The oxidation behaviors of two kinds of low segregation Ht-Cr-Al based superalloys have been studied between 1000-1100℃, and compared with that of general Mt-Cr-Al based superalloys. The results indicated that the si...The oxidation behaviors of two kinds of low segregation Ht-Cr-Al based superalloys have been studied between 1000-1100℃, and compared with that of general Mt-Cr-Al based superalloys. The results indicated that the simultaneous additions of 0.1 wt% S and 0. 1 wt% Zr to low segregation alloys increase the oxidation rate of Al2O3-forming alloy and improve the scale adherence. The addition of 0.1 wt% Zr can ,minimize the negative effects of S on the adherence of Al2O3 scale. Low amounts of S(≤50 ppm wt) have no obviously negative effects on the adherence of Cr2O3 scale formed on one of the low segregation superalloys.展开更多
The specimens of 1Cr-0.5Mo low alloy steel, undoped, Sn-doped and Ce＋Sn-doped, were austenitized at 1300 oC and then cooled down to different temperatures in the range of 700–1050 oC, followed by tensile tests with ...The specimens of 1Cr-0.5Mo low alloy steel, undoped, Sn-doped and Ce＋Sn-doped, were austenitized at 1300 oC and then cooled down to different temperatures in the range of 700–1050 oC, followed by tensile tests with the aid of a Gleeble machine. The reduction of area（RA） obtained from the test was employed to evaluate the hot ductility of the steel. The tested specimens were characterized using different techniques. Minor Sn could considerably reduce the RA values of the steel in the whole temperature range, and the hot ductility curve could be widened and deepened. Nevertheless, minor Ce could improve the hot ductility of the Ce＋Sn-doped steel by fully suppressing the Sn-induced hot ductility deterioration. FEGSTEM microanalysis showed that the Sn or Ce and Sn atoms segregated to austenite grain boundaries in the Sn-doped or Ce＋Sn doped specimens. The detrimental effect of Sn on the hot ductility could be attributed mainly to the segregation of Sn as it could decrease the grain boundary cohesion and in turn enhanced the grain boundary sliding and cracking. However, this detrimental effect of Sn could be counteracted by the segregation of Ce which could increase the grain boundary cohesion and in turn restrained the grain boundary sliding and cracking. Accordingly, a minor addition of rare earth Ce could be an effective method of suppressing the detrimental effect of impurity elements on the hot ductility of a Cr-Mo low alloy steel.展开更多
文摘The oxidation behaviors of two kinds of low segregation Ht-Cr-Al based superalloys have been studied between 1000-1100℃, and compared with that of general Mt-Cr-Al based superalloys. The results indicated that the simultaneous additions of 0.1 wt% S and 0. 1 wt% Zr to low segregation alloys increase the oxidation rate of Al2O3-forming alloy and improve the scale adherence. The addition of 0.1 wt% Zr can ,minimize the negative effects of S on the adherence of Al2O3 scale. Low amounts of S(≤50 ppm wt) have no obviously negative effects on the adherence of Cr2O3 scale formed on one of the low segregation superalloys.
基金Project supported by the National Natural Science Foundation of China(51071060)
文摘The specimens of 1Cr-0.5Mo low alloy steel, undoped, Sn-doped and Ce＋Sn-doped, were austenitized at 1300 oC and then cooled down to different temperatures in the range of 700–1050 oC, followed by tensile tests with the aid of a Gleeble machine. The reduction of area（RA） obtained from the test was employed to evaluate the hot ductility of the steel. The tested specimens were characterized using different techniques. Minor Sn could considerably reduce the RA values of the steel in the whole temperature range, and the hot ductility curve could be widened and deepened. Nevertheless, minor Ce could improve the hot ductility of the Ce＋Sn-doped steel by fully suppressing the Sn-induced hot ductility deterioration. FEGSTEM microanalysis showed that the Sn or Ce and Sn atoms segregated to austenite grain boundaries in the Sn-doped or Ce＋Sn doped specimens. The detrimental effect of Sn on the hot ductility could be attributed mainly to the segregation of Sn as it could decrease the grain boundary cohesion and in turn enhanced the grain boundary sliding and cracking. However, this detrimental effect of Sn could be counteracted by the segregation of Ce which could increase the grain boundary cohesion and in turn restrained the grain boundary sliding and cracking. Accordingly, a minor addition of rare earth Ce could be an effective method of suppressing the detrimental effect of impurity elements on the hot ductility of a Cr-Mo low alloy steel.
