Production of Low-carbon Light Olefins from Catalytic Cracking of Crude Bio-oil

Low-carbon light olefins are the basic feedstocks for the petrochemical industry. Catalytic cracking of crude bio-oil and its model compounds （including methanol, ethanol, acetic acid, acetone, and phenol） to light olefins were performed by using the La/HZSM-5 catalyst. The highest olefins yield from crude bio-oil reached 0.19 kg/（kg crude bio-oil）. The reaction conditions including temperature, weight hourly space velocity, and addition of La into the HZSM-5 zeolite can be used to control both olefins yield and selectivity. Moderate adjusting the acidity with a suitable ratio between the strong acid and weak acid sites through adding La to the zeolite effectively enhanced the olefins selectivity and improved the catalyst stability. The production of light olefins from crude bio-oil is closely associated with the chemical composition and hydrogen to carbon effective ratios of feedstock. The comparison between the catalytic cracking and pyrolysis of bio-oil was studied. The mechanism of the bio-oil conversion to light olefins was also discussed.

A Probe into Process for Maximization of Low-carbon Olefins via Co-processing of Methanol and Heavy Oil

From the viewpoint of process specifics and thermodynamics, this article has put forward a route for maximiza- tion of low-carbon olefins via co-processing of methanol and heavy oil. Catalytic cracking experiments on co-processing of methanol and heavy oil at different ratios in a fixed fluidized bed reactor had been conducted. Test results have revealed that when 12.5% of methanol was blended to the heavy oil a good products distribution and relatively higher yield of low-carbon olefins could be obtained. The overall yield of low-carbon olefins could reach 50.16%, with the yield of ethylene, propylene and butylene equating to 5.47 %, 28.93% and 15.76 %, respectively.

Thermodynamic Analysis of Formation of Low-carbon Olefins via Coal Gasification Coupling C_1 Reaction

The complex reaction system of the coal gasification coupling C1 reaction was analyzed based on the principles of thermodynamics. The results show that an increase in the temperature is beneficial to the generation of hydrocarbons with high carbon-atom contents, in which the alkane yield is higher than the alkene yield. The complex reaction system consisting of C, H20, CO, CO2, H2, C2H4, C3H6 and C4Hs was studied, and the obtained results indicated that when the maximum mole fraction content of C2-C4 olefins was regarded as the optimized objective function, the optimum temperature was approximately 648 K, the pressure was 0.1 MPa, the feed ratio was approximately 0.6, and the maximum mole fraction content of C2-C4 olefins was approximately 28.24%. The thermodynamic simulation and calculation of the complex reaction system can provide a basis for the determination and optimization of actual process conditions and are therefore of great theoretical and practical significance.

Commercial Demonstration Unit for Manufacture of Aromatics from Toluene and Methanol with Coproduction of Low-Carbon Olefins Will Be Set Up

On November 29,2013 the Shaanxi Coal Chemicals Technology Engineering Center,Ltd.(SCCTEC),the CNOOC Huizhou Refining and Chemical Company and the SINOPEC Luoyang Engineering Company,Ltd.signed an agreement on cooperation in development of

Technology for Manufacture of Xylene from Toluene and Methanol with Coproduction of Low-Carbon Olefins Passed Appraisal

On November 30, 2018 “The technology for manufacture of xylene from toluene and methanol with coproduction of low-carbon olefins” jointly developed by the Yanchang Petroleum Group (YPG) and the CAS Dalian Institute of Chemical Physics (DICP) had passed the appraisal of research achievements. In order to open up a new In order to open up a new technical route for alkylation of toluene to p-xylene, the technical personnel of YPG and DICP have been jointly engaging in the activities for tackling key problems to set up a 10 kt/a commercial unit for producing xylene through reaction of methanol with toluene along with coproduction of low-carbon olefins.

