Tailoring Iron-Ion Release of Cellulose-Based Aerogel-Coated Iron Foam for Long-Term High-Power Microbial Fuel Cells

The presence of iron(Fe) has been found to favor power generation in microbial fuel cells(MFCs). To achieve long-term power production in MFCs, it is crucial to effectively tailor the release of Fe ions over extended operating periods. In this study, we developed a composite anode(A/IF) by coating iron foam with cellulose-based aerogel. The concentration of Fe ions in the anode solution of A/IF anode reaches 0.280 μg/mL(Fe^(2+) vs. Fe^(3+) = 61%:39%) after 720 h of aseptic primary cell operation. This value was significantly higher than that(0.198 μg/mL, Fe^(2+) vs. Fe^(3+) = 92%:8%) on uncoated iron foam(IF), indicating a continuous release of Fe ions over long-term operation. Notably, the resulting MFCs hybrid cell exhibited a 23% reduction in Fe ion concentration(compared to a 47% reduction for the IF anode) during the sixth testing cycle(600-720 h). It achieved a high-power density of 301 ± 55 mW/m^(2) at 720 h, which was 2.62 times higher than that of the IF anode during the same period. Furthermore, a sedimentary microbial fuel cell(SMFCs) was constructed in a marine environment, and the A/IF anode demonstrated a power density of 103 ± 3 mW/m^(2) at 3240 h, representing a 75% improvement over the IF anode. These findings elucidate the significant enhancement in long-term power production performance of MFCs achieved through effective tailoring of Fe ions release during operation.

Spatiotemporal phase change materials for thermal energy long-term storage and controllable release

Phase change materials(PCMs)have attracted much attention in the field of solar thermal utilization recently,due to their outstanding thermal energy storage performance.However,PCMs usually release their stored latent heat spontaneously as the temperature below the phase transition temperature,rendering thermal energy storage and release uncontrollable,thus hindering their practical application in time and space.Herein,we developed erythritol/sodium carboxymethylcellulose/tetrasodium ethylenediaminetetraacetate(ERY/CMC/EDTA-4Na)composite PCMs with novel spatiotemporal thermal energy storage properties,defined as spatiotemporal PCMs(STPCMs),which exhibit the capacity of thermal energy long-term storage and controllable release.Our results show that the composite PCMs are unable to lose latent heat due to spontaneous crystallization during cooling,but can controllably release thermal energy through cold crystallization during reheating.The cold-crystallization temperature and enthalpy of composite PCMs can be adjusted by proportional addition of EDTA-4Na to the composite.When the mass fractions of CMC and EDTA-4Na are both 10%,the composite PCMs can exhibit the optical coldcrystallization temperature of 51.7℃ and enthalpy of 178.1 J/g.The supercooled composite PCMs without latent heat release can be maintained at room temperature(10-25℃)for up to more than two months,and subsequently the stored latent heat can be controllably released by means of thermal triggering or heterogeneous nucleation.Our findings provide novel insights into the design and construction of new PCMs with spatiotemporal performance of thermal energy long-term storage and controllable release,and consequently open a new door for the development of advanced solar thermal utilization techniques on the basis of STPCMs.

Effect of Slow and Controlled Release Fertilizers on the Yield and Nutrient Use Efficiency of Hot Pepper in Qiu-bei

[Objective] The aim of this study was to investigate the impacts of slow and controlled release fertilizers（SCRF）on the yield of qiubei hot pepper,its nutrient use efficiency and environment.[Method] Using Qiubei hot pepper（Capsicum frutescens L.）as the experimental material,we studied the fertilization effect and environment-protecting effect of SCRF.[Result] The result showed that SCRF could improve the agronomic characteristics of hot pepper.Compared to singly applied common fertilizers,SCRF increased economic yield by 20.90% and economic benefit by 13 234.35 Yuan/hm2,and the ratio of output to input was improved by 47.93%.In comparison with common straight fertilizers at same NPK proportion and rate,SCRF increased economic yield by 5.26% and economic benefit by 5 554.80 Yuan/hm2,and the ratio of output to input was improved by 9.91%.Under the reduced use of SCRF by 20%,SCRF increased economic yield by 12.38% and economic benefit by 9595.20 Yuan/hm2 compared with singly applied common fertilizers,and the ratio of output to input was improved by 65.95%.SCRF improved nitrogen,phosphorus and potassium use efficiencies by 12.42-17.53,3.35-5.24 and 5.37-14.02 percents respectively.[Conclusion] As the result of much reduced N and P application rates,SCRF would significantly economize fertilizer resources and minimize the pollution caused by the loss of fertilizer nutrients,which is of practical importance for environment protection.

