Intelligent production optimization method for a low pressure and low productivity shale gas well

Shale gas wells frequently suffer from liquid loading and insufficient formation pressure in the late stage of production.To address this issue,an intelligent production optimization method for low pressure and low productivity shale gas well is proposed.Based on the artificial intelligence algorithms,this method realizes automatic production and monitoring of gas well.The method can forecast the production performance of a single well by using the long short-term memory neural network and then guide gas well production accordingly,to fulfill liquid loading warning and automatic intermittent production.Combined with adjustable nozzle,the method can keep production and pressure of gas wells stable automatically,extend normal production time of shale gas wells,enhance automatic level of well sites,and reach the goal of refined production management by making production regime for each well.Field tests show that wells with production regime optimized by this method increased 15%in estimated ultimate reserve(EUR).Compared with the development mode of drainage after depletion recovery,this method is more economical and can increase and stabilize production effectively,so it has a bright application prospect.

Drift characteristics and the multi-field coupling stress mechanism of the pantograph-catenary arc under low air pressure

The fault caused by a pantograph-catenary arc is the main factor that threatens the stability of high-speed railway energy transmission.Pantograph-catenary arc vertical drift is more severe than the case under normal pressure,as it is easy to develop the rigid busbar,which may lead to the flashover occurring around the support insulators.We establish a pantograph-catenary arc experiment and diagnosis platform to simulate low pressure and strong airflow environment.Meanwhile,the variation law of arc drift height with time under different air pressures and airflow velocities is analyzed.Moreover,arc drift characteristics and influencing factors are explored.The physical process of the arc column drifting to the rigid busbar with the jumping mechanism of the arc root on the rigid busbar is summarized.In order to further explore the mechanism of the above physical process,a multi-field stress coupling model is built,as the multi-stress variation law of arc is quantitatively evaluated.The dynamic action mechanism of multi-field stress on arc drifting characteristics is explored,as the physical mechanism of arc drifting under low pressure is theoretically explained.The research results provide theoretical support for arc suppression in high-altitude areas.

Hydraulic role in differential stomatal behaviors at two contrasting elevations in three dominant tree species of a mixed coniferous and broad-leaved forest in low subtropical China

Quantifying the variation in stomatal behavior and functional traits of trees with elevation can provide a better understanding of the adaptative strategies to a changing climate. In this study, six water-and carbon-related functional traits were examined for three dominant tree species, Schima superba, Pinus massoniana and Castanopsis chinensis, in a mixed coniferous and broad-leaved forest at two elevations(70 and 360 m above sea level,respectively) in low subtropical China. We hypothesized that trees at higher elevations would develop more efficient strategies of stomatal regulations and greater water transport capacity to cope with more variable hydrothermal conditions than those at lower elevations. Results show that the hydraulic conductivity did not differ between trees at the two elevations, contrary to our expectation. The C. chinensis trees had greater values of leaf mass per unit area(LMA), and the S. superba and C. chinensis trees had greater values of wood density(WD),relative stem water content(RWC), and ratio of sapwood area to leaf area(Hv) at the 360-m elevation than at 70-m elevation. The mean canopy stomatal conductance was greater and more sensitive to vapor deficit pressure at360 m than at 70 m for both S. superba and C. chinensis, while stomatal sensitivity did not differ between the two contrasting elevations for P. massoniana. The midday leaf water potential(ψL) in P. massoniana was significantly more negative at 360 m than at 70 m, but did not vary with increasing elevation in both S. superba and C. chinensis.Variations in Hvcan be related to the differential stomatal behaviors between the two elevations. The variations of stomatal behavior and ψLwith elevation suggested the isohydric strategy for the two broad-leaved species and the anisohydric strategy for the conifer species. The species-specific differences in LMA, WD, RWC, and Hvbetween the two elevations may reflect conservative resource use strategies at the higher elevation. Our findings revealed a close relationship between hydraulic and stomatal behavior and may help better understand the functional responses of forests to changing environmental conditions.

