Drivers of spatial structure in thinned forests

Background:As is widely known,an increasing number of forest areas were managed to preserve and enhance the health of forest ecosystems.However,previous research on forest management has often overlooked the importance of structure-based.Aims:Our objectives were to define the direction of structure-based forest management.Subsequently,we investigated the relationships between forest structure and the regeneration,growth,and mortality of trees under different thinning treatments.Ultimately,the drivers of forest structural change were explored.Methods:On the basis of 92 sites selected from northeastern China,with different recovery time (from 1 to 15years) and different thinning intensities (0–59.9%) since the last thinning.Principal component analysis (PCA)identified relationships among factors determining forest spatial structure.The structural equation model (SEM)was used to analyze the driving factors behind the changes in forest spatial structure after thinning.Results:Light thinning (0–20%trees removed) promoted forest regeneration,and heavy thinning (over 35% of trees removed) facilitated forest growth.However,only moderate thinning (20%–35%trees removed) created a reasonable spatial structure.While dead trees were clustered,and they were hardly affected by thinning intensity.Additionally,thinning intensity,recovery time,and altitude indirectly improve the spatial structure of the forest by influencing diameter at breast height (DBH) and canopy area.Conclusion:Creating larger DBH and canopy area through thinning will promote the formation of complex forest structures,which cultivates healthy and stable forests.

Ultrafast dynamics of femtosecond laser-induced high spatial frequency periodic structures on silicon surfaces

Femtosecond laser-induced periodic surface structures(LIPSS)have been extensively studied over the past few decades.In particular,the period and groove width of high-spatial-frequency LIPSS(HSFL)is much smaller than the diffraction limit,making it a useful method for efficient nanomanufacturing.However,compared with the low-spatial-frequency LIPSS(LSFL),the structure size of the HSFL is smaller,and it is more easily submerged.Therefore,the formation mechanism of HSFL is complex and has always been a research hotspot in this field.In this study,regular LSFL with a period of 760 nm was fabricated in advance on a silicon surface with two-beam interference using an 800 nm,50 fs femtosecond laser.The ultrafast dynamics of HSFL formation on the silicon surface of prefabricated LSFL under single femtosecond laser pulse irradiation were observed and analyzed for the first time using collinear pump-probe imaging method.In general,the evolution of the surface structure undergoes five sequential stages:the LSFL begins to split,becomes uniform HSFL,degenerates into an irregular LSFL,undergoes secondary splitting into a weakly uniform HSFL,and evolves into an irregular LSFL or is submerged.The results indicate that the local enhancement of the submerged nanocavity,or the nanoplasma,in the prefabricated LSFL ridge led to the splitting of the LSFL,and the thermodynamic effect drove the homogenization of the splitting LSFL,which evolved into HSFL.

Spatial structural characteristics of the Deda ancient landslide in the eastern Tibetan Plateau:Insights from Audio-frequency Magnetotellurics and the Microtremor Survey Method

It is of crucial importance to investigate the spatial structures of ancient landslides in the eastern Tibetan Plateau’s alpine canyons as they could provide valuable insights into the evolutionary history of the landslides and indicate the potential for future reactivation.This study examines the Deda ancient landslide,situated in the Chalong-ranbu fault zone,where creep deformation suggests a complex underground structure.By integrating remote sensing,field surveys,Audio-frequency Magnetotellurics(AMT),and Microtremor Survey Method(MSM)techniques,along with engineering geological drilling for validation,to uncover the landslide’s spatial feature s.The research indicates that a fault is developed in the upper part of the Deda ancient landslide,and the gully divides it into Deda landslide accumulation zoneⅠand Deda landslide accumulation zoneⅡin space.The distinctive geological characteristics detectable by MSM in the shallow subsurface and by AMT in deeper layers.The findings include the identification of two sliding zones in the Deda I landslide,the shallow sliding zone(DD-I-S1)depth is approximately 20 m,and the deep sliding zone(DD-I-S2)depth is 36.2-49.9 m.The sliding zone(DD-Ⅱ-S1)depth of the DedaⅡlandslide is 37.6-43.1 m.A novel MSM-based method for sliding zone identification is proposed,achieving less than 5%discrepancy in depth determination when compared with drilling data.These results provide a valuable reference for the spatial structural analysis of large-deepseated landslides in geologically complex regions like the eastern Tibetan Plateau.