Preliminary Discussion on Research Progress and Prospect of Slow Released Fertilizers

Slow/controlled release fertilizers （SRFs/CRFs） have been paid more at- tentions by the researchersin recent years. In this paper, the application effects and methods, types, current problem and development prospect of SRFs/CRFsboth at home and abroad were reviewed. The production principles and processes of urea- formaldehyde slow release fertilizers were introduced; and It is suggested that the urea-formaldehyde slow release fertilizers show great development to ease energy and environment pressure.

Effects of Slow Release Fertilizer on the Yield and Nutrient Use Efficiency of Carnation and Its Environmental Protection Effect

[Objective] The aim was to study the effects of slow release fertilizer on the yield,economic benefit and nutrient use efficiency of carnation and environmental pollution.[Method] Taking carnation（Dianthus caryophyllus）as research object,the application effect and environmental protection effect of slow release fertilizer on carnation were discussed through field plot test.[Result] The main agronomic characters of carnation improved after the application of slow release fertilizer;compared with Conv-F treatment,the yield of carnation with slow release fertilizer increased by 18.67%-20.83%,and its economic benefit increased by 105 500 yuan/hm2,while the ratio of output to input improved by 74.29%;under the same NPK ratio and nutrient amount,the yield,economic benefit and ratio of output to input of carnation after the application of slow release fertilizer increased by 2.11%,14 800 yuan and 16.2%,respectively;besides,the application of slow release fertilizer improved the nutrient use efficiency of carnation,and N,P and K nutrient use efficiency in Opt-F-0.7% treatment increased by 13.88%,8.57% and 30.14% compared with Conv-F treatment.[Conclusion] Slow release fertilizer could not only reduce the waste of fertilizer resources and improve fertilizer use efficiency but also decrease the pollution caused by nutrient loss,which had important practical significance for protecting ecological environment and promoting the sustainable development of agriculture.

Effects of a New Long-term Controlled-release Fertilizer on Growth and Development and Yield of Summer Maize

[Objective] The aim was to select the optimal amount of controlled-release fertilizer and provide theoretical references for controlled-release fertilizers use in summer maize. [Method] Long-term controlled-release fertilizers were applied once at sowing summer maize to explore effects on maize growth, yield, economic profits and environment. [Result] Maize yield reduced a little in the treatment group with 60% CRF, and increased in varying degrees in the rest groups in the range of 1.1%-7.4%, and some showed significant differences. [Conclusion] Controlled-release fertilizers can be applied once at the amount of 80% common fertilizer＇s, with con- sideration of maize yield, nitrogen use rate and economic profits, which is beneficial for summer maize application and promotion in North China.

Application Effect of Water-absorbent Slow Release Nitrogen Fertilizer in Latosol

[Objective] A new-type water-absorbent slow release nitrogen fertilizer（WASRNF） was produced through polymerization reaction. Its physicochemical property and application effect in latosol were studied. Feasibility of using WASRNF to improve the serious problems of latosol in rubber planting area in Hainan Island including vulnerable nutrient, free-running fertilizer and water was studied. [Result] The results showed that raw materials of WASRNF, urea and water-retention material formed co-polymer through hydrogen-bond interaction that the WASRNF contained many hydrophilic groups. The p H value of WASRNF is near neutral and its water absorbent rate in tap water could reach 167.17 g·g-1. The water absorbent rates in latosol leach liquors with water/soil ratios of 1：5, 1：10 and 1：20 were 104.66, 122.93 and 145.38 g·g^-1, respectively. The maximum water holding ratio of latosol increased by 23.72%, 30.89% and 39.68% when 0.5%, 1% and 2% WASRNFs were added to latosol, and water evaporation rate of latosol decreased efficiently. Compared with common urea, WASRNF could slow down the leaching rate of nitrogen and the initial leaching amount was only 22.17% of the total amount. [Conclusion]The results indicated that WASRNF in latosol had strong water absorption and water-retention abilities in addition to the good slow release effect, and could efficiently decrease nutrient loss, increase utilization ratio of water and fertilizer and promote interaction between water and fertilizer.

