The low temperature molten salt method was used to extract potassium from K-feldspar ore, and some related factors including mass ratio between NaNO_3, NaOH, H_2O and K-feldspar ore, particle size of K-feldspar ore,re...The low temperature molten salt method was used to extract potassium from K-feldspar ore, and some related factors including mass ratio between NaNO_3, NaOH, H_2O and K-feldspar ore, particle size of K-feldspar ore,reaction temperature and time were investigated, respectively. In addition, the optimum condition for this method was determined by a series of condition experiments. What was more, the K-feldspar ore and the leach residue after reaction based on the above optimum condition were analyzed by XRD, SEM and EDS,separately. The results of which indicated that the mechanism of extraction of potassium for this method was according to the ion exchange reaction between sodium ion and potassium ion, and the extraction ratio of potassium had an obvious improvement than that of traditional methods, which could reach up to 96.25%.Therefore, this method can be a feasible solution to extract potassium from K-feldspar ore for its low energy consumption and high efficiency.展开更多
A molten salt method was developed to prepare porous La1‐xSrxMn0.8Fe0.2O3 （0≤ x ≤ 0.6） micro‐spheres using hierarchical porous δ‐MnO2 microspheres as a template in eutectic NaNO3‐KNO3. X‐ray diffraction patt...A molten salt method was developed to prepare porous La1‐xSrxMn0.8Fe0.2O3 （0≤ x ≤ 0.6） micro‐spheres using hierarchical porous δ‐MnO2 microspheres as a template in eutectic NaNO3‐KNO3. X‐ray diffraction patterns showed that single phase LaMn0.8Fe0.2O3 with good crystallinity was syn‐thesized at 450℃ after 4 h. Transmission electron microscope images exhibited that the LaMn0.8Fe0.2O3 sample obtained at 450？？ after 4 h possessed a porous spherical morphology com‐posed of aggregated nanocrystallites. Field emission scanning electron microscope images indicated that the growth of the porous LaMn0.8Fe0.2O3 microspheres has two stages. SEM pictures showed that a higher calcination temperature than 450？？ had an adverse effect on the formation of a po‐rous spherical structure. The LaMn0.8Fe0.2O3 sample obtained at 450？？ after 4 h displayed a high BET surface area of 55.73 m2/g with a pore size of 9.38 nm. Fourier transform infrared spectra suggested that Sr2＋ions entered the A sites and induced a decrease of the binding energy between Mn and O. The CO conversion with the La1‐xSrxMn0.8Fe0.2O3 （0≤x≤0.6） samples indicated that the La0.4Sr0.6Mn0.8Fe0.2O3 sample had the best catalytic activity and stability. Further analysis by X‐ray photoelectron spectroscopy demonstrated that Sr2＋doping altered the content of Mn4＋ions, oxygen vacancies and adsorbed oxygen species on the surface, which affected the catalytic performance for CO oxidation.展开更多
A new technology for preparation of low cost Mg-Li alloys was studied. The alloys were prepared by electrolysis in molten LiCl-KCl （weight ratio is 1：1） electrolyte with Mg rod severing as the consumed cathode. Mai...A new technology for preparation of low cost Mg-Li alloys was studied. The alloys were prepared by electrolysis in molten LiCl-KCl （weight ratio is 1：1） electrolyte with Mg rod severing as the consumed cathode. Main factors that affect current efficiency were investigated, and optimal electrolysis parameters were obtained. Mg-Li alloys with low lithium Content （about 25%） were prepared by the unique method of a higher post-thermal treatment temperature after electrolysis at low temperature. The results showed that the electrolysis can be carried out at low temperature, which resulted in reducing preparation cost due to energy saving. The new technology for the oreoaration of Mg-Li alloy by electrolysis in molten salt was laroved to be feasible.展开更多
