Relationship between repeated triaxial test and Hamburg wheel tracking test on asphalt mixtures

Both the repeated triaxial test （RTT） and the Hamburg wheel tracking test （HWTT） are adopted to evaluate the high temperature performance of the stone mastic asphalt （SMA） and the mastic asphalt （MA）. The correlation of the permanent deformations of the MA and the correlation of the deformation developments of the SMA between the two tests are analyzed, respectively. Results show that both the two tests can effectively identify the high temperature performance of mixtures, and the correlation between the final results of the two tests as well as that between the deformation developments of the two tests are excellent with R20.9. In order to further prove the correlation, viscoelastic parameters estimated from the RTT results is used to simulate the rutting development in the HWTT slabs by the finite element method （FEM）. Results indicate that the correlation between the two tests is significant with errors less than 10%. It is suitable to predict the rutting development with the viscoelastic parameters obtained from the RTT.

Subchronic Oral Toxicity Evaluation of Lanthanum： A 90-day, Repeated Dose Study in Rats

Objective The present study was undertaken to evaluate the subchronic toxicity of lanthanum and to determine the no observed adverse effect level（NOAEL）,which is a critical factor in the establishment of an acceptable dietary intake（ADI）.Methods In accordance with the Organization for Economic Co-operation and Development（OECD） testing guidelines,lanthanum nitrate was administered once daily by gavage to Sprague-Dawley（SD） rats at dose levels of 0,1.5,6.0,24.0,and 144.0 mg/kg body weight（BW） per day for 90 days,followed by a recovery period of 4 weeks in the 144.0 mg/kg BW per day and normal control groups.Outcome parameters were mortality,clinical symptoms,body and organ weights,serum chemistry,and food consumption,as well as ophthalmic,urinary,hematologic,and histopathologic indicators.The benchmark dose（BMD） approach was applied to estimate a point of departure for the hazard risk assessment of lanthanum.Results Significant decreases were found in the 144.0 mg/kg BW group in the growth index,including body weight,organ weights,and food consumption.This study suggests that the NOAEL of lanthanum nitrate is 24.0 mg/kg BW per day.Importantly,the 95% lower confidence value of the benchmark dose（BMDL） was estimated as 9.4 mg/kg BW per day in females and 19.3 mg/kg BW per day in males.Conclusion The present subchronic oral exposure toxicity study may provide scientific data for the risk assessment of lanthanum and other rare earth elements（REEs）.

ONE-WAY MULTIVARIATE REPEATED MEASUREMENTS ANALYSIS OF VARIANCE MODEL

The one-way multivariate repeated measurements analysis of variance (1-way MRM ANOVA) model for complete data and the sphericity test are studied.

Experimental study on repeatedly loaded foundation soil strengthened by wraparound geosynthetic reinforcement technique

In the recent past,the potential benefits of wraparound geosynthetic reinforcement technique for constructing the reinforced soil foundations have been reported.This paper presents the experimental study on the behaviour of model strip footing resting on sandy soil bed reinforced with geosynthetic in wraparound and planar forms under monotonic and repeated loadings.The geosynthetic layers were laid according to the reinforcement ratio to minimise the scale effect.It is found that for the same amount of reinforcement material,the wraparound reinforced model resulted in less settlement in comparison to planar reinforced models.The efficiency of wraparound reinforced model increased with the increase in load amplitude and the rate of total cumulative settlement substantially decreased with the increase in number of load cycles.The wraparound reinforced model has shown about 45% lower average total settlement in comparison to unreinforced model,while the double-layer reinforced model has about 41% lower average total settlement at the cost of approximately twice the material and 1.5 times the occupied land width ratio.Moreover,wraparound models have shown much greater stability in comparison to their counterpart models when subjected to incremental repeated loading.