Modeling and analysis of air combustion and steam regeneration in methanol to olefins processes

Light olefins is the incredibly important materials in chemical industry.Methanol to olefins(MTO),which provides a non-oil route for light olefins production,received considerable attention in the past decades.However,the catalyst deactivation is an inevitable feature in MTO processes,and regeneration,therefore,is one of the key steps in industrial MTO processes.Traditionally the MTO catalyst is regenerated by removing the deposited coke via air combustion,which unavoidably transforms coke into carbon dioxide and reduces the carbon utilization efficiency.Recent study shows that the coke species over MTO catalyst can be regenerated via steam,which can promote the light olefins yield as the deactivated coke species can be essentially transferred to industrially useful synthesis gas,is a promising pathway for further MTO processes development.In this work,we modelled and analyzed these two MTO regeneration methods in terms of carbon utilization efficiency and technology economics.As shown,the steam regeneration could achieve a carbon utilization efficiency of 84.31%,compared to 74.74%for air combustion regeneration.The MTO processes using steam regeneration can essentially achieve the near-zero carbon emission.In addition,light olefins production of the MTO processes using steam regeneration is 12.81%higher than that using air combustion regeneration.In this regard,steam regeneration could be considered as a potential yet promising regeneration method for further MTO processes,showing not only great environmental benefits but also competitive economic performance.

Properties and Characterization of Two Clays Raw Material from Mountain District (West of Côte d’Ivoire) for Use in Low-Carbon Cements

This work was devoted to the study of the physico-chemical properties of two clay minerals from the Mountain District (West Côte d'Ivoire) referenced ME1 and ME2. These samples were characterized by the experimental techniques, such as X-ray diffraction (XRD), Infrared spectroscopy (IR), Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES), Differential Thermal Analysis and Thermogravimetry (DTA-TG), Brunauer, Emett and Teller method (BET), laser particle size analysis and Scanning Electron Microscope (SEM). The main results of these analyses reveal that the two clay samples mainly contain quartz (52.91% for ME1 and 51.72% for ME2), kaolinite (36.60% for ME1 and 41.6% for ME2) and associated phases, namely goethite and hematite (13.47% for ME1 and 11.00% for ME2). The specific surface values obtained for samples ME1 and ME2 are 34.78 m2/g and 29.18 m2/g respectively. The results obtained show that the samples studied belong to the kaolinite family. After calcination, they could have good pozzolanic activity and therefore be used in the manufacture of low-carbon cements.

Does China's digital economy contribute to low-carbon transition?

The digital economy,as a new emerging economic form,has become an important power for realizing Chinese-style modernization and promoting green development in China.This paper measures the digital economy and low-carbon transition index based on the data of 30 provinces in China from 2013 to 2020 and analyzes the mechanism and path of the digital economy affecting low-carbon transition using the fixed effect panel data model and the threshold effect model.It is found that,(1)The digital economy and low-carbon transition in China are various in different regions,with characteristics of being unbalanced and insufficient.(2)The digital economy significantly promotes low-carbon transition,with the greatest influence in the Central region,followed by the Eastern region and the Western region.Under different dimensions,the development of informatization and digital transactions promote low-carbon transition,but the development of the internet plays an inhibiting role.(3)The higher the degree of urbanization and environmental regulation,the greater the influence of the digital economy on low-carbon transition.

Effect of ZrC Modified Graphite on Structure and Properties of Low-carbon Al_(2)O_(3)-C Refractories

To address the issues of reduced performance and shortened lifespan during the low-carbonizating process of Al_(2)O_(3)-C refractories,nano-crystalline ZrC modified graphite was prepared using Zr powder and flake graphite as raw materials,with NaCl and NaF mixed salt serving as the medium.The flake graphite was gradually replaced by ZrC modified graphite in the preparation of Al_(2)O_(3)-C refractories,and its impact on the material’s structure and properties was investigated.The results indicate that,compared to samples with only flake graphite,the introduction of 1 mass%to 5 mass%nano-crystalline ZrC modified graphite can significantly enhance the mechanical performance of low-carbon Al_(2)O_(3)-C refractories.When 5 mass%ZrC modified graphite is added,the mechanical properties of the samples are optimal,with the cold modulus of rupture and elastic modulus reaching 22.5 MPa and 65.0 GPa,respectively.

