Two kinds of Mn-Si-Mo low carbon steels were designed to study the effects of Mn on the microstructures and properties of hot rolled low carbon bainitic steels.To reduce the production cost,a very low Mo content of 0....Two kinds of Mn-Si-Mo low carbon steels were designed to study the effects of Mn on the microstructures and properties of hot rolled low carbon bainitic steels.To reduce the production cost,a very low Mo content of 0.13%was added in both steels.After hot rolling,the mechanical properties of samples were tested.Microstructure was observed and analyzed by optical microscope and transmission electron microscope.The results show that the strength of tested steels increases with the increase in Mn content,while the elongation decreases.When Mn content increases,the bainite microstructure increases.The results can provide a theoretical basis for composition design and industrial production of low cost low carbon bainitic steels.展开更多
Al2O3 porous nanosolid was prepared via solvothermal hot-press（SHP） method.The dielectric constant of Al2O3 porous nanosolid is as low as 2.34,while its compressive strength is very poor.In order to improve the comp...Al2O3 porous nanosolid was prepared via solvothermal hot-press（SHP） method.The dielectric constant of Al2O3 porous nanosolid is as low as 2.34,while its compressive strength is very poor.In order to improve the compressive strength and maitain low dielectric constant,polyimide was introduced to prepare Al2O3 /polyimide composite porous nanosolid.Compared to Al2O3 porous nanosolid,Al2O3 /polyimide composite porous nanosolid possesses much higher compressive strength,which reaches its saturation value when the mass loading of polyimide is 7.75%.In addition,the in situ Fourier transformation infrared（FTIR） monitoring result reveals that Al2O3 /polyimide composite porous nanosolid is stable up to 400 °C.展开更多
The hot deformation characteristics and the corrosion behavior of a high-strength low-alloy(HSLA) steel were investigated at deformation temperatures ranging from 800 to 1100 ℃ and strain rates ranging from 0.1 to 10...The hot deformation characteristics and the corrosion behavior of a high-strength low-alloy(HSLA) steel were investigated at deformation temperatures ranging from 800 to 1100 ℃ and strain rates ranging from 0.1 to 10 s-1 using an MMS-200 thermal simulation testing machine. Based on the flow curves from the experiment, the effects of temperature and strain rate on the dynamic recrystallization behavior were analyzed. The flow stress decreased with increasing deformation temperature and decreasing strain rate. With the assistance of the process parameters, constitutive equations were used to obtain the activation energy and hot working equation. The hot deformation activation energy of HSLA steel in this work was 351.87 kJ/mol. The work hardening rate was used to determine the critical stress(strain) or the peak stress(strain). The dependence of these characteristic values on the Zener-Hollomon parameter was found. A dynamic recrystallization kinetics model of the tested HSLA steel was constructed, and the validity of the model was confirmed by the experimental results. Observation of the microstructures indicated that the grain size increased with increasing deformation temperature,which led to a lowered corrosion resistance of the specimens.展开更多
基金Funded by the National Natural Science Foundation of China(NSFC)(No.51274154)
文摘Two kinds of Mn-Si-Mo low carbon steels were designed to study the effects of Mn on the microstructures and properties of hot rolled low carbon bainitic steels.To reduce the production cost,a very low Mo content of 0.13%was added in both steels.After hot rolling,the mechanical properties of samples were tested.Microstructure was observed and analyzed by optical microscope and transmission electron microscope.The results show that the strength of tested steels increases with the increase in Mn content,while the elongation decreases.When Mn content increases,the bainite microstructure increases.The results can provide a theoretical basis for composition design and industrial production of low cost low carbon bainitic steels.
基金Supported by the National Natural Science Foundation of China(Nos.50990061,51021062,21073107 and 51102151)the Postdoctoral Science Foundation of China(No.20100481245)+1 种基金the Natural Science Foundation(No.ZR2011EMQ002)the Postdoctoral Innovation Foundation(No.201003077) of shandong Province, China
文摘Al2O3 porous nanosolid was prepared via solvothermal hot-press（SHP） method.The dielectric constant of Al2O3 porous nanosolid is as low as 2.34,while its compressive strength is very poor.In order to improve the compressive strength and maitain low dielectric constant,polyimide was introduced to prepare Al2O3 /polyimide composite porous nanosolid.Compared to Al2O3 porous nanosolid,Al2O3 /polyimide composite porous nanosolid possesses much higher compressive strength,which reaches its saturation value when the mass loading of polyimide is 7.75%.In addition,the in situ Fourier transformation infrared（FTIR） monitoring result reveals that Al2O3 /polyimide composite porous nanosolid is stable up to 400 °C.
基金supported financially by the Fundamental Research Funds for the Central Universities (Nos. HEUCFP201719 and HEUCFP201731)
文摘The hot deformation characteristics and the corrosion behavior of a high-strength low-alloy(HSLA) steel were investigated at deformation temperatures ranging from 800 to 1100 ℃ and strain rates ranging from 0.1 to 10 s-1 using an MMS-200 thermal simulation testing machine. Based on the flow curves from the experiment, the effects of temperature and strain rate on the dynamic recrystallization behavior were analyzed. The flow stress decreased with increasing deformation temperature and decreasing strain rate. With the assistance of the process parameters, constitutive equations were used to obtain the activation energy and hot working equation. The hot deformation activation energy of HSLA steel in this work was 351.87 kJ/mol. The work hardening rate was used to determine the critical stress(strain) or the peak stress(strain). The dependence of these characteristic values on the Zener-Hollomon parameter was found. A dynamic recrystallization kinetics model of the tested HSLA steel was constructed, and the validity of the model was confirmed by the experimental results. Observation of the microstructures indicated that the grain size increased with increasing deformation temperature,which led to a lowered corrosion resistance of the specimens.