Experimental study on permanent deformation characteristics of coarse-grained soil under repeated dynamic loading

Practical assessment of subgrade settlement induced by train operation requires developing suitable models capable of describing permanent deformation characteristics of subgrade filling under repeated dynamic loading.In this paper,repeated load triaxial tests were performed on coarse-grained soil(CGS),and the axial permanent strain of CGS under different confining pressures and dynamic stress amplitudes was analysed.Permanent deformation behaviors of CGS were categorized based on the variation trend of permanent strain rate with accumulated permanent strain and the shakedown theory.A prediction model of permanent deformation considering stress state and number of load cycles was established,and the ranges of parameters for different types of dynamic behaviors were also divided.The results indicated that the variational trend of permanent strain rate with accumulated permanent strain can be used as a basis for classifying dynamic behaviors of CGS.The stress state(confining pressure and dynamic stress amplitude)has significant effects on the permanent strain rate.The accumulative characteristics of permanent deformation of CGS with the number of load cycles can be described by a power function,and the model parameters can reflect the influence of confining pressure and dynamic stress amplitude.The study’s results could help deepen understanding of the permanent deformation characteristics of CGS.

Subchronic Oral Toxicity Evaluation of Sodium Dehydroacetate: A 90-day Repeated Dose Study in Rats

Objective The present study was undertaken to evaluate the subchronic oral toxicity of sodium dehydroacetate(DHA-Na)and to determine the point of departure(POD),which is a critical factor in the establishment of an acceptable dietary intake.Methods DHA-Na was administered once daily by gavage to Sprague–Dawley rats at dose levels of 0.0,31.0,62.0,and 124.0 mg/kg BW per day for 90 days,followed by a recovery period of 4 weeks in the control and 124.0 mg/kg BW per day groups.The outcome parameters were mortality,clinical observations,body weights,food consumption,hematology and clinical biochemistry,endocrine hormone levels,and ophthalmic,urinary,and histopathologic indicators.The benchmark dose(BMD)approach was applied to estimate the POD.Results Significant decreases were found in the 62.0 and 124.0 mg/kg BW groups in terms of the body weight and food utilization rate,whereas a significant increase was found in the thyroid stimulating hormone levels of the 124.0 mg/kg BW group.Importantly,the 95%lower confidence limit on the BMD of 51.7 mg/kg BW was modeled for a reduction in body weight.Conclusion The repeated-dose study indicated the slight systemic toxicity of DHA-Na at certain levels(62.0 and 124.0 mg/kg BW)after a 90-day oral exposure.

Effect of Tire Repeated Root Modal on Tire Modelling with Experimental Modal

The effect of tire repeated root modal（RRM）on tire modeling with an experimental modal is studied.Firstly,a radial tire with radial and tangential RRMs is tested and analyzed.By multi-point exciting of the radial tire,a multiple reference frequency domain method based on a least squares（LMS PolyMAX）algorithm is used to identify modal parameters.Then,modal stability diagram（MSD）,modal indication function（MIF）and modal assurance criteria（Auto-MAC）matrix are utilized to induce multiple inputs multiple outputs（MIMO）frequency response function（FRF）matrixes.The tests reveal that notable repeated roots exist in both radial and tangential response modes.Their modal frequencies and damping factors are approximately the same,the amplitudes of modal vectors are in the same order of magnitude,and the mode shapes are orthogonal.Based on the works mentioned,the method of trigonometric series modal shapes fitting is adopted,the effects of RRM model on tire modeling with a vertical experimental modal are discussed.The final results show that the effects of considering the RRM shapes are equivalent to the tire mode shapes depended on rotating the tire’s different exciting points during tire modeling,and since considering the RRM,the tire mode shapes can be unified and fixed during tire modeling.

