High-chromium vanadium-titanium magnetite all-pellet integrated burden optimization and softening-melting behavior based on flux pellets

High-chromium vanadium-titanium magnetite(HVTM)is a crucial polymetallic-associated resource to be developed.The allpellet operation is a blast furnace trend that aims to reduce carbon dioxide emissions in the future.By referencing the production data of vanadium-titanium magnetite blast furnaces,this study explored the softening-melting behavior of high-chromium vanadium-titanium magnetite and obtained the optimal integrated burden based on flux pellets.The results show that the burden with a composition of 70wt%flux pellets and 30wt%acid pellets exhibits the best softening-melting properties.In comparison to that of the single burden,the softening-melting characteristic temperature of this burden composition was higher.The melting interval first increased from 307 to 362℃and then decreased to 282℃.The maximum pressure drop(ΔPmax)decreased from 26.76 to 19.01 kPa.The permeability index(S)dropped from 4643.5 to 2446.8 kPa·℃.The softening-melting properties of the integrated burden were apparently improved.The acid pellets played a role in withstanding load during the softening process.The flux pellets in the integrated burden exhibited a higher slag melting point,which increased the melting temperature during the melting process.The slag homogeneity and the TiC produced by over-reduction led to the gas permeability deterioration of the single burden.The segregation of the flux and acid pellets in the HVTM proportion and basicity mainly led to the better softening-melting properties of the integrated burden.

A new approach for recycling arsenic and tin from low-grade tin middlings using a self-sulfurization roasting

Massive amounts of low-grade tin middlings have been produced from tin tailings,in which arsenic and tin are worthy to be recycled.Owing to high sulfur content in these tin middlings,a novel self-sulfurization roasting was proposed to transform,separate and recover arsenic and tin in this research.There was no extra curing agent to be added,which decreased the formation of pollutant S-containing gas.The self-sulfurization process involved a two-stage roasting of reduction followed by sulfurization.First in reduction roasting,FeAsS decomposed to FeS and As and the As then transformed to As_(4)(g)and As_(4)S_(4)(g),via which the arsenic was separated and recovered.The arsenic content in the first residue could be decreased to 0.72 wt.%.Accompanied with it,the FeS was firstly oxidized to Fe_(1−x)S and then to SO_(2)(g)by the coexisted Fe_(2)O_(3),and finally reduced and combined with the independent Fe_(2)O_(3)to form Fe_(1−x)S.In the followed sulfurization roasting,the Fe_(1−x)S sulfurized SnO_(2)to SnS(g),due to which tin could be recovered and its content in the second residue decreased to 0.01 wt.%.This study provided an efficient method to separate and recover arsenic and tin from low-grade tin middlings.

Asymptomatic low-grade appendiceal mucinous neoplasm:A case report

BACKGROUND Low-grade appendiceal neoplasms(LAMN)are characterized by low incidence and atypical clinical presentations,often leading to misdiagnosis as acute or chronic appendicitis before surgery.The primary diagnostic tool for LAMN is abdominal computed tomography(CT)imaging.Surgical resection remains the cornerstone of LAMN management,necessitating en bloc tumor excision to minimize the risk of iatrogenic rupture.Laparoscopy,known for its minimal invasiveness,reduced postoperative discomfort,and expedited recovery,is a safe and reliable approach for LAMN treatment.Despite the possibility of pseudomyxoma peritonei development,appendectomy and partial appendectomy generally result in negative tumor margins and favorable outcomes,which can be attributed to the disease’s slow growth and lower malignancy.CASE SUMMARY A 71-year-old male patient was admitted to our hospital with a pelvic spaceoccupying lesion detected 1 mo prior.Physical examination showed a soft abdomen without tenderness or rebound and no palpable masses.No shifting dullness was noted,and digital rectal examination revealed no palpable mass.Enteroscopy revealed a raised,smooth-surfaced mass measuring 3.0 cm in the cecum.Abdominal contrast-enhanced CT showed a markedly thickened and dilated appendix with visible cystic shadows.Laparoscopic surgery was performed and revealed a significantly dilated appendix,leading to laparoscopic resection of the appendix and part of the cecum.Post-surgical pathologic analysis confirmed LAMN.The patient received symptomatic and supportive post-operative care and was discharged on postoperative day 4 without complications such as abdominal bleeding,intestinal obstruction,or incision infection.No tumor recurrence was observed during a 7-mo follow-up period.CONCLUSION LAMN is a rare disease that lacks specific clinical manifestations.Abdominal CT plays a crucial role in diagnosing LAMN,and laparoscopic surgery is a safe and effective diagnostic and therapeutic approach.

