Tests of nine angle-steel concrete column （ASCC） specimens under low cyclic loading are described in a companion paper （Zheng and Ji, 2008）. In this paper, the skeleton curves from the numerical simulation are pre...Tests of nine angle-steel concrete column （ASCC） specimens under low cyclic loading are described in a companion paper （Zheng and Ji, 2008）. In this paper, the skeleton curves from the numerical simulation are presented, and show good agreement with the test results. Furthermore, parametric studies are conducted to explore the influence of factors such as the axial compression ratio, shear steel plate ratio, steel ratio, prismatic concrete compression strength, yield strength of angle steel and shear span ratio, etc., on the monotonic load-displacement curves of the ASCCs. Based on a statistical analysis of the calculated results, hysteretic models for load-displacement and moment-curvature are proposed, which agree well with the test results. Finally, some suggestions concerning the conformation of ASCCs are proposed, which could be useful in engineering practice.展开更多
In this study, the undrained behaviour of silt under low stress level is studied. An effective preparation method for built-in silt samples in the triaxial test was firstly developed. By triaxial testing of samples at...In this study, the undrained behaviour of silt under low stress level is studied. An effective preparation method for built-in silt samples in the triaxial test was firstly developed. By triaxial testing of samples at low confining pressures it was found that silt easily loses stability and liquefies. Loose silt may show temporary liquefaction under static loading, and develop full liquefaction under cyclic loading. The most important factors influencing the silt behaviour are porosity, confining pressure, consolidation state, cyclic loading level and number of cycles. The maximum obtainable shear stress is primarily a function of the confining pressure and the internal frictional angle. The actual structure of the silt material is the key factor in controlling its behaviour.展开更多
基金the New Century Excellent Talents in University Under Grant No.290Heilongjiang Key Program on Science and Technology Under Grant No. GC04A609arbin Key Program on Science and Technology Under Grant No. 2004AA9CS187.
文摘Tests of nine angle-steel concrete column （ASCC） specimens under low cyclic loading are described in a companion paper （Zheng and Ji, 2008）. In this paper, the skeleton curves from the numerical simulation are presented, and show good agreement with the test results. Furthermore, parametric studies are conducted to explore the influence of factors such as the axial compression ratio, shear steel plate ratio, steel ratio, prismatic concrete compression strength, yield strength of angle steel and shear span ratio, etc., on the monotonic load-displacement curves of the ASCCs. Based on a statistical analysis of the calculated results, hysteretic models for load-displacement and moment-curvature are proposed, which agree well with the test results. Finally, some suggestions concerning the conformation of ASCCs are proposed, which could be useful in engineering practice.
基金This research is partly supported by the National Natural Science Foundation(No.50009002)863(No.2001AA616020)projects.
文摘In this study, the undrained behaviour of silt under low stress level is studied. An effective preparation method for built-in silt samples in the triaxial test was firstly developed. By triaxial testing of samples at low confining pressures it was found that silt easily loses stability and liquefies. Loose silt may show temporary liquefaction under static loading, and develop full liquefaction under cyclic loading. The most important factors influencing the silt behaviour are porosity, confining pressure, consolidation state, cyclic loading level and number of cycles. The maximum obtainable shear stress is primarily a function of the confining pressure and the internal frictional angle. The actual structure of the silt material is the key factor in controlling its behaviour.
文摘为了研究使用矩形钢管连接的新型全预制冷弯薄壁型钢复合墙体的抗侧性能,设计了6个足尺试件,并进行了水平低周往复加载试验,分析了龙骨间距、覆面板类型、单面或双面覆板等因素对新型复合墙体试件抗侧性能的影响.新型墙体的覆面板为OSB板与硅晶钙板.试验结果表明:使用矩形钢管连接的新型复合墙体具有良好的整体抗震性能;单面或双面覆板对墙体抗侧性能影响显著,双面覆板的新型复合墙体的屈服荷载约为单面覆板新型复合墙体的2倍;龙骨间距和覆面板材料对墙体抗侧性能的影响相对较小.在试验基础上,使用OpenSEES软件建立了试验墙体的有限元分析模型,并针对矩形钢管壁厚、周边螺钉间距取值进行了参数分析.参数分析结果表明,矩形钢管连接件壁厚取值推荐为2.5 mm,周边螺钉间距推荐取50~100 mm.