Photosynthesis of Digitaria ciliaris during repeated soil drought and rewatering

The ability of psammophyte photosynthesis to withstand and recover from severe droughts is crucial for vegetation sta- bility in semi-arid sandy lands. The responses of gas exchange and chlorophyll fluorescence of an annual grass, Digitaria ciliaris, were measured through three soil drought and rewatering cycles. Results showed that the net photosynthesis rate （P,） decreased by 92%, 95%, and 63% at end of the three drought periods, respectively, water use efficiency （WUE） decreased by 67%, 54%, and 48%, while the constant intercellular CO2 concentration （Ci） increased by 1.08, 0.88, and 0.45 times. During those three cycles, the trapping probability with no dark adaptation （Fv＇/Fm＇） decreased by 55%, 51%, and 9%, the electron transport per cross section （ET0＇/CS0＇） decreased by 63%0, 42%, and 18%, and the dissipation per cross section （DI0＇/CS0＇） increased by 97%, 96%, and 21%. These results indicated that D. ciliaris was subjected to photoinhi- bition and some non-stomatal limitation of photosynthesis under drought. However, after four days of rewatering, its photosynthetic characteristics were restored to control values. This capability to recover from drought may contribute to making the plant＇s use of water as efficient as possible. Furthermore, the photosynthesis decreased more slowly in the subsequent drought cycles than in the first cycle, allowing D. ciliaris to enhance its future drought tolerance after drought hardening. Thus, it acclimatizes itself to repeated soil drought.

Evaluation Test Research of DR Inspection System for Circumferential Welds in Long Distance Pipeline

Digital radiographic(DR)testing equipment has been widely promoted and applied in the inspection of circumferential welds in oil and gas pipelines.In order to establish a comprehensive quality control system for digital radiographic testing and fully evaluate the integrated system inspection ability of equipment,personnel,and processes,a scientific and standardized evaluation method to the system is very necessary.Here investigates the precedents of relevant non-destructive testing evaluation methods at home and abroad,considers the testing characteristics of DR equipment,develops a complete set of DR testing system evaluation procedures.It deeply studies the adaptability methods of program processes from defect production to slicing processing and data statistical calculation for digital radiographic testing evaluation.To check the repeatability and reliability of the detectable system,five process welds with 200 real metallographic defects were fabricated in the laboratory.From the detected results,the DR system has good repeatability in image quality,and the detectable defect size reaches 0.85 mm under achieving 90%detection probability at a confidence level of 95%,the error of detected defect length is±2 mm,and the error of detected defect localization is±5 mm.The qualitative and quantitative detection of defects are accurate and reliable.The test further confirmed the reliable detection ability of the DR detection system,and fully validated the scientific and practical evaluation method designed.The research on the evaluation test method can serve as an important link in the quality control system for the on-site application of digital ray equipment in long-distance pipelines.The designed program,test,and evaluation content can serve as an important basis for the formulation of relevant specifications or standards.

Autoacuity Test与标准对数视力表用于儿童视力测定的比较

【目的】比较一种计算机视力测试软件Autoacuity Test和标准对数视力表之间的一致性和重复性,初步探讨Autoacuity Test临床应用的可行性。【方法】对41名视功能正常儿童[(8.4±1.8)岁]和25名弱视儿童[(8.0±2.2)岁]分别使用标准对数视力表和Autoacuity Test两种方法进行视力测试。30min后重新对其进行测试。以Autoacuity Test与标准对数视力表检查结果的一致性限度的评价其准确性,以测试-再测试的重复系数及配对t检验评价其重复性。【结果】视功能正常儿童的Autoacuity Test与标准对数视力间的一致性限度为0.16对数单位;弱视儿童为0.31对数单位。正常儿童两种方法各自的测试-再测试结果间差异均无统计学意义(P>0.05)。弱视儿童标准对数视力表测试-再测试结果间差异无统计学意义,Autoacuity再次测试视力检查结果较初次测试有所提高(P<0.05)。【结论】Autoacuity Test与标准对数视力表两种检查方法在视功能正常儿童中一致性较好,在弱视儿童中一致性稍差,两者重复性相近。Autoacuity是一种可取的儿童视力测试方法。

Clinical application of the endometrial microbiota test combined with personalized treatment in patients with repeated implantation failure