A novel model to evaluate spatial structure in thinned conifer-broadleaved mixed natural forests

In order to ensure the effective analysis and reconstruction of forests,it is key to ensure the quantitative description of their spatial structure.In this paper,a distance model for the optimal stand spatial structure based on weighted Voronoi diagrams is proposed.In particular,we provide a novel methodological model for the comprehensive evaluation of the spatial structure of forest stands in natural mixed conifer-broadleaved forests and the formulation of management decision plans.The applicability of the rank evaluation and the optimal solution distance model are compared and assessed for different standard sample plots of natural mixed conifer-broadleaved forests.The effect of crown width on the spatial structure unit of the trees is observed to be higher than that of the diameter at breast height.Moreover,the influence of crown length is greater than that of tree height.There are nine possible spatial structure units determined by the weighted Voronoi diagram for the number of neighboring trees in the central tree,with an average intersection of neighboring crowns reaching 80%.The rank rating of natural forest sample plots is correlated with the optimal solution distance model,and their results are generally consistent for natural forests.However,the rank rating is not able to provide a quantitative assessment.The optimal solution distance model is observed to be more comprehensive than traditional methods for the evaluation of the spatial structure of forest stands.It can effectively reflect the trends in realistic stand spatial structure factors close to or far from the ideal structure point,and accurately assesses the forest spatial structure.The proposed optimal solution distance model improves the integrated evaluation of the spatial structure of forest stands and provides solid theoretical and technical support for sustainable forest management.

Evolution of the Spatial Distribution of Basic Infrastructures and Services in the Niakhar Area (Fatick), Senegal

Basic infrastructures and services present an important socio-economic and territorial equity issue, because the availability of these makes it possible to improve the living conditions of populations, makes territories attractive and stimulates their development. The objective of our study has been achieved, so our results provided information on the rate of propagation of basic infrastructures and services, as well as the evolution of the forms of spatial distribution of the latter. The data used comes from the census and geolocation of basic infrastructures and services in the Niakhar area, carried out by the IRD in 2018. Centrographic measurements were used to describe the overall spatial distribution and the use of chi-square statistics confirmed the existence of a preferential direction of distribution. To verify the existence of a spatial structure of infrastructure and service seeding, the Ripley statistic is used. Our results can be useful for land use planning and spatial resource allocation policies. Indeed, the identification of different types of spatial aggregates and the highlighting of the preferred directions of the distribution of basic infrastructures and services, make it possible to correct disparities in the spatial distribution of basic resources.

Identifying the Spatial Structure of Black Hole and Tropical Cyclone Based on a Theoretical Analysis of Orthogonal Interaction

Black holes are recognized by Newton’s gravitational theory and Einstein’s general relativity, but there is still a lack of understanding the spatial structure of events, especially the nature of event horizon. In this paper, a theoretical analysis is used to compare the structures of tropical cyclone in the atmosphere and black hole in the astronomy so that five results are: 1) Both of them share the similar spatial structure, with tropical cyclone and black hole having the outflow cloud shield and the horizon sphere in the central part, respectively, while four spiral material bands exist in the rotating plane around them;2) In theoretically, the energy density formed by the orthogonal interaction of the four spiral material bands is as times as the total kinetic energy of the head-on interaction;3) This region of high energy density can lead to the conversion from mass to energy and the creation of new physical states of matter, which is a black hole event;4) The outer horizon of a black hole is the outermost interface of events, or the orthogonal interaction interface of particles;5) High-speed plasma jets extended at the poles of the black hole are directly associated with the shear stress of orthogonal interaction.

Trust-region based instantaneous optimal semi-active control of long-span spatially extended structures with MRF-04K damper

In the field of civil engineering, magnetorheological fluid （MRF） damper-based semi-active control systems have received considerable attention for use in protecting structures from natural hazards such as strong earthquakes and high winds. In this paper, the MRF damper-based semi-active control system is applied to a long-span spatially extended structure and its feasibility is discussed. Meanwhile, a _trust-region method based instantaneous optimal semi-active control algorithm （TIOC） is proposed to improve the performance of the semi-active control system in a multiple damper situation. The proposed TIOC describes the control process as a bounded constraint optimization problem, in which an optimal semi- active control force vector is solved by the trust-region method in every control step to minimize the structural responses. A numerical example of a railway station roof structure installed with MRF-04K dampers is presented. First, a modified Bouc- Wen model is utilized to describe the behavior of the selected MRF-04K damper. Then, two semi-active control systems, including the well-known clipped-optimal controller and the proposed TIOC controller, are considered. Based on the characteristics of the long-span spatially extended structure, the performance of the control system is evaluated under uniform earthquake excitation and travelling-wave excitation with different apparent velocities. The simulation results indicate that the MR fluid damper-based semi-active control systems have the potential to mitigate the responses of full-scale long-span spatially extended structures under earthquake hazards. The superiority of the proposed TIOC controller is demonstrated by comparing its control effectiveness with the clipped-optimal controller for several different cases.