Effects of slow or controlled release fertilizer types and fertilization modes on yield and quality of rice

There is limited information about the influence of slow or controlled release fertilizer（S/CRF） on rice yield and quality. In this study, japonica rice cultivar Nanjing 9108 was used to study the effects of three different S/CRFs（polymer-coated urea（PCU）, sulfur-coated urea（SCU）, and urea formaldehyde（UF）） and two fertilization modes（both S/CRF and common urea（CU） as basal fertilizer, S/CRF as basal and CU as tillering fertilizer） on rice yield and quality. CU only was applied separately as control（CK）. Results showed that, rice grain yield, chalky kernel rate, chalky area, overall chalkiness, and the content of gliadin, glutenin, and protein, all showed the trends of UF〉PCU〉SCU within the same fertilization mode, and showed the trends of S/CRF as basal and CU as tillering fertilizer〉both S/CRF and CU as basal fertilizer within the same type of S/CRF. In contrast, the contents of amylose, amylopectin, and starch, as well as taste value, and peak and hot viscosity showed trends of SCU〉PCU〉UF, and the trends of both S/CRF and CU as basal fertilizer〉S/CRF as basal and CU as tillering fertilizer. Among S/CRF treatments and fertilization modes, taste values of cooked rice were positively correlated with amylose, amylopectin, and starch contents, as well as gel consistency, peak viscosity, hot viscosity, and cool viscosity, while negatively correlated with globulin, gliadin, glutenin, and protein contents. The types of S/CRF and fertilization modes are important for improving rice yield and quality. Compared to CK, higher yield and similar quality of rice was achieved with UF as basal and CU as tillering fertilizer, and similar yield with improved appearance and eating and cooking quality of rice was achieved with either both UF and CU as basal fertilizer, or PCU as basal and CU as tillering fertilizer.

Characteristics and Performance of Novel Water-Absorbent Slow Release Nitrogen Fertilizers

In this article, a research on the characteristics and performance of water-absorbent slow release nitrogen fertilizer （WASRNF） using infrared spectroscopy （IR）, scanning electronic microscopy （SEM）, differential scanning calorimetry （DSC）, and thermogravimetry analysis （TGA）, was present. The results indicate that the water absorbency and nitrogen analysis of WASRNF is 103 g g^-1 and 30%, respectively, and WASRNF exhibits approximately neutral pH and very low salt index. WASRNF is a copolymer of nitrogen fertilizer and super absorbent polymer （SAP） monomers which is formed through hydrogen bond interaction, and the molecule contains hydrophilic groups, which is responsible for the absorption and water retention capacity of the molecule. WASRNF is a gel that exhibits the ability to swell, but does not dissolve in water. WASRNF shows non-homogenous nature as a whole, but in local zone it is homogenous, the copolymer molecule shows chain network that is the physical structure responsible for absorption and retention of water in WASRNF. The water retained in WASRNF exists as free and nonfreezing bound and freezing bound water states, with the free and the nonfreezing water accounting for more than 95% of water retained in WASRNF, and the nonfreezing bound water for less than 5%. WASRNF functions in delaying the release of nitrogen from it, thereby serving a novel slow release nitrogenous fertilizer.

