently described by the tensile or compressive states of the bonds in its neighborhood.Moreover,the bimodular material model is extended to deal with the wrinkling and fracture problems of membranes by setting the compressive micro-modulus to be zero.In addition,the incremental-iterative algorithm is adopted to obtain the convergent solutions of the nonlinear problems.Finally,several representative numerical examples are presented and the results demonstrate the accuracy and efficiency of the proposed method for the large deformation,wrinkling and fracture analyses of bimodular structures and membranes.展开更多
In this work, the effects of support surface pore structures(including surface pore size, surface pore density and surface porosity) on the performance of thin film composite(TFC) gas separation membrane over a wide p...In this work, the effects of support surface pore structures(including surface pore size, surface pore density and surface porosity) on the performance of thin film composite(TFC) gas separation membrane over a wide pressure range(from 0.3 to 2.0 MPa) were studied. To fulfill it, the polysulfone(PSf) supports with different surface pore structures were prepared. Two kinds of wide-accepted polymeric membrane materials, i.e., polyvinylamine(PVAm) and Pebax 1657 copolymer, were used as skin layer materials. We pointed out for the first time that the support surface average pore size and pore density could affect the chain mobility of polymer of skin layer at the support surface pore entrance, then, can affect the TFC membrane performance. Besides, we also discussed the effects of support on the TFC membrane performance when the feed pressure changes for the first time. This work can provide guidance for choosing a suitable support for TFC gas separation membrane.展开更多
To know the effects of irradiation on the konjac glucomannan (KGM) molecular chain membrane, KGM membrane solution was treated with the irradiation dose of 0-20 kGy in this study, and the structure and properties of...To know the effects of irradiation on the konjac glucomannan (KGM) molecular chain membrane, KGM membrane solution was treated with the irradiation dose of 0-20 kGy in this study, and the structure and properties of KGM membrane were analyzed with Infrared spectrum, Raman spectrum, X-ray, SEM scanning and so on. The results revealed that the effects of different irradiation doses on the KGM molecular chain structure were different. Higher irradiation dose (20 kGy) resulted in partial damage against KGM membrane crystal structure, and there was no obvious change for the amorphous structure; with membrane property test, the tensile strength of KGM membrane gradually increased with the increase of irradiation dose and its elongation at break reduced, but these changes were not significant, WVP value reduced; with SEM, the membrane surface treated with irradiation was smoother even than the membrane without treatment. In addition, when increasing the irradiation dose, membrane surface became more even, and arrangement was more orderly and compact. KGM membrane nrooerties, and it is an ideal Irradiation modification could effectively improve the modification method.展开更多
In routine design of tensioned membrane structures, the membrane is generally modeled using space membrane elements and the cables by space cable elements, with no sliding allowed between the membrane and the cables. ...In routine design of tensioned membrane structures, the membrane is generally modeled using space membrane elements and the cables by space cable elements, with no sliding allowed between the membrane and the cables. On the other hand, large deflections are expected and sliding between the membrane and the cables is inevitable. In the present paper, the general finite element code ABAQUS was employed to investigate the influence of cable sliding on membrane surface on the structural behavior. Three analysis models were devised to fulfill this purpose: (1) The membrane element shares nodes with the cable element; (2) The cable can slide on the membrane surface freely (without friction) and (3) The cable can slide on the membrane surface, but with friction between the cable and the membrane. The sliding problem is modeled using a surface - based contact algorithm. The results from three analysis models are compared, showing that cable sliding has only little influence on the structure shape and on the stress distributions in the membrane. The main influence of cable sliding may be its effect on the dynamic behavior of tensioned membrane structures.展开更多
The axisymmetric deformation of a paraboloidal membrane inflatable structure subjected to a concentrated load at its apex and a uniform internal pressure was analyzed. The wrinkle angle was obtained according to the m...The axisymmetric deformation of a paraboloidal membrane inflatable structure subjected to a concentrated load at its apex and a uniform internal pressure was analyzed. The wrinkle angle was obtained according to the membrane theory when wrinkles appeared and determined the wrinkle region. The wrinkled deformation was obtained based on the relaxed energy function. The effects of inflation pressure and concentrated loads on the wrinkle angle were analyzed and the deformation was obtained at the apex of structure. According to the numerical analysis, the shape of deformed meridians with wrinkles was obtained.展开更多
