Modern electronic circuit requires compact,multifunctional technology in communication systems.However,it is very difficult due to the limitations in passive component miniaturization and the complication of fabricati...Modern electronic circuit requires compact,multifunctional technology in communication systems.However,it is very difficult due to the limitations in passive component miniaturization and the complication of fabrication process.The bandpass filter is one of the most important passive components in millimeter（mm）-wave communication system,attracting significant interest in three-dimension（3D） miniaturized design,which is few reported.In this paper,a bandpass filter structure using low-temperature co-fired ceramic（LTCC） technology,which is fully integrated in a system-in package（SIP） communication module,is presented for miniaturized and high reliable mm-wave application.The bandpass filter with 3D end-coupled microstrip resonators is implemented in order to achieve a high performance bandwidth characteristic.Specifically,all of the resonators are embedded into different ceramic layers to decrease the insertion loss and enhance the out-of-band rejection performance by optimizing the coupling coefficient and the coupling strength.A fence structure,which is formed by metal-filled via array with the gap less than quarter wavelength,is placed around the embedded bandpass filter to avoid electromagnetic（EM） interference problem in multilayer structure.This structural model is validated through actual LTCC process.The bandpass filter is successfully manufactured by modifying the co-fireablity characteristics,adjusting the sintering profile,releasing the interfacial stress,and reducing the shrinkage mismatch with different materials.Measured results show good performance and agree well with the high frequency EM full wave simulation.The influence of layer thickness and dielectric constant on the frequency response in fabricated process is analyzed,where thicker ceramic sheets let the filter response shift to higher frequency.Moreover,measured S-parameters denote the center frequency is also strongly influenced by the variation of ceramic material＇s dielectric constants.By analyzing the relationship between the characteristics of the ceramic tape and the center frequency of the filter,both theoretical and experimental data are accumulated for broadening application filed.With the coupling resonators embedded into the ceramic layers,the bandpass filter exhibits advantages of small size and high reliability compared to conventional planar filter structure,which makes the bandpass filter suitable for SIP communicational application.展开更多
The implementation and characteristics of a compact lumped-element three-order low pass filter are presented in this paper. The filter with 120 MHz cut off frequency, as well as more than 20 dB of the attenuation abov...The implementation and characteristics of a compact lumped-element three-order low pass filter are presented in this paper. The filter with 120 MHz cut off frequency, as well as more than 20 dB of the attenuation above 360 MHz frequency band is successfully manufactured in an LTCC substrate with 40 pm layer thickness. The overall size of the filter is 2.0 mm×1.2 mm×0.9 mm. A good coincidence between the measured results and the full-wave electromagnetic designed responses is observed.展开更多
This paper describes technology of the electromagnetic pump made in a hybrid polymer-ceramic technology. The pumping mechanism is realized with a mutual excitation between an electromagnetic coil and a neodymium magne...This paper describes technology of the electromagnetic pump made in a hybrid polymer-ceramic technology. The pumping mechanism is realized with a mutual excitation between an electromagnetic coil and a neodymium magnet bonded to a flexible membrane. A PDMS （poly（dimethylsiloxane）） material was used to manufacture a membrane sufficient for the presented micropump. A fish trap construction is adapted to the ceramic technology. The bonding process of ceramics and polymer, using plasma oxidation method, is described as well. Moreover, a membrane deflection depending on magnet dimensions and applied voltage was measured.展开更多
