Long-release-interval-first real-time scheduling algorithm and its schedulability test

To fulfill the requirements for hybrid real-time system scheduling, a long-release-interval-first （LRIF） real-time scheduling algorithm is proposed. The algorithm adopts both the fixed priority and the dynamic priority to assign priorities for tasks. By assigning higher priorities to the aperiodic soft real-time jobs with longer release intervals, it guarantees the executions for periodic hard real-time tasks and further probabilistically guarantees the executions for aperiodic soft real-time tasks. The schedulability test approach for the LRIF algorithm is presented. The implementation issues of the LRIF algorithm are also discussed. Simulation result shows that LRIF obtains better schedulable performance than the maximum urgency first （MUF） algorithm, the earliest deadline first （EDF） algorithm and EDF for hybrid tasks. LRIF has great capability to schedule both periodic hard real-time and aperiodic soft real-time tasks.

Real-time scheduling strategy for microgrids considering operation interval division of DGs and batteries

Real-time scheduling as an on-line optimization process must output dispatch results in real time. However, the calculation time required and the economy have a trade-off relationship. In response to a real-time scheduling problem, this paper proposes a real-time scheduling strategy considering the operation interval division of distributed generators(DGs) and batteries in the microgrid. Rolling scheduling models, including day-ahead scheduling and hours-ahead scheduling, are established, where the latter considers the future state-of-charge deviations. For the real-time scheduling, the output powers of the DGs are divided into two intervals based on the ability to track the day-ahead and hours-ahead schedules. The day-ahead and hours-ahead scheduling ensure the economy, whereas the real-time scheduling overcomes the timeconsumption problem. Finally, a grid-connected microgrid example is studied, and the simulation results demonstrate the effectiveness of the proposed strategy in terms of economic and real-time requirements.

SWARM INTELLIGENCE BASED DYNAMIC REAL-TIME SCHEDULING APPROACH FOR SEMICONDUCTOR WAFER FAB

Based on the analysis of collective activities of ant colonies, the typicalexample of swarm intelligence, a new approach to construct swarm intelligence basedmulti-agent-system (SMAS) for dynamic real-time scheduling for semiconductor wafer fab is proposed.The relevant algorithm, pheromone-based dynamic real-time scheduling algorithm (PBDR), is given.MIMAC test bed data set mini-fab is used to compare PBDR with FIFO (first in first out),SRPT(shortest remaining processing time) and CR(critical ratio) under three different release rules,i.e. deterministic rule, Poisson rule and CONWIP (constant WIP). It is shown that PBDR is prior toFIFO, SRPT and CR with better performance of cycle time, throughput, and on-time delivery,especially for on-time delivery performance.

A Model Predictive Scheduling Algorithm inReal-Time Control Systems

Abstract-The ineffective utilization of power resources has attracted much attention in current years. This paper proposes a real-time distributed load scheduling algorithm considering constraints of power supply. Firstly, an objective function is designed based on the constraint, and a base load forecasting model is established when aggregating renewable generation and non-deferrable load into a power system, which aims to transform the problem of deferrable loads scheduling into a distributed optimal control problem. Then, to optimize the objective function, a real-time scheduling algorithm is presented to solve the proposed control problem. At every time step, the purpose is to minimize the variance of differences between power supply and aggregate load, which can thus ensure the effective utilization of power resources. Finally, simulation examples are provided to illustrate the effectiveness of the proposed algorithm.

Application of predictive control scheduling method to real-time periodic control tasks overrun

Based on the abort strategy of fixed periods, a novel predictive control scheduling methodology was proposed to efficiently solve overrun problems. By applying the latest control value in the prediction sequences to the control objective, the new strategy was expected to optimize the control system for better performance and yet guarantee the schedulability of all tasks under overrun. The schedulability of the real-time systems with p-period overruns was analyzed, and the corresponding stability criteria was given as well. The simulation results show that the new approach can improve the performance of control system compared to that of conventional abort strategy, it can reduce the overshoot and adjust time as well as ensure the schedulability and stability.