Release Characteristics of Different N Forms in an Uncoated Slow/Controlled Release Compound Fertilizer

This study examined the release characteristics of different N forms in an uncoated slow/controlled-release compound fertilizer （UCRF） and the N uptake and N-use efficiency by rice plants. Water dissolution, soil leaching, and pot experiments were employed. The dynamics of N release from the UCRF could be quantitatively described by three equations： the first-order kinetics equation [N1=N0 （1-e^-kt）], Elovich equation （N1=a ＋ blnt）, and parabola equation （N1=a ＋ bt^0.5）, with the best fitting by the first-order kinetics equation for different N （r= 0.9569^＊＊-0.9999^＊＊）. The release potentials （No values estimated by the first-order kinetics equation） of different N in the UCRF decreased in the order of total N 〉 DON 〉 urea-N 〉 NH4^＋-N 〉 NO3^-N in water, and total N 〉 NH4^＋-N 〉 DON 〉 urea-N 〉 NO3^--N in soil, respectively, being in accordance with cumulative amounts of N release. The constants of N release rate （k values and b values） for different N forms were in decreasing order of total N 〉 DON 〉 NH4^＋-N 〉 NO3^--N in water, whereas the k values were urea- N 〉DON 〉 NH4^＋-N 〉 total N 〉 NO3^--N, and the b values were total N 〉 NH4^＋-N 〉 DON 〉 NO3^--N 〉 urea-N in soil. Compared with a common compound fertilizer, the N-use efficiency, N-agronomy efficiency, and N-physiological efficiency of the UCRF were increased by 11.4%, 8.32 kg kg^-1, and 5.17 kg kg^-1, respectively. The ratios of different N to total N in the UCRF showed significant correlation with N uptake by rice plants. The findings showed that the first-order kinetics equation [Nt=N0 （l-e^kt）] could be used to describe the release characteristics of different N forms in the fertilizer. The UCRF containing different N forms was more effective in facilitating N uptake by rice compared with the common compound fertilizer containing single urea-N form.

Synthesis and Performance of Polyurethane Coated Urea as Slow/controlled Release Fertilizer

Polyurethane coated urea slow/controlled release fertilizer was prepared based on urea granules, isocyanate, polyols and paraffin. Isocyanate reacted with polyols to synthesize the polyurethane skin layer on urea granules surface. Paraffin serves as a lubricant during syntheses of polyurethane skin layers. The structure and nutrient release characteristics of the polyurethane skin layers were investigated by FTIR, SEM and TG. Urea nitrogen slow-release behavior of the polyurethane coated urea was tested. The experimental results indicated that compact and dense polyurethane skin layers with a thickness of 10-15 lam were formed on urea surface, the urea nitrogen slow-release time can reach 40-50 days. Paraffin proves to play a key role in inhibiting water to penetrate into urea, but excessive addition would decrease the polyurethane crosslinking density.

Differences of yield and nitrogen use efficiency under different applications of slow release fertilizer in spring maize

Excessive or insufficient application of fertilizer has raised broader concerns regarding soil and environmental degradation.One-time application of slow release fertilizer (SF) has been widely used to reduce yield gap with potential maize yield and improve nitrogen use efficiency (NUE).A 2-year field experiment (2018–2019) was conducted to evaluate the effects of SF rates from 0 to 405 kg N ha^(–1) (named F0,SF225,SF270,SF315,SF360,and SF405) and 405 kg N ha^(–1) of common fertilizer(CF405) on the grain yield,biomass and N accumulation,enzymatic activities related with carbon–nitrogen metabolism,NUE and economic analysis.Results indicated that the highest grain yields,NUEs and economic returns were achieved at SF360in both varieties.The enzymatic activities related with carbon–nitrogen metabolism,pre-and post-silking accumulation of biomass and N increased with increasing SF rate,and they were the highest at SF360 and SF405.The grain yield at SF360had no significant difference with that at SF405.However,the N partial factor productivity,N agronomic efficiency and N recovery efficiency at SF360 were 9.8,6.6 and 8.9% higher than that at SF405.The results also indicated that the average grain yields,NUE and economic benefit at SF405 were 5.2,12.3 and 18.1% higher than that at CF405.In conclusion,decreasing N rate from 405 kg ha^(–1)(CF) to 360 kg ha^(–1)(SF) could effectively reduce the yield gap between realized and potential maize yields.The N decreased by 11.1%,but the yield,NUE and economic benefit increased by 3.2,22.2 and 17.5%,which created a simple,efficient and business-friendly system for spring maize production in Jiangsu Province,China.