Oxidation of Fe-Cr-Ni Alloys in a Low Oxygen Partial Pressure Atmosphere to Mitigate Coke Formation

Anti-coking oxide films were prepared on a 25Cr35Ni and 35Cr45Ni alloy surface under the low oxygen partialpressure atmosphere of a H2-H2O mixture. The composition and phase structure of the oxide films were analyzed by energydispersive spectroscopy (EDS), X-ray diffraction (XRD), and X-ray photoelectron spectroscopy (XPS). The anti-cokingperformance of a mini tube made of a HP40 (25Cr35Ni) alloy was evaluated on a bench scale pyrolysis and coking test unit.The results showed that the surface Fe and Ni content decreased after the oxidation of the two alloys in a low oxygen partialpressure atmosphere. The oxide films were mainly composed of MnCr_(2)O_(4) and Cr_(2)O_(3). The average mass of coke in the minitube with oxide film decreased by 87% relative to that of a tube without an oxide film when the cracking temperature was 900℃. The ethylene, propylene, and butadiene yields in the pyrolysis tests were almost the same for the mini tubes withand without an oxide film. The oxide film on the alloy surface effectively inhibited catalytic filamentous coke formation.An industrial test showed that the run length of the cracking furnace with the in-situ coating technology was significantlyextended.

Controlled low central venous pressure reduces blood loss and transfusion requirements in hepatectomy

AIM:To evaluate the effect of low central venous pressure(LCVP)on blood loss and blood transfusion in patients undergoing hepatectomy.METHODS:Electronic databases and bibliography lists were searched for potential articles.A meta-analysis of all randomized controlled trials(RCTs)investigating LCVP in hepatectomy was performed.The following three outcomes were analyzed:blood loss,blood transfusion and duration of operation.RESULTS:Five RCTs including 283 patients were assessed.Meta-analysis showed that blood loss in the LCVP group was significantly less than that in the control group(MD=-391.95,95%CI:-559.35--224.56,P<0.00001).In addition,blood transfusion in the LCVP group was also significantly less than that in the control group(MD=-246.87,95%CI:-427.06--66.69,P=0.007).The duration of operation in the LCVP group was significantly shorter than that in the control group(MD=-18.89,95%CI:-35.18--2.59,P=0.02).Most studies found no significant difference in renal and liver function between the two groups.CONCLUSION:Controlled LCVP is a simple and effective technique to reduce blood loss and blood transfusion during liver resection,and appears to have no detrimental effects on liver and renal function.

Labetalol versus Hydralazine in the Management of Severe Pre-Eclampsia at Tertiary Hospitals in a Low-Resource Setting: A Randomised Controlled Trial

Objective: Intravenous labetalol and hydralazine are both considered first-line medications for the management of acute-onset, severe hypertension in pregnant and postpartum women. The study compared the efficacy and safety profile of intravenous labetalol and hydralazine in the control hypertension in severe pre-eclampsia. Materials and Methods: One hundred patients who presented with severe pre-eclampsia were randomized into two study groups. The fifty patients in each arm of the study received either intravenous labetalol or intravenous hydralazine for the control of blood pressure. Results: The mean age of the labetalol subjects was 28.6 ± 5.47 years while that of their hydralazine counterparts was 29.12 ± 5.77 years. The majority of respondents in both groups were primigravidae (76% vs. 78%) (P = 0.813). The number of doses of drug needed to significantly lower the mean systolic blood pressure was slightly lower in the labetalol group (2 doses) compared to the hydralazine group (5 doses) (t = 0.803Y, P = 0.977). The incidence of headaches which were the commonest complaints was comparable in both groups 8% and 10% of respondents respectively (P > 0.05). Conclusion: Although both intravenous labetalol and hydralazine are useful in patients with severe pre-eclampsia, the response to labetalol was better with comparable side effects.

Effects of Low Protein Diets Supplemented with Ami-no Acids on Production Performance,Carcass Qual-ity and Input-output Ratio of Pigs

[ Objectives ] To study the effects of low-protein diets supplemented with amino acids on the production performance, carcass quality and input-output ratio of fattening pigs and growing-finishing pigs. [ Methods] Two studies were conducted on fattening pigs and growing pigs respectively. Pigs in two experimental groupswere fed with low-protein diets supplemented with amino acids and normal diets respectively, and the initial weight, final weight, feed consumption and car- cass index of the tested pigs were measured. [ Results] The average final weight of fattening pigs in test group was 2.4 kg lower than that in control group, while the difference was not significant （P 〉 0.05 ）. The average daily gain of fattening pigs in test group was 60 g lower than that in control group, indicating that low protein diets had a tendency to decrease the growth rate （P 〉 0.05 ）, and reduction of daily weight gain in low protein diet pigs reached 7.6%. The development of pigs in low protein diet group was poor, however, the difference was not significant. Carcass backfat thickness in low-protein diet group was slightly higher than that in control group, the difference was significant （ P 〈 0.05 ）. There was no significant difference in input-output ratio between low-protein diet group and control group. Finalweight of growing-finishing pigs in low-protein diet group was 3.22 % lower than that in control group, the average daily weight gainwas 6.91% lower than that in control group, feed intake in test group was 5.48% lower than that in control group, and difference between the two treatments was significant （P 〈 0.05 ）. Feed meat ratio in low-protein diet group improved, however, the difference was not significant（P 〉0.05）. [ Conclusions] Production performance of the pigs would be decreasedand the input-output ratio could not be improvedwhen the adding contents of crude protein in diets was reduced 3% -4%. Therefore, it is recommended that the crude protein level should be enough when pigs were fed with low-protein diets.