Performance Evaluation of Low-Carbon and Clean Transformation of China’s Coal Economy

In China,the oversupply of coal occurred in 2009,and from that year onwards,China’s coal economy began a low-carbon and clean transformation.Evaluating transformation performance is the research goal of this paper.The data collection for this paper includes data on deep processing of Chinese coal products from 2009 to 2020,as well as data on asset structure evolution and financial performance of 34 listed companies in the Chinese coal mining.Entropy value method is used to calculate the entropy value of low-carbon transformation,and the regression analysis is used to study the performance of cleaner transformation,the conclusion is as follows:(1)From 2009 to 2020,in China’s total energy consumption,coal consumption accounted for 71.6%in 2009 and 56.8%in 2020,the goals set by the state have been achieved.(2)The national goal of reducing the proportion of coal consumption and reducing carbon emissions has forced the transformation of deep processing of coal products.The transformation of coal enterprises towards low-carbon and clean production has achieved remarkable results.(3)From 2009 to 2020,the non coal industry income of 34 listed companies in China’s coal mining industry increased by 8.21%annually.At the same time,the asset structure was adjusted,and nearly 80%of the asset structure evolution showed an orderly development trend.(4)The regression analysis results show that the entropy value of coal deep processing products and the entropy value of asset structure adjustment are significantly related to transformation performance.The paper proposes to summarize the successful experience of China’s coal energy economic transformation,lay a foundation for achieving the carbon peak and carbon neutral goals in the future,further increase the intensity of coal deep processing,increase the proportion of clean energy in total energy consumption,and strive to control asset operation towards the goal of increasing the proportion of non coal industry income.

A Mechanism for Digital Finance to Drive Green and Low-Carbon Development

Given the global focus on green and low-carbon development and the increasing prominence of digital finance,it is particularly important to explore how to leverage digital finance to achieve these environmental goals.This study,through mechanism analysis,deeply examines how China’s digital finance promotes green and low-carbon development and elucidates the positive interaction between digital finance and the green industry.The study found that digital finance,through more flexible and efficient financial functions,alters the cost structure of carbon emissions,and reduces the risks and costs of green investments,thereby creating a cooperative green mechanism benefiting all parties,and guiding social groups toward a green and low-carbon transformation.Additionally,the rapid development of digital finance has strengthened the implementation of environmental protection policies,effectively promoted the expansion of the environmental protection industry,and established the green ethos as a mainstream concept in financial development.This study aims to provide reference perspectives and suggestions,assist policymakers in promoting the green and lowcarbon development of digital finance,and offer insights into the integrated development of digital finance and the green environmental protection industry.

Synthesis and characterization of an unusual snowflake-shaped ZSM-5 zeolite with high catalytic performance in the methanol to olefin reaction

The ZSM-5 zeolite with an unusual snowflake-shaped morphology was hydrothermally synthesized for the first time,and compared with common ellipsoidal and boat-like shaped samples.These samples were characterized by N2 adsorption-desorption,X-ray fluorescence spectroscopy,scanning electron microscopy,X-ray diffraction,magic angle spinning nuclear magnetic resonance,temperature-programmed desorption of ammonia,and infrared spectroscopy of pyridine adsorption.The results suggest that the BET surface area and SiO2/Al2O3 ratio of these samples are similar,while the snowflake-shaped ZSM-5 zeolite possesses more of the（101） face,and distortion,dislocation,and asymmetry in the framework,resulting in a larger number of acid sites than the conventional samples.Catalysts for the methanol to olefin（MTO） reaction were prepared by loading Ca on the samples.The snowflake-shaped Ca/ZSM-5 zeolite exhibited excellent selectivity for total light olefin（72%） and propene（39%） in MTO.The catalytic performance influenced by the morphology can be mainly attributed to the snowflake-shaped ZSM-5 zeolite possessing distortion,dislocation,and asymmetry in the framework,and lower diffusion limitation than the conventional samples.

