The paper provides a comprehensive scheme for assessment of the residual service life and extension of operating life of steam turbine rotors with expired fleet service life.The residual service life of high temperatu...The paper provides a comprehensive scheme for assessment of the residual service life and extension of operating life of steam turbine rotors with expired fleet service life.The residual service life of high temperature rotors for high&intermediate pressure cylinders of K-200-130-3 steam turbine without heat grooves calculated and it was showed that the residual service life of high&intermediate pressure rotors without grooves has been extended as compared to the K-200-130-1 turbine rotors with grooves.Also residual life management by supplying hot steam to the HPC and 1PC seals was investigated and it was noted their significant impact on the residual service life.展开更多
In the present work the aerodynamic performances of an innovative rotor blade row have been experimentally investigated. Measurements have been carried out in a large scale low speed single stage cold flow facility at...In the present work the aerodynamic performances of an innovative rotor blade row have been experimentally investigated. Measurements have been carried out in a large scale low speed single stage cold flow facility at a Reynolds number typical of aeroengine cruise, under nominal and off-design conditions. The time-mean blade aerodynamic loadings have been measured at three radial positions along the blade height through a pressure transducer installed inside the hollow shaft, by delivering the signal to the stationary frame with a slip ring. The time mean aerodynamic flow fields upstream and downstream of the rotor have been measured by means of a five-hole probe to investigate the losses associated with the rotor. The investigations in the single stage research turbine allow the reproduction of both wake-boundary layer interaction as well as vortex-vortex interaction. The detail of the present results clearly highlights the strong dissipative effects induced by the blade tip vortex and by the momentum defect as well as the turbulence production, which is generated during the migration of the stator wake in the rotor passage. Phase-locked hot-wire investigations have been also performed to analyze the time-varying flow during the wake passing period. In particular the interaction between stator and rotor structures has been investigated also under off-design conditions to further explain the mechanisms contributing to the loss generation for the different conditions.展开更多
构建以新能源为主体的新型电力系统,对燃煤发电机组深度调峰和超低负荷运行提出了越来越严苛的要求,进而对汽轮机组低负荷安全运行提出了越来越严峻的挑战。采用数值模拟方法,基于低负荷工况下汽轮机末级运行性能的深入分析,着重研究探...构建以新能源为主体的新型电力系统,对燃煤发电机组深度调峰和超低负荷运行提出了越来越严苛的要求,进而对汽轮机组低负荷安全运行提出了越来越严峻的挑战。采用数值模拟方法,基于低负荷工况下汽轮机末级运行性能的深入分析,着重研究探索了不同解决方案在超低负荷工况下的工作机理与优化效果。研究发现,当机组从中低负荷下降到超低负荷时,末级叶片附近出现间隙涡、回流涡和分离涡等涡群,其范围随着负荷的减小逐渐扩大。低负荷工况降低机组背压和低压缸切缸运行是弱化汽轮机涡流、提高末级性能的有效途径,二者结合使用效果更佳。例如,在20%热耗率验收(THA)工况条件下,将背压从4.9 k Pa降低到2.5 k Pa,使得末级涡群影响范围明显减小,转子叶片转矩从–38 N·m增加到73N·m,末级运行性能明显改善。在10%THA工况下,采用降低背压和低压缸切缸相结合可使叶顶间隙涡完全消失,回流涡和分离涡的径向长度都减小50%以上;优化后的动叶转矩增加了约130 N·m,末级运行性能改善效果显著。展开更多
The optimized structure strength design and finite element analysis method for very high pressure （VHP） rotors of the 700℃ ultra-super-critical （USC） steam turbine are presented. The main parameters of steam and ...The optimized structure strength design and finite element analysis method for very high pressure （VHP） rotors of the 700℃ ultra-super-critical （USC） steam turbine are presented. The main parameters of steam and the steam thermal parameters of blade stages of VHP welded rotors as well as the start and shutdown curves of the steam turbine are determined. The structure design feature, the mechanical models and the typical position of stress analysis of the VHP welded rotors are introduced. The steady and transient finite element analysis are implemented for steady condition, start and shutdown process, including steady rated condition, 110% rated speed, 120% rated speed, cold start, warm start, hot start, very hot start, sliding-pressure shutdown, normal shutdown and emergency shutdown, to obtain the temperature and stress distribution as well as the stress ratio of the welded rotor. The strength design criteria and strength analysis results of the welded rotor are given. The results show that the strength design of improved structure of the VHP welded rotor of the 700℃ USC steam turbine is safe at the steady condition and during the transient start or shutdown process.展开更多
文摘The paper provides a comprehensive scheme for assessment of the residual service life and extension of operating life of steam turbine rotors with expired fleet service life.The residual service life of high temperature rotors for high&intermediate pressure cylinders of K-200-130-3 steam turbine without heat grooves calculated and it was showed that the residual service life of high&intermediate pressure rotors without grooves has been extended as compared to the K-200-130-1 turbine rotors with grooves.Also residual life management by supplying hot steam to the HPC and 1PC seals was investigated and it was noted their significant impact on the residual service life.
