Research on the Impact of Digital Transformation on the Performance of Manufacturing Enterprises

To address the challenges faced by manufacturing enterprises in digital transformation,this paper analyzes the relationship between digital transformation and enterprise performance.Using panel data from domestic A-share-listed manufacturing enterprises from 2012 to 2022,two hypotheses were proposed.The analysis and verification revealed that digital transformation in manufacturing enterprises can enhance performance and reduce costs.Based on the impact of digital transformation on manufacturing enterprise performance,optimization suggestions are proposed to guide future digital transformation and performance improvement efforts in these enterprises.

Analysis of the Impact of Digital Transformation on Non-Financial Performance of Manufacturing Enterprises

As one of the important pillars of China’s national economy,the development of the manufacturing industry has attracted much attention.The manufacturing industry has become a key development area due to its high technology content,capital-intensive,knowledge-intensive,and many more characteristics.With the rapid development of big data information technology,emerging technologies such as artificial intelligence have brought a lot of convenience to people’s lives,and manufacturing enterprises have also realized the importance of reform and innovation,and have begun to carry out digital transformation.Based on the study of the motivation of digital transformation of manufacturing enterprises,this paper explores the transformation path of manufacturing enterprises to meet the needs of social development,and deeply analyzes the impact of digital transformation of manufacturing enterprises on enterprise performance,with a view to improving the unbalanced industrial structure and lagging technological development at the present stage through digital transformation.

Research on the Digital Economy,Technological Innovation,and Transformation and Upgrading of the Manufacturing Industry in Shandong Province

Based on panel data from 16 cities in Shandong Province from 2013 to 2022,and grounded in theoretical analysis,this paper constructs a benchmark regression model,a mediating effect model,and a heterogeneity test for empirical analysis.The results show that:(1)the digital economy has a significant positive effect on promoting the transformation and upgrading of the manufacturing industry in Shandong Province;(2)the digital economy can drive the transformation and upgrading of the manufacturing industry through technological innovation;and(3)the impact of the digital economy on the transformation and upgrading of the manufacturing industry in Shandong Province is evidently heterogeneous.

Performance Evaluation of Low-Carbon and Clean Transformation of China’s Coal Economy

In China,the oversupply of coal occurred in 2009,and from that year onwards,China’s coal economy began a low-carbon and clean transformation.Evaluating transformation performance is the research goal of this paper.The data collection for this paper includes data on deep processing of Chinese coal products from 2009 to 2020,as well as data on asset structure evolution and financial performance of 34 listed companies in the Chinese coal mining.Entropy value method is used to calculate the entropy value of low-carbon transformation,and the regression analysis is used to study the performance of cleaner transformation,the conclusion is as follows:(1)From 2009 to 2020,in China’s total energy consumption,coal consumption accounted for 71.6%in 2009 and 56.8%in 2020,the goals set by the state have been achieved.(2)The national goal of reducing the proportion of coal consumption and reducing carbon emissions has forced the transformation of deep processing of coal products.The transformation of coal enterprises towards low-carbon and clean production has achieved remarkable results.(3)From 2009 to 2020,the non coal industry income of 34 listed companies in China’s coal mining industry increased by 8.21%annually.At the same time,the asset structure was adjusted,and nearly 80%of the asset structure evolution showed an orderly development trend.(4)The regression analysis results show that the entropy value of coal deep processing products and the entropy value of asset structure adjustment are significantly related to transformation performance.The paper proposes to summarize the successful experience of China’s coal energy economic transformation,lay a foundation for achieving the carbon peak and carbon neutral goals in the future,further increase the intensity of coal deep processing,increase the proportion of clean energy in total energy consumption,and strive to control asset operation towards the goal of increasing the proportion of non coal industry income.

