Two-dimensional particle-in-cell modeling of blow-off impulse by X-ray irradiation

Space objects such as spacecraft or missiles may be exposed to intense X-rays in outer space,leading to severe damage.The reinforcement of these objects to reduce the damage caused by X-ray irradiation is a significant concern.The blow-off impulse(BOI)is a crucial physical quantity for investigating material damage induced by X-ray irradiation.However,the accurate calculation of BOI is challenging,particularly for large deformations of materials with complex configurations.In this study,we develop a novel two-dimensional particle-in-cell code,Xablation2D,to calculate BOIs under far-field X-ray irradiation.This significantly reduces the dependence of the numerical simulation on the grid shape.The reliability of this code is verified by simulation results from open-source codes,and the calculated BOIs are consistent with the experimental and analytical results.

Dynamic propagation velocity of a positive streamer in a 3 m air gap under lightning impulse voltage

Streamers represent an important stage in the initiation of gap discharge. In this work, we used an eight-frame intensified charge-coupled device camera to capture the streamer development process when a lightning impulse voltage of 95%–100% U50% was applied in a 3 m rod–plate gap and the streamer velocity was analyzed. Analysis of the observations shows that streamer velocity can be defined by three stages: rapid velocity decline(stage 1), rapid velocity rise(stage 2)and slow velocity decline(stage 3). The effects of electrode shape, applied voltage and gap breakdown or withstanding on streamer velocity were analyzed. The electrode with a larger radius of curvature will result in a higher initial velocity, and a higher voltage amplitude will cause the streamer to propagate faster at stage 3. Gap withstanding or breakdown has no obvious effect on streamer velocity. In addition, the experimental results are compared with previous results and the statistical characteristics of the primary streamer discharge are discussed.

Force and impulse multi-sensor based on flexible gate dielectric field effect transistor

Nowadays,force sensors play an important role in industrial production,electronic information,medical health,and many other fields.Two-dimensional material-based filed effect transistor(2D-FET)sensors are competitive with nano-level size,lower power consumption,and accurate response.However,few of them has the capability of impulse detection which is a path function,expressing the cumulative effect of the force on the particle over a period of time.Herein we fabricated the flexible polymethyl methacrylate(PMMA)gate dielectric MoS_(2)-FET for force and impulse sensor application.We systematically investigated the responses of the sensor to constant force and varying forces,and achieved the conversion factors of the drain current signals(I_(ds))to the detected impulse(I).The applied force was detected and recorded by I_(ds)with a low power consumption of~30 nW.The sensitivity of the device can reach~8000%and the 4×1 sensor array is able to detect and locate the normal force applied on it.Moreover,there was almost no performance loss for the device as left in the air for two months.

ON DE FINETTI'S OPTIMAL IMPULSE DIVIDEND CONTROL PROBLEM UNDER CHAPTER 11 BANKRUPTCY

Motivated by recent advances made in the study of dividend control and risk management problems involving the U.S.bankruptcy code,in this paper we follow[44]to revisit the De Finetti dividend control problem under the reorganization process and the regulator's intervention documented in U.S.Chapter 11 bankruptcy.We do this by further accommodating the fixed transaction costs on dividends to imitate the real-world procedure of dividend payments.Incorporating the fixed transaction costs transforms the targeting optimal dividend problem into an impulse control problem rather than a singular control problem,and hence computations and proofs that are distinct from[44]are needed.To account for the financial stress that is due to the more subtle concept of Chapter 11 bankruptcy,the surplus process after dividends is driven by a piece-wise spectrally negative Lévy process with endogenous regime switching.Some explicit expressions of the expected net present values under a double barrier dividend strategy,new to the literature,are established in terms of scale functions.With the help of these expressions,we are able to characterize the optimal strategy among the set of admissible double barrier dividend strategies.When the tail of the Lévy measure is log-convex,this optimal double barrier dividend strategy is then verified as the optimal dividend strategy,solving our optimal impulse control problem.