基金funded by the European Community’s Seventh Framework Programme(FP7/2007-2013)for the Clean Sky Joint Technology Initiative under grant agreement n°[323301]
文摘In the present work the aerodynamic performances of an innovative rotor blade row have been experimentally investigated. Measurements have been carried out in a large scale low speed single stage cold flow facility at a Reynolds number typical of aeroengine cruise, under nominal and off-design conditions. The time-mean blade aerodynamic loadings have been measured at three radial positions along the blade height through a pressure transducer installed inside the hollow shaft, by delivering the signal to the stationary frame with a slip ring. The time mean aerodynamic flow fields upstream and downstream of the rotor have been measured by means of a five-hole probe to investigate the losses associated with the rotor. The investigations in the single stage research turbine allow the reproduction of both wake-boundary layer interaction as well as vortex-vortex interaction. The detail of the present results clearly highlights the strong dissipative effects induced by the blade tip vortex and by the momentum defect as well as the turbulence production, which is generated during the migration of the stator wake in the rotor passage. Phase-locked hot-wire investigations have been also performed to analyze the time-varying flow during the wake passing period. In particular the interaction between stator and rotor structures has been investigated also under off-design conditions to further explain the mechanisms contributing to the loss generation for the different conditions.
文摘构建以新能源为主体的新型电力系统,对燃煤发电机组深度调峰和超低负荷运行提出了越来越严苛的要求,进而对汽轮机组低负荷安全运行提出了越来越严峻的挑战。采用数值模拟方法,基于低负荷工况下汽轮机末级运行性能的深入分析,着重研究探索了不同解决方案在超低负荷工况下的工作机理与优化效果。研究发现,当机组从中低负荷下降到超低负荷时,末级叶片附近出现间隙涡、回流涡和分离涡等涡群,其范围随着负荷的减小逐渐扩大。低负荷工况降低机组背压和低压缸切缸运行是弱化汽轮机涡流、提高末级性能的有效途径,二者结合使用效果更佳。例如,在20%热耗率验收(THA)工况条件下,将背压从4.9 k Pa降低到2.5 k Pa,使得末级涡群影响范围明显减小,转子叶片转矩从–38 N·m增加到73N·m,末级运行性能明显改善。在10%THA工况下,采用降低背压和低压缸切缸相结合可使叶顶间隙涡完全消失,回流涡和分离涡的径向长度都减小50%以上;优化后的动叶转矩增加了约130 N·m,末级运行性能改善效果显著。
文摘The optimized structure strength design and finite element analysis method for very high pressure （VHP） rotors of the 700℃ ultra-super-critical （USC） steam turbine are presented. The main parameters of steam and the steam thermal parameters of blade stages of VHP welded rotors as well as the start and shutdown curves of the steam turbine are determined. The structure design feature, the mechanical models and the typical position of stress analysis of the VHP welded rotors are introduced. The steady and transient finite element analysis are implemented for steady condition, start and shutdown process, including steady rated condition, 110% rated speed, 120% rated speed, cold start, warm start, hot start, very hot start, sliding-pressure shutdown, normal shutdown and emergency shutdown, to obtain the temperature and stress distribution as well as the stress ratio of the welded rotor. The strength design criteria and strength analysis results of the welded rotor are given. The results show that the strength design of improved structure of the VHP welded rotor of the 700℃ USC steam turbine is safe at the steady condition and during the transient start or shutdown process.