Static and Dynamic Analyses of Long-Span Spatial Steel-Cable-Membrane Hybrid Structures

With the increment of the complexity of structural systems and the span of spatial structures, the interactions between parts of the structures, especially between some flexible substructures, become too complex to be analyzed clearly. In this paper, taking an actual gymnasium of a long-span spatial steel-cable-membrane hybrid structure as the calculation model, the static and dynamic analyses of the hybrid structures are performed by employing the global analysis of the whole hybrid structure and the substructural analysis of the truss arch substructure, the cable-membrane substructure, etc. In addition, the comparison of stresses and displacements of structural members in the global and substructural analyses is made. The numerical results show that serious errors exist in the substructural analysis of the hybrid structure, and the global analysis is necessary for the hybrid structure under the excitation of static loads and seismic loads.

Topology Structure Synthesis and Analysis of Spatial Pyramid Deployable Truss Structures for Satellite SAR Antenna

Many attentions for structural synthesis are paid to planar linkages and parallel mechanisms, while design novel pyramid deployable truss structure（PDTS） of satellite SAR mainly depends on experience of designer. To design novel configuration of PDTS, a two-step topology structure synthesis and analysis approach is proposed. Firstly, a conceptual configuration of PDTS is synthesized. Weighted graph and weighted adjacency matrix are established to realize topological description for PDTS. Graph properties are then summarized to distinguish differentia between PDTS and other type structures. According to graph properties, a procedure for synthesis conceptual configuration of PDTS is presented. Secondly, join relationship of components in a PDTS is analyzed. Kinematic chain and corresponding incidence/adjacency matrix are employed to analyze join relationship of PDTS. Properties and simplified rules of kinematic chain are extracted to construct kinematic chain. A procedure for construction kinematic chain of PDTS is then established. Finally, with this two-step approach all 11 rectangular pyramid deployable structures whose folded state is planar are discovered and their kinematic chains are constructed. Based on synthesis results, a novel deployable support structure for satellite SAR is designed. The proposed research can be applied to obtain some novel PDTSs, which is of great importance to design some novel deployable support structures for satellite SAR antenna.

Seismic isolation analysis of FPS bearings in spatial lattice shell structures

A theoretical model of a friction pendulum system （FPS） is introduced to examine its application for the seismic isolation of spatial lattice shell structures. An equation of motion of the lattice shell with FPS bearings is developed. Then, seismic isolation studies are performed for both double-layer and single-layer lattice shell structures under different seismic input and design parameters of the FPS. The influence of frictional coefficients and radius of the FPS on seismic performance are discussed. Based on the study, some suggestions for seismic isolation design of lattice shells with FPS bearings are given and conclusions are made which could be helpful in the application of FPS.

Anomaly Models of Spatial Structures for Copper-Molybdenum Ore Deposits and their Application

This paper discusses the enrichment and depletion regularities for porphyry coppermolybdenum ore deposits in different regions and varied deposit genetic types in the same area, taking three porphyry copper-molybdenum ore deposits （i.e., the Chengmenshan in Jiangxi, Wunugetushan in Inner Mongolia, Baishantang in Gansu） and two copper deposits in Gansu Province （the Huitongshan skarn deposit and Gongpoquan composite deposit） as case studies. The results show that porphyry Cu-Mo deposits or skarn copper deposits include both enrichment of the ore-forming elements and associated elements, and depletion of some lithophile dispersed elements, rare earth elements （REE） and some major elements. And the depleted elements vary with deposits, having generality and their own features. On a deposit scale, the positive anomalies of enriched elements and negative anomalies of depleted elements follow in a sequence to comprise regular anomaly models of spatial structures. The exploration in the Tongchang deposit in Jiangxi and Huitongshan deposit in Gansu suggests that anomaly models play a key role in the identification of mineral occurrences and deposits compared to one single enriched element anomaly. And the anomaly models exert a critical effect on the optimization of prospecting targets and their potential evaluation.