Synthesis and Characterization of Suspension Polymerized Styrene-Divinylbenzene Porous Microsphere Using as Slow-Release-Active Carrier

Functional porous microspheres used for the slow release carrier of actives in cosmetics or pharmaceuticals were prepared by modified suspension polymerization of styrene （ST） with divinylbenzene （DVB） in the presence of toluene, cyclohexanol and heptane as porogenic diluents. The use of ultrasonic dispersion decreases the beads＇ size and improves the uniformity. The effects of the porogen mixture, DVB content and solvent extraction on the surface performance of the synthesized beads were studied. The microspheres were characterized by scanning electron microscopy （SEM） and BET surface area determination. It was found that a great proportion of the non-solvating porogen increases the pore diameter and the specific surface area. High DVB concentration also results in the great specific surface area and porosity. When the ratio of toluene/cyclohexanol is 1：2, DVB content is at the range of 40%-60% and methylene chloride was used as extractant, the beads with good spherical shape and pore size were obtained. The prepared porous microspheres were applied as active carriers and showed satisfactory slow release effect. Over 10h constantly sustained release was observed in vitro releasing test for hydroquinone-loaded microspheres. Great surface area promoted high concentration of released hydroquinone.

Starch Modification for Slow Release of Herbicide Encapsulated with Concentrated Starch Paste

An attempt on starch modification has been made to increase the paste concentration of potato starch for reducing the energy consumption required for the encapsulation of herbicide within starch matrix by encapsulating 2, 4-D as model herbicide. The matrix behaviors were evaluated in terms of the herbicide content, capability of swelling in water, encapsulation efficiency, and the rate of herbicide released from the matrix. To increase paste concentration of starch for decreasing the energy consumption in dry process, potato starch was acidified before the encapsulation. However, the matrix prepared in such a way showed that it weakened the control to the herbicide encapsulated, which increased the rate of herbicide released from the matrix. By introducing covalent bonds among starch molecules, the problem with the control and release rate can be completely solved. Moreover, the effects of formaldehyde amount, medium pH, herbicide content, and particle size on the matrix behaviors and release rate were also investigated. The newly developed matrix shows low capability of swelling and slow release, and reduces water evaporation in dry process by about 40% during matrix preparation.

Mechanism in Using Commercial High Efficient Zeolite-Base Greenfeed Slow Release Fertilizers

Fertilizer issues such as overuse, leaching and soil degradation are becoming severe?in?worldwide plantation areas. To secure current food production, prevention measures on these issues are relatively limited on agricultural production areas. Slow release fertilizer is prevailing over past years due to its significant effects on prevention of fertilizer leaching and less harm to soil and underground water. We presented here the mechanisms of a novel zeolite-based slow release fertilizer including its properties as reservoirs of nutrients, pH balancer and also water retainer in soil. By providing sufficient nutrients to soil, this fertilizer has commercially proven to give better growing environment to grower as well as labor saving and cost saving.

Application of Lignin and Its Derivatives as Slow/Controlled Release Materials in Agricultural Fields

Lignin is the main by-product of pulp and papermaking and is not effectively utilized. Conversion of industrial lignins into value-added materials is beneficial for the effective utilization of resources as well as for environmental protection. Because of their adsorptivity, slow-release property,biocompatibility, and biodegradability, lignin and its derivatives find potential applications as eco-friendly slow/controlled release materials in agricultural fields. This report reviews the recent research advances in lignin-based slow/controlled release fertilizers and pesticides.