Lipid-bound [VHb(406)] and lipid-free [VHb(402)] wide type Vitreoscilla hemoglobin were separated from E. coli BL21(DE3). The RZ is 3.30 for [VHb(406)] and 3.15 for [VHb(402)], respectively. VHb(406) shows...Lipid-bound [VHb(406)] and lipid-free [VHb(402)] wide type Vitreoscilla hemoglobin were separated from E. coli BL21(DE3). The RZ is 3.30 for [VHb(406)] and 3.15 for [VHb(402)], respectively. VHb(406) shows a characteristic absorption band at 626 nm, while VHb(402) shows one at 644 nm, and it has more α-helix than VHb(402). Data of Raman spectra experiment shows under the excitation wavelength 488 nm, υ4 vibration of both VHb(402) and VHb(406) had a pure and strong signal at 1375 cm-1, which proves that iron porphyrin of both the samples is at their trivalence oxidation state. And no matter lipid binds VHb or not, the vinyl of porphyrin is at cis state. The catalase activity of Vitreoscilla hemoglobin was explored with L-dopa and H2O2 as substrates. The results indicate that VHb(406) has more catalase activity than VHb(402), VHb is a cell’s oxygen modulator and its catalase ability is modulated by the membrane.展开更多
A series of poly(ethylene oxide)(PEO) membranes with star-like structures for CO_2/H_2 separation were prepared by the photo-polymerization method. The structure of PEO membrane was characterized by Fourier transform ...A series of poly(ethylene oxide)(PEO) membranes with star-like structures for CO_2/H_2 separation were prepared by the photo-polymerization method. The structure of PEO membrane was characterized by Fourier transform infrared spectroscopy(FTIR). The thermal property and inter-segmental distance of polymer chain were investigated by differential scanning calorimetry and wide-angle X-ray diffraction, respectively. The density was determined by hydrostatic weighing method. The gas permeability, solubility and diffusivity of CO_2 and H_2 were investigated in the star-like PEO membranes. The relationship between gas permeation performances and physical properties was also discussed. The membrane exhibits outstanding CO_2 permeability(about 9.7×10^(-11) cm^3(STP) cm/cm^2/s/Pa) and CO_2/H_2 selectivity(about 11) compared with other membranes.展开更多
The wheat roots membrane separates the cell from the environment around it and encloses the cell contents. The pro-tein secondary structure and thermal stability of the plasma membrane of wheat root have been characte...The wheat roots membrane separates the cell from the environment around it and encloses the cell contents. The pro-tein secondary structure and thermal stability of the plasma membrane of wheat root have been characterized in D2O buffer from 20°C to 90°C by Attenuated total reflection Fourier transform infrared spectroscopy (ATR-FTIR). Quantitative analysis of the amide I band (1700 - 1600 cm–1) showed that the plasma membrane proteins contains 41% α-helix, 16% β-sheet, 18% turn, and 25% disorder structures at 20°C. At elevated temperatures from 25°C up to 90°C, the α-helix and the β-sheet structure unfold into turns and the disorder structure, with a major conformational transition occurring at 50°C. There is a rapid decline in H+-ATPase activity of plasma membrane from 35°C to 55°C and it remain very low level H+-ATPase activity of PM from 55°C to 90°C. Therefore the protein conformational transition was one of reasons of loses H+-ATPase activity of plasma membrane.展开更多
Conical membrane structures are a typical form of tensile membrane structures. In the past, most studies focused on the static performance, but few on dynamic performance. In this paper, systematic parameter analysis ...Conical membrane structures are a typical form of tensile membrane structures. In the past, most studies focused on the static performance, but few on dynamic performance. In this paper, systematic parameter analysis of wind-induced response of conical membrane structures has been performed with nonlinear random simulation method in a time domain, by considering some parameters, such as span, rise-span ratio, prestress of membrane, and characteristic of the approaching wind flow. Moreover, formulas of the dynamic coefficient and nonlinear adjustment factor are advised, which can be conveniently used in wind-resistant design of conical membrane structures.展开更多
基金National Natural Science Foundation of China under Grant Nos.51708088 and 51625802the Foundation for High Level Talent Innovation Support Program of Dalian under Grant No.2017RD03
文摘Cable-membrane structures have small rigidity and are highly sensitive to wind. Structural health monitoring is necessary to ensure the serviceability and safety of the structure. In this research, the design method of a structural health monitoring system is using the characteristics of a cable-membrane structure. Taking the Yueyang Sanhe Airport Terminal as an example, a finite element model is established to determine the critical structural components. Next, the engineering requirements and the framework of the monitoring system are studied based on the results of numerical analysis. The specific implementation of the structural health monitoring is then carried out, which includes sensor selection, installation and wiring. The proposed framework is successfully applied to the monitoring system for the Yueyang Airport terminal building, and the synchronous acquisition of fiber Bragg grating and acceleration sensor signals is implemented in an innovative way. The successful implementation and operation of structural health monitoring will help to guarantee the safety of the cablemembrane structure during its service life.