介绍了一种新型贴片式多层陶瓷巴伦。该巴伦是基于LTCC（Low Temperature Co-fired Ceramic,低温共烧陶瓷）技术设计的新型多层结构巴伦，采用独特的螺旋线宽边耦合带状线结构（SBCS），并且增加了端电容，极大地缩小了巴伦尺寸。设计...介绍了一种新型贴片式多层陶瓷巴伦。该巴伦是基于LTCC（Low Temperature Co-fired Ceramic,低温共烧陶瓷）技术设计的新型多层结构巴伦，采用独特的螺旋线宽边耦合带状线结构（SBCS），并且增加了端电容，极大地缩小了巴伦尺寸。设计的巴伦频率范围为2．4～2．5GHz，具有尺寸小、插损低、平衡度好等优点，并且工艺敏感度低，可应用于蓝牙通讯系统。文章讨论了其小型化思路与方案，描述了所设计巴伦的3D结构，给出了设计仿真结果与实验结果，两者吻合较好。展开更多
基金supported by Research Fund for the Doctoral Program of Higher Education of China(Grant No.20060614021)Sichuan Provincial Fundamental Research of China(Grant No.2008JY0057),Fundamental Research Funds for the Central Universities of China(Grant No.ZYGX2009J091)
文摘Modern electronic circuit requires compact,multifunctional technology in communication systems.However,it is very difficult due to the limitations in passive component miniaturization and the complication of fabrication process.The bandpass filter is one of the most important passive components in millimeter（mm）-wave communication system,attracting significant interest in three-dimension（3D） miniaturized design,which is few reported.In this paper,a bandpass filter structure using low-temperature co-fired ceramic（LTCC） technology,which is fully integrated in a system-in package（SIP） communication module,is presented for miniaturized and high reliable mm-wave application.The bandpass filter with 3D end-coupled microstrip resonators is implemented in order to achieve a high performance bandwidth characteristic.Specifically,all of the resonators are embedded into different ceramic layers to decrease the insertion loss and enhance the out-of-band rejection performance by optimizing the coupling coefficient and the coupling strength.A fence structure,which is formed by metal-filled via array with the gap less than quarter wavelength,is placed around the embedded bandpass filter to avoid electromagnetic（EM） interference problem in multilayer structure.This structural model is validated through actual LTCC process.The bandpass filter is successfully manufactured by modifying the co-fireablity characteristics,adjusting the sintering profile,releasing the interfacial stress,and reducing the shrinkage mismatch with different materials.Measured results show good performance and agree well with the high frequency EM full wave simulation.The influence of layer thickness and dielectric constant on the frequency response in fabricated process is analyzed,where thicker ceramic sheets let the filter response shift to higher frequency.Moreover,measured S-parameters denote the center frequency is also strongly influenced by the variation of ceramic material＇s dielectric constants.By analyzing the relationship between the characteristics of the ceramic tape and the center frequency of the filter,both theoretical and experimental data are accumulated for broadening application filed.With the coupling resonators embedded into the ceramic layers,the bandpass filter exhibits advantages of small size and high reliability compared to conventional planar filter structure,which makes the bandpass filter suitable for SIP communicational application.
基金This work was supported by the National Nature Science Foundation of China under Grant No. 60425102.
文摘The implementation and characteristics of a compact lumped-element three-order low pass filter are presented in this paper. The filter with 120 MHz cut off frequency, as well as more than 20 dB of the attenuation above 360 MHz frequency band is successfully manufactured in an LTCC substrate with 40 pm layer thickness. The overall size of the filter is 2.0 mm×1.2 mm×0.9 mm. A good coincidence between the measured results and the full-wave electromagnetic designed responses is observed.
文摘This paper describes technology of the electromagnetic pump made in a hybrid polymer-ceramic technology. The pumping mechanism is realized with a mutual excitation between an electromagnetic coil and a neodymium magnet bonded to a flexible membrane. A PDMS （poly（dimethylsiloxane）） material was used to manufacture a membrane sufficient for the presented micropump. A fish trap construction is adapted to the ceramic technology. The bonding process of ceramics and polymer, using plasma oxidation method, is described as well. Moreover, a membrane deflection depending on magnet dimensions and applied voltage was measured.
文摘介绍了一种新型贴片式多层陶瓷巴伦。该巴伦是基于LTCC（Low Temperature Co-fired Ceramic,低温共烧陶瓷）技术设计的新型多层结构巴伦，采用独特的螺旋线宽边耦合带状线结构（SBCS），并且增加了端电容，极大地缩小了巴伦尺寸。设计的巴伦频率范围为2．4～2．5GHz，具有尺寸小、插损低、平衡度好等优点，并且工艺敏感度低，可应用于蓝牙通讯系统。文章讨论了其小型化思路与方案，描述了所设计巴伦的3D结构，给出了设计仿真结果与实验结果，两者吻合较好。