THE PRODUCTION OF FOAM ALUMINIUM ALLOY BY LOW-PRESSURE INFILTRATION METHOD

The influence of technical parameters on the infiltrating height of the moltenmetal in the process of Producing aluminium alloy foam by low-pressure infiltration method were investigated.Experiments indicated that the height increases with the preheating temperature of granules,theexternal pressureand the pouring temperature of molten alloy,among which the action of pre heating temperature of granules is more effective.There exists a critical pre heating temperature for different size of granules.

A two-dimensional air streamer discharge modified model based on artificial stability term under non-uniform electric field at low temperature and sub-atmospheric pressure

In this paper, an improved air discharge fluid model under non-uniform electric field is constructed based on the plasma module COMSOL Multiphysics with artificial stability term, and the boundary conditions developed in the previous paper are applied to the calculation of photoionization rate. Based on the modified model, the characteristics of low temperature subatmospheric air discharge under 13 kV direct current voltage are discussed, including needle-plate and needle-needle electrode structures. Firstly, in order to verify the reliability of the model, a numerical example and an experimental verification were carried out for the modified model respectively. Both verification results show that the model can ensure the accuracy and repeatability of the calculation. Secondly, according to the calculation results of the modified model, under the same voltage and spacing, the reduced electric field under low temperature subatmosphere pressure is larger than that under normal temperature and atmospheric pressure. The high electric field leads to the air discharge at low temperature and sub atmospheric pressure entering the streamer initiation stage earlier, and has a faster propagation speed in the streamer development stage, which shortens the overall discharge time. Finally, the discharge characteristics of the two electrode structures are compared, and it is found that the biggest difference between them is that there is a pre-ionization region near the cathode in the needle-needle electrode structure. When the pre-ionization level reaches 1013 cm-3, the propagation speed of the positive streamer remains unchanged throughout the discharge process, and is no longer affected by the negative streamer. The peak value of electric field decreases with the increase of pre-ionization level, and tends to be constant during streamer propagation. Based on the previous paper, this paper constructs the air discharge model under non-uniform electric field, complements with the previous paper, and forms a relatively complete set of air discharge simulation system under low temperature and sub atmospheric pressure, which provides a certain reference for future research.

A two-dimensional air streamer discharge model based on the improved Helmholtz equation at low temperature and sub-atmospheric pressure

In this paper,an efficient boundary condition is applied to solve the photoionization rate,and a two-dimensional numerical simulation is carried out for the development and propagation of an air streamer at low temperature and sub-atmospheric pressure.The results show that the new boundary condition improves the calculation accuracy,but the influence of photoionization on the streamer discharge process is not obvious.The discharge current in the development of streamer discharge is defined,and the corresponding expression of the positive and negative streamer discharge current is given.The influence of the electric field exceeding the threshold value on the discharge process is preliminarily introduced.In the process of discharge,only the propagation velocity of the streamer is obviously higher than that of normal temperature and pressure,and the trend of the other parameters is basically the same as that described in the previous paper.The above results give us a deeper understanding of the discharge characteristics under low temperature and sub-atmospheric pressure,which has certain significance for the development of aviation and high voltage engineering.

Study on Reducing Injection Pressure of Low Permeability Reservoirs Characterized by High Temperature and High Salinity

In view of the problems of high injection pressure and low water injection rate in water injection wells of low permeability reservoirs featuring high temperature and high salinity,two new surfactants were synthesized,including a quaternary ammonium surfactant and a betaine amphoteric surfactant.The composite surfactant system BYJ-1 was formed by mixing two kinds of surfactants.The minimum interfacial tension between BYJ-1 solution and the crude oil could reach 1.4×10^(-3) mN/m.The temperature resistance was up to 140℃,and the salt resistance could reach up to 120 g/L.For the low permeability core fully saturated with water phase,BYJ-1 could obviously reduce the starting pressure gradient of low permeability core.While for the core with residual oil,BYJ-1 could obviously reduce the injection pressure and improve the oil recovery.Moreover,the field test showed that BYJ-1 could effectively reduce the injection pressure of the water injection well,increase the injection volume,and increase the liquid production and oil production of the corresponding production well.