Effects of Slow-release Fertilizers and Sugarcane-specific Fertilizers on Yield and Quality of Sugarcane

The effects of slow-release fertilizers and sugarcane-specific fertilizers on the growth and quality of sugarcane were studied to provide a theoretical basis for cultivation of sugarcane with lower costs but higher efficiency. Field experiments were carried out in two major sugarcane areas in Guangxi and three fertilization treatments were studied: single application of compound fertilizers( treatment I),compound fertilizers + slow-release fertilizers( treatment II) and sugarcane-specific base fertilizers + sugarcane-specific topdressing( treatment III). Effects of equal fertilization conditions of treatment I,II and III on growth,yield and sugar of sugarcane were studied. The three fertilization treatments had little effects on emergence,tillering,and effective stems of sugarcane,but compared with the treatment of compound fertilizer( treatment I) with a ratio of N,P,and K of 1∶1∶1,treatment II using slow-release fertilizers as topdressing had better growth,higher plant height and stem diameter,so the yield was higher. Treatment III designed sugarcane-specific fertilizers with proper ratio according to fertilizer demands of sugarcane. Besides,the treatment III sugarcane-specific base fertilizers,containing certain amount of organic matters,could promote the sugar accumulation of sugarcane. Therefore,the sugarcane yield of treatment III was higher than that of treatment II. In conclusion,slow-release fertilizers and sugarcane-specific fertilizers can significantly increase sugarcane yield,especially sugarcane-specific fertilizers. Sugarcane-specific fertilizers have reasonable ratio and contain certain amount of organic matters,and can increase sugar content,obtain significant economic benefits,so it is worth popularization in large areas.

Effect of slow-release iron fertilizer on iron-deficiency chlorosis, yield and quality of Lilium davidii var.unicolor in a two-year field experiment

Iron deficiency chlorosis of Lilium davidii var. unicolor is often the case in practice in alkaline soils of northwest region of China. It is difficult to control iron chlorosis because of high cost and short effective work time of conventional iron fertilizers. In this study, a 2-year field experiment was conducted to evaluate the effects of two slow-release fertilizers on the suppression of iron deficiency chlorosis, soil chemical properties, and the yield and quality of L. davidii var. unicolor. Results show that both coated slow-release iron fertilizers and embedded slow-release iron fertilizer effectively controlled iron-deficiency chlorosis. The application of slow-release iron fertilizers significantly increased plant height and chlorophyll content of L. davidii var. unicolor at different growth stages. Furthermore, coated iron fertilizer application significantly increased starch, protein, soluble sugar and vitamin C content of L. davidii var. unicolor, and it also significantly improved total amino acid content, with increases in essential amino acids(Trp, Leu, Lys, Phe, Val, and Thr contents) and in nonessential amino acids(Asp, Glu, Cit, Ihs, Acc, Ala, Pro, and Cys contents). It was concluded that application of coated slow-release iron fertilizer could be a promising option for suppression of iron deficiency chlorosis and deserves further study.

Synthesis and Characterization of Suspension Polymerized Styrene-Divinylbenzene Porous Microsphere Using as Slow-Release-Active Carrier

Functional porous microspheres used for the slow release carrier of actives in cosmetics or pharmaceu- ticals were prepared by modified suspension polymerization of styrene (ST) with divinylbenzene (DVB) in the presence of toluene, cyclohexanol and heptane as porogenic diluents. The use of ultrasonic dispersion decreases the beads’ size and improves the uniformity. The effects of the porogen mixture, DVB content and solvent extraction on the surface performance of the synthesized beads were studied. The microspheres were characterized by scanning electron microscopy (SEM) and BET surface area determination. It was found that a great proportion of the non-solvating porogen increases the pore diameter and the specific surface area. High DVB concentration also re- sults in the great specific surface area and porosity. When the ratio of toluene/cyclohexanol is 1:2, DVB content is at the range of 40%—60% and methylene chloride was used as extractant, the beads with good spherical shape and pore size were obtained. The prepared porous microspheres were applied as active carriers and showed satisfactory slow release effect. Over 10h constantly sustained release was observed in vitro releasing test for hydro- quinone-loaded microspheres. Great surface area promoted high concentration of released hydroquinone.

Production Technology and Application of Slow-Release Non-protein Nitrogen Extruded Feed Additive

Slow-release non-protein nitrogen feed has a large market demand. It has a long research history, but its production technology needs further improvement in order to realize the industrial production of slow-release non-protein nitrogen extruded feed. By designing the best formula and using chelating and emulsifying process, the slow-release non-protein nitrogen extruded feed additives were produced. This product increases milk yield and improves milk quality, thus increasing economic efficiency.