Community structure and spatial distribution of macrobenthos in the shelf area of the Bering Sea

Field investigations of marine macrobenthos were conducted at ten sites in the Bering Sea in July 2010. Altogether 90 species of macrobenthos belonging to 59 families and 78 genera were identified. Among them, 41 polychaetes, 16 mollusks, 23 crustaceans, three echinoderms, two cnidarians, one nemertean, one priapulid, two sipunculids, and one echiuran were identified. The average density and biomass of total macrobenthos were 984 ind./m2 and 1207.1 g/ma of wet weight, respectively. The predominant species in the study area were Scoloplos armiger, Eudorella pacifica, Ophiura sarsii, Heteromastus filiformis, Ennucula tenuis, and Harpiniopsis vadiculus by abundance, while the predominant species in this area was Echinarachnius parma by biomass. Hierarchical cluster analysis （Bray-Curtis similarity measure） revealed that two impor- tant benthic assemblages in the study area were CommunityA and Community B. CommunityA was stable and Community B was unstable, as shown by the Abundance/Biomass Comparisons （ABC） approach. The macrobenthic community structure in the shelf of the Bering Sea was characterized by its high abundance and biomass, high productivity but great heterogeneity.

An experimental study of the spatial structures of the instabilities of longshore currents on plane beaches

A laboratory experiment on alongshore currents is conducted for two plane beaches with slopes 1：40 and 1：i00 to investigate the instability of alongshore currents. The dye release experiment is also performed synchronously in surf zone. Complicated and strongly unstable motions of alongshore currents are observed in the experiment. To examine the spatial and temporal variations of the shear instabilities of longshore clearly, dye batches are released in surf zone. The deformation of the dye patch is observed efficiently and effectively with charge coupled device （CCD） system. Some essential characteristics of the shear instability are validated from the results of image analyses of the temporal variation of the dye patch. The influences of alongshore currents, Stokes drift, large-scale vorticity and the shear instabilities on the transport of dye are analyzed using the collected images. The spatial structure of the instabilities of longshore currents is studied by analyzing collected images of the dye patch. And the phase velocity of the meandering movements is obtained through measuring the movement distances of the oscillations of dye patch in alongshore direction with time. The results suggest that the propagation speed of the shear instability is approximately 5070 7570 of maximum of mean alongshore currents for irregular and regular waves. The calculated propagation speed using a linear instability analysis theory is compared with the experimental results. The comparison shows agreements between them.

Strength failure of spatial reticulated structures under multi-support excitation

Under strong earthquakes, long-span spatial latticed structures may collapse due to dynamic instability or strength failure. The elasto-plastic dynamic behaviors of three spatial latticed structures, including two double-layer cylindrical shells and one spherical shell constructed for the 2008 Olympic Games in Beijing, were quantitatively examined under multi-support excitation （MSE） and uniform support excitation （USE）. In the numerical analyses, several important parameters were investigated such as the peak acceleration and displacement responses at key joints, the number and distribution of plastic members, and the deformation of the shell at the moment of collapse. Analysis results reveal the features and the failure mechanism of the spatial latticed structures under MSE and USE. In both scenarios, the double-layer reticulated shell collapses in the ＂overflow＂ mode, and the collapse is governed by the number of invalid plastic members rather than the total number of plastic members, beginning with damage to some of the local regions near the supports. By comparing the numbers and distributions of the plastic members under MSE to those under USE, it was observed that the plastic members spread more sufficiently and the internal forces are more uniform under MSE, especially in cases of lower apparent velocities in soils. Due to the effects of pseudo-static displacement, the stresses in the members near the supports under MSE are higher than those under USE.

