Cloud and precipitation interference by strong low-frequency sound wave

Acoustic interference of atmosphere has been an attractive research area because of its potential effect on environment,water resources,ecology,agriculture,and other areas.However,it is also a controversial topic because of the difficulty of quantitative assessment and high operating costs.In this study,a novel acoustic interference technology is proposed that uses strong lowfrequency sound waves.There is no chemical pollution or dependence on airborne vehicles,and it can be remotely controlled at low cost.A complete equipment system for acoustic atmospheric interference technology is established,based on which a series of experimental studies on cloud and precipitation response under acoustic action are performed,mainly including the radar echo intensity,cloud microphysical characteristics and the spatial distribution of ground rainfall intensity.The trigger and periodic effect of the acoustic waves on the cloud are proposed to be the key responses of acoustic atmospheric interference.This study is important to further research on atmosphere interference technology based on low frequency strong sound waves.

Low-frequency bandgap and vibration suppression mechanism of a novel square hierarchical honeycomb metamaterial

The suppression of low-frequency vibration and noise has always been an important issue in a wide range of engineering applications.To address this concern,a novel square hierarchical honeycomb metamaterial capable of reducing low-frequency noise has been developed.By combining Bloch’s theorem with the finite element method,the band structure is calculated.Numerical results indicate that this metamaterial can produce multiple low-frequency bandgaps within 500 Hz,with a bandgap ratio exceeding 50%.The first bandgap spans from 169.57 Hz to 216.42 Hz.To reveal the formation mechanism of the bandgap,a vibrational mode analysis is performed.Numerical analysis demonstrates that the bandgap is attributed to the suppression of elastic wave propagation by the vibrations of the structure’s two protruding corners and overall expansion vibrations.Additionally,detailed parametric analyses are conducted to investigate the effect ofθ,i.e.,the angle between the protruding corner of the structure and the horizontal direction,on the band structures and the total effective bandgap width.It is found that reducingθis conducive to obtaining lower frequency bandgaps.The propagation characteristics of elastic waves in the structure are explored by the group velocity,phase velocity,and wave propagation direction.Finally,the transmission characteristics of a finite periodic structure are investigated experimentally.The results indicate significant acceleration amplitude attenuation within the bandgap range,confirming the structure’s excellent low-frequency vibration suppression capability.

Experiment on low-frequency electromagnetic waves propagating in shock-tube-generated magnetized cylindrical enveloping plasma

We propose a method of applying a static magnetic field to reduce the attenuation of the magnetic field component(SH) of low-frequency electromagnetic(LF EM) waves in dense plasma. The principle of this method is to apply a static magnetic field to limit electron movement, thereby increasing the equivalent resistance and thus reducing the induced current and SH. We consider the static magnetic field acting on the plasma of the entire induced current loop rather than on the local plasma, where the induced current is excited by the magnetic field component of LF EM waves. Analytical expressions of SH suitable for magnetized cylindrical enveloping plasma are derived by adopting an equivalent circuit approach, by which SHis calculated with respect to various plasma parameter settings. The results show that SH can be reduced under a static magnetic field and the maximum magnetic field strength that mitigates blackout is less than 0.1 T. Experiments in which LF EM waves propagate in a shock-tubegenerated magnetized cylindrical enveloping plasma are also conducted. SH measured under the magnetic field(the magnetic field strength B0 acting on the magnetic field probe was about0.06 T) reduces at f=10 MHz and f=30 MHz when ne≈1.9×1013 cm-3, which is consistent with theoretical results. The verification of the theory thus suggests that applying a static magnetic field with a weak magnetic field has the potential to improve the transmission capacity of LF EM waves in dense plasma.

Analysis of Second-Harmonic Generation of Low-Frequency Dilatational Lamb Waves in a Two-Layered Composite Plate

We analyze the effect of second-harmonic generation（SHG） of primary Lamb wave propagation in a two-layered composite plate, and then investigate the influence of interfacial properties on the said effect at low frequency. It is found that changes in the interfacial properties essentially affect the dispersion relation and then the maximum cumulative distance of the double-frequency Lamb wave generated. This will remarkably influence the efficiency of SHG. To overcome the complications arising from the inherent dispersion and multimode natures in analyzing the SHG effect of Lamb waves, the present work focuses on the analysis of the SHG effect of low-frequency dilatational Lamb wave propagation. Both the numerical analysis and finite element simulation indicate that the SHG effect of low-frequency dilatational Lamb wave propagation is found to be much more sensitive to changes in the interfacial properties than primary Lamb waves. The potential of using the SHG effect of low-frequency dilatational Lamb waves to characterize a minor change in the interfacial properties is analyzed.