基金funding from the Natural Science Foundation of China(22278150,22075086,22138005,and 22141001)the Guangdong Basic and Applied Basic Research Foundation(2022A1515010980,2023A1515010046)the Fundamental Research Funds for the Central Universities(2022ZYGXZR101).
文摘Separators play a critical role in the safety and performance of lithium-ion batteries.However,commercial polyolefin separators are limited by their poor affinity with electrolytes and low melting points.In this work,we constructed a reinforced-concrete-like structure by homogeneously dispersing nano-Al_(2)O_(3) and cellulose on the separators to improve their stability and performance.In this reinforcedconcrete-like structure,the cellulose is a reinforcing mesh,and the nano-Al_(2)O_(3) acts as concrete to support the separator.After constructing the reinforced-concrete-like structure,the separators exhibit good stability even at 200℃(thermal shrinkage of 0.3%),enhanced tensile strain(tensile stress of 133.4 MPa and tensile strains of 62%),and better electrolyte wettability(a contact angle of 6.5°).Combining these advantages,the cells with nano-Al_(2)O_(3)@cellulose-coated separators exhibit stable cycling performance and good rate performance.Therefore,the construction of the reinforced-concretelike structure is a promising technology to promote the application of lithium-ion batteries in extreme environments.
文摘With the increment of the complexity of structural systems and the span of spatial structures, the interactions between parts of the structures, especially between some flexible substructures, become too complex to be analyzed clearly. In this paper, taking an actual gymnasium of a long-span spatial steel-cable-membrane hybrid structure as the calculation model, the static and dynamic analyses of the hybrid structures are performed by employing the global analysis of the whole hybrid structure and the substructural analysis of the truss arch substructure, the cable-membrane substructure, etc. In addition, the comparison of stresses and displacements of structural members in the global and substructural analyses is made. The numerical results show that serious errors exist in the substructural analysis of the hybrid structure, and the global analysis is necessary for the hybrid structure under the excitation of static loads and seismic loads.
基金the financial support from the National Natural Science Foundation of China(22078272&22278340)。
文摘Building well-developed ion-conductive highways is highly desirable for anion exchange membranes(AEMs).Grafting side chain is a highly effective approach for constructing a well-defined phaseseparated morphological structure and forming unblocked ion pathways in AEMs for fast ion transport.Fluorination of side chains can further enhance phase separation due to the superhydrophobic nature of fluorine groups.However,their electronic effect on the alkaline stability of side chains and membranes is rarely reported.Here,fluorine-containing and fluorine-free side chains are introduced into the polyaromatic backbone in proper configuration to investigate the impact of the fluorine terminal group on the stability of the side chains and membrane properties.The poly(binaphthyl-co-p-terphenyl piperidinium)AEM(QBNp TP)has the highest molecular weight and most dimensional stability due to its favorable backbone arrangement among ortho-and meta-terphenyl based AEMs.Importantly,by introducing both a fluorinated piperidinium side chain and a hexane chain into the p-terphenyl-based backbone,the prepared AEM(QBNp TP-QFC)presents an enhanced conductivity(150.6 m S cm^(-1))and a constrained swelling at 80℃.The electronic effect of fluorinated side chains is contemplated by experiments and simulations.The results demonstrate that the presence of strong electro-withdrawing fluorine groups weakens the electronic cloud of adjacent C atoms,increasing OH^(-)attack on the C atom and improving the stability of piperidinium cations.Hence QBNp TP-QFC possesses a robust alkaline stability at 80℃(95.3%conductivity retention after testing in 2 M Na OH for 2160 h).An excellent peak power density of 1.44 W cm^(-2)and a remarkable durability at 80℃(4.5%voltage loss after 100 h)can be observed.
