There is a prominent,complex and diverse three-dimensional climate and a variety of meteorological disasters in Qujing area. The risk zoning of low-temperature disasters for flue-cured tobacco planting in Qujing area ...There is a prominent,complex and diverse three-dimensional climate and a variety of meteorological disasters in Qujing area. The risk zoning of low-temperature disasters for flue-cured tobacco planting in Qujing area was studied to provide reference for drawing on advantages and avoiding disadvantages in flue-cured tobacco planting,disaster reduction,and disaster relief services. According to the production practice of fluecured tobacco and local climate analysis,it was determined that flue-cured tobacco in Qujing area was very vulnerable to low temperature during the seedling stage（ from early February to middle April） and in the mature period（ from early July to early September）. Based on the quantitative analysis and evaluation of risk of disaster-causing factors,sensitivity of disaster-breeding environment,vulnerability of carriers,and disaster prevention and reduction capability,a risk assessment model of meteorological disasters was established to precisely evaluate and zone the risk of low-temperature disasters for flue-cured tobacco planting in allusion to the seedling and mature stage in Qujing area by using GIS technology. The risk of lowtemperature disasters for flue-cured tobacco planting during the two periods was divided into four grades,namely low,medium,high and very high risk.展开更多
In order to lower the imidization temperature of polyamic acids（PAA）, the catalytic activities of the curing agents p-hydroxybenzoic acid（PHA）, quinoline（QL）, benzimidazole（BI）, benzotriazole（BTA）, triethyla...In order to lower the imidization temperature of polyamic acids（PAA）, the catalytic activities of the curing agents p-hydroxybenzoic acid（PHA）, quinoline（QL）, benzimidazole（BI）, benzotriazole（BTA）, triethylamine（Et_3N） and 1, 8-diazabicyclo [5.4.0]undec-7-ene（DBU） were investigated in the process of thermal imidization of PAA. In addition, the effect of these various curing agents on the thermal stabilities and mechanical properties of the resultant polyimide（PI） films was determined. Quinoline was found to be an effective curing accelerator in the use of two-step method for synthesizing PI. Due to its moderate base strength, low steric crowding effect and moderate boiling point, quinoline could not only accelerate PAA to achieve imidization completely at 180 ℃, but also maintain the mechanical properties and thermal stability of the ordinary PI film. Any residual quinoline could be removed from PI films by heating at 250 ℃ for 4 h.展开更多
Extensive researches have been carried out on the conventional sulfate attack, while it has been found that the thaumasite form of sulfate attack（TSA）, sulfate attack at low temperature, has just been discovered and...Extensive researches have been carried out on the conventional sulfate attack, while it has been found that the thaumasite form of sulfate attack（TSA）, sulfate attack at low temperature, has just been discovered and its mechanism is not well understood so far. In this study, the sulfate attack of cement paste incorporating 30% mass of limestone powder was investigated. After 20 ℃ water cured for 7, 14, and 28 days,respectively, 20 mm cube specimens were exposed in a 5% magnesium sulfate solution at（6 ±1） ℃ for periods up to 240 days. Their appearance change, compressive strength development were examined at different storage time, and selected paste samples were examined by X-ray diffraction（XRD）, Fourier transform infrared spectroscopy（FTIR）, scanning electron microscopy（SEM） and energy dispersive spectroscopy（EDS）. The results indicate that all Portland-limstone cement pastes suffer from appearance deterioration to some extent. The compressive strength of cement paste initially increases and after 120 days decreases with increasing exposed period. In addition, the cement paste with short curing time is more susceptible to sulfate attack, which directly leads to the formation of non-binder thaumasite crystal accompanied by the formation of ettringite, gypsum and brucite, and becomes a white, mushy, and incohesive matrix. Additionally, the extent of sulfate attack is greater and the formation of thaumasite is observed earlier for shorter curing time.展开更多
基金Supported by China National Tobacco Corporation(Yunnan Tobacco Science and Technology Program No.[2014]302,program contract number:2014YN22)
文摘There is a prominent,complex and diverse three-dimensional climate and a variety of meteorological disasters in Qujing area. The risk zoning of low-temperature disasters for flue-cured tobacco planting in Qujing area was studied to provide reference for drawing on advantages and avoiding disadvantages in flue-cured tobacco planting,disaster reduction,and disaster relief services. According to the production practice of fluecured tobacco and local climate analysis,it was determined that flue-cured tobacco in Qujing area was very vulnerable to low temperature during the seedling stage（ from early February to middle April） and in the mature period（ from early July to early September）. Based on the quantitative analysis and evaluation of risk of disaster-causing factors,sensitivity of disaster-breeding environment,vulnerability of carriers,and disaster prevention and reduction capability,a risk assessment model of meteorological disasters was established to precisely evaluate and zone the risk of low-temperature disasters for flue-cured tobacco planting in allusion to the seedling and mature stage in Qujing area by using GIS technology. The risk of lowtemperature disasters for flue-cured tobacco planting during the two periods was divided into four grades,namely low,medium,high and very high risk.
文摘In order to lower the imidization temperature of polyamic acids（PAA）, the catalytic activities of the curing agents p-hydroxybenzoic acid（PHA）, quinoline（QL）, benzimidazole（BI）, benzotriazole（BTA）, triethylamine（Et_3N） and 1, 8-diazabicyclo [5.4.0]undec-7-ene（DBU） were investigated in the process of thermal imidization of PAA. In addition, the effect of these various curing agents on the thermal stabilities and mechanical properties of the resultant polyimide（PI） films was determined. Quinoline was found to be an effective curing accelerator in the use of two-step method for synthesizing PI. Due to its moderate base strength, low steric crowding effect and moderate boiling point, quinoline could not only accelerate PAA to achieve imidization completely at 180 ℃, but also maintain the mechanical properties and thermal stability of the ordinary PI film. Any residual quinoline could be removed from PI films by heating at 250 ℃ for 4 h.
基金Funded by National Natural Science Foundation of China(No.51378499)China Railway Corporation(No.2014G004-R)Science and Technology of China(No.2010G004-E)
文摘Extensive researches have been carried out on the conventional sulfate attack, while it has been found that the thaumasite form of sulfate attack（TSA）, sulfate attack at low temperature, has just been discovered and its mechanism is not well understood so far. In this study, the sulfate attack of cement paste incorporating 30% mass of limestone powder was investigated. After 20 ℃ water cured for 7, 14, and 28 days,respectively, 20 mm cube specimens were exposed in a 5% magnesium sulfate solution at（6 ±1） ℃ for periods up to 240 days. Their appearance change, compressive strength development were examined at different storage time, and selected paste samples were examined by X-ray diffraction（XRD）, Fourier transform infrared spectroscopy（FTIR）, scanning electron microscopy（SEM） and energy dispersive spectroscopy（EDS）. The results indicate that all Portland-limstone cement pastes suffer from appearance deterioration to some extent. The compressive strength of cement paste initially increases and after 120 days decreases with increasing exposed period. In addition, the cement paste with short curing time is more susceptible to sulfate attack, which directly leads to the formation of non-binder thaumasite crystal accompanied by the formation of ettringite, gypsum and brucite, and becomes a white, mushy, and incohesive matrix. Additionally, the extent of sulfate attack is greater and the formation of thaumasite is observed earlier for shorter curing time.
