在大规模红外读出电路中,接口电路的数据传输效率及接口数量尤为关键。传统接口电路采用并行接口进行数据传输,这种方式会占用较多的芯片引脚。为了提升数据的传输效率,设计了一款用于数据接收的3通道串行低压差分信号(Low Voltage Diff...在大规模红外读出电路中,接口电路的数据传输效率及接口数量尤为关键。传统接口电路采用并行接口进行数据传输,这种方式会占用较多的芯片引脚。为了提升数据的传输效率,设计了一款用于数据接收的3通道串行低压差分信号(Low Voltage Differential Signaling, LVDS)接口电路。电路采用0.18um互补金属氧化物半导体(Complementary Metal Oxide Semiconductor, CMOS)工艺设计。仿真结果表明,LVDS接口电路在400 MHz频率下,能够将2路接收端数据转换为8路数据并将其输出给内部数字处理单元。与传统并行接口相比,本电路节省了6个数据传输引脚,大大提高了数据传输效率。展开更多
Low Voltage Differential Signaling (LVDS) has become a popular choice for high-speed serial links to conquer the bandwidth bottleneck of intra-chip data transmission. This paper presents the design and the implementat...Low Voltage Differential Signaling (LVDS) has become a popular choice for high-speed serial links to conquer the bandwidth bottleneck of intra-chip data transmission. This paper presents the design and the implementation of LVDS Input/Output (I/O) interface circuits in a standard 0.18 μm CMOS technology using thick gate oxide devices (3.3 V), fully compatible with LVDS standard. In the proposed transmitter, a novel Common-Mode FeedBack (CMFB)circuit is utilized to keep the common-mode output voltage stable over Process, supply Voltage and Temperature (PVT) variations. Because there are no area greedy resistors in the CMFB circuitry, the disadvantage of large die area in existing transmitter structures is avoided. To obtain sufficient gain, the receiver consists of three am- plifying stages: a voltage amplifying stage, a transconductance amplifying stage, and a transimpedance amplifying stage. And to exclude inner nodes with high RC time constant, shunt-shunt negative feedback is introduced in the receiver. A novel active inductor shunt peaking structure is used in the receiver to fulfill the stringent requirements of high speed and wide Common-Mode Input Region (CMIR) without voltage gain, power dissipation and silicon area penalty. Simulation results show that data rates of 2 Gbps and 2.5 Gbps are achieved for the transmitter and receiver with power con- sumption of 13.2 mW and 8.3 mW respectively.展开更多
介绍了一种基于LVDS的高速远程图像数据存储系统。系统以FPGA芯片作为控制核心,采用低压差分信号技术(Low voltage differential signaling,LVDS)接口解串和驱动芯片相结合,保证了有效接收远程数据;采用交替双平面的FLASH编程方式来控...介绍了一种基于LVDS的高速远程图像数据存储系统。系统以FPGA芯片作为控制核心,采用低压差分信号技术(Low voltage differential signaling,LVDS)接口解串和驱动芯片相结合,保证了有效接收远程数据;采用交替双平面的FLASH编程方式来控制图像数据的存储,实现了以28.95MB/s的速度对实时图像数据进行存储的要求。经试验验证和实测证明,该图像数据存储系统性能稳定,数据存储可靠,能满足实际测试要求。展开更多
文摘在大规模红外读出电路中,接口电路的数据传输效率及接口数量尤为关键。传统接口电路采用并行接口进行数据传输,这种方式会占用较多的芯片引脚。为了提升数据的传输效率,设计了一款用于数据接收的3通道串行低压差分信号(Low Voltage Differential Signaling, LVDS)接口电路。电路采用0.18um互补金属氧化物半导体(Complementary Metal Oxide Semiconductor, CMOS)工艺设计。仿真结果表明,LVDS接口电路在400 MHz频率下,能够将2路接收端数据转换为8路数据并将其输出给内部数字处理单元。与传统并行接口相比,本电路节省了6个数据传输引脚,大大提高了数据传输效率。
文摘Low Voltage Differential Signaling (LVDS) has become a popular choice for high-speed serial links to conquer the bandwidth bottleneck of intra-chip data transmission. This paper presents the design and the implementation of LVDS Input/Output (I/O) interface circuits in a standard 0.18 μm CMOS technology using thick gate oxide devices (3.3 V), fully compatible with LVDS standard. In the proposed transmitter, a novel Common-Mode FeedBack (CMFB)circuit is utilized to keep the common-mode output voltage stable over Process, supply Voltage and Temperature (PVT) variations. Because there are no area greedy resistors in the CMFB circuitry, the disadvantage of large die area in existing transmitter structures is avoided. To obtain sufficient gain, the receiver consists of three am- plifying stages: a voltage amplifying stage, a transconductance amplifying stage, and a transimpedance amplifying stage. And to exclude inner nodes with high RC time constant, shunt-shunt negative feedback is introduced in the receiver. A novel active inductor shunt peaking structure is used in the receiver to fulfill the stringent requirements of high speed and wide Common-Mode Input Region (CMIR) without voltage gain, power dissipation and silicon area penalty. Simulation results show that data rates of 2 Gbps and 2.5 Gbps are achieved for the transmitter and receiver with power con- sumption of 13.2 mW and 8.3 mW respectively.
文摘介绍了一种基于LVDS的高速远程图像数据存储系统。系统以FPGA芯片作为控制核心,采用低压差分信号技术(Low voltage differential signaling,LVDS)接口解串和驱动芯片相结合,保证了有效接收远程数据;采用交替双平面的FLASH编程方式来控制图像数据的存储,实现了以28.95MB/s的速度对实时图像数据进行存储的要求。经试验验证和实测证明,该图像数据存储系统性能稳定,数据存储可靠,能满足实际测试要求。