Spatial structure and seasonal changes of nekton assemblages in the Taiwan Strait

The Taiwan Strait is a transition zone between the East China Sea and the South China Sea with unique hydrology and a geographical environment that creates special marine community features.To analyze the spatial structure and seasonal changes of the nekton assemblages in the Taiwan Strait,seasonal experimental trawl surveys were conducted during 2006-2007.The results showed that there were two assemblages in the area with different sets of species,and the average similarity within each group varies between 39.38% and 74.20%.By using multivariate statistical analysis and analyzing the distribution of dominant species,we found that the structures of the assemblages had obvious seasonal variation.The middle region from the Putian transect to the Xiamen transect could be considered a mixing area for the two assemblages.The analysis of the relationship between species assemblages and environmental factors indicated that temperature was the most important factor affecting the community structure in cold seasons,and 22.5°C and 17°C could be considered dividing lines for spring and winter,respectively.In warm seasons,the most important factor was water depth,but the relationship with depth was not as significant,with a correlation between 0.264 and 0.399.The seasonal changes of nekton assemblages basically reflected the dynamic currents in the Taiwan Strait.The south coastal assemblage extended to nearly the entire area of the Taiwan Strait along with a strong and intense warm current that shrinks in spring and winter when the southward intrusion of the cold Zhejiang-Fujian coastal current becomes stronger.The impact of shortterm and long-term environmental changes,such as extreme weather,global warming and human activity on nekton assemblages,had been recognized but need further research.Our study on nekton assemblages could be used as a baseline for measuring future changes.

Spatial pattern analysis for quantification of landscape structure of Tadoba-Andhari Tiger Reserve,Central India

Landscape structure is often regarded as an important factor that governs the distribution and abundance of species. Therefore it is critical to understand the landscapes and their dynamics. Patterns of landscape elements strongly influence the ecological characteristics. This study was designed to document and map the current status of the tropi-cal dry deciduous forest of the Tadoba-Andhari Tiger Reserve （TATR）, Central India, （using IRS P6 LISS IV data） and to describe its landscape structure at three levels of organization viz. landscape, class, and patch. The study area was classified into 10 land cover classes that include 6 vegetation classes. The landscape structure was analyzed using FRAG-STATS using 12 set of indices. The TATR landscapes have a total of 2,307 patches with a mean patch size of 25.67 ha and patch density of 1.7 patches per km2. Amongst all land cover classes, mixed bamboo forest is dominant-it occupied maximum area （77.99%）-while riparian forest is least represented （0.32%）. Mixed forest has maximum number of patches among all vegetation classes. Results have shown that despite being dominant in the area, mixed bamboo forest has low patch density （0.25/100 ha）. Dominance of mixed bamboo forest is attributed to large patch sizes and not to the number of patches. This study has focussed on the approach of integrating satellite forest classification and forest inven-tory data for studying forest landscape patterns.

Spatial structure optimization of mountainous abandoned mine land reuse based on system dynamics model and CLUE-S model

The mountainous abandoned mine land is often distributed in the fomi of fragmented patches. Therefore, it can greatly promote the reuse value of abandoned mine land and relieve the pressure of land demand to realize the rational reuse of abandoned mine land based on the future land use structure and spatial layout of mountainous area. In this paper, optimization of the spatial structure of mountainous abandoned mine land reuse is realized through the system dynamics model and CLUE-S model. Mentougou district, Beijing, China is selected as the research area. System dynamics model with feedback functions is constructed to simulate land use structure from 2011 to 2025, which is taken as the quanfiiative constraint on spatial structure optimization. CLUE-S model with neighborhood analysis function is applied to simulate future land use spatial structure. The simulation result layer is superimposed with the abandoned mine land distribution layer and the optimized spatial structure of abandoned mine land reuse then is determined, checked by reuse suitability evaluation. The result shows that abandoned mine land can be fully optimized as other land use types according to demand, and the reuse directions are water conservancy facilities land, urban land, rural residential land, tourism land, garden land, woodland and grassland. The trend of abandoned mine land reuse tend to be consistent with land use types of neighboring patches. This study can provide theoretical reference for the practices of mountainous abandoned mine land reuse.

Nonlinearity Modulating Intensities and Spatial Structures of Central Pacific and Eastern Pacific El Nio Events