Effect of High Pressure Heat Treatment on Microstructure and Compressive Properties of Low Carbon Steel

The effect of high pressure heat treatment on microstructure and compressive properties of low carbon steel were investigated by optical microscope,transmission electron microscope,hardness tester and compression test methods.The results show that martensite appears in low carbon steel at 1-5GPa GPa and 950°C for 15 minutes treatment,high pressure heat treatment can improve the hardness and compressive properties of the steel,the yield strength of the steel increases with increasing pressure,and its compressive properties are better than that treated under normal pressure quenching.

Physical simulation of fluid flow and production performance in extra-low permeability porous media

For extra-low permeability reservoirs, with a permeability of about 0.3×10?3 μm2, fluid flow and production performance in cores were studied. A long core holder with a multi-location piezometric measurement was specially designed. An artificial long core, about 700 mm long and with a cross section of 45mm×45mm, was used. In the experiment, pressure distribution along the core can be measured in real time. Single phase flow in the core was investigated. Different modes of production in long cores were also simulated including natural depletion, water flooding, and advanced water flooding. Through physical simulation, flow parameters were collected and production characteristics in extra-low permeability cores were studied. From experimental results, it can be seen that fluid flow in extra-low permeability cores is different from that in high permeability cores. Transmission of pressure in extra-low permeability cores is very slow, and it needs a long time for the pressure to become stable. The distribution curve of pressure along the core is nonlinear and the production rate in extra-low permeability reservoirs decreases sharply. The development effects of different production modes in extra-low permeability cores were compared with one another. Among the production modes, advanced water flooding has much potential for effective development of extra-low permeability reservoirs. Natural depletion and conventional water flooding can also be used in early production periods. In addition, the countermeasures and some ideas especially for the potential development of extra-low permeability reservoirs are suggested.

Production of the Blood Pressure Lowing Peptides from Brown Alga(Undaria pinnatifida)

Brown alga (Undaria pinnatifida) was treated with alginate lyase and hydrolyzed using 17 kinds of proteases andthe inhibitory activity of the hydrolysates for the angiotensin-I-converting enzyme (ACE) was measured. Four hydrolysateswith potent ACE-inhibitory activity were administered singly and orally to spontaneously hypertensive rats (SHRs). The sys-tolic blood pressure of SHRs decreases significantly after single oral administration of the brown alga hydrolysates by pro-tease S ’Amano’ (from Bacillus stearothermophilus) at the concentration of 10 (mg protein) (kg body weight)-1. In the 17weeks of feeding experiment, 7-week-old SHRs were fed standard diet supplemented with the brown alga hydrolysates for 10weeks. In SHRs fed 1.0 and 0.1% brown alga hydrolysates, elevating of systolic bloodpressure was significantly suppressedfor 7 weeks. To elucidate the active components, the brown alga hydrolysates were fractionated by 1-butanol extraction andHPLC on a reverse-phase column. Seven kinds of ACE-inhibitory peptides were isolated and identified by amino acid compo-sition analysis, sequence analysis, and LC-MS with the results Val-Tyr, Ile-Tyr, Ala-Trp, Phe-Tyr, Val-Trp, Ile-Trp, andLeu-Trp. Each peptide was determined to have an antihypertensive effect after a single oral administration in SHRs. Thebrown alga hydrolysates were also confirmed to decrease the blood pressure in humans.

Development and Commercial Application of Ultra-Low Pressure Naphtha Reforming Technology with Continuous Catalyst Regeneration

The development history and major technological innovations of the ultra-low pressure naphtha reforming technology with continuous catalyst regeneration in China were introduced.This technology had been adopted by the 1.0 Mt/a CCR unit at the Guangzhou Company.The appropriate catalyst was selected to meet the demand of the unit capacity,the feedstock,and the product slate.The design parameters,including the reaction pressure,the octane number of C5+liquid product,the reaction temperature,the space velocity,the hydrogen/oil molar ratio,and the catalyst circulating rate,were chosen based on the study of process conditions and parameters.The commercial test results showed that the research octane number of C5+product reached 104 when the capacity of the CCR unit was 100%and 115%of the design value.The other technical targets attained or exceeded the expected value.

