Multiple regression equations of liquidus temperature, electrical conductivity and bath density of the Na_3AlF_6-AlF_3-BaC1_2-NaCl system were obtained from experiments by using orthogonal regression method. The exper...Multiple regression equations of liquidus temperature, electrical conductivity and bath density of the Na_3AlF_6-AlF_3-BaC1_2-NaCl system were obtained from experiments by using orthogonal regression method. The experiments were carried out in 100A cell with low melting point electrolyte, the influences of cathodic current density, electrolytic temperature, density differences of bath and liquid aluminum on current efficiency (CE) were studied; when the electrolyte cryolite ratio was 2.5, w(BaC1_2) and w(NaCl) were 48% and 10%, respectively, CE reached 90% and specific energy consumption was 10.97k Wb/kg/kg. Because of the fact that aluminum metal obtained floated on the surface of molten electrolyte, this electrolysis method was then defined as low temperature aluminum floating electrolysis. The results showed that the new low temperature aluminum electrolysis process in the Na_3AlF_6-AlF_3-BaC1_2-NaCl bath system was practical and promising.展开更多
A self-developed electromagnetic induction-heating device was used to investigate the variation in the microstructure and properties of X80 pipeline steel in the rapid induction tempering process at different process ...A self-developed electromagnetic induction-heating device was used to investigate the variation in the microstructure and properties of X80 pipeline steel in the rapid induction tempering process at different process parameters. The effects of the tempering condition on toughness, microstructure, size and distribution of precipitates of X80 pipeline steel were observed using a metallographic microscopy and scanning electron microscopy. Compared with the samples prepared via traditional tempering techniques, results show that the samples prepared via rapid induction tempering had improved performances. When the heating temperature is 590 ℃, at a holding time of 90 s,it was found that acicular ferrite was refined, carbonite precipitation was small, and precipitates were evenly distributed in the matrix. The low-temperature impact energy, also known as the impact absorption energy, at -40 ℃ was found to be 430.5 J for the rapid induction tempering samples and 323.2 J for the traditionally tempered sample. The low-temperature impact energy at -60 ℃ was found to be 351.3 J for the rapid induction tempered sample and 312.1 J for the tradition tempering sample.展开更多
Room temperature sputtered inorganic nickel oxide(NiO_(x))is one of the most promising hole transport layers(HTL)for perovskite-sillion 2-terminal tandem solar cells with the aid of ultrathin and compact organic layer...Room temperature sputtered inorganic nickel oxide(NiO_(x))is one of the most promising hole transport layers(HTL)for perovskite-sillion 2-terminal tandem solar cells with the aid of ultrathin and compact organic layers to passivate the surface defects.In this study,the aromatic solvent with different substituent groups was used to regulate the conformation of poly[bis(4-phenyl)(2,4,6-trimethylphenyl)am ine](PTAA)layer.As a result,the single-junction perovskite solar cell(PSC)gained a power conversion efficiency(PCE)of 20.63%,contributing to a 27.21%efficiency for monolithic perovskite/silicon(double-side polished)2-terminal tandem solar cell,by applying the alkyl aromatic solvent to enhance theπ-πstacking of PTAA molecular chains.The tandem solar cell can maintain 95%initial efficiency after aging over 1000 h.This study provides a universal approach for improving the photovoltaic performance of NiO_(x)/polymer-based perovskite/silicon tandem solar cells and other single junction inverted PSCs.展开更多
基金The project was financially supported by the National Natural Science Foundation of China! (Gmnt No.59574018)China Postdocto
文摘Multiple regression equations of liquidus temperature, electrical conductivity and bath density of the Na_3AlF_6-AlF_3-BaC1_2-NaCl system were obtained from experiments by using orthogonal regression method. The experiments were carried out in 100A cell with low melting point electrolyte, the influences of cathodic current density, electrolytic temperature, density differences of bath and liquid aluminum on current efficiency (CE) were studied; when the electrolyte cryolite ratio was 2.5, w(BaC1_2) and w(NaCl) were 48% and 10%, respectively, CE reached 90% and specific energy consumption was 10.97k Wb/kg/kg. Because of the fact that aluminum metal obtained floated on the surface of molten electrolyte, this electrolysis method was then defined as low temperature aluminum floating electrolysis. The results showed that the new low temperature aluminum electrolysis process in the Na_3AlF_6-AlF_3-BaC1_2-NaCl bath system was practical and promising.
文摘A self-developed electromagnetic induction-heating device was used to investigate the variation in the microstructure and properties of X80 pipeline steel in the rapid induction tempering process at different process parameters. The effects of the tempering condition on toughness, microstructure, size and distribution of precipitates of X80 pipeline steel were observed using a metallographic microscopy and scanning electron microscopy. Compared with the samples prepared via traditional tempering techniques, results show that the samples prepared via rapid induction tempering had improved performances. When the heating temperature is 590 ℃, at a holding time of 90 s,it was found that acicular ferrite was refined, carbonite precipitation was small, and precipitates were evenly distributed in the matrix. The low-temperature impact energy, also known as the impact absorption energy, at -40 ℃ was found to be 430.5 J for the rapid induction tempering samples and 323.2 J for the traditionally tempered sample. The low-temperature impact energy at -60 ℃ was found to be 351.3 J for the rapid induction tempered sample and 312.1 J for the tradition tempering sample.
基金supported by the National Key R&D Program of China(2018YFB1500103)the National Natural Science Foundation of China(62104082)+1 种基金the Guangdong Basic and Applied Basic Research Foundation(2022A1515010746,2022A1515011228)the Science and Technology Program of Guangzhou(202201010458)。
文摘Room temperature sputtered inorganic nickel oxide(NiO_(x))is one of the most promising hole transport layers(HTL)for perovskite-sillion 2-terminal tandem solar cells with the aid of ultrathin and compact organic layers to passivate the surface defects.In this study,the aromatic solvent with different substituent groups was used to regulate the conformation of poly[bis(4-phenyl)(2,4,6-trimethylphenyl)am ine](PTAA)layer.As a result,the single-junction perovskite solar cell(PSC)gained a power conversion efficiency(PCE)of 20.63%,contributing to a 27.21%efficiency for monolithic perovskite/silicon(double-side polished)2-terminal tandem solar cell,by applying the alkyl aromatic solvent to enhance theπ-πstacking of PTAA molecular chains.The tandem solar cell can maintain 95%initial efficiency after aging over 1000 h.This study provides a universal approach for improving the photovoltaic performance of NiO_(x)/polymer-based perovskite/silicon tandem solar cells and other single junction inverted PSCs.