FEL-H Robust Control Real-Time Scheduling

The existing scheduling algorithms cannot adequately support modern embedded real-time applications. An important challenge for future research is how to model and introduce control mechanisms to real-time systems to improve real-time performance, and to allow the system to adapt to changes in the environment, the workload, or to changes in the system architecture due to failures. In this paper, we pursue this goal by formulating and simulating new real-time scheduling models that enable us to easily analyse feedback scheduling with various constraints, overload and disturbance, and by designing a robust, adaptive scheduler that responds gracefully to overload with robust H∞ and feedback error learning control.

Broadcast Scheduling Strategy Based on the Priority of Real-Time Data in a Mobile Environment

Data broadcast is an important data dissemination approach in mobile environment. On broadcast channel, scalability and efficiency of data transmission are satisfied. In a mobile environment, there exists a kind of real-time database application in which both the transactions and data can have their timing constraints and priorities of different levels. In order to meet the requirement of real-time data disseminating and retrieving, a broadcast scheduling strategy HPF-ED F (Highest Priority First with Earlier Deadline and Frequency) is proposed under the BoD (Broadcast on Demand) model. Using the strategy, data items are scheduled according to their priority the transaction imposed on them or system set for them. The strategy also considers other characteristics of data items such as deadline and popularity of data. The extensive simulation experiments have been conducted to evaluate the performance of the proposed algorithm. Results show that it can achieve excellent performance compared with existing strategies.

SET-MRTS:An Empirical Experiment Tool for Real-Time Scheduling and Synchronization

In the real-time scheduling theory,schedulability and synchronization analyses are used to evaluate scheduling algorithms and real-time locking protocols,respectively,and the empirical synthesis experiment is one of the major methods to compare the performance of such analyses.However,since many sophisticated techniques have been adopted to improve the analytical accuracy,the implementation of such analyses and experiments is often time-consuming.This paper proposes a schedulability experiment toolkit for multiprocessor real-time systems(SET-MRTS),which provides a framework with infrastructures to implement the schedulability and synchronization analyses and the deployment of empirical synthesis experiments.Besides,with well-designed peripheral components for the input and output,experiments can be conducted easily and flexibly on SET-MRTS.This demonstration further proves the effectiveness of SET-MRTS in both functionality and availability.

An Adaptive Genetic Algorithm for Multiprocessor Real-time Task Scheduling

Real-time task scheduling is of primary significance in multiprocessor systems.Meeting deadlines and achieving high system utilization are the two main objectives of task scheduling in such systems.In this paper,we represent those two goals as the minimization of the average response time and the average task laxity.To achieve this,we propose a genetic-based algorithm with problem-specific and efficient genetic operators.Adaptive control parameters are also employed in our work to improve the genetic algorithms' efficiency.The simulation results show that our proposed algorithm outperforms its counterpart considerably by up to 36% and 35% in terms of the average response time and the average task laxity,respectively.

Energy-Efficient Deterministic Fault-Tolerant Scheduling for Embedded Real-Time Systems

By combining fault-tolerance with power management, this paper developed a new method for aperiodic task set for the problem of task scheduling and voltage allocation in embedded real-time systems. The scbedulability of the system was analyzed through checkpointing and the energy saving was considered via dynamic voltage and frequency scaling. Simulation results showed that the proposed algorithm had better performance compared with the existing voltage allocation techniques. The proposed technique saves 51.5% energy over FT-Only and 19.9% over FT ＋ EC on average. Therefore, the proposed method was more appropriate for aperiodic tasks in embedded real-time systems.

Packet Scheduling Algorithm for Real-Time Services in Broadband WMAN

Packet scheduling algorithm is the key technology to guarantee Quality of Service (QoS) and balance the fairness between users in broadband Wireless Metropolitan Area Network (WMAN). Based on the research of Proportional Fairness (PF) algorithm and Modified Largest Weighted Delay First (M-LWDF) algorithm, a new packet scheduling algorithm for real-time services in broadband WMAN, called Enhanced M-LWDF (EM-LWDF), was proposed. The algorithm phases in new information to measure the load of service queues and updates the state parameters in real-time way, which remarkably improves system performance.Simulation results show that comparing with M-LWDF algorithm, the proposed algorithm is advantageous in performances of queuing delay and fairness while guaranteeing system throughput.