Low-grade myofibrosarcoma of the maxillary sinus:Two case reports

BACKGROUND Low-grade myofibroblastic sarcoma(LGMS)is an extremely rare tumor characterized by the malignant proliferation of myofibroblasts.LGMS most commonly develops in adults,predominantly in males,in the head and neck region,oral cavity,especially on the tongue,mandible,and larynx.This article presents 2 cases of LGMS localized to the maxillary sinus and provides an overview of the available literature.CASE SUMMARY Two patients with LGMS located in the maxillary sinus underwent surgery at the Department of Head and Neck Surgery.Case 1:A 46-year-old patient was admitted to the clinic with suspected LGMS recurrence in the right maxillary sinus(rT4aN0M0),with symptoms of pain in the suborbital area,watering of the right eye,thick discharge from the right nostril,and augmented facial asymmetry.After open biopsy-confirmed LGMS,the patient underwent expanded maxillectomy of the right side with immediate palate reconstruction using a microvascular skin flap harvested surgically from the middle arm.The patient qualified for adjuvant radiotherapy for the postoperative bed,with an additional margin.Currently,the patient is under 1.5 years of observation with no evidence of disease.Case 2:A 45-year-old man was admitted to our clinic with facial asymmetry,strabismus,exophthalmos,and visual impairment in the right eye.Six months earlier,the patient had undergone partial jaw resection at another hospital for fibromatosis.A contrast-enhanced computed tomography scan revealed a tumor mass in the postoperative log after an earlier procedure.An open biopsy confirmed lowgrade fibrosarcoma(rT4aN0M0).The patient qualified for an extended total right maxillectomy with orbital excision and right hemimandibulectomy with immediate microvascular reconstruction using an anterolateral thigh flap.The patient subsequently underwent adjuvant radiotherapy to the postoperative area.After 9 months,recurrence occurred in the right mandibular arch below the irradiated area.The lesion infiltrated the base of the skull,which warranted the withdrawal of radiotherapy and salvage surgery.The patient qualified for palliative chemotherapy with a regimen of doxorubicin+dacarbazine+cyclophosphamide and palliative radiotherapy for bone metastases.The patient died 26 months after surgical treatment.The cases have been assessed and compared with cases in the literature.CONCLUSION No specific diagnostic criteria or treatment strategies have been developed for LGMS.The treatment used for LGMS is the same as that used for sinonasal cancer radical tumor excision;adjuvant radiotherapy or chemoradiotherapy should also be considered.They have low malignant potential but are highly invasive,tend to recur,and metastasize to distant sites.Patients should undergo regular follow-up examinations to detect recurrence or metastasis at an early stage.Patients should be treated and observed at the highest referral centers.