基金Supported by the National Natural Science Foundation of China(21490585,21606123)the Jiangsu Province Natural Science Foundation for the Youth(BK20160980)+2 种基金the Innovative Research Team Program by the Ministry of Education of China(IRT13070)Top-notch Academic Programs Project of Jiangsu Higher Education Institutions(TAPP)A Project Funded by the Priority Academic Program Development of Jiangsu Higher Education Institutions(PAPD)
文摘Alcohol-permselectivity pervaporation has been arousing increasingly more attention in bioalcohol production due to the advantages of environmental friendliness, low energy consumption and easy coupling with fermentation process. With the intrinsic feature of larger molecules preferentially permeating and the consequent inferiority in selective diffusion, the development of alcohol-permselective membrane is relatively retarded compared with water-permselective membrane. This review presents the prevalent membrane materials utilized for alcohol-permselective pervaporation and emphatically expatiates the representative and important developments in the past five years from the aspect of tuning confined structure in membranes. In particular, the diverse structure tuning methods are described with the classifications of physical structure and chemical structure. The corresponding structure-performance relationships in alcohol-permselective pervaporation membranes are also analyzed to identify the objective of structure optimization. Furthermore, the tentative perspective on the possible future directions of alcohol-permselective pervaporation membrane is briefly presented.
基金National Natural Science Foundation of China Under Grant No. 50725826, 90815021
文摘The interaction between membrane structures and their environment can be either static or dynamic. Static interaction refers to interaction with static air, while dynamic interaction refers to wind and its effects. They can be evaluated by two parameters, added mass and radiation/aerodynamic damping, which are experimentally investigated in this study. The study includes the effects of both the static and dynamic interaction on structural dynamic characteristics, and the relationship between the interaction parameters and the covered area of a membrane structure for the static interaction and the relationship between the interaction parameters and wind direction and speed for the dynamic interaction. Experimental data show that the dynamic interaction is strongly correlated with the structural modes, i.e., the interaction of the symmetric modes is much larger than the anti-synmletric modes; and the influence of the dynamic interaction is significant in wind-induced response analysis and cannot be ignored. In addition, it is concluded that the structural natural frequency is remarkably decreased by this interaction, and the frequency band is significantly broadened.
文摘Microporous membranes of low-high density polyethylene and their blends were prepared bythermally-induced phase separation of polymer/long-aliphatic chain alcohol (diluent) mixtures.The microstructures of this particular membrane, which depends on the diluent properties,polymer concentration and cooling rate, were observed by scanning electron microscopy.'Beehive-type,'leafy-like, and lacy porous structure morphologies can be formed,depending onthe blend composition and phase separation conditions, which were discussed by the polymer anddiluent crystallization processes.
基金Supported by the National Natural Science Foundation of China(21490583 and21621004)the National Science Fund for Distinguished Young Scholars(21125627)+1 种基金Tianjin Application Foundation and Research in Cutting-edge Technology Plan(15JCQNJC43300)the Programme of Introducing Talents of Discipline to Universities(B06006)
文摘Extraordinary mass transfer phenomenon is usually found when the small molecules pass through a confined structure, whose effective size is commensurate with the mean free path of the molecules. Small changes in the confined mass transfer structure(including size, morphology and properties) will lead to significant fluctuations of the mass transfer coefficient. The mass transfer of the penetrant molecules in the dense membranes for pervaporation, gas separation and so on, is located in the scope of confined mass transfer. Incorporating nanofillers into polymer matrix to construct mixed matrix membranes(MMMs) is an effective approach to tune the confined mass transfer structure and enhance the performance of the widely used polymeric membranes. This review focuses on the construction and manipulation of the confined structure in the polymeric membranes via incorporating one-dimensional(1D), two-dimensional(2D) and three-dimensional(3D) fillers.The comparison of the MMMs for pervaporation is summarized, and the research prospective of the MMMs is provided.