The electrochemical behavior of Yb3+ and electrodeposition of Mg-Yb alloy film at solid magnesium cathode in the molten LiCl-KCl-YbCl3(2 wt.%) system at 773 K was investigated.Transient electrochemical techniques,such...The electrochemical behavior of Yb3+ and electrodeposition of Mg-Yb alloy film at solid magnesium cathode in the molten LiCl-KCl-YbCl3(2 wt.%) system at 773 K was investigated.Transient electrochemical techniques,such as cyclic voltammetry,chronopotentiometry and chronoamperometry were used in order to explore the deposition mechanism of Yb.The reduction process of Yb3+ is stepwise reactions which are single-electron and double-electron reversible charge transfer reactions.The speed control step was a diffu...展开更多
Cerium oxide film formed on the nickel electrode at 453 K in LiNO3-KNO3 molten salts. The molten salt background and the cathode process of Leeds on the nickel electrode were studied by using cyclic voltammetry. The c...Cerium oxide film formed on the nickel electrode at 453 K in LiNO3-KNO3 molten salts. The molten salt background and the cathode process of Leeds on the nickel electrode were studied by using cyclic voltammetry. The cathodic reaction mechanism of the molten salt background was: O-2(-)+e <----> O-2(-2); O-2+2NO(3)(-) --> 2NO(2)(-)+2O(2). According to the results of SEM and XPS, cerium oxide film, which is composed of CeO2, can form on the nickel electrode at - 1.850 V vs. Ag/AgNO3 (0.1 mol/L) reference electrode.展开更多
基于我国生物质废弃物的产量、分布和利用现状,分析了生物质废弃物资源利用过程中转运能耗大和碳排放量高的现状,指出相比于压缩、干燥、烘焙等方法,低温热解预处理技术在生物质废弃物减容提质方面更具优势;论证了生物质废弃物减容提质...基于我国生物质废弃物的产量、分布和利用现状,分析了生物质废弃物资源利用过程中转运能耗大和碳排放量高的现状,指出相比于压缩、干燥、烘焙等方法,低温热解预处理技术在生物质废弃物减容提质方面更具优势;论证了生物质废弃物减容提质预处理对其资源利用过程的降耗减排具有一定的作用,提出将具有调峰能力强、使用寿命长、规模化成本低、安全环保等优点的熔盐储能技术应用于生物质废弃物低温热解预处理中,并通过基于耦合熔盐储能的生物质废弃物低温热解处理工艺案例的综合分析,验证了该工艺的可行性和经济性。结果表明:由于熔盐储能对清洁能源电能的消纳及波谷电的存储利用,可有效提高生物质废弃物能源利用过程中的能量利用率,使碳排放量减少达378.49 t CO_(2eq)/a,并可获得良好的经济效益回报(内部收益率大于行业基准收益率),从而实现“无序”生物质废弃物的“有序”能源化利用,对双碳战略具有重要意义。展开更多
基金Supported by the National Natural Science Foundation of China(21373252)Fundamental Research Project of Qing Hai Science&Technology Department(2016-ZJ-749)Qinghai Innovation Fund for Technology Based Firms(2014-GX-Q19)
文摘The low temperature molten salt method was used to extract potassium from K-feldspar ore, and some related factors including mass ratio between NaNO_3, NaOH, H_2O and K-feldspar ore, particle size of K-feldspar ore,reaction temperature and time were investigated, respectively. In addition, the optimum condition for this method was determined by a series of condition experiments. What was more, the K-feldspar ore and the leach residue after reaction based on the above optimum condition were analyzed by XRD, SEM and EDS,separately. The results of which indicated that the mechanism of extraction of potassium for this method was according to the ion exchange reaction between sodium ion and potassium ion, and the extraction ratio of potassium had an obvious improvement than that of traditional methods, which could reach up to 96.25%.Therefore, this method can be a feasible solution to extract potassium from K-feldspar ore for its low energy consumption and high efficiency.