Principles and practice of low pressure-expendable pattern casting process for magnesium alloys

A newly developed low-pressure expendable pattern casting (LP-EPC) process was introduced and its basic principles or effect factors were further analyzed. According to theoretical calculation and experimental results, the major casting parameters that are of great and critical importance on the process include pressure and flux of filling gas, decomposition characteristic and density of foam pattern, thickness and permeability of coating, pouring temperature, vacuum degree and their combination. Most of casting defects can be effectively avoided by choosing the suitable parameters. The success achieved in pouring motor housing and exhaust manifold castings demonstrates the advantages of LP-EPC process in the production of high-complicated castings with high dimension accuracy.

Editorial on hemoglobin A1c, blood pressure, and lowdensity lipoprotein cholesterol goals in diabetics

The American Diabetes Association (ADA) 2013 guidelines state that a reasonable hemoglobin A1c goal for many nonpregnant adults with diabetes is less than 7.0% a hemoglobin A1c level of less than 6.5% may be considered in adults with short duration of diabetes, long life expectancy, and no significant cardiovascular disease if this can be achieved without significant hypoglycemia or other adverse effects of treatment. A hemoglobin A1c level less than 8.0% may be appropriate for patients with a history of severe hypoglycemia, limited life expectancy, advanced macrovascular and microvascular complications, extensive comorbidities, and long-standing diabetes in whom the hemoglobin A1c goal is difficult to attain despite multiple glucoselowering drugs including insulin. The ADA 2013 guidelines recommend that the systolic blood pressure in most diabetics with hypertension should be reduced to less than 140 mmHg. These guidelines also recommend use of an angiotensin-converting enzyme inhibitor or angiotensin receptor blocker in the treatment of hypertension in diabetics unless they are pregnant. Diabetics at high risk for cardiovascular events should have theirserum low-density lipoprotein (LDL) cholesterol lowered to less than 70 mg/dL with statins. Lower-risk diabetics should have their serum LDL cholesterol reduced to less than 100 mg/dL. Combination therapy of a statin with either a fibrate or niacin has not been shown to provide additional cardiovascular benefit above statin therapy alone and is not recommended. Hypertriglyceridemia should be treated with dietary and lifestyle changes. Severe hypertriglyceridemia should be treated with drug therapy to reduce the risk of acute pancreatitis.

Study of the Constituent of Abnormal Low Pressure Compartment and Fluid Characteristics in Huatugou Oilfield,Qaidam Basin

Based on the comprehensive research on core samples,well testing data and fluid parameters of the reservoirs,the depositional architecture of the abnormal low pressure compartment and fluid characteristics of Huatugou oilfield of Qaidam basin were reported,and the correlation between the compartment and hydrocarbon accumulation was revealed. The result indicates that the reservoirs are located

Thickening and Rheological Properties of Crystalline Polyester Used in Low Pressure Sheet Molding Compounds

Low pressure sheet molding compound （LPMC,1.0-3.0 MPa,95-103 ℃） is a new kind of thermosetting material with crystalline polyester as a physical thickenner.LPMC is different from conventional SMC using an earth oxide thickening agent （e.g.MgO） as chemical thickenner,it relies on the physical thickening of crystalline polyester.Crystalline polyester resin is the key material to mold LPMC parts.Currently there was no report about the thickening mechanism of crystalline polyester in LPMC.In this article,crystalline polyester resins,whose melting points were between 45 ℃ and 89 ℃,were synthesized by a two-step esterification.The melt points of crystalline polyesters are controlled by regulating the mol ratio of the two glycols and the two acids.And by means of varying the content of crystalline polyester resin,the thickening effect on resin paste is investigated.In addition,the thickening mechanism of crystalline polyester in LPMC was investigated by FTIR and DSC analysis.The effects of the diameters and viscosity of crystalline polyester on the rheological property and fiber distribution of LPMC sheets were studied,too.Results show that the thickening effect is excellent when the weight content of crystalline polyester resin is 3%.And there exists three kinds of functions acting in the process of thickening：swelling,hydrogen bonds and induction crystallization.During the preparing process of resin paste in LPMC,the temperature of resin paste must be kept at 90 ℃.In addition,crystalline polyester make LPMC have a perfect fluid property.When the viscosity of LPMC sheet is beyond 1 kPa s,the fiber orientation is not obvious.But when the viscosity of LPMC sheet is about 500 Pa s,the fiber shows a certain degree of orientation.Moreover the study of physical and chemical thickening mechanism of crystalline polyester and the rheological discipline of LPMC sheets in the hot mould will provide the researchers and enterprises with theory guidance.