Application of NSR-AISC Method in Reserve Estimation and Technical Economic Evaluation of Low-Grade Polymetallic Deposits: Taking a Low-Grade Copper-Molybdenum Mine in Guangdong Province as an Example

The development and utilization of low-grade polymetallic deposits with strategic mineral resources is one of the important measures to alleviate the current high dependence on strategic mineral resources in China. However, domestic mining enterprises and most mining consulting and design institutes usually use general industrial indicators to carry out reserve estimation and technical and economic feasibility studies on low-grade polymetallic deposits, which cannot truly reflect the economic value of such deposits. The article expounds on the definitions of net return value (NSR) and on-site total maintenance cost (AISC) of common ore smelters in the evaluation of overseas mineral resources. Taking a low-grade polymetallic copper-molybdenum mine in Guangdong Province as an example, comparing the research results showed the NSR-AISC method and the general industrial index method in low-grade polymetallic deposit. There are huge differences in the results of reserve estimation;through the further introduction of Taylor’s formula and the research results on the relationship between investment intensity and production scale, a more reasonable mine life and investment scale are recommended, and a more in-depth comparative study has been carried out in the dimension of technical and economic indicators. Based on the comparative study of the above two methods in reserve estimation and the evaluation results of technical and economic indicators, the author believes that the NSR-AISC method can better reflect the true value of low-grade polymetallic ore projects, and should be popularized and applied in resource evaluation and development practice. This article further describes the application status of the NSR-AISC method for reserve estimation and the evaluation of technical economic indicators, and suggests the main points that should be paid attention to in the use of the NSR-AISC method.

Production and Characterization of Green Biosorbent Based on Modified Corn Cob Decorated Magnetite Nanoparticles

In most developing countries, particularly in the countries of sub-Saharan Africa, corn cobs are considered as waste polluting the environment during the harvest period of this cereal. In order to valorize this agricultural waste, high-performance, inexpensive and low-energy consumption magnetic bioadsorbents were prepared from corn cobs. The chemically activated raw corn cob was magnetized by coating the surface with magnetite nanoparticles. The prepared biosorbents were characterized by FT-IR, XRD, FE-SEM associated with EDX, HR-TEM, TG analysis, BET surface area analysis and XPS. The maximum specific surface area of 35.22 m2/g was reached. An attempt to use of these magnetic biosorbents for the removal of heavy metal like Cr(VI) from aqueous solution was envisaged.

Oxidation behavior of low-grade vanadiferous titanomagnetite concentrate with high titanium

In order to clarify the oxidation mechanisms and make better use of the low-grade vanadiferous titanomagnetite concentrate with high titanium(LVTC),the oxidation behavior of LVTC was investigated.The results showed that oxidation degree was achieved within 90 min when temperature was not lower than 700°C,and the main phases of the oxidized LVTC consisted of Fe9TiO15,Fe2O3,CaSiTiO5 and a small amount of Fe2.75Ti0.25O4.Increasing temperature is favorable to the formation of Fe2TiO5.The surface of LVTC gradually becomes rough,with fine particles of needle-like and granular shape appearing on the surface,which finally turn from laminar to creamy,spread out,and are interspersed with many tiny holes.The phase oxidation paths in LVTC were as follows:(1)Fe2.75Ti0.25O4→Fe9TiO15+Fe2O3;(2)Fe2.75Ti0.25O4→Fe2O3+FeTiO3→Fe2TiO5;(3)FeTiO3→Fe2O3+Fe2Ti3O9→Fe2TiO5.LVTC is predominantly mesoporous whether oxidized or not,with the pores mainly distributed in the range of 2–40 nm,and the specific surface area of LVTC decreases significantly with increasing temperature.

Thermally Chargeable Proton Capacitor Based on Redox-Active Effect for Energy Storage and Low-Grade Heat Conversion