Green transformation of manufacturing industry for ecological protection in Jiangsu Province

Under the new normal economy, the manufacturing industry is developing rapidly as the focus of economic development in Jiangsu. Its rapid development has brought great opportunities to our society, but at the same time, great challenges has been brought to the natural environment. The resource consumption and environmental pollution problems have become increasingly prominent. In the face of this situation, we must try every means to reduce pollution and save energy. Therefore, the transition trend of manufacturing industry in the future is bound to take the green economy as the background. Thus, this paper analyzes the drawbacks of the manufacturing industry in Jiangsu province. And the status of traditional manufacturing enterprises and advantages of green manufacturing are analyzed. Then, the paper proposed to explore the practice of green manufacturing mode for the ecological protection, so as to achieve the industrial transformation and upgrading of manufacturing industry in Jiangsu province.

Cogitation on the digital transformation of the process manufacturing industry triggered by the practices of the PIDAS

Digital transformation is the process of an industry moving to a digital business of continuous growth and improvement with digital technologies.It is an important path for the manufacturing industry to reconstruct and upgrade the existing operation mode to achieve efficiency, effectiveness, and product quality improvement.In this study, we analyze why the successful digital transformation practice is scarcely found in the core business of process manufacturing industries, such as the steel and cement industries.By introducing the development and application of the Process Intelligent Data Application System(PIDAS),which is the digital platform of heavy plates in Baosteel, the concepts, ideas, and development experience of the digital transformation of the process manufacturing are summarized.Moreover, the core issues worthy of attention are pointed out.Finally, a feasible route for the digital transformation of the process manufacturing is proposed.

Research on the transformation and upgrading of manufacturing industry based on the Intemet Plus

Along with the development oflntemet plus and information technology, the future industrial pattern will appear new change. The Internet represents a new economic model, and it uses the results of the development of the developed communication technology and the Internet platform with the existing various areas of known and unknown fields of social and economic to integration depth, giving full play to the advantages of integration, enhancing the innovation ability of the economic and the production adaptability, to create more new opportunities, thus forming a sustainable excellent ecosystem.

On the Digital Transformation of the Automobile Manufacturing Industry in the Chengdu-Chongqing Economic Circle:Mechanism of Action and Feasible Paths

With a long industrial chain and a powerful ability to drive other industries,the automobile manufacturing industry has a prominent strategic position in the national economy.In recent years,many countries have put on their agenda the digitalization of the automobile manufacturing industry,leading to an connected,autonomous,shared,and electric(also known as CASE)①development trend in the industry.As one of the six major automobile industry clusters in China,the Chengdu-Chongqing economic circle has achieved initial results in the digital transformation of the automobile manufacturing industry.However,the region is still faced with some constraints,such as insufficient digital infrastructure,relatively slow development of new automobile products,insufficient innovation ability of the automobile industry,and complex digital transformation of small and medium-sized automobile enterprises(automobile SMEs).This paper intends to construct a framework for the mechanism of action of the digital transformation in the automobile manufacturing industry,analyze the effects of the digital transformation of the automobile manufacturing industry in the Chengdu-Chongqing economic circle,and propose feasible paths for the digital transformation of the automobile manufacturing industry in the region by drawing on domestic and international experience in this regard.The specific paths include:(a)Smoothing the“dual-core”data chain to facilitate the digital transformation of the automobile manufacturing industry;(b)Developing the new energy vehicle(NEV)industry to upgrade the quality of automobile products;(c)Achieving corner overtaking in the digital transformation of the automobile manufacturing industry with digital technology;(d)Jointly building the automobile industrial park to promote the digital transformation of the industry;(e)Addressing problems facing automobile SMEs in digital transformation via targeted policy tools.

Industry Linkage and Low-carbon Development--Based on Logistics Industry & Manufacturing Industry

Key project of " manufacturing industry and logistics industry linkage"was proposed in the Logistics Adjustment and Revitalization Plan by the state council in 2009. However the consumption and pollution generated by manufacturing industry and logistics industry linkage in China are also large at present. How to conduct manufacturing industry and logistics industry linkage by the low-carbon manner is one of most important issues under current low-carbon economy background. In this paper,the issue is studied and analyzed by constructing system dynamics model,which could propose suggestions for low-carbon linkage development of manufacturing industry and logistics industry.