Defects detection in typical positions of bend pipes using low-frequency ultrasonic guided wave

In order to analyze the possibility of detecting defects in bend pipe using low-frequency ultrasonic guided wave, the propagation of T(0,1) mode and L(0,2) mode through straight-curved-straight pipe sections was studied. FE(finite element) models of bend pipe without defects and those with defects were introduced to analyze energy distribution, mode transition and defect detection of ultrasonic guided wave. FE simulation results were validated by experiments of four different bend pipes with circumferential defects in different positions. It is shown that most energy of T(0,1) mode or L(0,2) mode focuses on extrados of bend but little passes through intrados of bend, and T(0,1) mode or L(0,2) mode is converted to other possible non-axisymmetric modes when propagating through the bend and the defect after bend respectively. Furthermore, L(0,2) mode is more sensitive to circumferential notch than T(0,1) mode. The results of this work are beneficial for practical testing of pipes.

Seasonal Variation of Stationary and Low-Frequency Rossby Wave Rays

The wave rays and their seasonal variation of stationary and low-frequency Rossby waves are studied by using the Runge-Kutta scheme. The results show that for stationary waves the rays can reach lower latitudes in winter, and are limited in higher latitudes in summer. The main differences between the stationary and low-frequency wave rays are that low-frequency waves can propagate across the equator and the easterlies will not be an obstacle on their propagation. It explained to some extent the interaction of disturbances between the Northern and Southern Hemispheres. The lower wave frequencies and the stronger easterly flow are, the more difficult low-frequency waves will be to propagate across the equator. The waves with 20-day period are easier to propagate across the equator than that with 50-day period. The winter is the most favorable season for low-frequency waves to propagate into another hemisphere.

Method for measuring the low-frequency sound power from a complex sound source based on sound-field correction in a non-anechoic tank

Similar to air reverberation chambers, non-anechoic water tanks are important acoustic measurement devices that can be used to measure the sound power radiated from complex underwater sound sources using diffusion field theory. However,the problem of the poor applicability of low-frequency measurements in these tanks has not yet been solved. Therefore,we propose a low-frequency acoustic measurement method based on sound-field correction(SFC) in an enclosed space that effectively solves the problem of measuring the sound power from complex sound sources below the Schroeder cutoff frequency in a non-anechoic tank. Using normal mode theory, the transfer relationship between the mean-square sound pressure in an underwater enclosed space and the free-field sound power of the sound source is established, and this is regarded as a correction term for the sound field between this enclosed space and the free field. This correction term can be obtained based on previous measurements of a known sound source. This term can then be used to correct the mean-square sound pressure excited by any sound source to be tested in this enclosed space and equivalently obtain its free-field sound power. Experiments were carried out in a non-anechoic water tank(9.0 m × 3.1 m × 1.7 m) to confirm the validity of the SFC method. Through measurements with a spherical sound source(whose free-field radiation characteristics are known),the correction term of the sound field between this water tank and the free field was obtained. On this basis, the sound power radiated from a cylindrical shell model under the action of mechanical excitation was measured. The measurement results were found to have a maximum deviation of 2.9 d B from the free-field results. These results show that the SFC method has good applicability in the frequency band above the first-order resonant frequency in a non-anechoic tank. This greatly expands the potential low-frequency applications of non-anechoic tanks.

Dispersion Equation of Low-Frequency Waves Driven by Temperature Anisotropy

The plasma temperature （or the kinetic pressure） anisotropy is an intrinsic characteristic of a collisionless magnetized plasma. In this paper, based on the two-fluid model, a dispersion equation of low-frequency （ω〈〈ωci, ωci the ion gyrofrequency） waves, including the plasma temperature anisotropy effect, is presented. We investigate the properties of low-frequency waves when the parallel temperature exceeds the perpendicular temperature, and especially their dependence on the propagation angle, pressure anisotropy, and energy closures. The results show that both the instable Alfven and slow modes are purely growing. The growth rate of the Alfven wave is not affected by the propagation angle or energy closures, while that of the slow wave depends sensitively on the propagation angle and energy closures as well as pressure anisotropy. The fast wave is always stable. We also show how to elaborate the symbolic calculation of the dispersion equation performed using Mathematica Notebook.

Modeling of low-frequency seismic waves in a shallow sea using the staggered grid difference method

Elastic waves in the seabed generated by low-frequency noise radiating from ships are known as ship seismic waves and can be used to detect and identify ships. To obtain the propagation characteristics of ship seismic waves, an algorithm for calculating Seismic waves at the seafloor is presented based on the staggered-grid finite difference method. The accuracy of the algorithm was tested by comparison with analytical solutions. Numerical simulation of seismic waves generated by a low-frequency point sotmd source in a typical shallow sea environment was carried out. Using various source frequencies and locations in the numerical simulation, we show that the seismic waves in the near field are composed mostly of transmitted S-waves and interface waves while transmitted P-waves are weak near the seafloor. However, in the far field, the wave components of the seismic wave are mainly normal modes and interface waves, with the latter being relatively strong in the waveforms, As the source frequency decreases, the normal modes become smaller and the interface waves dominate the time series of the seismic waves.