Direction finding of bistatic MIMO radar in strong impulse noise

For bistatic multiple-input multiple-output(MIMO)radar,this paper presents a robust and direction finding method in strong impulse noise environment.By means of a new lower order covariance,the method is effective in suppressing impulse noise and achieving superior direction finding performance using the maximum likelihood(ML)estimation method.A quantum equilibrium optimizer algorithm(QEOA)is devised to resolve the corresponding objective function for efficient and accurate direc-tion finding.The results of simulation reveal the capability of the presented method in success rate and root mean square error over existing direction-finding methods in different application situations,e.g.,locating coherent signal sources with very few snapshots in strong impulse noise.Other than that,the Cramér-Rao bound(CRB)under impulse noise environment has been drawn to test the capability of the presented method.

基于Impulse 7000DP对除颤监护仪的质控方法研究

除颤监护仪是用于临床抢救的医疗设备,凭借其疗效确切、作用快、操作简便等优势,广泛应用于各级医疗单位中。该仪器是临床上经常使用的高风险医疗设备,其释放能量的准确性直接影响到其救治效果,因此必须定期进行检测。本文按照JJF 1149—2014《心脏除颤器校准规范》中针对除颤监护仪的校准方法,使用除颤器/经皮起搏器分析仪Impulse 7000DP对除颤监护仪的质控方法展开研究。

Saccades of video head impulse test in Meniere's disease and Vestibular Migraine: What can we learn from?

Background:Saccades are often observed on video head impulse tests(vHIT)in patients with Meniere's Disease(MD)and Vestibular Migraine(VM).However,their saccadic features are not fully described.Objective:This study aims to identify the saccades characteristics of MD and VM.Methods:75 VM patients and 103 definite unilateral MD patients were enrolled in this study.First raw saccades were exported and analyzed.The VM patients were divided into left and right based on their ears,while the MD patients were separated into affected and unaffected subgroups based on their audiograms and symptoms.Results:The MD patients have more saccades on the affected side(85%vs.69%),and saccade velocity is more consistent than the contralateral side(shown by the coefficient of variation).The saccades occurrence rates on both sides are similar in VM(77%vs.76%),as are other saccadic parameters.The MD patients have more significant inter-aural differences than the VM patients,manifested in higher velocity(p-value 0.000),earlier arriving(p-value 0.010),and more time-domain gathered(p-value 0.003)on the affected side.Conclusions:Bilateral saccades are commonly observed in MD and VM.In contrast to MD,saccades on VM are subtle,scattered,and late-arrived.Furthermore,the MD patients showed inconsistent saccadic distribution with more velocity-uniform saccades on the affected side.

Acoustic radiation force impulse predicts long-term outcomes in a large-scale cohort:High liver cancer,low comorbidity in hepatitis B virus

BACKGROUND Acoustic radiation force impulse(ARFI)is used to measure liver fibrosis and predict outcomes.The performance of elastography in assessment of fibrosis is poorer in hepatitis B virus(HBV)than in other etiologies of chronic liver disease.AIM To evaluate the performance of ARFI in long-term outcome prediction among different etiologies of chronic liver disease.METHODS Consecutive patients who received an ARFI study between 2011 and 2018 were enrolled.After excluding dual infection,alcoholism,autoimmune hepatitis,and others with incomplete data,this retrospective cohort were divided into hepatitis B(HBV,n=1064),hepatitis C(HCV,n=507),and non-HBV,non-HCV(NBNC,n=391)groups.The indexed cases were linked to cancer registration(1987-2020)and national mortality databases.The differences in morbidity and mortality among the groups were analyzed.RESULTS At the enrollment,the HBV group showed more males(77.5%),a higher prevalence of prediagnosed hepatocellular carcinoma(HCC),and a lower prevalence of comorbidities than the other groups(P<0.001).The HCV group was older and had a lower platelet count and higher ARFI score than the other groups(P<0.001).The NBNC group showed a higher body mass index and platelet count,a higher prevalence of pre-diagnosed non-HCC cancers(P<0.001),especially breast cancer,and a lower prevalence of cirrhosis.Male gender,ARFI score,and HBV were independent predictors of HCC.The 5-year risk of HCC was 5.9%and 9.8%for those ARFI-graded with severe fibrosis and cirrhosis.ARFI alone had an area under the receiver operating characteristic curve(AUROC)of 0.742 for prediction of HCC in 5 years.AUROC increased to 0.828 after adding etiology,gender,age,and platelet score.No difference was found in mortality rate among the groups.CONCLUSION The HBV group showed a higher prevalence of HCC but lower comorbidity that made mortality similar among the groups.Those patients with ARFI-graded severe fibrosis or cirrhosis should receive regular surveillance.