基金Sponsored by the National Natural Science Foundation of China(Grant No.50608022)
文摘A multi-objective optimization method based on Pareto Genetic Algorithm is presented for shape design of membrane structures from a structural view point.Several non-dimensional variables are defined as optimization variables,which are decision factors of shapes of membrane structures.Three objectives are proposed including maximization of stiffness,maximum uniformity of stress and minimum reaction under external loads.Pareto Multi-objective Genetic Algorithm is introduced to solve the Pareto solutions.Consequently,the dependence of the optimality upon the optimization variables is derived to provide guidelines on how to determine design parameters.Moreover,several examples illustrate the proposed methods and applications.The study shows that the multi-objective optimization method in this paper is feasible and efficient for membrane structures;the research on Pareto solutions can provide explicit and useful guidelines for shape design of membrane structures.
基金funding from by the National Natural Science Foundation of China(21706076,21536005,51621001)the National Natural Science Foundation of the Guangdong Province(2014A030312007)+1 种基金Guangzhou Technology Project(201804010210)the State Key Laboratory of Pulp and Paper Engineering(201835)。
文摘The separation stability under high-humidity is significant in practical applications for air filters.Herein,hydrophobic polyvinyl chloride(PVC)nanofiber filters with bead-on-string structure are designed to steadily remove particle matter under high relative humidity of 90%-95%.The developed hydrophobic filters possess comparable separation performance with the hydrophilic one,but greatly enhanced stability.After the introduction of beadon-string structure,the filtration performance can be furtherly improved due to the formed large cavities and hydrophobicity.Such hydrophobic PVC filters can be promising candidates for air purification in practical applications especially in wet seasons.
基金Project(02-09-01) supported by Panzhihua Iron and Steel Corporation,China
文摘Membrane/solution interface consists of a neutral concentration polar layer(CPL)and a charge layer(CL)under external electrical field,and the neutral CPL can be neglected under high frequency AC electrical field.The relationship of CL thickness e with electrolyte concentration C and fixed ion exchange sites density σ in membrane surface layer can be expressed as e=σ/C.According to this model,the thickness of the CL on Nafion1135 membrane/solution interface(ec)was calculated under different membrane surface charge quantity Q and variable electrolyte concentration C.The membrane/solution interface CL thickness(em)is obviously related with the membrane properties,and decreases dramatically in a higher electrolyte concentration.em values are 76.3 nm and 110.3 nm respectively for Nafion1135 and PE01 ion exchange membrane in 0.05 mol/L H2SO4 solution,and em values for both membrane tend to 2 nm in 2 mol/L H2SO4 solution.For Nafion1135 membrane,the comparison of ec and em gives the result that CL thickness em obtained by resistance measurement fits well with the calculated CPL thickness ec while proton in CL transferred to membrane surface is 14.56×10?10 mol,which corresponds to the fixed exchange group number in a surface layer with a thickness τ=2 nm for Nafion1135 membrane.
基金The work was supported by the National Natural Science Foundation of China(Grants 11672062,11772082,and 11672063)the 111 Project(Grant B08014)the Fundamental Research Funds for the Central Universities.