Effects of zinc on Fe-based catalysts during the synthesis of light olefins from the Fischer-Tropsch process

Fe‐based catalysts for the production of light olefins via the Fischer‐Tropsch synthesis were modi‐fied by adding a Zn promoter using both microwave‐hydrothermal and impregnation methods. The physicochemical properties of the resulting catalysts were determined by scanning electron mi‐croscopy, the Brunauer‐Emmett‐Teller method, X‐ray diffraction, H2 temperature‐programed re‐duction and X‐ray photoelectron spectroscopy. The results demonstrate that the addition of a Zn promoter improves both the light olefin selectivity over the catalyst and the catalyst stability. The catalysts prepared via the impregnation method, which contain greater quantities of surface ZnO, exhibit severe carbon deposition following activity trials. In contrast, those materials synthesized using the microwave‐hydrothermal approach show improved dispersion of Zn and Fe phases and decreased carbon deposition, and so exhibit better CO conversion and stability.

烯式吡虫啉(olefin IMI)光解及其光解产物研究

烟碱类杀虫剂吡虫啉(imidacloprid,IMI)在环境中可代谢为生物活性提高10倍的烯式吡虫啉(olefin IMI)。研究了olefin IMI的光稳定性、光解动力学和光解代谢途径。结果表明:olefin IMI在避光条件下较为稳定,室温下放置400d后,olefin IMI含量仅减少3%;而在室内模拟日光条件下,olefin IMI易于分解,光解反应符合一级动力学方程(r>0.99),半衰期为4d。olefin IMI的光解反应存在2条主要途径:一是羟基化生成4,5-二羟基化吡虫啉,该产物进一步氧化断裂药效基团硝基亚胺基生成羰基化产物;二是直接脱去硝基基团生成胍基产物。

Polymerization Mechanism of α-Linear Olefin

The density functional theory on the level of B3LYP/6-31G was empolyed to study the chain growth mechanism in polymerization process of α-linear olefin in TiCl3/AlEt2Cl catalytic system to synthesize drag reduction agent. Full parameter optimization without symmetry restrictions for reactants, products, the possible transition states, and intermediates was calculated. Vibration frequency was analyzed for all of stagnation points on the potential energy surface at the same theoretical level. The internal reaction coordinate was calculated from the transition states to reactants and products respectively. The results showed as flloes： （i） Coordination compounds were formed on the optimum configuration of TiCl3/AlEt2Cl.（ii） The transition states were formed. The energy di？erence between transition states and the coordination compounds was 40.687 kJ/mol. （iii） Double bond opened and Ti-C（4） bond fractured, and the polymerization was completed. The calculation results also showed that the chain growth mechanism did not essentially change with the increase of carbon atom number of α-linear olefin. From the relationship between polymerization activation energy and carbon atom number of the α-linear olefin, it can be seen that the α-linear olefin monomers with 6-10 carbon atoms had low activation energy and wide range. It was optimum to synthesize drag reduction agent by polymerization.

Approach and Strategy of Constructing Low-carbon Communities

The developing focus of low-carbon society is constructing low-carbon cities which are based on the construction of low-carbon communities.The main ways of constructing low-carbon communities conclude low carbonization of planning and designing,low carbonization of construction materials,low carbonization of community environment,low carbonization of energy system,low carbonization of energy use and low carbonization of life style.The basic strategies of constructing low-carbon communities contain enhancing propaganda and education,strengthening technical innovation,cultivating low-carbon culture,advocating public participation and consolidating leadership in organizations.