Proper Understanding of the Nerve Impulses and the Action Potential

Neurologists define the transmission of nerve impulses across the membranes of the neural cells as a result of difference in the concentration of ions while they measured an electric potential, called as an action potential, which allows the propagation of such nerve impulses as electrical signals. Such measurements should guide them to a logical explanation of the nerve impulses as electric charges driven by the measured action potential. However, such logical conclusion, or explanation, is ignored due to a wrong definition of the flow of electric charges as a flow of electrons that cannot pass through neural networks. According to recent studies, electric charges are properly defined as electromagnetic (EM) waves whose energy is expressed as the product of its propagating electric potential times their entropy flow which is adhered to the flow of such energy. Such definition matches the logical conclusion of the nerve impulses as electric charges, as previously explained, and defines the entropy of the neural network, measured by Ammeters, in Watt or Joule/Volt. The measured entropy represents a neurodiagnostic property of the neural networks that measures its capacity to allow the flow of energy per unit action potential. Theoretical verification of the innovative definition of nerve impulses is presented by following an advanced entropy approach. A proper review of the machine records of the stimulating electric charges, used in the diagnosis of the neural networks, and the stimulated nerve impulses or stimulated responses, represents practical verifications of the innovative definitions of the electric charges and the nerve impulses. Comparing the functioning of the thermoelectric generators and the brain neurons, such neurons are defined as thermoelectric generators of the electric nerve impulses and their propagating, or action, potential.

Method of SLAS’s ground track manipulation based on tangential impulse thrust

Satellites with altitudes below 400 km are called super low altitude satellites(SLAS),often used to achieve responsive imaging tasks.Therefore,it is important for the manipulation of its ground track.Aiming at the problem of ground track manipulation of SLAS,a control method based on tangential impulse thrust is proposed.First,the equation of the longitude difference between SLAS and the target point on the target latitude is derived based on Gauss’s variational equations.On this basis,the influence of the tangential impulse thrust on the ground track’s longitude is derived.Finally,the method for ground track manipulation of SLAS under the tangential impulse thrust is proposed.The simulation results verify the effective-ness of the method,after manipulation,the satellite can visit the target point and revisit it for multiple days.

Analysis and Design of Time-Delay Impulsive Systems Subject to Actuator Saturation

This paper investigates the exponential stability and performance analysis of nonlinear time-delay impulsive systems subject to actuator saturation. When continuous dynamics is unstable, under some conditions, it is shown that the system can be stabilized by a class of saturated delayed-impulses regardless of the length of input delays. Conversely, when the system is originally stable, it is shown that under some conditions, the system is robust with respect to sufficient small delayed-impulses. Moreover, the design problem of the controller with the goal of obtaining a maximized estimate of the domain of attraction is formulated via a convex optimization problem. Three examples are provided to demonstrate the validity of the main results.