Thermal energy is abundantly available in our daily life and industrial production,and especially,low-grade heat is often regarded as a byproduct.Collecting and utilizing this ignored energy by low-cost and simple technologies may become a smart countermeasure to relieve the energy crisis.Here,a unique device has been demonstrated to achieve high value-added conversion of low-grade heat by introducing redox-active organic alizarin(AZ)onto N-doped hollow carbon nanofibers(N–HCNF)surface.As-prepared N–HCNF/AZ can deliver a high specific capacitance of 514.3 F g^(-1)(at 1 A g^(-1))and an outstanding rate capability of 60.3%even at 50 A g^(-1).Meanwhile,the assembled symmetric proton capacitor can deliver a high energy density of 28.0 Wh kg^(-1) at 350.0 W kg^(-1) and a maximum power density of 35.0 kW kg^(-1) at 17.0 Wh kg^(-1).Significantly,the thermally chargeable proton capacitors can attain a surprisingly high Seebeck coefficient of 15.3 mV K^(-1) and a power factor of 6.02µW g^(-1).Taking advantage of such high performance,a satisfying open-circuit voltage of 481.0 mV with a temperature difference of 54 K is achieved.This research provides new insights into construction of high value-added energy systems requiring high electrochemical performances.

Anlotinib in combination with pembrolizumab for low-grade myofibroblastic sarcoma of the pancreas: A case report

BACKGROUND Low-grade myofibroblastic sarcoma(LGMS)is a rare spindle cell sarcoma espe-cially in the pancreas,with myofibroblastic differentiation.Hitherto,only a few cases have been reported.CASE SUMMARY Herein,we report a case involving the discovery of a pancreatic mass detected during a routine physical examination.Subsequent imaging and pathological tests of the patient led to the diagnosis of LGMS of the pancreas.Following surgical intervention,the patient experienced recurrence and metastasis.Conventional treatment is not effective for postoperative recurrent pancreatic LGMS with multiple metastases.After communicating with the patients and their families,informed consent was obtained for the treatment of anlotinib combined with pembrolizumab.Evaluation of imaging and clinical symptoms post-treatment revealed a relatively favorable response to the combination of anlotinib and pembrolizumab.CONCLUSION Based on the comprehensive literature review,our report aimed to provide evidence for a better understanding of the disease characteristics,diagnostic criteria,imaging findings,and identification of LGMS.And explore novel treatment strategies for this disease.

Oxidation process of low-grade vanadium slag in presence of Na_(2)CO_3

The oxidation process of low-grade vanadium slag in the presence of Na2CO3 was investigated by XRD,SEM/EDS and TG-DSC techniques.The results show that the vanadium slag is oxidized in a temperature range from 273 to 700 °C.Olivine phases and spinel phases are completely decomposed at 500 and 600 °C,respectively.Most of water-soluble sodium vanadates are formed between 500 and 600 °C.When roasting temperature reaches above 700 °C,the vanadium-rich phases of sodium vanadates can be obviously observed.However,at temperature above 800 °C,the samples are sintered.Most of the vanadium is enwrapped by glassy phase compounds which lead to the decrease of the leaching rate of vanadium.At the same time,the effect of roasting temperature on extraction of vanadium and characterization of leach residues were discussed.

Solid-state reduction kinetics and mechanism of pre-oxidized vanadium-titanium magnetite concentrate

The solid-state reduction kinetics of pre-oxidized vanadium-titanium magnetite concentrate was studied. The phase and microstructure of the reduction product were characterized by XRD, SEM and EDS methods, based on which the mechanism of the solid-state reduction was investigated. The results showed that using coal as reductant at 950-1100 °C, the solid-state reduction of the pre-oxidized vanadium-titanium magnetite concentrate was controlled by interface chemical reaction and the apparent activation energy was 67.719 k J/mol. The mineral phase transformation during the reduction process can be described as follows： pre-oxidized vanadium-titanium magnetite concentrate → ulvospinel → ilmenite → Fe Ti2O5 →（FenTi1-n）Ti2O5. M3O5-type（M can be Fe, Ti, Mg, Mn, etc） solid solutions would be formed during the reduction process of the pre-oxidized vanadium-titanium magnetite concentrate at 1050 °C for 60 min. The poor reducibility of iron in M3O5 solid solutions is the main reason to limit the reduction property of pre-oxidized vanadium-titanium magnetite concentrate.