An On-Line Scheduler over Hard Real-Time Communication System

By thorough research on the prominent periodic and aperiodic scheduling algorithms,anon-line hard real-time scheduler is presented,which is applicable to the scheduling of packets over a link.This scheduler,based on both Rate Monotonic,pinwheel scheduling algorithm Sr and Polling Serverscheduling algorithms,can rapidly judge the schedulability and then automatically generate a bus tablefor the scheduling algorithm to schedule the packets as the periodic packets.The implementation of thescheduler is simple and easy to use,and it is effective for the utilization of bus link.The orderly executionof the bus table can not only guarantee the performance of the hard real time but also avoid the blockageand interruption of the message transmission.So the scheduler perfectly meets the demand of hard real-time communication system on the field bus domain.

Joint Algorithm of Message Fragmentation and No-Wait Scheduling for Time-Sensitive Networks

Time-sensitive networks(TSNs)support not only traditional best-effort communications but also deterministic communications,which send each packet at a deterministic time so that the data transmissions of networked control systems can be precisely scheduled to guarantee hard real-time constraints.No-wait scheduling is suitable for such TSNs and generates the schedules of deterministic communications with the minimal network resources so that all of the remaining resources can be used to improve the throughput of best-effort communications.However,due to inappropriate message fragmentation,the realtime performance of no-wait scheduling algorithms is reduced.Therefore,in this paper,joint algorithms of message fragmentation and no-wait scheduling are proposed.First,a specification for the joint problem based on optimization modulo theories is proposed so that off-the-shelf solvers can be used to find optimal solutions.Second,to improve the scalability of our algorithm,the worst-case delay of messages is analyzed,and then,based on the analysis,a heuristic algorithm is proposed to construct low-delay schedules.Finally,we conduct extensive test cases to evaluate our proposed algorithms.The evaluation results indicate that,compared to existing algorithms,the proposed joint algorithm improves schedulability by up to 50%.

Construction Simulation and Real-Time Control for High Arch Dam

A method of combining dynamic simulation with real-time control was proposed to fit the randomness and uncertainty in the high arch dam construction process. The mathematical logic model of high arch dam construction process was established. By combining dynamic construction simulation with schedule analysis, the process of construction schedule forecasting and analysis based on dynamic simulation was studied. The process of real-time schedule control was constructed and some measures for dynamic adjustment and control of construction schedule were provided. A system developed with the method is utilized in a being constructed hydroelectric project located at the Yellow River in northwest China, which can make the pouring plan of the dam in the next stage (a month, quarter or year) to guide the practical construction. The application result shows that the system provides an effective technical support for the construction and management of the dam.

Application of the asynchronous advantage actor–critic machine learning algorithm to real-time accelerator tuning

This paper describes a real-time beam tuning method with an improved asynchronous advantage actor–critic(A3C)algorithm for accelerator systems.The operating parameters of devices are usually inconsistent with the predictions of physical designs because of errors in mechanical matching and installation.Therefore,parameter optimization methods such as pointwise scanning,evolutionary algorithms(EAs),and robust conjugate direction search are widely used in beam tuning to compensate for this inconsistency.However,it is difficult for them to deal with a large number of discrete local optima.The A3C algorithm,which has been applied in the automated control field,provides an approach for improving multi-dimensional optimization.The A3C algorithm is introduced and improved for the real-time beam tuning code for accelerators.Experiments in which optimization is achieved by using pointwise scanning,the genetic algorithm(one kind of EAs),and the A3C-algorithm are conducted and compared to optimize the currents of four steering magnets and two solenoids in the low-energy beam transport section(LEBT)of the Xi’an Proton Application Facility.Optimal currents are determined when the highest transmission of a radio frequency quadrupole(RFQ)accelerator downstream of the LEBT is achieved.The optimal work points of the tuned accelerator were obtained with currents of 0 A,0 A,0 A,and 0.1 A,for the four steering magnets,and 107 A and 96 A for the two solenoids.Furthermore,the highest transmission of the RFQ was 91.2%.Meanwhile,the lower time required for the optimization with the A3C algorithm was successfully verified.Optimization with the A3C algorithm consumed 42%and 78%less time than pointwise scanning with random initialization and pre-trained initialization of weights,respectively.