PCA-LSTM:An Impulsive Ground-Shaking Identification Method Based on Combined Deep Learning

Near-fault impulsive ground-shaking is highly destructive to engineering structures,so its accurate identification ground-shaking is a top priority in the engineering field.However,due to the lack of a comprehensive consideration of the ground-shaking characteristics in traditional methods,the generalization and accuracy of the identification process are low.To address these problems,an impulsive ground-shaking identification method combined with deep learning named PCA-LSTM is proposed.Firstly,ground-shaking characteristics were analyzed and groundshaking the data was annotated using Baker’smethod.Secondly,the Principal Component Analysis(PCA)method was used to extract the most relevant features related to impulsive ground-shaking.Thirdly,a Long Short-Term Memory network(LSTM)was constructed,and the extracted features were used as the input for training.Finally,the identification results for the Artificial Neural Network(ANN),Convolutional Neural Network(CNN),LSTM,and PCA-LSTMmodels were compared and analyzed.The experimental results showed that the proposed method improved the accuracy of pulsed ground-shaking identification by>8.358%and identification speed by>26.168%,compared to other benchmark models ground-shaking.

Lyapunov Conditions for Finite-Time Input-to-State Stability of Impulsive Switched Systems

Dear Editor,This letter studies finite-time input-to-state stability(FTISS)for impulsive switched systems.A set of Lyapunov-based conditions are established for guaranteeing FTISS property.When constituent modes governing continuous dynamics are FTISS and discrete dynamics involving impulses are destabilizing,the FTISS can be retained if impulsive-switching signals satisfy an average dwell-time(ADT)condition.

Modeling Near-Field Impulsive Waves Generated by Deformable Landslide Using the HBP Model Based on the SPH Method

Landslide-generated impulsive waves(LGWs)in reservoir areas can seriously threaten waterway safety as well as hu-man life and properties around the two side slopes.The risk reduction and mitigation of such a hazard require the accurate prediction of near-field wave characteristics,such as wave amplitude and run-up.However,near-field LGW involves complicated fluid-solid interactions.Furthermore,the wave characteristics are closely related to various aspects,including the geometry and physical features of the slide,river,and body of water.However,the empirical or analytical methods used for rough estimation cannot derive accurate results,especially for deformable landslides,due to their significant geometry changes during the sliding process.In this study,the near-field waves generated by deformable landslides were simulated by smoothed particle hydrodynamics(SPH)based on multi-phase flow.The deformable landslides were generalized as a kind of viscous flow by adopting the Herschel-Bulkley-Papanastasiou(HBP)-based nonNewtonian rheology model.The HBP model is capable of producing deformable landslide dynamics even though the high-speed sliding process is involved.In this study,an idealized experiment case originating from Lituya LGW and a practical case of Gongjiafang LGW were reproduced for verification and demonstration.The simulation results of both cases show satisfactory consistency with the experiment/investigation data in terms of landslide movement and near-field impulsive wave characteristics,thus indicating the applicability and accuracy of the proposed method.Finally,the effects of the HBP model’s rheological parameters on the landslide dynamics and near-field wave characteristics are discussed,providing a parameter calibration method along with sug-gestions for further applications.

Localization for mixed near-field and far-field sources under impulsive noise

In order to solve the problem that the performance of traditional localization methods for mixed near-field sources(NFSs)and far-field sources(FFSs)degrades under impulsive noise,a robust and novel localization method is proposed.After eliminating the impacts of impulsive noise by the weighted out-lier filter,the direction of arrivals(DOAs)of FFSs can be estimated by multiple signal classification(MUSIC)spectral peaks search.Based on the DOAs information of FFSs,the separation of mixed sources can be performed.Finally,the estimation of localizing parameters of NFSs can avoid two-dimension spectral peaks search by decomposing steering vectors.The Cramer-Rao bounds(CRB)for the unbiased estimations of DOA and range under impulsive noise have been drawn.Simulation experiments verify that the proposed method has advantages in probability of successful estimation(PSE)and root mean square error(RMSE)compared with existing localization methods.It can be concluded that the proposed method is effective and reliable in the environment with low generalized signal to noise ratio(GSNR),few snapshots,and strong impulse.