文摘In this paper,the quasi-static large deformation,wrinkling and fracture behaviors of bimodular structures and membranes are studied with an implicit bond-based peridynamic computational framework.Firstly,the constant and tangential stiffness matrices of the implicit peridynamic formulations for the nonlinear problems are derived,respectively.The former is con structed from the linearization of the bond strain on the basis of the geometric approximation while the latter is established according to the linearization of the pairwise force by using first-order Taylor’s expansion.Then,a bimodular material model in peridynamics is developed,in which the tensile or compressive behavior of the material at each point is conveniently described by the tensile or compressive states of the bonds in its neighborhood.Moreover,the bimodular material model is extended to deal with the wrinkling and fracture problems of membranes by setting the compressive micro-modulus to be zero.In addition,the incremental-iterative algorithm is adopted to obtain the convergent solutions of the nonlinear problems.Finally,several representative numerical examples are presented and the results demonstrate the accuracy and efficiency of the proposed method for the large deformation,wrinkling and fracture analyses of bimodular structures and membranes.
基金Supported by the National Natural Science Foundation of China(21436009)the National High-tech Research and Development Program(2012AA03A611)the Program of Introducing Talents of Discipline to Universities(B06006)
文摘In this work, the effects of support surface pore structures(including surface pore size, surface pore density and surface porosity) on the performance of thin film composite(TFC) gas separation membrane over a wide pressure range(from 0.3 to 2.0 MPa) were studied. To fulfill it, the polysulfone(PSf) supports with different surface pore structures were prepared. Two kinds of wide-accepted polymeric membrane materials, i.e., polyvinylamine(PVAm) and Pebax 1657 copolymer, were used as skin layer materials. We pointed out for the first time that the support surface average pore size and pore density could affect the chain mobility of polymer of skin layer at the support surface pore entrance, then, can affect the TFC membrane performance. Besides, we also discussed the effects of support on the TFC membrane performance when the feed pressure changes for the first time. This work can provide guidance for choosing a suitable support for TFC gas separation membrane.
基金supported by the National Natural Science Foundation of China(30871749,30901004 and 31071518)the Natural Science Foundation of Fujian Province(2011J01285)+3 种基金the Key Research Project of Guangdong Province(2010B080701079)the doctoral program of higher education of the specialized research fund for the project funded by the United(20113515110010)the Yangcheng Scholars Technology Project of Guangzhou(10B005D)the Fuzhou Science and Technology Plan Project(2011-N-44)
文摘To know the effects of irradiation on the konjac glucomannan (KGM) molecular chain membrane, KGM membrane solution was treated with the irradiation dose of 0-20 kGy in this study, and the structure and properties of KGM membrane were analyzed with Infrared spectrum, Raman spectrum, X-ray, SEM scanning and so on. The results revealed that the effects of different irradiation doses on the KGM molecular chain structure were different. Higher irradiation dose (20 kGy) resulted in partial damage against KGM membrane crystal structure, and there was no obvious change for the amorphous structure; with membrane property test, the tensile strength of KGM membrane gradually increased with the increase of irradiation dose and its elongation at break reduced, but these changes were not significant, WVP value reduced; with SEM, the membrane surface treated with irradiation was smoother even than the membrane without treatment. In addition, when increasing the irradiation dose, membrane surface became more even, and arrangement was more orderly and compact. KGM membrane nrooerties, and it is an ideal Irradiation modification could effectively improve the modification method.
文摘In routine design of tensioned membrane structures, the membrane is generally modeled using space membrane elements and the cables by space cable elements, with no sliding allowed between the membrane and the cables. On the other hand, large deflections are expected and sliding between the membrane and the cables is inevitable. In the present paper, the general finite element code ABAQUS was employed to investigate the influence of cable sliding on membrane surface on the structural behavior. Three analysis models were devised to fulfill this purpose: (1) The membrane element shares nodes with the cable element; (2) The cable can slide on the membrane surface freely (without friction) and (3) The cable can slide on the membrane surface, but with friction between the cable and the membrane. The sliding problem is modeled using a surface - based contact algorithm. The results from three analysis models are compared, showing that cable sliding has only little influence on the structure shape and on the stress distributions in the membrane. The main influence of cable sliding may be its effect on the dynamic behavior of tensioned membrane structures.