This paper compares data from linearized and nonlinear Zebiak-Cane model, as constrained by observed sea surface temperature anomaly （SSTA）, in simulating central Pacific （CP） and eastern Pacific （EP） E1 Nino. The difference between the temperature advections （determined by subtracting those of the linearized model from those of the nonlinear model）, referred to here as the nonlinearly induced temperature advection change （NTA）, is analyzed. The results demonstrate that the NTA records warming in the central equatorial Pacific during CP E1 Nino and makes fewer contributions to the structural distinctions of the CP E1 Nino, whereas it records warming in the eastern equatorial Pacific during EP E1 Nino, and thus significantly promotes EP E1 Nino during E1 Nino-type selection. The NTA for CP and EP E1 Nino varies in its amplitude, and is smaller in CP E1 Nino than it is in EP E1 Nino. These results demonstrate that CP E1 Nino are weakly modulated by small intensities of NTA, and may be controlled by weak nonlinearity; whereas, EP E1 Nino are significantly enhanced by large amplitudes of NTA, and are therefore likely to be modulated by relatively strong nonlinearity. These data could explain why CP E1 Nino are weaker than EP E1 Nino. Because the NTA for CP and EP E1 Nino differs in spatial structures and intensities, as well as their roles within different E1 Nino modes, the diversity of E1 Nino may be closely related to changes in the nonlinear characteristics of the tropical Pacific.

Spatial Structure,Hierarchy and Formation Mechanisms of Scientific Collaboration Networks:Evidence of the Belt and Road Regions

Scientific collaboration has become an important part of the people-to-people exchanges in the Belt and Road initiative,and remarkable progress has been made since 2013.Taking the 65 countries along the Belt and Road(BRI countries)as the research areas and using collaborated Web of Science(WOS)core collection papers to construct an international scientific collaboration matrix,the paper explores the spatial structure,hierarchy and formation mechanisms of scientific collaboration networks of 65 countries along the Belt and Road.The results show that:1)Beyond the Belt and Road regions(BRI regions),Central&Eastern Europe,China and West Asia&North Africa have formed a situation in which they all have the most external links with other countries beyond BRI regions.China has the dominant role over other BRI countries in generating scientific links.The overall spatial structure has changed to a skeleton structure consisting of many dense regions,such as Europe,North America,East Asia and Oceania.2)Within the Belt and Road regions,Central&Eastern Europe has become the largest collaboration partner with other sub-regions in BRI countries.The spatial structure of scientific collaboration networks has transformed from the‘dual core’composed of China and the Central&Eastern Europe region,to the‘multi-polarization’composed of‘one zone and multi-points’.3)The hierarchical structure of scientific collaboration networks presents a typical‘core-periphery’structure,and changes from‘single core’to‘double cores’.4)Among the formation mechanisms of scientific collaboration networks,scientific research strength and social proximity play the most important roles,while geographical distance gradually weakens the hindrance to scientific collaboration.

Evaluation of the performance of alternative assessment configurations to account for the spatial heterogeneity in age-structure: a simulation study based on Indian Ocean albacore tuna

Various population structures or spatial heterogeneities in population distribution have been an important source of model misspecification and have had an impact on estimation performance in fisheries stock assessment.In this study,we simulated the Indian Ocean albacore spatial heterogeneity in age-structure using Stock Synthesis according to the stage-dependent migration rate and region-dependent fishing mortality rate and generated the stock assessment data.Based on these data,we investigated the performances of different spatial configurations,selectivity curves and selections of CPUE(catch per unit effort)indices of the assessment models which were used to account for spatial heterogeneity.The results showed:(1)although the spatially explicit configurations,which exactly matched the operating model,provided unbiased and accurate estimates of relative spawning biomass,relative fishing mortality rate and maximum sustainable yield in all simulation scenarios,their performance may be very poor if there were mismatches between them and the operating model due to gaps in knowledge and data;(2)for spatially explicit assessment configuration,the correct boundary was required,but for non-spatially explicit assessment configuration,it seemed more important for analysts to partition the area to properly reflect the transition in field data and to effectively account for the impacts of ignoring the spatial structure by using the additional spatially referenced parameters;(3)although the areas-as-fleets methods and flexible time-varying selectivity curves could be used as better alternative approaches to account for spatial structure,these configurations could not completely eliminate the impacts of model misspecification and the quality of estimates of different quantities from the same assessment model may be inconsistent or the performance of the same assessment configuration may fluctuate significantly between simulation scenarios;(4)although the worst estimates could generally be avoided by using multiple CPUE indices,there were no best solutions to select or regenerate the CPUE indices to account for the impacts of the ignored spatial structure to obviously improve the quality of stock assessment.Compared with the results of assessment model configurations which are used to account for the spatial structure by different modelers,the performances of the configurations are always casespecific except for spatially explicit configurations which exactly match the operating model.In this sense,our study will not only provide some insights into the current Indian Ocean albacore stock assessment but also enrich existing knowledge regarding the performance of assessment configurations to account for spatial structure.