Low-Frequency Waves Forced by Large-scale Topography in the Barotropic Model

A barotropic model containing large-scale topography and zonal mean flow is established to discuss the effects of large-scale topography on the low-frequency waves. The results show that what affects low-frequency waves mostly is maximal height of topography and topographic slope. The former makes frequency of topographic Rossby waves decrease, the latter makes Rossby waves instable. Moreover, when topographic slope is appropriate, it can also make Rossby waves turn into low-frequency waves.

Improvement of Low-Frequency Sound Field Obtained by an Optimized Boundary

An approach based on the finite element analysis was introduced to improve low-frequency sound field. The optimized scatters on the wall redistribute the modes of the room and provide effective diffusion of sound field. The obtained through a 1：5 scaled set up. The results show that the optimized treatment has a positive effect on sound field and the improvement is obvious.

RADIATIVE COOLING AND BROADBAND PHENOMENON IN LOW-FREQUENCY WAVES

In this paper, we analyze the effects of radiative cooling on the pure baroclinic low-frequency waves under the approximation of equatorial β-plane and semi-geostrophic condition. The results show that radiative cooling does not, exclusively, provide the damping effects on the development of low-frequency waves.Under the delicate radiative-convective equilibrium, radiative effects will alter the phase speed and wave period,and bring about the broadband of phase velocity and wave period by adjusting the vertical profiles of diabaticheating. When the intensity of diabatic heating is moderate and appropriate, it is conductive to the de-velopment and sustaining of the low-frequency waves and their broadband phenomena, not the larger, the better. The radiative cooling cannot be neglected in order to reach the moderate and appropriate intensity of diabatic heating.

The study of sound wave propagation in rarefied gases using unified gas-kinetic scheme

Sound wave propagation in rarefied monatomic gases is simulated using a newly developed unified gaskinetic scheme （UGKS）. The numerical calculations are carfled out for a wide range of wave oscillating frequencies. The corresponding rarefaction parameter is defined as the ratio of sound wave frequency to the intermolecular particle collision frequency. The simulation covers the flow regime from the continuum to free molecule one. The treatment of the os- cillating wall boundary condition and the methods for eval- uating the absorption coefficient and sound wave speed are presented in detail. The simulation results from the UGKS are compared to the Navier-Stokes solutions, the direct sim- ulation Monte Carlo （DSMC） simulation, and experimental measurements. Good agreement with the experimental data has been obtained in the whole flow regimes for the corresponding Knudsen number from 0.08 to 32. The cur- rent study clearly demonstrates the capability of the UGKS method in capturing the sound wave propagation and its usefulness for the rarefied flow study.

Advances in Effects of Sound Waves on Plants

Sound waves technology has been applied to different plants. It has been found that sound waves were at different frequencies, sound pressure levels （SPLs）, exposure periods, and distances from the source of sound influence plant growth. Experiments have been conducted in the open field and under greenhouse growing conditions with different levels of audible sound frequencies and sound pressure levels. Sound waves at 1 kHz and 100 dB for 1 h within a distance of 0.20 m could significantly promote the division and cell wall fluidity of callus cells and also significantly enhance the activity of protective enzymes and endogenous hormones. Sound waves stimulation could increase the plant plasma-membrane IT-ATPase activity, the contents of soluble sugar, soluble protein, and amylase activity of callus. Moreover, sound waves could increase the content of RNA and the level of transcription. Stress-induced genes could switch on under sound stimulation. Sound waves at 0.1-1 kHz and SPL of （70＋5） dB for 3 h from plant acoustic frequency technology （PAFT） generator within a distance ranged from 30 to 60 m every other day significantly increased the yield of sweet pepper, cucumber and tomato by 30.05, 37.1 and 13.2%, respectively. Furthermore, the yield of lettuce, spinach, cotton, rice, and wheat were increased by 19.6, 22.7, 11.4, 5.7, and 17.0%, respectively. Sound waves may also strengthen plant immune systems. It has been proved that spider mite, aphids, gray mold, late blight and virus disease of tomatoes in the greenhouses decreased by 6.0, 8.0, 9.0, 11.0, and 8.0%, respectively, and the sheath blight office was reduced by 50%. This paper provides an overview of literature for the effects of sound waves on various growth parameters of plant at different growth stages.