Effect of basicity on sintering behavior of low-titanium vanadium-titanium magnetite

Basicity has an important effect on the sinter quality, especially for low-titanium vanadium-titanium sinter. The effect of basieity on sintering behavior of low-titanium vanadium-titanium mixture, and the transference and distribution of element in sintering process were researched by sinter pot test, mineralogical analysis, scanning electron microscopy （SEM） and energy dispersive spectroscopy （EDS） analysis. The results show that CaO preferentially reacts with TiO2, generating pervoskite, so that the total liquid phase content of the sinter is low. There is an increase in the perovskite concentration of the sinter with the basicity ranging from 1.9：1 to 2.7：1. With increasing the basicity, the calcium ferrite content increases slightly and then rises rapidly, while the silicate content decreases and the metallurgical property of the sinter is improved. As for the distribution of these elements in the sinter, Ti occurs mainly in perovskite, V occurs mainly in silicate, and Fe occurs mainly in magnetite and hematite. The most abundant occurrence of Ca and Si occurs in silicate and perovskite. With increasing the basicity, the contents of A1 and Mg increase in calcium ferrite, while they decrease in other minerals.

Leaching kinetics of low-grade copper ore containing calcium-magnesium carbonate in ammonia-ammonium sulfate solution with persulfate

The leaching kinetics of copper from low-grade copper ore was investigated in ammonia-ammonium sulfate solution with sodium persulfate. The effect parameters of stirring speed, temperature, particle size, concentrations of ammonia, ammonium sulfate and sodium persulfate were determined. The results show that the leaching rate is nearly independent of agitation above 300 r/min and increases with the increase of temperature, concentrations of ammonia, ammonium sulfate and sodium persulfate. The EDS analysis and phase quantitative analysis of the residues indicate that bornite can be dissolved by persulfate oxidization. The leaching kinetics with activation energy of 22.91 kJ/mol was analyzed by using a new shrinking core model （SCM） in which both the interfacial transfer and diffusion across the product layer affect the leaching rate. A semi-empirical rate equation was obtained to describe the leaching process and the empirical reaction orders with respect to the concentrations of ammonia, ammonium sulfate and sodium persulfate are 0.5, 1.2 and 0.5, respectively.

Conversion of ferric oxide to magnetite by hydrothermal reduction in Bayer digestion process

Digesting aluminum-bearing minerals and converting ferric oxide to magnetite simultaneously in Bayer digestion process is crucially important to deal with high-iron diasporic bauxite economically for alumina production.The reaction behaviors of hydrothermal reduction of ferric oxide in alkali solution were studied by both thermodynamic calculation and experimental investigation.The thermodynamic calculation indicates that Fe3O4 can be formed by the conversion of Fe2O3 at proper redox potentials in alkaline solution.The experimental results show that the formation ratio of Fe3O4 either through the reaction of Fe and Fe2O3 or through the reaction of Fe and H2O in alkaline aqueous solution increases remarkably with raising the temperature and alkali concentration,suggesting that Fe（OH）3- and Fe（OH）4- form by dissolving Fe and Fe2O3,respectively,in alkaline aqueous solution and further react to form Fe3O4.Moreover,aluminate ions have little influence on the hydrothermal reduction of Fe2O3 in alkaline aqueous solution,and converting iron minerals to magnetite can be realized in the Bayer digestion process of diasporic bauxite.

Effect of MgO content in sinter on the softening–melting behavior of mixed burden made from chromium-bearing vanadium–titanium magnetite

The effect of sinter with different MgO contents on the softening-melting behavior of mixed burden made from chro- mium-bearing vanadium-titanium magnetite was investigated. The results show that with increasing MgO content in the sinter, the softening interval and melting interval increased and the location of the cohesive zone shifted downward slightly and became moderately thicker. The softening-melting characteristic value was less pronounced when the MgO content in the sinter was 2.98wt%-3.40wt%. Increasing MgO content in the sinter reduced the content and recovery of V and Cr in the dripped iron. In addition, greater MgO contents in the sinter resulted in the generation of greater amounts of high-melting-point components, which adversely affected the permeability of the mixed burden. When the softening-melting behavior of the mixed burden and the recovery of valuable elements were taken into account, proper MgO con- tents in the sinter and slag ranged from 2.98wt% to 3.40wt% and from 11.46wt% to 12.72wt%, respectively, for the smelting of burden made from chromium-bearing vanadium-titanium magnetite in a blast furnace.