Objective:The objective of this study was to investigate the clinical value of the endometrial microbiota test(EMT)combined with personalized treatment in patients with repeated implantation failure(RIF).Methods:From March 2019 to August 2022,the clinical data of patients with RIF at the Reproductive Medicine Research Center of the Sixth Affiliated Hospital of Sun Yat-sen University were retrospectively analyzed.A total of 356 patients underwent the EMT using 16S rRNA sequencing and were included in the EMT group.The SPSS statistical software propensity score was set at 1:1 to match the age,anti-Müllerian hormone(AMH),antral follicle count(AFC),years of infertility,and body mass index(BMI)of the women who had not undergone the EMT;subsequently,354 patients were classified in the non-EMT group.We compared the clinical characteristics of the two groups and analyzed the clinical pregnancy outcomes after personalized treatment.Results:The clinical pregnancy rate(CPR)of the EMT group was significantly higher than that of the non-EMT group(47.81%vs.13.38%,P<0.05).Among 356 patients who underwent the EMT,55 patients(15.45%)in group A with normal endometrial microbiota composition did not test positive for the pathogenic bacteria causing chronic endometritis,34 patients(9.55%)in group B with abnormal endometrial microbiota composition did not test positive for the pathogenic bacteria causing chronic endometritis,35 patients(9.83%)in group C with normal endometrial microbiota composition tested positive for the pathogenic bacteria causing chronic endometritis,and 232 patients(65.17%)in group D with abnormal endometrial microbiota composition tested positive for the pathogenic bacteria causing chronic endometritis.After administration of probiotics or antibiotic plus probiotics treatment,the pregnancy rates of groups C and D were higher than those of group A(44.00%vs.20.00%and 55.03%vs.20.00%,respectively;bothP<0.05).Conclusion:The EMT combined with personalized treatment in patients with RIF has solid clinical value as a new treatment strategy.

Construction of EST-SSR Databases for Effective Cultivar Identification and Their Applicability to Complement for Lettuce (Lactuca sativa L.) Distinctness Test

The objectives of this study were to construct a database of expressed sequence tag (EST)-simple sequence repeat (SSR) markers to identify lettuce cultivars. A set of 370 EST-SSR primer pairs were applied for fingerprinting the lettuce cultivars. Fifty-eight EST-SSR markers showed hy-per-variability and were able to differentiate 92 cultivars. A total of 176 polymorphic amplified fragments were obtained by the 58 markers, and two to eight SSR alleles were detected for each l&degCus with an average of three alleles per locus. Average polymorphism information content (PIC) was 0.425, ranging from 0.022 to 0.743. Cluster analysis was based on Jaccard’s distance coefficients using the method of unweighted pair group. In this method we used arithmetical averages (UPGMA) algorithm categorized 4 major groups, which were in accordance to morphological traits. The eight cultivars of three groups with 100% genetic similarity through SSR analysis were investigated by phenotypic traits. These cultivars including these pairs are very similar in 27 morphological characteristics. Therefore, these EST-SSR markers could be used to select similar cultivars through management of reference collection to complement distinctiveness test of lettuce cultivars.

Crushed rocks stabilized with organosilane and lignosulfonate in pavement unbound layers:Repeated load triaxial tests

The creation of the new“Ferry-Free Coastal Highway Route E39”in southwest Norway entails the production of a remarkable quantity of crushed rocks.These resources could be beneficially employed as aggregates in the unbound courses of the highway itself or other road pavements present nearby.Two innovative stabilizing agents,organosilane and lignosulfonate,can significantly enhance the key properties,namely,resilient modulus and resistance against permanent deformation,of the aggregates that are excessively weak in their natural state.The beneficial effect offered by the additives was thoroughly evaluated by performing repeated load triaxial tests.The study adopted the most common numerical models to describe these two key mechanical properties.The increase in the resilient modulus and reduction in the accumulated vertical permanent deformation show the beneficial impact of the additives.Furthermore,a finite element model was created to simulate the repeated load triaxial test by implementing nonlinear elastic and plastic constitutive relationships.