Research on attenuation characteristic of sound wave in coal or rock body

In order to using power sound wave increase permeability of coal, rules of attenuation of sound wave in coal should be studied. In this paper, characteristic and mechanism of attenuation of sound wave in coal was researched according to acoustic theory and attenuation coefficients was estimated by acoustic parameter of coal. The research results show that the main attenuation mechanism of sound wave in coal is absorption attenuation and scattering attenuation. The absorption attenuation includes viscous absorption, thermal conduction absorption and relaxation absorption. Attenuation coefficient of sound wave in gaseous coal is 38.5 Np/m. Researches on attenuation characteristic of sound wave will provide the theoretical basis for power sound wave improving permeability of coal and accelerating desorption of coal bed gas.

Study on Reduction of Mixed Water Salinity by Sound Wave <br/>—Toward Water Scarcity Issue-Solving in Isolated Islands in the World

There are so many Isolated Islands (inhabited islands) in the world, including Japan. However, at present islanders, there have been faced with the decline of industries, serious concerns of rapid aging and very low birthrate without children and water scarcity issues etc. It can be said that these situations are under the environment which shows a microcosm of Japanese and/or world survival society in the near future. In this paper, the experimental data on the reduction of the mixed water (seawater & rainwater) salinity by the sound wave when changing the volume ratio were first shown, taking into the characteristics of the Isolated Islands. Next, the main analysis result on the water qualities of mixed water with which sound wave was irradiated was shown and the consideration mainly based on the WHO drinking water quality standards was carried out. Finally, through a simple water quality improvement apparatus using small hydroelectric power, a consideration regarding a possibility of the purification of the water (to be a drinking water) based on the solar circulation energy (regenerative type’s natural energy) such as small hydropower utilization, natural sunlight utilization, natural gravity utilization, natural oscillation utilization has been described in the paper.

Improvement of Water and Wastewater Treatment Process Using Various Sound Waves—A Consideration from the Viewpoint of Frequency

Application of sound waves is one of the novel techniques for the improvement of water treatment process. In this study, various sound waves such as 1) ultrasonic wave, 2) music box, and 3) windbell were irradiated to water and wastewater for removing contaminants such as nitrate, phosphorus and BOD/COD. As a result, a possibility of improvement of water and wastewater treatment process using sound waves with various frequencies was proposed.

Some Aspects of Ray Representation Running Sound Waves in Liquid Spaces

Work is devoted to the analysis of errors meeting in literature in treatment of a spatial part of a phase of running sound waves. In some cases, it is not taken into consideration that this part of a phase is formed by scalar product of vectors which does not depend on a choice of system of co-ordinates. Taking into account the necessary corrections in record of a phase of plane waves, it is shown that the decision of the homogeneous wave equation in the form of “belated” potentials is simultaneously and the decision of the equations of movement of a liquid, and “outstripped” potentials does not satisfy them. The analysis of coefficients of reflection and passage of running waves in non-uniform space is carried out. It is shown that on boundary of spaces with different sound speeds, a turning point of a sound wave is the point of full internal reflection. The way of calculation of coefficients of reflection and passage is offered by consideration of all three waves on boundary of spaces as vectors with the set directions and amplitude of a falling wave. Calculation of coefficients of reflection and passage of a sound wave in a wave-guide of canonical type along the chosen trajectory by two methods—under traditional formulas and a vector method is carried out. Results of calculation practically coincide.

Impacts of SST and SST Anomalies on Low-Frequency Oscillation in the Tropical Atmosphere

Considering the multiscale character of LFO effects of SST on LFO in the tropical atmosphere （low-frequency oscillation） in the tropical atmosphere, the are discussed by using an absolute ageostrophic, baroclinic model. Here, SST effects include sea surface heating and forcing of SST anomalies （SSTAs）. Studies of the influences of sea surface heating on LFO frequency and stability show that sea surface heating can slow the speed of waves and lower their frequency when SST is comparatively low; while higher SST leads to unstable waves and less periods of LFO. Since the impact of a SSTA on ultra-long waves is more evident than that on kilometer-scale waves, long-wave approximation is used when we continue to study the effect of SSTAs. Results indicate that SSTAs can lead to a longer period of LFO, and make waves unstable. In other words, positive （negative） SSTAs can make waves decay （grow）.

The Effect of Wood Condition on Sound Wave Propagation

This experiment aims to study the effects and modifications that occurred on acoustic signal harmonics when travelling through wood. The experiment measured the output amplitudes and frequencies of the travelling signals and compared them with the original input signal. The factors under investigation in this experiment included: wood type, wood moisture content (MC), input signal frequencies, signal travelling distance and wood condition (wood with/without cracks). The experiment findings demonstrated that higher input signal frequencies results in higher attenuation of acoustic emissions (AE) travelling through the wood. The results also indicate that: wood type, MC, the signal’s travelling distance, and the orientation of the travelling signal, compared to the wood’s grain direction, affected the signal propagation.