Confidentiality-aware message scheduling for security-critical wireless networks

Without considering security, existing message scheduling mechanisms may expose critical messages to malicious threats like confidentiality attacks. Incorporating confidentiality improvement into message scheduling, this paper investigates the problem of scheduling aperiodc messages with time-critical and security-critical requirements. A risk-based security profit model is built to quantify the security quality of messages; and a dynamic programming based approximation algorithm is proposed to schedule aperiodic messages with guaranteed security performance. Experimental results illustrate the efficiency and effectiveness of the proposed algorithm.

Reservation-based feedback scheduling of MPC tasks

A reservation-based feedback scheduling （FS-CBS） of a set of model predictive control （MPC） tasks is presented to optimize the global control performance subject to limited computational resource. Implemented as anytime algorithm, MPC task allows computation time to be traded for control performance. Each MPC task is assigned with a constant bandwidth server （CBS）, whose reserved processor time is adjusted dynamically. The FS-CBS is shown robust against the varying of execution time of MPC tasks at runtime. Simulation results illustrate its effectiveness.

An integrated DBP for streams with （m, k）-firm real-time guarantee

(m, k)-firm real-time or weakly hard real-time (WHRT) guarantee is becoming attractive as it closes the gap between hard and soft (or probabilistic) real-time guarantee, and enables finer granularity of real-time QoS through adjusting m and k. For multiple streams with (m, k)-firm constraint sharing a single server, an on-line priority assignment policy based on the most recent k-length history of each stream called distance based priority (DBP) has been proposed to assign priority.In case of priority equality among these head-of-queue instances, Earliest Deadline First (EDF) is used. Under the context of WHRT schedule theory, DBP is the most popular, gets much attention and has many applications due to its straightforward priority assignment policy and easy implementation. However, DBP combined with EDF cannot always provide good performance, mainly because the initial DBP does not underline the rich information on deadline met/missed distribution,specially streams in various failure states which will travel different distances to restore success states. Considering how to effectively restore the success state of each individual stream from a failure state, an integrated DBP utilizing deadline met/missed distribution is proposed in this paper. Simulation results validated the performance improvement of this pro-posal.

A State-of-the-Art Survey on Real-Time Issues in Embedded Systems Virtualization

Virtualization has gained great acceptance in the server and cloud computing arena. In recent years, it has also been widely applied to real-time embedded systems with stringent timing constraints. We present a comprehensive survey on real-time issues in virtualization for embedded systems, covering popular virtualization systems including KVM, Xen, L4 and others.

Schedulability analysis for linear transactions under fixed priority hybrid scheduling

In hard real-time systems, schedulability analysis is not only one of the important means of guaranteeing the timelines of embedded software but also one of the fundamental theories of applying other new techniques, such as energy savings and fault tolerance. However, most of the existing schedulability analysis methods assume that schedulers use preemptive scheduling or non-preemptive scheduling. In this paper, we present a schedulability analysis method, i.e., the worst-case hybrid scheduling (WCHS) algorithm, which considers the influence of release jitters of transactions and extends schedulability analysis theory to timing analysis of linear transactions under fixed priority hybrid scheduling. To the best of our knowledge, this method is the first one on timing analysis of linear transactions under hybrid scheduling. An example is employed to demonstrate the use of this method. Experiments show that this method has lower computational complexity while keeping correctness, and that hybrid scheduling has little influence on the average worst-case response time (WCRT), but a negative impact on the schedulability of systems.