Low-carbon transformation of industrial structure in China

The traditional economic growth mode of "three highs and one low(high input, high consumption, high pollution and low effi ciency)" makes China get the achievements of economic development and prosperity during the reform and opening up with more than 30 years, but behind this extensive mode of economic growth is excessive consumption of natural resources and a lot of greenhouse gases emissions, this not only limits the growth rate of China's economy, but makes a tremendous negative impact on the environment which is diffi cult for us to survive. Therefore, realizing industrial structure low-carbon effectively and developing a low-carbon economy characterized by "low-power, low consumption, low pollution and low emissions", become China's new target selection to transform economic development mode and realize the goal of optimization and upgrading of industrial structure and sustainable development.

Practice Teaching Reform of Mechanical Design and Manufacture and Its Automation Specialty under Transformation and Development

With the development of the times, undergraduate colleges and universities begin to transform and develop to adapt to the changing society, and put forward new requirements for practical teaching strategies, especially for applied undergraduate colleges. The reform of practical teaching is particularly important. Under the development of education transformation, the reform of mechanical design and manufacture and the practice teaching of automation specialty also occupy a very important position. Through the understanding of the reform of the practical teaching of this specialty, the effect of the reform is observed, and a reasonable teaching scheme is put forward to promote the steps of the transformation of the practical teaching.

Intermolecular and surface forces in atomic-scale manufacturing

Atomic and close-to-atomic scale manufacturing(ACSM)aims to provide techniques for manufacturing in various fields,such as circuit manufacturing,high energy physics equipment,and medical devices and materials.The realization of atomic scale material manipulation depending on the theoretical system of classical mechanics faces great challenges.Understanding and using intermolecular and surface forces are the basis for better designing of ACSM.Transformation of atoms based on scanning tunneling microscopy or atomic force microscopy(AFM)is an essential process to regulate intermolecular interactions.Self-assemble process is a thermodynamic process involving complex intermolecular forces.The competition of these interaction determines structure assembly and packing geometry.For typical nanomachining processes including AFM nanomachining and chemical mechanical polishing,the coupling of chemistry and stress(tribochemistry)assists in the removal of surface atoms.Furthermore,based on the principle of triboelectrochemistry,we expect a further reduction of the potential barrier,and a potential application in high-efficiency atoms removal and fabricating functional coating.Future fundamental research is proposed for achieving high-efficiency and high-accuracy manufacturing with the aiding of external field.This review highlights the significant contribution of intermolecular and surface forces to ACSM,and may accelerate its progress in the in-depth investigation of fundamentals.

Carbon Emission Modeling and Analysis in Manufacturing Process for Numerical Control Machine Tools

Reducing carbon emissions( CEs) is the urgent demand all over the world. In order to realize the low-carbon numerical control( NC) machining, the evaluation model of a part's manufacturing carbon emission with NC machine tools was built by considering the influences of the cutting tool geometrical parameters.The manufacturing CEs were produced by electric power,cutting tools,and cutting fluid consumed in manufacturing process. The parameters of cutting tools affected not only the CEs,but also the machining quality. Then the actual constraint models of the machine performance,machining quality were given in order to optimize the cutting parameters and achieve the low-CEs. Finally,a case was given to analyze the influences of the cutting tool angles on the manufacturing CEs. The results show that the CEs decrease as the rake angle and edge angle increase under the constraints of the machine specifications and machining quality.

Commercial Demonstration Unit for Manufacture of Aromatics from Toluene and Methanol with Coproduction of Low-Carbon Olefins Will Be Set Up

On November 29,2013 the Shaanxi Coal Chemicals Technology Engineering Center,Ltd.(SCCTEC),the CNOOC Huizhou Refining and Chemical Company and the SINOPEC Luoyang Engineering Company,Ltd.signed an agreement on cooperation in development of

Exploring the “Green” Transformation Planning of Industrial Parks in the Era of Low Carbon Economy

The core function of the low carbon economy is to change the economic development trend of the whole society. It is necessary to carry out industrial transformation and upgrading according to the concept of sustainable development and to realize integrated technological innovation and efficient economic development without violating the law of ecological and environmental development. In the era of the low-carbon economy, industrial parks should solidly promote the green transformation planning process. Relying on the basic logical framework of green transformation of industrial parks, it can build a green development quality evaluation system of industrial parks and formulate a green planning mechanism and green economic cycle development model in line with the background of the low-carbon economy.