应用于食品检测领域的分子即时检测技术研究进展

食品安全问题关系人类民生。为有效预防和控制食品安全风险,减少食品安全经济损失,迫切需要开发出针对食源性病原体、食物掺假、转基因作物的高特异性、高敏感性、快速的核酸检测技术。即时检测(point-of-care testing,POCT)作为一种新兴的快速检测手段,由于其检测速度快、操作简单、现场检查等特点,在食品检测领域应用广泛。本文首先介绍了POCT技术的发展历史,而后根据食品安全事件的特点,从食源性致病菌、食物掺假、转基因作物3个方向分析了食品检测的主要对象,阐述了分子POCT技术在食品检测领域的应用现状,最后对应用于食品检测领域的分子POCT技术存在的问题和解决办法进行了分析总结,对食品检测分子POCT技术的发展方向进行了展望。本文有助于进一步了解分子POCT技术在食品检测中的应用,并为分子POCT技术在食品快速检测中的研究和应用提供参考。

重复注气压降法煤层渗透率模型与原位测试研究

煤层渗透率作为衡量瓦斯渗流与抽采难易程度的重要指标,对其进行准确测定具有重要意义。针对现有方法计算渗透率测试周期长、结果不稳定、模型不完善等问题,研究煤层渗透率的快速准确测定方法及相应的计算模型。基于煤层中气体径向不稳定流控制方程,结合不同压差下气体在煤层中的体积流量方程,建立可利用全区间压降数据测定煤层渗透率的注气压降计算模型。应用COMSOL数值模拟软件的达西渗流模块对模型进行求解,针对现场工程设计中可对压降曲线产生影响的测压气室长度进行单变量处理,根据模拟结果分析钻孔的测压气室长度可设计为2.0 m。根据数值模拟结果进行现场布置,搭建井下重复注气压降试验系统,结合煤层瓦斯赋存条件和巷道条件施工两组穿层钻孔,对2个测点分别注入两次高于煤层瓦斯压力的补偿气体进行渗透率原位测试,测试周期分别约为6 d和17 d,第2轮测试的注气压力高于第1轮。结合理论推导验证了注气压降过程中煤层瓦斯的雷诺数均处于线性达西渗流段,瓦斯在煤层中的渗流符合达西定律,满足计算模型的假设。与传统煤层渗透率计算方法进行了比较,结果表明:本方法和径向流量法的计算结果基本一致,可以满足实际工程需要。重复注气压降法的测试结果稳定可靠,具备快速测定的优点。

子宫内膜种植窗检测结合个体化胚胎移植对反复种植失败患者的临床应用分析

目的:探讨子宫内膜种植窗检测(ERT)结合个体化胚胎移植(ET)改善反复种植失败患者的妊娠结局有效性。方法:回顾性分析2019年3月至2022年8月于中山大学附属第六医院生殖医学中心诊断为反复种植失败患者的临床资料,行ERT的428例作为ERT组,运用SPSS 26.0软件的倾向性评分匹配分析选择不行ERT的396例为对照组。比较两组的临床特征和妊娠结局,并比较子宫内膜种植窗(WOI)正常、延迟1 d、延迟2 d患者个体化ET后的妊娠结局。结果:ERT组临床妊娠率(47.73%vs.12.79%)和活产率(38.97%vs.9.76%)显著高于对照组,差异有统计学意义(P<0.05);并且ERT组的不孕因素中子宫内膜异位症(EMT)和多囊卵巢综合征(PCOS)因素占比较对照组高(P<0.05)。428例行ERT患者中发现有316例(73.83%)为WOI正常,有112例(26.17%)为WOI移位。WOI正常、WOI延迟1 d和WOI延迟2 d患者妊娠结局间差异无统计学意义(P>0.05)。结论:ERT技术结合个体化移植方案可以改善反复种植失败患者助孕结局,尤其是WOI移位患者,ERT技术具有应用前景和临床应用价值。

圆钢管型钢再生混凝土组合柱水平承载力计算方法研究

通过对11个圆钢管型钢再生混凝土组合柱进行低周反复荷载试验,分析再生粗骨料取代率、型钢截面形式、轴压比、型钢配钢率及圆钢管壁厚参数对组合柱水平承载力的影响规律;观察了组合柱的破坏形态及特征,研究了圆钢管、型钢翼缘及腹板应变的发展规律,分析了组合柱的地震破坏特征。研究表明,在水平地震作用下组合柱发生典型的压弯塑性铰破坏。在此基础上,结合现有规范提出了基于叠加原理的圆钢管型钢再生混凝土组合柱水平承载力计算方法。计算结果表明,其水平承载力计算值与试验值吻合度较好,能较为准确地预测组合柱的水平承载力。