Exsolutions of Diopside and Magnetite in Olivine from Mantle Dunite,Luobusa Ophiolite,Tibet,China

The exsolutious of diopside and magnetite occur as intergrowth and orient within olivine from the mantle dunite, Luobusa ophiolite, Tibet. The dunite is very fresh with a mineral assemblage of olivine （〉95%） ＋ chromite （1%-4%） ＋ diopside （〈1%）. Two types of olivine are found in thin sections： one （Fo = 94） is coarse-grained, elongated with development of kink bands, wavy extinction and irregular margins; and the other （Fo = 96） is fine-grained and poly-angied. Some of the olivine grains contain minor Ca, Cr and Ni. Besides the exsolutions in olivine, three micron-size inclusions are also discovered. Analyzed through energy dispersive system （EDS） with unitary analytical method, the average compositions of the inclusions are： Na20, 3.12%-3.84%; MgO, 19.51%-23.79%; Al2O3, 9.33%-11.31%; SiO2, 44.89%-46.29%; CaO, 11.46%-12.90%; Cr2O3, 0.74%-2.29%; FeO, 4.26%- 5.27%, which is quite similar to those of amphibole. Diopside is anhedral f＇dling between olivines, or as micro-inclusions oriented in olivines. Chromite appears euhedral distributed between olivines, sometimes with apparent compositional zone. From core to rim of the chromite, Fe content increases and Cr decreases; and A! and Mg drop greatly on the rim. There is always incomplete magnetite zone around the chromite. Compared with the nodular chromite in the same section, the euhedral chromite has higher Fe3O4 and lower MgCr2O4 and MgAI2O4 end member contents, which means it formed under higher oxygen fugacity environment. With a geothermometer estimation, the equilibrium crystalline temperature is 820℃-960℃ for olivine and nodular chromite, 630℃-770℃ for olivine and euhedral chromite, and 350℃-550℃ for olivine and exsoluted magnetite, showing that the exsolutions occurred late at low temperature. Thus we propose that previously depleted mantle harzburgite reacted with the melt containing Na, Al and Ca, and produced an olivine solid solution added with Na^＋, Al^3＋, Ca^2＋, Fe^3＋, Cr^3＋. With temperature decreasing, the olivine solid solution decomposed; and Fe^3＋, Cr^3＋ diffused into magnetite and Ca^2＋ and Na^＋ into clinopyroxene, both of which formed intergrowth textures. A few Fe^3＋ and Cr^3＋ entered interstitial chromite. Through later tectonism, the peridotite recrystallized and formed deformational coarse grained olivine, fine grained and poly-angled olivine, and euhedral grained chromite. Due to the fast cooling rate of the rock or rapid tectonic emplacement, the exsolution textures in olivine and compositional zones of chromite are preserved.

Some basic properties of granules from ore blends consisting of ultrafine magnetite and hematite ores

Some basic properties of granules,including the granule size distribution,packed-bed permeability,and chemical composition of the adhering layer,were investigated in this study for four iron ore blends consisting of 5wt%,25wt%,and 45wt%ultrafine magnetite and 25wt%ultrafine hematite concentrates.The effects of varying the sinter basicity(CaO/SiO2 mass ratio=1.4 to 2.2)and adding ultrafine concentrates on the variation of the adhering-layer composition and granule microstructure were studied.Moreover,the effect of adhering-layer compositional changes on sintering reactions was discussed in combination with pot sintering results of ore blends.Increasing sinter basicity led to an increase in the basicities of both the adhering layer and the fine part of the sinter mix,which were higher than the overall sinter basicity.When the sinter chemistry was fixed and fine Si-bearing materials(e.g.,quartz sand)were used,increasing the amount of ultrafine ores in the ore blends tended to reduce the adhering-layer basicity and increase the SiO2 content in both the adhering layer and the fine part of the sinter mix,which will induce the formation of low-strength bonding phases and the deterioration of sinter strength.The adhering-layer composition in granules can be estimated in advance from the compositions of the-1 mm fractions of the raw materials.

