Fluorine in mold powder is known as harmful to human health and the environment. Being the advocate of green production, Baosteel developed an environmentally friendly mold powder without fluorine. The main problem of...Fluorine in mold powder is known as harmful to human health and the environment. Being the advocate of green production, Baosteel developed an environmentally friendly mold powder without fluorine. The main problem of fluorine-free flux film is small heat resistance and thus the heat transfer intensity of the mold is too large, which to some extent hinders the increase of the casting speed. With the heat flow simulation equipment, controlling precipitation of crystal in flux and solidification temperature properly, fluorine-free mold powder for low carbon steel,which substitutes F with B203 ,was successfully developed and applied in industrial production. The production results show that, by using boronic fluorine-free mold powder,the boron increment in molten steel is less than 1.3ppm for conventional aluminium killed low carbon steel.展开更多
Differences in free fatty acid (FFA) compositions between low-fat (LF) and full-fat (FF: whole milk) goat cheeses were evaluated during 3 months at 4oC refrigeration. The two types of cheeses were manufactured using a...Differences in free fatty acid (FFA) compositions between low-fat (LF) and full-fat (FF: whole milk) goat cheeses were evaluated during 3 months at 4oC refrigeration. The two types of cheeses were manufactured using a bulk milk from the mixed herd of Saanen, Alpine, and Nubian goat breeds. LF cheeses were made using LF milk after cream separation. FFAs of all cheeses were extracted in diisoprophyl ether using polypropylene chromatography column, and FFA concentrations were quantified using a gas chromatograph equipped with a fused silica capillary column. Moisture, fat, protein contents (%) and pH of fresh LF and FF cheeses were: 55.1, 52.3;1.30, 25.6;35.7, 22.5;5.40, 5.42, respectively. The FFA contents (mg/g cheese) of fresh FF and LF cheeses prior to storage treatments for C4:0, C6:0, C8:0, C10:0, C12:0, C14:0, C16:0, C18:0, C18:1, and C18:2 were: 0.020, 0.072;0.070, 0.035;0.061, 0.055;0.181, 0.167;0.073, 0.047;0.174, 0.112;0.579, 0.152;0.308, 0.202;0.521, 0.174;and 0.057, 0.026, respectively. The respective FFA to total fatty acid ratios for 0, 1 and 3 months aged FF and LF cheeses were 8.44, 12.4;6.31, 16.91;12.03, 14.19. The LF cheeses generated more FFA than FF cheeses, while actual FFA content in FF cheese was significantly higher than in LF cheese. The FFA contents of LF cheese at 0, 1 and 3 months storage were 48.0, 96.8 and 36.4% of those of FF cheese, respectively. It was concluded LF cheese generated higher amount of FFA than FF cheese, although total FFA content was significantly (P<0.05) lower in LF cheese than in FF cheese.展开更多
文摘Fluorine in mold powder is known as harmful to human health and the environment. Being the advocate of green production, Baosteel developed an environmentally friendly mold powder without fluorine. The main problem of fluorine-free flux film is small heat resistance and thus the heat transfer intensity of the mold is too large, which to some extent hinders the increase of the casting speed. With the heat flow simulation equipment, controlling precipitation of crystal in flux and solidification temperature properly, fluorine-free mold powder for low carbon steel,which substitutes F with B203 ,was successfully developed and applied in industrial production. The production results show that, by using boronic fluorine-free mold powder,the boron increment in molten steel is less than 1.3ppm for conventional aluminium killed low carbon steel.
文摘Differences in free fatty acid (FFA) compositions between low-fat (LF) and full-fat (FF: whole milk) goat cheeses were evaluated during 3 months at 4oC refrigeration. The two types of cheeses were manufactured using a bulk milk from the mixed herd of Saanen, Alpine, and Nubian goat breeds. LF cheeses were made using LF milk after cream separation. FFAs of all cheeses were extracted in diisoprophyl ether using polypropylene chromatography column, and FFA concentrations were quantified using a gas chromatograph equipped with a fused silica capillary column. Moisture, fat, protein contents (%) and pH of fresh LF and FF cheeses were: 55.1, 52.3;1.30, 25.6;35.7, 22.5;5.40, 5.42, respectively. The FFA contents (mg/g cheese) of fresh FF and LF cheeses prior to storage treatments for C4:0, C6:0, C8:0, C10:0, C12:0, C14:0, C16:0, C18:0, C18:1, and C18:2 were: 0.020, 0.072;0.070, 0.035;0.061, 0.055;0.181, 0.167;0.073, 0.047;0.174, 0.112;0.579, 0.152;0.308, 0.202;0.521, 0.174;and 0.057, 0.026, respectively. The respective FFA to total fatty acid ratios for 0, 1 and 3 months aged FF and LF cheeses were 8.44, 12.4;6.31, 16.91;12.03, 14.19. The LF cheeses generated more FFA than FF cheeses, while actual FFA content in FF cheese was significantly higher than in LF cheese. The FFA contents of LF cheese at 0, 1 and 3 months storage were 48.0, 96.8 and 36.4% of those of FF cheese, respectively. It was concluded LF cheese generated higher amount of FFA than FF cheese, although total FFA content was significantly (P<0.05) lower in LF cheese than in FF cheese.