基金Sponsored by the Development Program for Outstanding Young Teachers in Harbin Institute of Technology(Grant No.HITQNJS.2008.004)the China Postdoctoral Science Foundation (Grant No.20070420163)Special Fund for Innovation Talents of Science and Technology in Harbin(Grant No.2008RFQXG057)
文摘The axisymmetric deformation of a paraboloidal membrane inflatable structure subjected to a concentrated load at its apex and a uniform internal pressure was analyzed. The wrinkle angle was obtained according to the membrane theory when wrinkles appeared and determined the wrinkle region. The wrinkled deformation was obtained based on the relaxed energy function. The effects of inflation pressure and concentrated loads on the wrinkle angle were analyzed and the deformation was obtained at the apex of structure. According to the numerical analysis, the shape of deformed meridians with wrinkles was obtained.
基金Supported by the National Natural Science Foundation of China(No.30670458)
文摘Lipid-bound [VHb(406)] and lipid-free [VHb(402)] wide type Vitreoscilla hemoglobin were separated from E. coli BL21(DE3). The RZ is 3.30 for [VHb(406)] and 3.15 for [VHb(402)], respectively. VHb(406) shows a characteristic absorption band at 626 nm, while VHb(402) shows one at 644 nm, and it has more α-helix than VHb(402). Data of Raman spectra experiment shows under the excitation wavelength 488 nm, υ4 vibration of both VHb(402) and VHb(406) had a pure and strong signal at 1375 cm-1, which proves that iron porphyrin of both the samples is at their trivalence oxidation state. And no matter lipid binds VHb or not, the vinyl of porphyrin is at cis state. The catalase activity of Vitreoscilla hemoglobin was explored with L-dopa and H2O2 as substrates. The results indicate that VHb(406) has more catalase activity than VHb(402), VHb is a cell’s oxygen modulator and its catalase ability is modulated by the membrane.
基金Funded by the National Natural Science Foundation of China(Nos.21776217,21506160)the Science and Technology Plans of Tianjin(Nos.17PTSYJC00050,18PTSYJC 00190)
文摘A series of poly(ethylene oxide)(PEO) membranes with star-like structures for CO_2/H_2 separation were prepared by the photo-polymerization method. The structure of PEO membrane was characterized by Fourier transform infrared spectroscopy(FTIR). The thermal property and inter-segmental distance of polymer chain were investigated by differential scanning calorimetry and wide-angle X-ray diffraction, respectively. The density was determined by hydrostatic weighing method. The gas permeability, solubility and diffusivity of CO_2 and H_2 were investigated in the star-like PEO membranes. The relationship between gas permeation performances and physical properties was also discussed. The membrane exhibits outstanding CO_2 permeability(about 9.7×10^(-11) cm^3(STP) cm/cm^2/s/Pa) and CO_2/H_2 selectivity(about 11) compared with other membranes.
文摘The wheat roots membrane separates the cell from the environment around it and encloses the cell contents. The pro-tein secondary structure and thermal stability of the plasma membrane of wheat root have been characterized in D2O buffer from 20°C to 90°C by Attenuated total reflection Fourier transform infrared spectroscopy (ATR-FTIR). Quantitative analysis of the amide I band (1700 - 1600 cm–1) showed that the plasma membrane proteins contains 41% α-helix, 16% β-sheet, 18% turn, and 25% disorder structures at 20°C. At elevated temperatures from 25°C up to 90°C, the α-helix and the β-sheet structure unfold into turns and the disorder structure, with a major conformational transition occurring at 50°C. There is a rapid decline in H+-ATPase activity of plasma membrane from 35°C to 55°C and it remain very low level H+-ATPase activity of PM from 55°C to 90°C. Therefore the protein conformational transition was one of reasons of loses H+-ATPase activity of plasma membrane.
基金Sponsored by the National Natural Science Foundation of China(Grant No.50338010).
文摘Conical membrane structures are a typical form of tensile membrane structures. In the past, most studies focused on the static performance, but few on dynamic performance. In this paper, systematic parameter analysis of wind-induced response of conical membrane structures has been performed with nonlinear random simulation method in a time domain, by considering some parameters, such as span, rise-span ratio, prestress of membrane, and characteristic of the approaching wind flow. Moreover, formulas of the dynamic coefficient and nonlinear adjustment factor are advised, which can be conveniently used in wind-resistant design of conical membrane structures.