Mineralogy and carbothermal reduction behaviour of vanadium-bearing titaniferous magnetite ore in Eastern India

Vanadium-beaxing titaniferous magnetite bands hosted by Precambrian gabbro-norite-anorthositic rocks or their metamorphic equivalents were discovered in some parts of Eastern Indian Shield, containing 48%-49% Fe （total）, 10%-25% TiO2, and 0.3%-2.20% V2O5 by mass. Mineralogical and petrological study, composition, and characterization of the vanadium-bearing titaniferous magnetite ore were carried out by scanning electron microscopy-energy dispersive X-ray （SEM-EDX）, wave length X-ray florescence （WDXRF）, inductively coupled plasma-atomic emission spectroscopy （ICP-AES）, X-ray diffraction （XRD）, etc. Chemical beneficiation for valuable metals, such as Fe, Ti, andV, was performed by reduction roasting. The direct and indirect reduction were investigated by mixing the lump ore with solid activated charcoal in a closed reactor and purging the reducing gas mixture in standard reducibility index apparatus at different temperatures and time intervals. The reduction roasting parameters were optimized. Finally, the reduced samples were crushed and upgraded by magnetic separation. The results show that, the maximum mass fractions of magnetic and nonmagnetic parts achieved axe 69.36% and 30.64%, respectively, which contain 10.6% TiO2 and 0.84% V205 in the magnetic part and 36.5% TiO2 and 0.22% V205 in the nonmagnetic part.

Oxidation behavior of artificial magnetite pellets

The oxidation behavior of artificial magnetite pellets was investigated through measurements of the oxidation degree and mineralogical analysis. The results show that artificial magnetite pellets are much easier to oxidize than natural magnetite. The oxidation is controlled through two different reaction mechanisms. The oxidation of artificial magnetite is dominated by internal diffusion, with an activation energy of 8.40 kJ/mol, at temperatures less than 800°C, whereas it is controlled by chemical reaction, with a reaction activation energy of 67.79 kJ/mol, at temperatures greater than 800°C. In addition, factors such as the oxygen volume fraction and the pellet diameter strongly influence the oxidation of artificial magnetite: a larger oxygen volume fraction and a smaller pellet diameter result in a much faster oxidation process.

Metalizing reduction and magnetic separation of vanadium titano-magnetite based on hot briquetting

To achieve high efficiency utilization of Panzhihua vanadium titano-magnetite, a new process of metalizing reduction and magnetic separation based on hot briquetting is proposed, and factors that affect the cold strength of the hot-briquetting products and the efficiency of reduction and magnetic separation are successively investigated through laboratory experiments. The relevant mechanisms are elucidated on the basis of microstructural observations. Experimental results show that the optimal process parameters for hot briquetting include a hot briquetting temperature of 475°C, a carbon ratio of 1.2, ore and coal particle sizes of less than 74 μm. Additionally, with respect to metalizing reduction and magnetic separation, the rational parameters include a magnetic field intensity of 50 mT, a reduction temperature of 1350°C, a reduction time of 60 min, and a carbon ratio of 1.2. Under these above conditions, the crushing strength of the hot-briquetting agglomerates is 1480 N, and the recovery ratios of iron, vanadium, and titanium are as high as 91.19%, 61.82%, and 85.31%, respectively. The new process of metalizing reduction and magnetic separation based on hot briquetting demonstrates the evident technological advantages of high efficiency separation of iron from other valuable elements in the vanadium titano-magnetite.