Numerical Study of the Vibrations of Beams with Variable Stiffness under Impulsive or Harmonic Loading

The behavior of beams with variable stiffness subjected to the action of variable loadings (impulse or harmonic) is analyzed in this paper using the successive approximation method. This successive approximation method is a technique for numerical integration of partial differential equations involving both the space and time, with well-known initial conditions on time and boundary conditions on the space. This technique, although having been applied to beams with constant stiffness, is new for the case of beams with variable stiffness, and it aims to use a quadratic parabola (in time) to approximate the solutions of the differential equations of dynamics. The spatial part is studied using the successive approximation method of the partial differential equations obtained, in order to transform them into a system of time-dependent ordinary differential equations. Thus, the integration algorithm using this technique is established and applied to examples of beams with variable stiffness, under variable loading, and with the different cases of supports chosen in the literature. We have thus calculated the cases of beams with constant or variable rigidity with articulated or embedded supports, subjected to the action of an instantaneous impulse and harmonic loads distributed over its entire length. In order to justify the robustness of the successive approximation method considered in this work, an example of an articulated beam with constant stiffness subjected to a distributed harmonic load was calculated analytically, and the results obtained compared to those found numerically for various steps (spatial h and temporal τ ¯ ) of calculus, and the difference between the values obtained by the two methods was small. For example for ( h=1/8 , τ ¯ =1/ 64 ), the difference between these values is 17%.

基于IMPULSE C的GF(P)域椭圆加密算法的硬件加速

研究了大素数域上的椭圆曲线加密算法,基于IMPULSE C语言,对该算法进行编程实现;在标准射影坐标系下,对点加和倍加算法进行并行化改进,并且在编程时利用编译器特性做了进一步的并行化。通过对加密算法合理的软硬件分割,将计算量大而且复杂的点乘运算作为硬件部分,通过现场可编程门陈列(FPGA)进行硬件加速;将加密协议的其他部分作为软件部分,在传统CPU上执行,并将硬件部分生成VHDL代码。分别进行加密算法的CoDeveloper的桌面仿真和生成的硬件VHDL代码的ISE综合仿真。最后将该加速设计在Xilinx Virtex-5 xc5vfx70tFPGA开发板上作了实现,基于FPGA的实验结果表明,P-192上点乘运算处理在133 MHz时钟下用时2.9 ms,硬件资源分配合理,与现有的手工编写的HDL代码相比,具有并行加速优势。

基于Impulse C的AES加密算法的仿真与实现

加解密算法在信息安全领域受到了越来越广泛的关注。文中介绍了一种利用Impulse C语言对AES加密算法进行编程的方法,并在软硬件协同设计平台上对应用程序进行了桌面仿真。通过对Application Monitor的调用,对进程间数据进行监控,有效提高了仿真调试的效率。最后,将应用程序转换成为Verilog代码,手工编写了测试代码,并在Modelsim中进行了RTL级仿真,得到了正确的仿真结果。文中建立了算法描述语言到硬件描述语言的翻译,对于缩短设计周期具有一定意义。

基于Impulse C的软硬件协同设计及应用

介绍了Impulse Accelerated Technologies公司推出的CoDeveloper硬件/软件协同开发工具,结合实例说明如何基于Impulse C库函数在CoDeveloper工具及Xilinx公司的EDK嵌入式开发环境下进行软硬件协同开发的新技术,为软、硬件工程师特别是软件工程师开发基于FPGA的嵌入式系统提供了新的思路。

Characteristics analysis of muzzle impulse noise based on wavelet energy spectrum

Because muzzle impulse noise could cause damage to or have an intluence on the operator, tiae ettecnve protecnve measures should be taken. Therefore, correct analysis of impulse noise characteristics is very significant. Considering the shortcomings of fast Fourier transform method （FFT） in analysis of muzzle impulse noise frequency characteristics, wavelet energy spectrum method is put forward. Based on specific experiment data, the frequency characteristics and spectral energy dis tribution can be obtained. The experiment results show that wavelet energy spectrum method is applicable in muzzle impulse noise characteristic analysis.