基金supported by the National Science Foundation for Young Scientists of China (51202171)~~
文摘A molten salt method was developed to prepare porous La1‐xSrxMn0.8Fe0.2O3 （0≤ x ≤ 0.6） micro‐spheres using hierarchical porous δ‐MnO2 microspheres as a template in eutectic NaNO3‐KNO3. X‐ray diffraction patterns showed that single phase LaMn0.8Fe0.2O3 with good crystallinity was syn‐thesized at 450℃ after 4 h. Transmission electron microscope images exhibited that the LaMn0.8Fe0.2O3 sample obtained at 450？？ after 4 h possessed a porous spherical morphology com‐posed of aggregated nanocrystallites. Field emission scanning electron microscope images indicated that the growth of the porous LaMn0.8Fe0.2O3 microspheres has two stages. SEM pictures showed that a higher calcination temperature than 450？？ had an adverse effect on the formation of a po‐rous spherical structure. The LaMn0.8Fe0.2O3 sample obtained at 450？？ after 4 h displayed a high BET surface area of 55.73 m2/g with a pore size of 9.38 nm. Fourier transform infrared spectra suggested that Sr2＋ions entered the A sites and induced a decrease of the binding energy between Mn and O. The CO conversion with the La1‐xSrxMn0.8Fe0.2O3 （0≤x≤0.6） samples indicated that the La0.4Sr0.6Mn0.8Fe0.2O3 sample had the best catalytic activity and stability. Further analysis by X‐ray photoelectron spectroscopy demonstrated that Sr2＋doping altered the content of Mn4＋ions, oxygen vacancies and adsorbed oxygen species on the surface, which affected the catalytic performance for CO oxidation.
文摘A new technology for preparation of low cost Mg-Li alloys was studied. The alloys were prepared by electrolysis in molten LiCl-KCl （weight ratio is 1：1） electrolyte with Mg rod severing as the consumed cathode. Main factors that affect current efficiency were investigated, and optimal electrolysis parameters were obtained. Mg-Li alloys with low lithium Content （about 25%） were prepared by the unique method of a higher post-thermal treatment temperature after electrolysis at low temperature. The results showed that the electrolysis can be carried out at low temperature, which resulted in reducing preparation cost due to energy saving. The new technology for the oreoaration of Mg-Li alloy by electrolysis in molten salt was laroved to be feasible.
基金supported by 863 Project of Ministry of Science and Technology of China (2006AA03Z510)the National Natural Science Foundation of China (50871033)+1 种基金the Scientific Technology Project of Heilongjiang Province (GC06A212)the fund from Harbin Municipal Science & Technology Bureau (2006PFXXG006)
文摘The electrochemical behavior of Yb3+ and electrodeposition of Mg-Yb alloy film at solid magnesium cathode in the molten LiCl-KCl-YbCl3(2 wt.%) system at 773 K was investigated.Transient electrochemical techniques,such as cyclic voltammetry,chronopotentiometry and chronoamperometry were used in order to explore the deposition mechanism of Yb.The reduction process of Yb3+ is stepwise reactions which are single-electron and double-electron reversible charge transfer reactions.The speed control step was a diffu...
基金[The project was financially supported by the National Science Foundation of China.]
文摘Cerium oxide film formed on the nickel electrode at 453 K in LiNO3-KNO3 molten salts. The molten salt background and the cathode process of Leeds on the nickel electrode were studied by using cyclic voltammetry. The cathodic reaction mechanism of the molten salt background was: O-2(-)+e <----> O-2(-2); O-2+2NO(3)(-) --> 2NO(2)(-)+2O(2). According to the results of SEM and XPS, cerium oxide film, which is composed of CeO2, can form on the nickel electrode at - 1.850 V vs. Ag/AgNO3 (0.1 mol/L) reference electrode.
文摘基于我国生物质废弃物的产量、分布和利用现状,分析了生物质废弃物资源利用过程中转运能耗大和碳排放量高的现状,指出相比于压缩、干燥、烘焙等方法,低温热解预处理技术在生物质废弃物减容提质方面更具优势;论证了生物质废弃物减容提质预处理对其资源利用过程的降耗减排具有一定的作用,提出将具有调峰能力强、使用寿命长、规模化成本低、安全环保等优点的熔盐储能技术应用于生物质废弃物低温热解预处理中,并通过基于耦合熔盐储能的生物质废弃物低温热解处理工艺案例的综合分析,验证了该工艺的可行性和经济性。结果表明:由于熔盐储能对清洁能源电能的消纳及波谷电的存储利用,可有效提高生物质废弃物能源利用过程中的能量利用率,使碳排放量减少达378.49 t CO_(2eq)/a,并可获得良好的经济效益回报(内部收益率大于行业基准收益率),从而实现“无序”生物质废弃物的“有序”能源化利用,对双碳战略具有重要意义。