Production of Light Olefins from Biosyngas by Two-stage Catalytic Conversion Process via Dimethyl Ether

NiSAPO-34 and NiSAPO-34/HZSM-5 were prepared and evaluated for the performance of dimethyl ether （DME） conversion to light olefins （DTO）. The processes of two-stage light olefin production, DME synthesis and the following DTO, were also investigated using biosyngas as feed gas over Cu/Zn/A1/HZSM-5 and the optimized 2%NiSAPO-34/HZSM- 5. The results indicated that adding 2%Ni to SAPO-34 did not change its topology structure, but resulted in the forming of the moderately strong acidity with decreasing acid amounts, which slightly enhanced DME conversion activity and C2=-C3= selectiw ity. Mechanically mixing 2%NiSAPO-34 with HZSM-5 at the weight ratio of 3.0 further prolonged DME conversion activity to be more than 3 h, which was due to the stable acid sites from HZSM-5. The highest selectivity to light olefins of 90.8% was achieved at 2 h time on stream. The application of the optimized 2%NiSAPO-34/HZSM-5 in the second-stage reactor for DTO reaction showed that the catalytic activity was steady for more than 5 h and light olefin yield was as high as 84.6 g/m3syngas when the biosyngas （H2/CO/CO2/N2/CH4=41.5/26.9/14.2/14.6/2.89, vol%） with low H/C ratio of 1.0 was used as feed gas.

Catalytic epoxidation of olefin over supramolecular compounds of molybdenum oxide clusters and a copper complex

The catalytic epoxidation of olefin was investigated on two copper complex-modified molybdenum oxides with a 3D supramolecular structure, [Cu（bipy）]4[Mo15O47].2H2O （1） and [Cu1（bix）][（Cu1bix） （δ-MoVl8O26）0.5] （2） （bipy = 4,4＇-bipyridine, bix = 1,4-bis（imidazole-1-ylmethyl）benzene）. Both compounds were catalytically active and stable for the epoxidation of cyclooctene, 1-octene, and styrene with tert-butyl hydroperoxide （t-BuOOH） as oxidant. The excellent catalytic performance was attributed to the presence of stable coordination bonds between the molybdenum oxide and copper complex, which resulted in the formation of easily accessible Mo species with high electropositivity. In addition, the copper complex also acted as an active site for the activation of t-BuOOH, thus im- proving these copper complex-modified polyoxometalates.

催化裂化装置多产丙烯助剂Olefins Max的应用试验

对多产丙烯的助剂OlefinsMax进行了小型和中型试验评价 ,并对该助剂在镇海炼油化工股份有限公司3 .0 0Mt/a催化裂化装置的工业应用试验作了总结 ,结果表明通过在主催化剂中配合使用多产丙烯助剂 ,能明显增加丙烯收率 ,在装置生产负荷为 80 %时主催化剂中添加 3 %～ 4%的OlefinsMax助剂 ,使装置每天多生产丙烯 5 0t以上 ,且对汽油质量无不利影响 。

Cultivation and Management of Low-carbon Scenic Spots——A case study of Yuntai Mountain Scenic Area in Henan Provicne of China

After analysis of connotation of low-carbon scenic spots,the paper considered that a perfect low-carbon scenic spot is a comprehensive integrity with satisfying tourists' lowest tourist experience effect as the premise and with low energy consumption,low pollution and low emission as the foundation.Low-carbon tourist scenic spots had been classified into three types which are ecological type,cultural type and coupling type of ecology and culture.Representatives of each type of tourist scenic spot were illustrated.It proposed that government should play the leading role in cultivation of low-carbon scenic spot;tourism industry should enhance self supervision;tourism development mode should be transformed and upgrading of tourist products should be realized.By taking Yuntai Mountain Scenic Area of Henan Province for example,based on low-carbon tourist resources,low-carbon development of management,following measures realizing low-carbon economy were put forward:① purifying air quality and beautifying environment of scenic area;② sifting laggard productivity and protecting ecological resources in the scenic area by many means;③ sticking to low-carbon environmental protection concept and completing infrastructure service;④ developing tourist native products and souvenirs based on local resources;⑤ applying electronic access control ticket system,intelligent monitor system and LED information and communication platform,so as to achieve low-carbon management.