Analysis on the development of intelligent manufacturing industry in Shanghai

Intelligent manufacturing is the transformation and upgrading of Chma＇s manutactunng industry, to speeu up me transformation from the manufacturing power to the main direction of manufacturing power, but also to implement the ＂Made in China 2025＂ and ＂lntemet plus＂ strategy to promote the supply side of the manufacturing sector reform, building a global influence of the importatu center of science and technology innovation center. An analysis of the present situation of intelligent manufacturing industry in Shanghai, we can point out the deficiency of its development and point out the direction for the development of the intelligent manufacturing industry in Shanghai.

时空自适应图卷积与Transformer结合的动作识别网络

在一个以人为中心的智能工厂中,感知和理解工人的行为是至关重要的,不同工种类别往往与工作时间和工作内容相关。该文通过结合自适应图和Transformer两种方式使模型更关注骨架的时空信息来提高模型识别的准确率。首先,采用一个自适应的图方法去关注除人体骨架之外的连接关系。进一步,采用Transformer框架去捕捉工人骨架在时间维度上的动态变化信息。为了评估模型性能,制作了智能生产线装配任务中6种典型的工人动作数据集,并进行验证,结果表明所提模型在Top-1精度上与主流动作识别模型相当。最后,在公开的NTURGBD和Skeleton-Kinetics数据集上,将该文模型与一些主流方法进行对比,实验结果表明,所提模型具有良好鲁棒性。

A SYSTEMATIC ARCHITECTURE AND MODELING OF VIRTUAL MANUFACTURING AND MEASURING CELL

The concept of virtual manufacturing and measuring cell (VMMC) is proposed, the systematic architecture of the VMMC is established and two key problems: the error fusion in machining and the reconstructable modeling of workpiece during virtual manufacturing and measuring, are discussed. An actual VMMC is presented as an example and its modularized frame is introduced.

A Novel Digital Image Watermarking Scheme on Copyright Protection Based on Network Manufacture Environment

In this paper,we propose a novel wavelet-domain digital image watermarking scheme on copyright protection based on network manufacture environment.It codes the watermarking with error correcting coding and encrypts the watermarking with chaotic encryption.It embeds the watermarking into the coefficients which have large absolute values in the middle-frequency parts got by Discrete Wavelet Transform (DWT) repeatedly.The extraction doesn’t need the original image.Experiment results show that the proposed scheme is easy to implement,and has good robustness to some attacks,such as JPEG compression,average filtering,median filtering,wiener filtering,pepper (?) salt noise,especially to cropping and scaling.In order to solve the prob- lem of the copyright protection of the network manufacture production,the problems of digital image production such as tamper preventing and watermarking attacks preventing and so on are discussed.It solves the problems of manufacture information such as secure exchange and transmissions and production copyright protection and so on.

Global low-carbon transition and China's response strategies

The Paris Agreement establishes a new mechanism for post-2020 global climate governance, and sets long-term goals for global response to climate change, which will accelerate worldwide low-carbon transformation of economic development pattern, promote the revolutionary reform of energy system, boost a fundamental change in the mode of social production and consumption, and further the civilization of human society from industrial civilization to eco-civilization. The urgency of global low-carbon transition will reshape the competition situation of world's economy, trade and technology. Taking the construction of eco-civilization as a guide, China explores green and low-carbon development paths,establishes ambitious intended nationally determined contribution(INDC) targets and action plans, advances energy production and consumption revolution, and speeds up the transformation of economic development pattern. These strategies and actions not only confirm to the trend of the world low-carbon transition, but also meet the intrinsic requirements for easing the domestic resources and environment constraints and realizing sustainable development. They are multi-win-win strategies for promotion of economic development and environmental protection and mitigation of carbon emissions. China should take the global long-term emission reduction targets as a guide, and formulate medium and long-term low-carbon development strategy, build the core competitiveness of low-carbon advanced technology and development pattern, and take an in-depth part in global governance so as to reflect the responsibility of China as a great power in constructing a community of common destiny for all mankind and addressing global ecological crisis.